I have watched multiple videos on how to use these jigs and yours is by far the best 👌. All of your methods shown lead to the most accurate joints with the least amount measuring, almost foolproof. Thanks for making it
Excellent video, no need for a commentary! Now I know what those moulded-in pegs are for - centering! Everyone with one of these style jigs should watch this video. Thankyou.
I have this video saved...I was doing some dowel work today and went straight to this video for reference...absolutely priceless. Thanks again for taking the time to make this video - I'll have this saved for life :)
I have one of these jigs - with horrible instructions that don't go much further than moving the L shaped measuring bar. I didn't know you could do all of this with it. This has just saved me a lot of sweat and guesswork for a Sunday project!! Thank you!
Thank you so much for taking the time to share This , I bought the kit a few years ago , but just did not know how to use the Jig Properly , You made this look super easy , have to get the Jig Out again and Try again
Bravo, bolji video i obrajšnjenje za korišćenje ovog alata do sada nisam video na ni jednom kanalu, svaka čast, nastavite i dalje ovako i redovno ću vas gledati i pratiti. Pozdrav!!!
Thx for sharing. I’ve been having the hardest time ever trying to figure out how to work this jig. You’ve made it so much easier for me to comprehend the concept. I’m definitely subscribing to your channel. You are definitely a miracle worker. Thx again. You are the best.
Thanks so simple and sorted out the problems I was having. I slightly sanded a dowel and coloured it red to use as the reference dowel as all mine were a very tight fit.
nice tutorial! but for connection 2 there is another faster way a slots in the vertical stop is made for this purpose starting from 4:25, you need to turn the tool with the handle up, and the vertical stop away from you. so that the dowel gets into the corresponding slot
Muchas gracias por tú video, es de gran ayuda tengo ese aparatito pero lo estaba usando mal. Ahora voy a practicar y ver si puede hacer un ensamble decente 😅
I have a question. I recently bought 10mm wood dowels but I dont undsrstand which wood brill bit to use to make a hole. I have 8mm and 10mm wood drill bit. 8mm hole for too small for 10mm dowel and 10mm hole was somewhat looks a bit loose for 10mm dowel.
Hi, I purchased one of these jigs when I saw your video, It came with three small pieces with points on one surface and the other end seems to fit inside the drill bit holes (3 different sizes) Could you please explain what these are for? They have me stumped, I thought maybe they were for scribing a line in the timber to show where the dowels could be fitted, but if that's the case, they'd always fall out and there's no way to anchor them in place. There's nothing worse than having parts for a Chinese gadget and there's no instructions :-) Thanks for your video.
![Dowel Jig Basics [video 441]](http://i.ytimg.com/vi/zTj_hiEVfvw/mqdefault.jpg)
No talking, just perfect. Thx for sharing.
Thank you! A very clear and instructive tutorial on how to use all the features of a doweling jig. Priceless!
One of the best tutorials in this topic ! ⭐⭐⭐⭐⭐
Best one I have seen!
I have watched multiple videos on how to use these jigs and yours is by far the best 👌. All of your methods shown lead to the most accurate joints with the least amount measuring, almost foolproof. Thanks for making it
Great video shows exactly how to do dowels properly!
Excellent video, no need for a commentary! Now I know what those moulded-in pegs are for - centering! Everyone with one of these style jigs should watch this video. Thankyou.
no nonsense, expert video....exactly what I needed. Thank you very much!
KUDOS TO MARDAK WORKSHOP. A very instructive video content.!!!
I have this video saved...I was doing some dowel work today and went straight to this video for reference...absolutely priceless. Thanks again for taking the time to make this video - I'll have this saved for life :)
A picture worth a thousand words times a video. Thank you!
I have one of these jigs - with horrible instructions that don't go much further than moving the L shaped measuring bar. I didn't know you could do all of this with it. This has just saved me a lot of sweat and guesswork for a Sunday project!! Thank you!
And yes it works so well. One cabinet finished and one more to drill out tonight !
Thank you my friend.. has taught me a slightly better way.. to use the Dowel jig here in the UK. Thank you 🙏
Love this video , the best explanation and not a word said !! Amazing.
I made perfect joints following this .
Thank you so much for taking the time to share This , I bought the kit a few years ago , but just did not know how to use the Jig Properly , You made this look super easy , have to get the Jig Out again and Try again
Молодец, все ясно и без слов... Профессионализм и мастерство -- общий мировой язык.....
Amazing, wonderful and very useful! Thanks!
Bravo, bolji video i obrajšnjenje za korišćenje ovog alata do sada nisam video na ni jednom kanalu, svaka čast, nastavite i dalje ovako i redovno ću vas gledati i pratiti. Pozdrav!!!
Howdy, Brother! Exactly what i was looking for. Thank you and Drive-On, Cowboy!! 🤠
Great video! Thank you for this explanation!!
I agree, the best video I have found on the subject of a dowel jig, thank you sir!
Best video ever for this jig, thank you so much
@@michaelsaber8143 you're welcome thanks for watching
Well done, Master, very good video, many thanks!
Спасибо! Всё понятно стало! Наконец я понял, как работает данное приспособление!
your video explains this really well. thanks
Excelente video, saludos desde Perú.
thanks! great demonstration of how to use this jig.
I've had this jig for 10 years, and the instructions never made much sense. Thanks for this video !
Thank you. That was an excellent demonstration of how to use a dowelling jig. I did not know all those techniques for aligning the holes.
someone give this guy some cash so he won't have to remove his single dowel every single time
he earned it, good tutorial
guarde este video como un invaluable auxiliar de mi taller, gracias mil por compartirlo,saludos. desde atotonilco estado de hidalgo,en Mexico.
Pictures are worth a thousand words my friend, thanks for showing how it's done...subbed
so thats how the pegs are lined up, so easy once shown, thanks heaps.
Excelente herramienta 🔨✂️
Fantastic straight forward skills 👌
Great video and I really enjoyed the fact there’s no speech and a simple music loop, helps me zone out and focus...
Thx for sharing. I’ve been having the hardest time ever trying to figure out how to work this jig. You’ve made it so much easier for me to comprehend the concept. I’m definitely subscribing to your channel. You are definitely a miracle worker. Thx again. You are the best.
Very helpful video thanks! from Philippines.
Very Good !! Congratulation 🇧🇷
Thanks for Sharing the information on this jig!! I just received mine and your video was very helpful.
Excellent teaching video. Pacing is perfect. Just the right amount of detail. I thank you.
Thanks so simple and sorted out the problems I was having. I slightly sanded a dowel and coloured it red to use as the reference dowel as all mine were a very tight fit.
Skvělý nápad 👍 Nerozumím proč, když dělá jinak vyborný tutoriál, je pokaždé tak obtížně vytahuje🤔🤔🤔
Thanks for sharing your knowledge 🛠👍
nice tutorial! but for connection 2 there is another faster way
a slots in the vertical stop is made for this purpose
starting from 4:25, you need to turn the tool with the handle up, and the vertical stop away from you. so that the dowel gets into the corresponding slot
there are a lot of ideas and method to do that. Thanks for your comment.
im watching it late..should have seen this yesterday.. but nvm... i learned a thing now and going to keep it inside for next project
I got a cam lock jig and didn’t wanna mess up but you made it easy and simple.
ممتاز يبو نور خوش فيديو
توني اجرب هالجهاز
حبيبي ابوجاسم ❤️❤️👍🏻👍🏻👍🏻
Спасибо. Очень доступно и без лишних слов
Excellent video. Thanks very much. Makes things MUCH clearer!
Thank you for sharing your skills and tips
you’re welcome thanks for watching ❤️❤️
obrigado pela demonstração.
sou do Brasil
Hello my friend,
This is a very good idea. And the need for the workshop. Congratulations. You created the dowel tool well. 'll see.
thanks you very much my friend ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️🙏🙏🙏
great video .. especially when these chinese jigs come in a packet with no instructions...thank you...
Master Excellent .....
Brilliant video. Expertly explained. If only more RUclips how to video were this straightforward. Thank you
What drugs are you on? There was no 'explanation'. At all. Thumbs down on this video too.
Perfect when there is no instructions in the box.
Thank you so much for this video!
Good instructional video. Thanks.
Great video ,if I'm honest I tried my jig before watching and it fine my head in 😂I found it hard ... how about u guys
exelente muy bien explicado gracias
can you let me know who made the dowel jig you are using.
thanks, Ray
BHD 1.02 52％ Off | Quick Wood Doweling Jig ABS Plastic Handheld Pocket Hole Jig System 6/8/10mm Drill Bit Hole Puncher for Carpentry Dowel Joints
a.aliexpress.com/_mPGU63s
Мужик сверлит, а я сижу перед экраном и дую (сдуваю опилки)😂
Muchas gracias por tú video, es de gran ayuda tengo ese aparatito pero lo estaba usando mal. Ahora voy a practicar y ver si puede hacer un ensamble decente 😅
Igualmente me pasó a mí
Super! Perfect!!
nice video! just bought one last month!
Yes they are very handy if you know how to use them Thanks for your comment
Really good ... thanks
I wish I can do it like you you are the best thank you
thanks bro ❤️❤️❤️❤️
Parabéns pela dica de uso, perfeito a melhor que já assisti.
Thank you. You understand people,s brain did many positions.👍
Nice video!!!
Greetings from Brasil
thanks bro ❤️❤️❤️❤️
Thank you so much, now I know how to use it.
I have a question. I recently bought 10mm wood dowels but I dont undsrstand which wood brill bit to use to make a hole. I have 8mm and 10mm wood drill bit. 8mm hole for too small for 10mm dowel and 10mm hole was somewhat looks a bit loose for 10mm dowel.
Tak potom něco není 10mm - buď vrták nebo kolíky. Jiná možnost není. 10mm je vždy 10mm ! 👍🤠
Many thanks…I lost my manual…Ty
I have the same tool rwn and I do the same things. But it is crooked. What should I pay attention to, it could be the reason.
Найкраще відео по роботі з цим кондуктором.
good job bro...nice job you have...
Very good
What's the price for a general pro- doweling kit
Nuito bom vídeo, simples e objetivo. me ajudou muito. Deus abençõe você
Лучшая демонстрация, как пользоваться приспособлением, спасибо
What brand is the jig?
That you for this
Many thanks
ممتاز مجيد شكراً جزيلاً على هالفيديو .
حبيبي ❤️❤️❤️👍🏻
Nice tutorial. Thanks so much.
What brand of jig is that? Do you have a link?
It’s China I order it from a Aliexpress
Thank you so much
Thank you
Hi, I purchased one of these jigs when I saw your video, It came with three small pieces with points on one surface and the other end seems to fit inside the drill bit holes (3 different sizes) Could you please explain what these are for? They have me stumped, I thought maybe they were for scribing a line in the timber to show where the dowels could be fitted, but if that's the case, they'd always fall out and there's no way to anchor them in place. There's nothing worse than having parts for a Chinese gadget and there's no instructions :-) Thanks for your video.
Hi thanks for your comment can you contact me on Instagram and send me some photos of your jig @alnajar22269
👌Excelente 👌
ابداع ويعطيك العافية
Thank you!
Thanks ❤❤❤❤
Thanks you
Mardak, it's OK to talk, you know.
Great instruction but REALLY annoying music
I will work on that next video
This video would be so much better if you'd tell the viewer what you are doing and why step by step
I have plan to talk in my future videos Thanks for your comments
Merci beaucoup.
Thank you.
Muchas gracias
8:37 On the sides-edges did not converge did not grow together correctly!