Mate honestly the best content I’ve seen the way you explain everything is second to none I appreciate it and I will be hitting you up for some advice I’m sure when my BLS Version arrives in a few days
you cant really make the overdrive gears work with a different housing. Changing the gears is not an option. this is why they had to redesign the housings. You can dremel the original brass to make room for the overdrive if you want.
OVERDRIVEN!!! Nice vid. Awesome that they hit that 20% OD ratio. My preference is right around that amount, maybe a little more. Running 24% od in my scx24, around 25% total in my trx4m tarantula (16% rear ud, 9% front od). for my terrain and builds it seems to be that sweet spot where I'm getting as much benefit as possible without running into loss of traction on sidehills. Really wish they'd come out with more gearing options for the fcx24. best I've found is like 11% over. makes me think about swapping in one of the hobby plus axles, but by that point I'd probably rather just buy the evo pro.
There are aluminum ones by furitek (unless they are steel, I can’t remember) The evo pro and fx118 are the same. Also, I think there are some people out there who can sell custom brass links for these.
Also, the flysky noble has an expansion port to plug in other protocols (like the mini z stock protocol) the mt12 would have been amazing if they had a port like this to add expansion chips.
The MT12 doesn’t have anything to do with the protocols it supports they are from two different open source projects. ELRS & Multi Module who makes & supports the 4-in-1 module. Pascel the head 4-in-1 developer is darn good at reversing protocols. But ANT uses a chip that is not in the 4-in-1 module, may even be a chip that is proprietary to Flysky can’t say.
Hello friend, how are you, I have an FMS car, a K5 blazer, but the control is very crazy, I think it's on a bad frequency, I finally managed to pair it, I'm from Colombia, do you think you can help me?
It shares same axel as Fx118 correct? How did the portal covers work with overdrive gears?I was told/shown It takes mods to brass cover to be able to use OD gears to work on fx118
Thank you for all your videos. Great info. I think you are the only one showing how to modify a crawler step by step without pushing on products.
Thanks a ton. That means a lot to me.
very inspirational! i have one of these and i love fuckin` around with setups
It’s such a blast!!
Overdriven. A lot of info, made my choice easier. Thanx you very much!! Will make use of your video to guide me in doing the overdrive gears.
Glad it was helpful!
I was looking for upgrade for my Evo Pro and found them here again. Thanks. Overdriven
Glad to help!
Very nice! Installed the rcawd complete front and rear axle set. Much needed upgrade.
Right on, I bet it’s a blast!
Overdriven!
I’m moding as I watch
Thanks for watching the whole video!!!
Mate honestly the best content I’ve seen the way you explain everything is second to none I appreciate it and I will be hitting you up for some advice I’m sure when my BLS Version arrives in a few days
I appreciate that!
Overdriven! I am gonna have to add one of these to my fleet.
It’s a bad ass rig!!
Great, now I gotta buy v2 boxes for my 3 hp axle rigs… I wish they made them work within the original brass.
you cant really make the overdrive gears work with a different housing. Changing the gears is not an option. this is why they had to redesign the housings. You can dremel the original brass to make room for the overdrive if you want.
OVERDRIVEN!!!
Nice vid. Awesome that they hit that 20% OD ratio. My preference is right around that amount, maybe a little more. Running 24% od in my scx24, around 25% total in my trx4m tarantula (16% rear ud, 9% front od). for my terrain and builds it seems to be that sweet spot where I'm getting as much benefit as possible without running into loss of traction on sidehills.
Really wish they'd come out with more gearing options for the fcx24. best I've found is like 11% over. makes me think about swapping in one of the hobby plus axles, but by that point I'd probably rather just buy the evo pro.
I feel like the longer the FCX platform sticks around, the more support its going to get.
overdriven... thanks for the vid and tips
Thanks for watching!
Thanks for the upload! This is great info for a newbie.
You bet! This is exactly why we make content!
nice one ser. that was overdriven.
Thank you kindly for watching it all!
Great video as usual sir and thanks for sharing. Overdriven!
Thanks for watching! You are awesome!
That was great information! Thank you for sharing!
Glad it was helpful! Thanks a ton for watching.
Overdriven👍
Thanks for the watch!!!
Apparently I'm supposed to comment "Overdriven".
Good video, thanks man
Hahah yeah, only if you watched the whole thing! ;-) Thanks a ton for your viewership!
Nice upgrades mate it was comfortably overdriven. 👌🏻
Yes it was! Thanks for the watch.
Do they make upgrade links for these in aluminum or brass? Will the other CR18 links work, or different geometry?
There are aluminum ones by furitek (unless they are steel, I can’t remember)
The evo pro and fx118 are the same.
Also, I think there are some people out there who can sell custom brass links for these.
Overdriven!
Thanks for watching it all!
Curious how much this helps the torque twist on the angle board
the reverse output shaft is your best bet to remove toque twist
Will these portal cover work with a fx118 Katana with over drive cause there bras portal cover say they won’t work with over drive
As long as they are the v2 portal covers, they will work. The fx118 and the evo pro are the exact same axles.
That’s a great looking truck & it crawler very well out of the box from the videos I’ve watched. Has anyone tried binding it to am MT12?
I’d also like to know if anyone has easily bound it to the mt12
The Evo Pro is using Flysky’s ANT protocol so it can’t be ported to the MT12 because ANT uses a chip that is not in the 4-in-1
@@GeezerGramps bummer. I feel like a ton of rtr are on ant. I feel like that should have been a protocol they considered heavily when making the mt12
Also, the flysky noble has an expansion port to plug in other protocols (like the mini z stock protocol) the mt12 would have been amazing if they had a port like this to add expansion chips.
The MT12 doesn’t have anything to do with the protocols it supports they are from two different open source projects. ELRS & Multi Module who makes & supports the 4-in-1 module. Pascel the head 4-in-1 developer is darn good at reversing protocols. But ANT uses a chip that is not in the 4-in-1 module, may even be a chip that is proprietary to Flysky can’t say.
Hello friend, how are you, I have an FMS car, a K5 blazer, but the control is very crazy, I think it's on a bad frequency, I finally managed to pair it, I'm from Colombia, do you think you can help me?
You'd have to try and describe what your issue is.
It shares same axel as Fx118 correct? How did the portal covers work with overdrive gears?I was told/shown It takes mods to brass cover to be able to use OD gears to work on fx118
I mentioned in the video that these portal covers are the v2, so they worked great!
@TheShopMiniRC ahhh I must of missed that. The v2 will have no issues with fx118?
@@OGKDOG104i haven’t physically put them on the fx118, but they are the exact same axles so they should be 100% fine.
I Need to find a link for those v2 specifically.
Edit..Found them on helidirect
I wished you wouldn't play music, I'd much rather hear how quiet or loud the truck is.
Most of my running video now has a section with no music. So those who want music, get some, and those who don’t, also get some footage without.
overdriven
Thanks a ton for watchin!
Is there a plug and play light kit for it ? Really just need headlights or a light bar .
I don’t think there is a kit specifically for the evo pro… but there are tons of great lights for the 1/24s and 1/18s that would work! Check Amazon.