BMW E46 $100 eBay TURBO BUILD PT.5 - Installing the Turbo, Intercooler and Charge Pipe!
HTML-код
- Опубликовано: 18 сен 2024
- LINKS BELOW - MAIN TURBO COMPONENTS (Required)________________________________
_______________________________________________________________________________________
Turbo Manifold K64 ---
k64performance...
Charge Pipe + Intercooler Bracket K64 ---
k64performance...
Intercooler Plumbing for Hot Side Kit ---
yikatoo.com/pr...
Intercooler - 600 x 300 x 76 ---
www.maxpeeding...
GT3582 Turbo ---
ebay.us/QbNNzU
HPX MAF Flange ---
eliteracefab.c...
Oil Drain Hose 5/8" 4 FT ---
www.pegasusaut...
A/N Line for CCV 4 ft ---
www.anhosefitt...
Oil Drain Adapter ---
ebay.us/gG6DQa
45 Degree AN 10 Threaded (CCV) ---
amzn.to/4eo5XR4
A/N Oil Restrictor ---
ebay.us/6VAQ1W
Studs for Turbo Mount (M10 X 1.5) ---
amzn.to/4eqxste
Extra T-Clamps ---
amzn.to/3ZnkhVt
45 Degree Barb Fitting 1/2" NPT (Turbo Drain) ---
amzn.to/3B1msE2
Turbo Coolant Plugs ---
amzn.to/3B1msE2
45 Degree AN 10 Barb Fitting (Oil Pan) ---
amzn.to/4ejS7ik
SS Nuts for Turbo mount (M10 x 1.5) ---
amzn.to/4ejS7ik
Studs for Intercooler Mount (M8 x 1.25) ---
amzn.to/3Zs0B30
SS Nuts for Intercooler Mount (M8 x 1.25) ---
amzn.to/4e2H90V
3/8" Steel Barb F connector ---
phenixindustri...
MISCELANEOUS ITEMS
Heat Wrap --- amzn.to/3ZsqMXm
Turbo blanket --- amzn.to/3ZrzZPx
Thread Chaser kit --- amzn.to/3ZrGulf
Crimping Tool --- amzn.to/4gqKmJq
Hi Temp Silicone Spray (For Mani) --- amzn.to/4eoW7OD
Orange Gloves Pack of 100 --- amzn.to/3XtKeA3
Spark Plug Gapping tool --- amzn.to/4emuyWk
Heatshrink Ring and Spade Kit --- amzn.to/3ZpAolq
Thread Sealant --- amzn.to/4gC6mRQ
--------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------
What's going on guys! Welcome back for another Episode of our Yoshimitsu Build Where we are taking my BMW E46 and Doubling the HP with a $100 eBay Turbo!
We got another long one boys so sit back and enjoy! A huge episode as were finally remounting the Turbo and Routing all the plumbing for the intercooler. All the fast Turbo bits finally get put on the car and we finally get to see what this engine is going to look like all dressed up. ALOT of custom work to be done in this episode boys. Not going to get this much information on a Turbo Build anywhere else on RUclips so please, consider Giving it a Like and Subscribe for your dog!
been waiting for this to drop, doing an e46 turbo build as well and its always nice to see what other people are doing
Hell yeah bro lets goo! 🔥🔥
Same. I literally did this exact thing last week with my friend. 😄
why dont you get the M tech 2 body kit (front bumper, sideskirts and a rear bumper) the front bumper would complement the cooler much better and you can keep the fog lights. 😃
Oh it’s on my mind brother. After were done with Season 1 of Project Yoshimitsu which is this Turbo Project, i have a few ideas for a Season 2 which will be entirely cosmetic interior and exterior related 😉😉
@@pythondoncant wait so happy you're building a 330 people used to be so against this makes me happy to see
I love that you doing this on your own , I have a skills development not for profit organization and we are planning on using this format to develop the youth in and around the areas struggling with socio economic issues and to develop thoer passions for cars and bikes into actual sellable and marketable skills.
Thats incredible bro!! You mean the E46 Platform? Im going to shoot a thorough video on it and how special it is for this exact reason after im done with this project! Thats a great idea man this Chassis is literally the perfect car for a beginner to get their feet wet. It has such a high ceiling that you can start off with oil changes and an air intake mod and make your way all the way up to this. Learning about cars and patience and the work it takes along the way 👍 Love that idea!
Hello, I am from Iraq. Excellent job. Good luck. Thank you
Thank you bro! 🙏🏼♥️♥️♥️
I am attempting to do the same with a Cxracing turbo kit. I've had this kit for 3 years. You've motivated me man. Best video and explanation I've seen. Thanks for sharing.
Hell yeah bro!! Glad I could get you going man. CX kit is cool cause it has the downpipe already if im not mistaken. Deff a cool kit to get you going and learning 👍👍
Subscribed! this dude is doing the same build I am going to be. I like his attitude as well. seems like a guy I'd hang out with.
Ayyy thanks bro! 🙏🏼🙏🏼 Anytime your in SWFL 👍👍
Nice work man ✊
💪🏼💪🏼
Thoroughly enjoyed this. Cant wait for the next episode. All the best bud.
Thank you bro 🙏🏼🙏🏼🙏🏼
Thanks bro i wish i have an e46 coupe and rewatch this video as a tutorial for pnp turbo. Waiting for the next test run, intake pressure bar or dyno test. Please make its work and always stay safe. Keep it up! 🔥🔥
Thank you bro!!! Dyno day in the near future 🙏🏼🙏🏼💪🏼💪🏼
This man is goated
My dogg 💪🏼💪🏼💪🏼
Lets goooo justgot mine washed today sit nextto it watching your video. So she knows whats about to go down 😂😂😂🔥🔥🔥💪🏾
Dope bro💪🏼 Im dying to clean this thing up! She’s in need of a good wash asap cant freaking wait
Nice video ! Keep going I want to see 100-200 difference with non turbo😅
I CANT wait to see the difference bro!! Hopefully gonna be quick 😉😉😉
@@pythondon has any email to send you about some information ?
Yeah check my profile its on the bottom of it
I think your maf flange is backwards too. The arrow should be the direction of air flow. Your maf might be backwards when installed.
Haha keep watching brother 🤦🏻♂️ you’ll see lol
yeah seeing you do the hot side automatically made me want to go top mount. great progress also I think you should the exposed painted parts you trimmed to prevent rust
Top mount all the way man! Soo much prettier. And thanks for the tip thats frosure a good idea forsure
Good stuff my man, every single one of your videos contains valuable lessons and knowledge. Thanks for going through shit for the sake of the community😄 BEST e46 channel right now❣
♥️♥️♥️ For the Dogs broo 🐕🐕🐕 Thank you for the flowers dogg I need these comments lol 😭🙏🏼🙏🏼
@@pythondon ❤❤❤
good job man waiting for next episode
Editing it as we speak brother 💪🏼
Lets goooo! Hella excited keep it up bro!
♥️♥️♥️♥️🫡🫡🫡🫡🙏🏼🙏🏼🙏🏼 Soon we go on a Drive!
Im going to call it the M55
Hahahaha yoooo thats actually perfect 🔥🔥😭😭
14:33 zeroooooo.
Haha only was able to keep a little bit lol
i think ima make my own ac lines when i do this but this is also a very interesting work around for it i love the way you routed things but im just afraid of melting that ac line when i have no mechanical sympathy for my rev limiter😭😭
Haha naa those pipes don’t get hot enough to damage the AC lines bro so bounce away 🔥🔥
I’ve been waiting for the video to drop! Loving the build! My garage went with the kangaroos team manifold, and I couldn’t keep the ac without custom ac lines.. and so they had the custom lines made, and the ac is not working yet again 😭 I wish I knew there is no need of ac lines being customized with the k64 manifold 😢
Ohh noooo brooo im sorry 😢! I did drain my AC just incase i needed to remove the lines. Lucky its all cleared 🙏🏼🙏🏼 Last thing to make sure I can clear is the wastegate so its not 100% yet bro but we’ll see god willing! K64 is Legit though man he is a beast. Hopefully they can sort your AC issue out
You could have just cut your barb down you installed for the icv so it goes in further. Take 10mm off it and it should give you the room to fit your charge pipe better.
I Thought about it bro but that would require me to take the manifold off to get access to the barb to remove and im not going back to that lol 😭 too much trauma associated wit that damn manifold in Ep. 4 lol
@pythondon yeh I understand bro. I've been in similar situations with my ls swap e46 makes you wanna burn the damn thing to the ground lol.
@@hassenbeattie1339haha LS swap 😭 I cant even imagine bro. Must be fun thoo
@pythondon it's the best bro such a good feeling with the LS and a turbo turns all the heads
Wild you got an LS Turbo’d?? Haha fucking sicccc
Welcome Matt to the painful of a professional technician 😅lol ....we keep asking WHY.. 😢
But I do love this channel personally and actually get frustrated waiting for new content
Haha love this man!! 🙏🏼🙏🏼 Tells me you guys are engaged 🤣💪🏼 This crap is hard as heck to do between shooting and editing AND the work. Im beat lol but loving it 🥲
@@pythondon once we up and running properly and have a production and build schedule it would be epic to collaborate, im planning on putting a compound turbo set up on my 2002 e39 525i , so we could definitely look at cross platforming maybe .
@yoshizimms7867 haha Sequential Turbo thats sick lol Im down forsure man. Let’s see where this channel goes, would love to have the freedom to continue working on projects like this. Reach out as you get closer 👍👍
I really think you should take off the cold side piping one more time bro. Have your welder friend cut and turn the spout coming off the pipe to get the perfect angle on the ICV. I was like yelling at my screen when you were going to go back to the welder friend but you didn't realize he can easily correct the angle for the ICV lol.
😭😭😭😭😭😭 I literally didn’t even think of that brooo wtfffff 😭😭 hahaha Woow. You’re right that would have been an easy fix and I had already been there TWO different times fml 😭
@@pythondon Yeah bro, you need to start doing LIVE videos so we can advise you in real time lol!
Lmao Twitch streaming the Turbo build 🤺🤺
Nice buying with the plumbing. Looks like with a little cutting and welding you should be able to tweak most everything into excellent alignment. The 3" piping doesn't quite fit without a little trimming but it's very close. 1/4 electric grinder is what is missing in your life.
Thank you! Yeah alot of custom fiddling and tweaking but we made it work 💪🏼 Great, whats the benefits of the Grinder vs. the Dremel I have? More power?
@@pythondon Torque and professional grinding tooling in all the shapes. I am still swapping between the dremel and my angle grinder as well but a die grinder lets you be so much more precise. Air tools are much better and its easy to smoke the Chinese die grinders but the Dewalt 1/4" seems to be robust enough for the home gamer. That's the one I will be picking up for my port and polish on the M52 head if I don't have a big enough compressor for an air grinder when the time comes. Air grinder is better but I'm still on a 3 gallon pancake compressor.
@robertfontaine3650 Ahh ok got it. Yeah im still nervous about using an actual rotary tool but sounds like this is a natural progression. Not sure i’ll ever need a rotary tool anyways as I like the more precise work of these anyways and may just outsource the heavier stuff for shops. Will definitely look into learning about those though forsure. Good luck on the port and polish on the head!! That right there would make me too anxious lol just the little debris i had on the valves in last episode i thought my engine was dead lol 🤣
Looks very good. Nice job and very well documented 👍🏼. The intercooler is however not catching much air with the bumper close up like this. I think you will have to cut it open a lot more to get the most efficiency out of it 🧐
Yeah let’s see how things work out. I wanted to cut up the bumper as little as possible to keep a more Natural look 👍👍
Hello, your project is very cool, sorry, could you guide me, the 3 outlets that the collector has on one side where the white and black circular valve goes or what is mine for? It only has those 3 tubes covered.
That Valve is for the Secondary Air Pump solenoid. If your tubes are covered maybe it was modified previously or your car doesn’t have a Secondary air pump? Im not sure i fully understand your question.
@@pythondon yes, thanks
im going to buy a 2003 325I as my first car (im 19), and im planning on putting a turbo on it as well. I've been being watching your Turbo build series. Do you or anyone who sees this have any tips?
Start off slow with the car bro. Learn how to service it, oil changes, get it running right. No check engine light, everything right. Slowly get your tools up, amazon is great for your first big tool chest. I got my red and black one there and it’s done me well. You’ll also need the space to do the work. Other than that bro dont be afraid, do a bunch of research and go for it. This is the best platform for learning about cars bro, dont look back. Everything thats been done and been a problem has been documented and resolved. There is nothing we dont know about these and the information is out there so you are in good hands! Best of luck!
Well done mate, huge progress 🙌 Can you retain AC with this turbo setup?
Yes! 👍
Is there a parts list or links anywhere to all the parts you have used? Thanks in advance
Yes Bro im going to hopefully Release the entire parts list by Next Friday! 👍 Stay tuned!
Hai bro i cannot wait for the 1st start
Mee to bro! Excited and Nervous at the same time 😭🙏🏼
I thought journal bearing didn’t need reducer, but ball bearing did… could be wrong though.
From what ive read and others have experienced they still recommend a reducer! 👍
@@pythondonfair play. Loving the build!
Thank you bro!! 🙏🏼
@@pythondon I'm pretty sure people running bottom mount use a reducer for journal bearing because of bad drain pipes. Don't think top mount needs it. Just be careful not to starve the turbo of oil.
@roki4155 will keep this in mind bro! I have a spare cheapy incase this one goes kaput!
My builds coming this year m54b25 triying to get 420hp on e85
400 gonna be soooo nice bro ♥️♥️ cant wait to get there 🙏🏼🙏🏼
Link to turbo?
Ebay search “GT3582 Turbo” and look for the one that looks identical 👍
@@pythondon yes I was looking last night, none for $100 tho. Just a bit more like on the $170 $200ish side I’ve seen them
It’s $118 now. Just found it. teal background and says USA Shipping at the bottom of the picture
Blow off valve where is it?
No BOV brother I want those Stutuututututu nosies 🙂↔️ lol
@@pythondonEXACTLY! BOVs are over rated, with a turbo you want chu chu chu train.
CANT WAIT!
@@UnapologeticIslamand it’ll probably end up having a boostleak because of the bov (unless you go with a expensive one that costs more than the turbo itself 😃)
@@pythondon What engine do you have?
You talk way too much
lol It's an Hour and 43 min log bro what were you expecting??
You talk too much bro
Brother the video is an hour and 43 minutes what’d you expect? Lol
@AhmadAliKohi You complain too much bro, this ain't ASMR 😂
@jovaniavila3345 Nanii 🤣🤣♥️♥️♥️
This is highly detailed! 🫡😬
How many kms does engine have?
Thank you bro! 🐕🐕 185km 🫡🫡