How Hard is it to Install a Redarc Tow Pro Elite for NP300 Nissan Navara?

Поделиться
HTML-код
  • Опубликовано: 13 май 2020
  • Its well known that the Redarc Tow Pro Elite is a good bit of kit, the real question is how hard is it to install? I've put this into a wagon before but a ute is a whole different story. Getting power to the back, picking up the right wires seems insurmountable, but Redarc has a kit to make my life easy.

Комментарии • 36

  • @OverlandUnknown
    @OverlandUnknown 2 года назад +2

    excellent video mate, I also have a NP300. It helped a lot. Cheers, Grant.

  • @MudducksTouringAustralia
    @MudducksTouringAustralia 4 года назад +1

    I love tow pros Dave Im onto my 4th one, (4 different trucks) Good clip mate. Stay safe. Cheers Steve

  • @joshsparkman2060
    @joshsparkman2060 Год назад

    1 minute into the video and i liked and subbed. Great work!

  • @mavo0673
    @mavo0673 4 года назад +2

    Install one of these whole system in the 200 series with the wiring harness from redarc I've got 2 of the elite3 units . Redarc is by far the only thing I'll use coat hanger works best for the fire wall

  • @adrianbrown3524
    @adrianbrown3524 2 года назад

    Any tips to remove the dash panel where you mounted the unit?

  • @lloydw.3950
    @lloydw.3950 4 года назад +1

    Just noticed something that you might want to double check....in the video when you are under the back of the tub connecting the wiring loom, it looks like one of the bolts on your towbar is not done up properly. Hard to tell on my crappy computer, but the bolt nearest to the wiring plugs you connected (into the side of the chassis) appears to be near fully undone. Not sure if this may be because you have undone/removed something for the purpose of filming, or whether it may have been missed when the towbar was installed. Cheers mate, and even some of us Toyota owners like watching your videos. Keep up the great work.

    • @DASHOffRoad
      @DASHOffRoad  4 года назад +2

      You have a very keen eye there. Actually the tow bar is a prototype that I was mucking around with at the same time. It comes off tomorrow for the next model to be bolted up 👍. Secretly, I do like Land Cruisers too 🤫

  • @mannymx51
    @mannymx51 3 года назад

    Nice setup mate. So about how heavy is that trailer you are towing? I just got me a 2021 Navara (Frontier in Mexico). 2.5L Diesel. Some changes to the grill. Not a lot of change. I am looking at getting a tow hitch next. Specs say this truck could tow 3.5 Ton. Has me thinking when most class III hitches are rated for 6000 lbs only. Great looking truck! What size tires are you runing? 285/70R17?

    • @DASHOffRoad
      @DASHOffRoad  3 года назад +1

      Correct, running 33’s and towing 3T, poorly

    • @mannymx51
      @mannymx51 3 года назад

      Yea watching the video you uploaded i could see the trailer swirving some. Thats never a good feeling. Does your truck have leaf springs on rear? Mine has coil springs which I thought was a bit bizarre for the towing capacity stated by the manufacturer

  • @lifestyledownunderadventur5456
    @lifestyledownunderadventur5456 2 года назад

    Hey mate love the video !!
    Just wondering do you need to buy any extra bits for the np300 or does the kit come completely ready to go ?

  • @michaelbui4141
    @michaelbui4141 4 года назад

    Great video mate, what rear bar have you got there on the back of the Nav there?

    • @DASHOffRoad
      @DASHOffRoad  4 года назад +2

      It’s one I bring on myself. Check it out at www.dashoffroad.com.au

    • @michaelbui4141
      @michaelbui4141 4 года назад

      @@DASHOffRoad thanks mate. Looks great. Will definitely be getting one for myself

  • @ollysfishing4231
    @ollysfishing4231 2 года назад +1

    all well and good except redarc no longer does wiring harnesses to suit an np300, its now universal

  • @Zapo9668
    @Zapo9668 2 года назад

    How does it break the actual trailer? Is there another unit which goes on the trailer? And does it have an electronic actuator?

    • @DASHOffRoad
      @DASHOffRoad  2 года назад

      It’s assumed that your trailer already has brakes

    • @Zapo9668
      @Zapo9668 2 года назад

      @@DASHOffRoad what type of breaks? Most trailers just have mechanical breaks with cables. How would some eletrical device affect the trailers breaking?

    • @user-bb7jx8tc8d
      @user-bb7jx8tc8d 2 года назад +1

      @@Zapo9668 Electric brakes...

  • @jodyherd2010
    @jodyherd2010 4 года назад +1

    Hey mate. How does the Nav tow that van.

    • @DASHOffRoad
      @DASHOffRoad  4 года назад

      I’ll let you know, haven’t had the opportunity yet

    • @mavo0673
      @mavo0673 4 года назад

      Not any were as good as the y62 grunt machine 😁😁😁😁😁

  • @KJPage
    @KJPage 2 года назад +1

    I almost didn't buy because I would have preferred an Ethernet cable too.

  • @joshuawood2777
    @joshuawood2777 2 года назад

    Hey mate wouldn't have a part number for the wiring kit would make my life so much easier haha

    • @josh9889
      @josh9889 2 года назад

      On there website man just click the button next to what eva car u need it for

  • @Nick-gs3sm
    @Nick-gs3sm 3 года назад +1

    I get the impression you're a fan of Redarc mate.

    • @DASHOffRoad
      @DASHOffRoad  3 года назад

      Yeah I like there brake controllers and DCBC chargers. Good SA Company 👌

    • @jonponton
      @jonponton 2 года назад

      He's comprehensively comprehensive about the comprehensiveness of this comprehensive unit.

  • @cdambartman
    @cdambartman 4 года назад

    Judge Chamberlain Haller:
    ...Ah, the two what? Uh... uh, what was that word?
    David Dash:
    Uh... what word?
    Judge Chamberlain Haller:
    Uh... did you say "utes"?
    David Dash:
    Yeah, two utes.
    Judge Chamberlain Haller:
    What is a ute?
    David Dash:
    Oh, excuse me, Your Honor...
    David Dash:
    two TRUUUUCCKKKKS.

  • @ToddHendry
    @ToddHendry 4 года назад

    What are you going to tow with the Navara?

    • @ToddHendry
      @ToddHendry 4 года назад

      Shoulda waited till the end of the video.