That SCUF controller is not overclockable. That is why after tou set it to 1000, the polling rate in the test didn't change. It was still 566. The PS5 controller is overclockable. That is why it did change. The Xbox controller isn't overclockable either.
@@mickeyn.5059 Scuf Reflex' Are overclockable. the instinct and envision are not. The software allowing you (or showing as overclocked) does not mean the chip on the controller is overclocked In theory yes you can use the software to overclock the envision and the instinct but in practise it doesnt do anything
@@BeHempy and why exactly would i be capping my controller literally came out with stick drift, the paddles are hard to press im not lying brother lmao
Iv switched to my edge controller. Just wish it was 4 rear buttons but I can get by with it and adjust. Response time is quicker than the 2 trash hypr custom controller I have. Able to switch out the thumb sticks is a total W
People saying cap clearly haven't purchased this controller themselves. I have a troll all over my comment sticks won't center and the triggers constantly register even when sitting on a table lol. Having to immediately set the deadzone at 3 or above on a brand new controller is not cool. I'm very disappointed in this one
@@L0ELIIFE I don't think it will I just made a test with my DS4 wireless and it gives me ~ 4ms with default 244hz And 2.1ms with 472hz when the BT pool rate set to 500 And 1.3ms with 770hz when the BT pool rate set to 1000 So I assume each of these controller will work with a different pooling rate when its connected to BT.
@@mhnoni it’s been tested and the results are the same. There are a few different folks who’ve tested this on YT. One of the people who come to mind is GamerHeaven but others have done so as well. Maybe vCuda. But yeah the results are out there.
wait i really hope you see this and respond you said if i overclock my controller to 8000 instead of a 1000 i can get FPS drops and stuff is that really true
I used to be an avid Scuff controller player, that is, until I got my Victrix controller (XBox/ PC), over a year ago. I love that controller. Not sure how to overclock controllers or if you can even overclock the Victrix but it plays as if it is. Superfast! Along with the hairline trigger stops, playing COD changed forever for me. I'm curious how this new Scuff Envision will play, wired.
I have the envision, both wireless and wired feel the same. It has been the best controller to me. And I have had the victrix, wolverine, elite series 2, BattleBeaver (Which I like), Scuf Instinc and Reflex (Which were shit). The envision to me is the most comfortable. That is my opinion though.
.75 ms !???? Howww bruh the lowest I ever see was .9 I got mines plugged into the best usb 3 port connected to mobo an I got it overclocked same way n same program
Interesting mine only reports 2. -3. I tried different ports and multiple different times at first i thought it was me but after watching others test seems as though you are the only one getting that speed would you be willing to test that controller on another pc I’m wondering if you just got a better controller or if it’s your pic it self because I can still return mine if I have gotten a dud
I noticed that the black wired Scuf Envision (non pro) is the only version that states it has a "Low latency wired connection". The Pro states it has "ultra-fast wireless connectivity" but doesn't mention anything about it's wired capabilities. I wonder if the wired version will be overclockable.
looks like the polling rate is only capped to 563hz over 1k? hmm whats the reflex pro and instinct pro have usually for input delay? or even the elite v2 ?
Ive noticed that overclocking the Scuf Envision Pro doesn’t do anything. Ive done test’s with the USB & wireless. Funny enough, im getting a better polling rate & consistent ms ranging from 0.9-3.0
Disclaimer this doesn't really have to do with your video but it does controllers. Hey I have used many controllers in the past so far since the new updates to the ps5 controllers where you can boost the overclock to 8000 I only really want to play with ps5 controllers. I heard you talk about the ps5 edge I have used a Battle bever and a ps5 amazon paddle installation but have not tried the ps5 scuf or the ps5 edge So I was wondering if you have tried either and how you feel about them I was looking at getting one of those 2 or this one but now that I know its capped at 1000 and has issues I will be looking at the ps5 edge or scuf.
I dont know if tis just me but when I use this controller when plugged in it feels faster than when wireless, despite how it is supposedly ultra fast wireless.
It changes the whole feel of the controller G trust me if you go from a envision pro to an edge OC'ed to 8000hz you will feel like your sensitivity just 1.5xed (i know this for a fact cause i made the switch XD) the overall gameplay just became better in my case
the powerA xbxox controllers have 4ms delay out the box cuz higher pollingrate than standard xbox controllers. u can go to 1k but no real benefit.@@Louwhie
I just made a test with my DS4 wireless and it gives me ~ 4ms with default 244hz And 2.1ms with 472hz when the BT pool rate set to 500 And 1.3ms with 770hz when the BT pool rate set to 1000 I doubt you will see a difference < 5ms. so all looks good IMO.
@@JaYgRiFfSTuBe yeah that had me hella confused but i think it’s cause he was spinning the stick before he opened the test. Cause when i open the test then spin the stick the first number that pops up is like 1000ms which brings the average way up
can this controller be used without ICUE??? it seems that it ONLY works if ICUE is installed but id rather not use ICUE if i can help it and just use it like any other controller for the PC
Does the controller keep the overclocking after it’s plugged into a different device? Like if i plugged it into the ps5 after overclocking it on my pc.
I did like that controller but after awhile I noticed my hands started to bother me. Then I noticed that the controller is smaller than even a xbox controller towards the part where you place your hands. I had to return it.
Good video ! I swear I look for the latency controller software that you have what is the name of this ? Or can I find it and where ? Please answer me !
Guys how do i do this overclock on my PS5 edge controller? I tried before on a custom ps5 controller from hypr(dont buy from them btw, they are trash and ignore your issues) and it bugged my controller, specifically cutting off the left thumbstick functions and not OC at all.
After jumping into the Scuff hype wagon, I bought me a Scuff Instinct Pro, and I'm just three months m, I started getting stick drift on the right Joystick. Never again I'll buy a Scuff controller in my life. Now I bought a FlyDigi Vader 3 Pro, best controller ever, which replaced my Victrix Gambit, and ThrustMaster eSwap Pro
You know that the drift comes from dust on the joystick sensors and you can fix it in 5 min by popping the joystick off since you can do that on Scuf controllers and opening the green thing and cleaning it with a q-tip. There are plenty of tutorials on RUclips.
the paddles are working as designed after OC ? In my case i broke my instinct pro after this action some time ago i feel that the controller has only one memory slot custom for profiles . and not posssible to remap one paddle even iif it bright white when you try tormap it. take care of your controller !
Might just be the chip that they use tbh. It seems hard ware locked. If they made it with 1k polling rate it’d be an instant cop for me. Looking at these numbers and know that ps5 controllers Can overclock to 8000hz which means .125ms response time, it’s a no brainer that the scuf reflex pro is most likely the best option for a pro custom controller with the lowest delay
Hey do you know how i can fix the stick drift i tried raising the deadzone on the app but it made it feel like i was on 20 deadzone and i couldnt make any minute adjustments to my aim
I personally leave all the deadzones on that app at 0 and then just change it on cod. It seemed much more snappier and helped my aim but just switching in in cod
@@Louwhie do you think the last firmware update they pushed dropped the speed ? I’m currently try to roll mine back but can’t find the old firmware you are the only one getting these amazing numbers
Im really not impressed with the envision at all. I really wanted it to be great. The triggers and sticks are way to sensitive. You cannot overclock it without issues like losing aim assist and you cannot put stick extensions on without it hitting the case limiting your movements. They definitely need to make some improvements
@TheSpenceBoogie definitely not lies I'll be on stream tonight and will show you exactly what I'm talking about with the exception of overclocking it again because it's pointless. I will however show I'm running it not overclocked. You literally have to set the trigger deadzone high enough or they constantly go off by themselves.
@TheSpenceBoogie You can say cap all you want, but you can't argue with live video evidence 😂. Hopefully the newer versions will work a little better. I love the controller they just have to make a few adjustments.
@@DaLions_Den It does not on a mid to high end gaming machine. Been tested by many creators. But it’s all good. Just like how there are 8k mice and keyboards. I use both daily no issues. Matter of specs. 👍
How does it feel in hand compared to the ds5? I have a dual sense edge im and I dislike it, it feels so huge in hand it’s uncomfortable imo. but I do notice the difference compared to the Xbox controller I have. I haven’t even OC’d it and it feels much more responsive. I’m hoping the wireless mode is similar polling rate and response time. I wouldn’t see why not all my mice g pro super light all have high polling rate that feels no different from a wired mouse.
It is weird to me that no one has noticed, but this is just a Scuf Vantage 2; instead of PS4 and a volume slider. It is PC and has G buttons where the volume slider was. This controller has a lot of the same (non-software) features that the Vantage 2 had. Oddly enough, people hated the Vantage 2; but love this controller? Although yeah has mechanical buttons, etc. but it really is a re-skinned and updated Vantage 2. They should have just launched as "Scuf Vantage 3"; but I can see why they didn't do that. As that controller wouldn't sell.
1 ms isnt gonna be noticable at all. For anyone that is unaware, there is 1k milliseconds in a second, and if you think you're gonna notice a 1/1000 delay, then let me know what you're smoking.
I bought a scuff instinct pro about 2 months ago and soon as I received it, it had stick drift. Although they were pretty fast about the RMA I feel like I shouldn’t have to spend )$250 on a controller just to wait for it to show up for two weeks before o then be disappointed and have to return my BRAND NEW controller to get repaired. So from the time of purchase to the time I actually got to use the controller was about a month. Since getting my controller back within two weeks the B button is already getting stuck…… I hardly even use the buttons because I use the paddles. I see they at least dropped the price for this one a bit but as I can see still hitting you with the ole left stick drift right out the gate. That’s gonna be a easy pass for me😂😂😂have a good day man.
@@shipwreck19 I’ve been liking my controller but that stick drift is getting to me. I feel like this big of a company should always run tests on these controllers before they ship them out.
That SCUF controller is not overclockable. That is why after tou set it to 1000, the polling rate in the test didn't change. It was still 566. The PS5 controller is overclockable. That is why it did change. The Xbox controller isn't overclockable either.
I've seen 4 people overclock the scuff, are you sure?
Since when have scuffs not been overclockable ?
Thought everybody been overclocking ?
@@mickeyn.5059 Scuf Reflex' Are overclockable. the instinct and envision are not. The software allowing you (or showing as overclocked) does not mean the chip on the controller is overclocked
In theory yes you can use the software to overclock the envision and the instinct but in practise it doesnt do anything
@@mickeyn.5059 only the controllers Scuff makes based off the PS5 controller.
my right stick has drift and the outter paddles are hard as fuck to use, the edge is so much better than this disappointing controller
Cap
@@BeHempy and why exactly would i be capping my controller literally came out with stick drift, the paddles are hard to press im not lying brother lmao
Will this work on ps5 with a brook converter, wingman fgc maybe?
Iv switched to my edge controller. Just wish it was 4 rear buttons but I can get by with it and adjust. Response time is quicker than the 2 trash hypr custom controller I have. Able to switch out the thumb sticks is a total W
People saying cap clearly haven't purchased this controller themselves. I have a troll all over my comment sticks won't center and the triggers constantly register even when sitting on a table lol. Having to immediately set the deadzone at 3 or above on a brand new controller is not cool. I'm very disappointed in this one
Would like to see wireless test. There will probably be a difference. It's using the corsair wireless tech.
The results are exactly the same.
@@L0ELIIFE I don't think it will
I just made a test with my DS4 wireless and it gives me ~ 4ms with default 244hz
And 2.1ms with 472hz when the BT pool rate set to 500
And 1.3ms with 770hz when the BT pool rate set to 1000
So I assume each of these controller will work with a different pooling rate when its connected to BT.
@@mhnoni it’s been tested and the results are the same. There are a few different folks who’ve tested this on YT. One of the people who come to mind is GamerHeaven but others have done so as well. Maybe vCuda. But yeah the results are out there.
Do you have a video on the application/software to be installed for overclocking?
Can you feel the 7ms Input delay from the Xbox Controller in competitive gaming?
Did you run numbers on the scuf envision when on Bluetooth? Just curious what the response time is wireless
DualSense reflex pro is the ultimate controller, the world's best millisecond controller
Great controller for sure
That’s what I got and love it
You should always use 1000 when testing the sample
its number of samples, the more the average will be more accurate. but yeah, 1000 is more than enough
I switched back to PS5 i csnt deal with this bullshit just to play cod
yeah but how does the controller feel
wait i really hope you see this and respond you said if i overclock my controller to 8000 instead of a 1000 i can get FPS drops and stuff is that really true
Yep
I used to be an avid Scuff controller player, that is, until I got my Victrix controller (XBox/ PC), over a year ago. I love that controller. Not sure how to overclock controllers or if you can even overclock the Victrix but it plays as if it is. Superfast! Along with the hairline trigger stops, playing COD changed forever for me. I'm curious how this new Scuff Envision will play, wired.
I have the envision, both wireless and wired feel the same. It has been the best controller to me. And I have had the victrix, wolverine, elite series 2, BattleBeaver (Which I like), Scuf Instinc and Reflex (Which were shit). The envision to me is the most comfortable. That is my opinion though.
I returned my Victrix pro BFF because it’s polling rate locked at 250hz pretty much a Xbox controller
Cool controller but Xbox layout is a dealbreaker for me. I play double claw and that doesn’t work on Xbox layout at all
Gamer heaven made a video about this controller, he could’t overclock it either
.75 ms !???? Howww bruh the lowest I ever see was .9
I got mines plugged into the best usb 3 port connected to mobo an I got it overclocked same way n same program
I get 0.9 too
yeah idk@@Fizz439
Interesting mine only reports 2. -3. I tried different ports and multiple different times at first i thought it was me but after watching others test seems as though you are the only one getting that speed would you be willing to test that controller on another pc I’m wondering if you just got a better controller or if it’s your pic it self because I can still return mine if I have gotten a dud
Bump
Bump 2
@@Max.-_ good luck lol
Can you compare with the elite 2 controller over wireless ms receiver and the scuf? Input delay that is.
if you use an elite 2 controller your at a disadvantage
Yo, do a test comparing the envision wired, bluetooth and dongle connected
What USB C CORD U USING ?
I noticed that the black wired Scuf Envision (non pro) is the only version that states it has a "Low latency wired connection". The Pro states it has "ultra-fast wireless connectivity" but doesn't mention anything about it's wired capabilities. I wonder if the wired version will be overclockable.
looks like the polling rate is only capped to 563hz over 1k? hmm whats the reflex pro and instinct pro have usually for input delay? or even the elite v2 ?
does anyone know why my envison pro's polling rate changed to around 400hz after I tried overclocking it
Ive noticed that overclocking the Scuf Envision Pro doesn’t do anything. Ive done test’s with the USB & wireless. Funny enough, im getting a better polling rate & consistent ms ranging from 0.9-3.0
I couldn’t be more pissed. Why tf make a pc controller that’s not the fastest!
Anyone know the speed when it’s connected wirelessly with the dongle? I wanna use it wirelessly but if it’s faster wired I’ll just use that.
you doing everything right some fanboys just like living in denial my bro. anyone and their G mama knows DS5 is superior
Does the Scuf Envision works with the Ds4 ?
where is the program to download the overclock ???
Hey next time could you think about putting the results for each controller in the description as well 🤙🏽
Great video, thanks for sharing this information, can you retest on wireless connection?
Hey I have a question do the scuf controller work in ds4 windows ?
U always stay hovering over the thing ur overclocking u dont need to click the item . Maybe watch shottzy overclock tutorial
Disclaimer this doesn't really have to do with your video but it does controllers. Hey I have used many controllers in the past so far since the new updates to the ps5 controllers where you can boost the overclock to 8000 I only really want to play with ps5 controllers. I heard you talk about the ps5 edge I have used a Battle bever and a ps5 amazon paddle installation but have not tried the ps5 scuf or the ps5 edge So I was wondering if you have tried either and how you feel about them I was looking at getting one of those 2 or this one but now that I know its capped at 1000 and has issues I will be looking at the ps5 edge or scuf.
Did you said you have stick drift on the Envision already????
I dont know if tis just me but when I use this controller when plugged in it feels faster than when wireless, despite how it is supposedly ultra fast wireless.
Could you do a size comparison test with the Reflex? Is it bigger?
It's bigger, and for anyone with small hands the paddels on the back are useless
Damn so i been sleeping on ps5 controller on pc 😢
imagine being a gamer and thinking 1ms difference is going to make you better. not directed toward Lou. good video man!
for me it did
@@alan.74 confidence, maybe. You couldn't measure 100ms let alone 1ms.
i def feel the delay of 100ms@@jeffibuilt
It changes the whole feel of the controller G trust me if you go from a envision pro to an edge OC'ed to 8000hz you will feel like your sensitivity just 1.5xed (i know this for a fact cause i made the switch XD) the overall gameplay just became better in my case
You remind me of the people who said you couldn’t notice the difference from 60hz -> 144hz -> 240hz but then people proved you could notice that.
Yeah I see the math but in game the envision feels more responsive idk why
You are moving the stick so slow
you can even go up to 8000hz on that ps5
can you put link for the test software
Do you know what the latency of a ps4 controller is?
PS4 controllers overlocked are 1ms if not a little lower
the powerA xbxox controllers have 4ms delay out the box cuz higher pollingrate than standard xbox controllers. u can go to 1k but no real benefit.@@Louwhie
It's .5 for ps4 controller and .00 for ps5. At least that's what I see on ds4windows.
I just made a test with my DS4 wireless and it gives me ~ 4ms with default 244hz
And 2.1ms with 472hz when the BT pool rate set to 500
And 1.3ms with 770hz when the BT pool rate set to 1000
I doubt you will see a difference < 5ms. so all looks good IMO.
What program did you use to test the input lag
my scuf envision is pulling bad numbers idk why
Same here read my post just below yours
@@JaYgRiFfSTuBe yeah when i overclock my ps5 scuf its .9 and the envision won’t go under 2
@@djrlive well this guy has 1.7 so I’m wondering what he got going on they should all have the same board
@@JaYgRiFfSTuBe yeah that had me hella confused but i think it’s cause he was spinning the stick before he opened the test. Cause when i open the test then spin the stick the first number that pops up is like 1000ms which brings the average way up
@@djrlive hmm I’ll try that but I don’t thin it will change
can this controller be used without ICUE??? it seems that it ONLY works if ICUE is installed but id rather not use ICUE if i can help it and just use it like any other controller for the PC
Does the controller keep the overclocking after it’s plugged into a different device? Like if i plugged it into the ps5 after overclocking it on my pc.
No it doesn't need oc on console it's already native to the ps it's not actually the controller getting oc it's the USB port it's plugged into
how can i get this latency test cuz i wanna check my dualsense edge
i just bought the Gamesir t4k controller 1.7MS AND 911HZ it has 2 rear buttons, its cheap but the performance u get out of it is insane.
I did like that controller but after awhile I noticed my hands started to bother me. Then I noticed that the controller is smaller than even a xbox controller towards the part where you place your hands. I had to return it.
gamesir? YESSIR.
Where can I download the software used to test input delay in this video?
Appreciate this video man!
Glad it was helpful!
I have a SCUFF REFLEX PRO i can overclock to 8000 polling rate why do you only have 1000?
How do u do 8000 polling rate the drop down option only goes up to 1000??
when i try to overclock my pads (both envision pro and edge) they appear like red, probably an error? do you know why?
You have to turn off secure boot in your bios
scuf ps5 FPS vs PS5 normal!!! GG
@louwhie how are you getting 0.7? I can only get 0.9
What motherboard do you use?
Good video !
I swear I look for the latency controller software that you have what is the name of this ? Or can I find it and where ?
Please answer me !
What's the verdict?
Bro u have to use 1000 samples . These tests arent correct.
lol no the more samples you use, the more correct they are
But the extra back triggers its like they are cohoots, you must choose speed for better controls
Guys how do i do this overclock on my PS5 edge controller? I tried before on a custom ps5 controller from hypr(dont buy from them btw, they are trash and ignore your issues) and it bugged my controller, specifically cutting off the left thumbstick functions and not OC at all.
you need to install a software
After jumping into the Scuff hype wagon, I bought me a Scuff Instinct Pro, and I'm just three months m, I started getting stick drift on the right Joystick. Never again I'll buy a Scuff controller in my life. Now I bought a FlyDigi Vader 3 Pro, best controller ever, which replaced my Victrix Gambit, and ThrustMaster eSwap Pro
You know that the drift comes from dust on the joystick sensors and you can fix it in 5 min by popping the joystick off since you can do that on Scuf controllers and opening the green thing and cleaning it with a q-tip. There are plenty of tutorials on RUclips.
For some reason the envision feels faster than my ps4 🤷
It is still faster it's naturally faster so even with an overclock it's going to be more consistent instead of a digital overclock
the paddles are working as designed after OC ?
In my case i broke my instinct pro after this action some time ago i feel that the controller has only one memory slot custom for profiles .
and not posssible to remap one paddle even iif it bright white when you try tormap it.
take care of your controller !
How about the instinct pro controller? How much imput lag does it have? Haven't seen a video about it.
alot
So it’s naturally faster than ps5 but slower when overclocked?
Why would it be slower when overclocked that makes no sense
I bet Future drivers can change this
Might just be the chip that they use tbh. It seems hard ware locked. If they made it with 1k polling rate it’d be an instant cop for me. Looking at these numbers and know that ps5 controllers Can overclock to 8000hz which means .125ms response time, it’s a no brainer that the scuf reflex pro is most likely the best option for a pro custom controller with the lowest delay
Scuf Envision work on DS4 Windows?
Noo
link imputTes?????
just look up polling rate test controller on google and it is the first link on github
I just bought Envision pro and i can only get mine OC to 491 hz. any idea how you were able to get a higher OC. I have it set to 1000
Mine is 300hz
How do you test this?
Same bro wtf
What the best 240 monitors for comp 2023 ?
Lg oled stupid 27 inch
Or the Asus variant 240hz oled
Hey do you know how i can fix the stick drift i tried raising the deadzone on the app but it made it feel like i was on 20 deadzone and i couldnt make any minute adjustments to my aim
I personally leave all the deadzones on that app at 0 and then just change it on cod. It seemed much more snappier and helped my aim but just switching in in cod
I'm having similar problems this controller definitely has quality control issues.
You can’t see the input delay while using it wirelessly?
Yes you can I didn’t test it that way but it would be the same test just with the usb receiver.
So what’s the ms results for input delay when testing wirelessly?
@@Louwhie do you think the last firmware update they pushed dropped the speed ? I’m currently try to roll mine back but can’t find the old firmware you are the only one getting these amazing numbers
Im really not impressed with the envision at all. I really wanted it to be great. The triggers and sticks are way to sensitive. You cannot overclock it without issues like losing aim assist and you cannot put stick extensions on without it hitting the case limiting your movements. They definitely need to make some improvements
Lies lol
@TheSpenceBoogie definitely not lies I'll be on stream tonight and will show you exactly what I'm talking about with the exception of overclocking it again because it's pointless. I will however show I'm running it not overclocked. You literally have to set the trigger deadzone high enough or they constantly go off by themselves.
🧢
@TheSpenceBoogie You can say cap all you want, but you can't argue with live video evidence 😂. Hopefully the newer versions will work a little better. I love the controller they just have to make a few adjustments.
bruh saying the trigger and sticks are way to sensitive when you can literally adjust both of them is crazy lol
Can you use on ps5?
No you can’t boss only pc
@@Louwhie, would it work with the brook wingman fgc adapter?,
On a side note, I overclocked to 8000 hz and been having frame drop, appreciate that
what program did you use? for 8k
Does not change anything at 8k there are multiple videos and forums on that. Waste of time doing it.
@@TheOneAresHD it's the opposite actually,, Frames dropping in rocket league when at 8000 hz
@@DaLions_Den It does not on a mid to high end gaming machine. Been tested by many creators. But it’s all good. Just like how there are 8k mice and keyboards. I use both daily no issues. Matter of specs. 👍
@@TheOneAresHD bro I've seen it with my own eyes irdc what anyone else has to say go have a life bud
How does it feel in hand compared to the ds5? I have a dual sense edge im and I dislike it, it feels so huge in hand it’s uncomfortable imo. but I do notice the difference compared to the Xbox controller I have. I haven’t even OC’d it and it feels much more responsive. I’m hoping the wireless mode is similar polling rate and response time. I wouldn’t see why not all my mice g pro super light all have high polling rate that feels no different from a wired mouse.
Someone on reddit did the wireless polling test and it wasnt too far off my numbers. Envision definitely feels smaller then the Edge in hand.
It’s smaller then the edge and feels great in hand, the ergonomics are good but if you want to use all of the buttons it takes some getting used to.
@@nicholasvitter4236did you get the regular envision or the pro?
It is weird to me that no one has noticed, but this is just a Scuf Vantage 2; instead of PS4 and a volume slider. It is PC and has G buttons where the volume slider was.
This controller has a lot of the same (non-software) features that the Vantage 2 had. Oddly enough, people hated the Vantage 2; but love this controller? Although yeah has mechanical buttons, etc. but it really is a re-skinned and updated Vantage 2. They should have just launched as "Scuf Vantage 3"; but I can see why they didn't do that. As that controller wouldn't sell.
1 ms isnt gonna be noticable at all. For anyone that is unaware, there is 1k milliseconds in a second, and if you think you're gonna notice a 1/1000 delay, then let me know what you're smoking.
Your left stick already has drift?
Yup, I talked about it in my first video
I bought a scuff instinct pro about 2 months ago and soon as I received it, it had stick drift. Although they were pretty fast about the RMA I feel like I shouldn’t have to spend )$250 on a controller just to wait for it to show up for two weeks before o then be disappointed and have to return my BRAND NEW controller to get repaired. So from the time of purchase to the time I actually got to use the controller was about a month. Since getting my controller back within two weeks the B button is already getting stuck…… I hardly even use the buttons because I use the paddles. I see they at least dropped the price for this one a bit but as I can see still hitting you with the ole left stick drift right out the gate. That’s gonna be a easy pass for me😂😂😂have a good day man.
@@shipwreck19 I’ve been liking my controller but that stick drift is getting to me. I feel like this big of a company should always run tests on these controllers before they ship them out.