Thanks so much for the 6.46mm diameter info! I accidentally got the 6.35mm and they were way too loose in the magazine for my Huben GK1 25 Cal. They still fired really well and penetrated like CRAZY, but they jam when you try to rotate the magazine yourself. I'll give the 6.46mm a shot, literally. 😆
@@backyardairguns hey Mike 🙌🏻, such a great idea for magazine speed loading you had , if I get a gk1 I will definitely buy a magazine speed loader man 👍
Awesome pcp but I can't stop the slow leaking. It held pressure when I got it from the store and I left it in it's case for about a month. When I started shooting it, I never came below 150 bar so no harm there, but it started to slowly leak at some point. I opened it up today for the 3th time in 2 months and cleaned everything and replaced all the o-rings. Now it's filled up again. It drains about 400 bar a week and I have no clue where from. I even tried soapy water . . . fingers crossed 😉
My Huben GK1 25 caliber I was able to punch through a 2x4 with 34 gr JSB and heavier slugs. I also shot through two 1" pine boards with the H&N hornet. This PCP is amazing. Have a good day everyone.
@@jessicasmith957 I have the slug mold from Gregor at home so I re-use all the lead I can find in the trap. Some are slugs are 48 grains, others are 51 grains and they all fly like a laser at 50 meters. This is an awesome little 'tool', but as soon as they start to leak mweehhh it becomes problematic especially when they leak so slow that you only see it when you wait 24 hours.
Welcome to the channel. This is a great PCP pistol and really fun to shoot. Below is the link to the red laser I used on this pistol. I get them on Amazon. $15 Red Laser I used in the video: a.co/d/h0pItHs $14 Red Laser that I will try on this pistol: a.co/d/ckXLwj4
Just ordered.mine. Been ha. Ving a tough time choosing which one to get cause there are so many good pcps.. But there aren't many pistols that have a lot of power and there's still considerably a pistol. There is the m fifty but has a bolt action instead of semi. I've been told to use 253-254 slugs. Got nsa,254,36grn
It's a great pistol. The Altaros 51g 25 cal 6.46 slugs work great. I plan to order some of the NSA 253-254 slugs and try them. I would not use 6.35 slugs because they jam.
I seen your vids on the forum. Ive had a gk1 since they came out. Good videos bro. Appreciate the time and effort
David
I appreciate it David!
Good review thanks thinking about buying one!
Thanks - It is really a fun pistol to shoot.
Thanks so much for the 6.46mm diameter info! I accidentally got the 6.35mm and they were way too loose in the magazine for my Huben GK1 25 Cal. They still fired really well and penetrated like CRAZY, but they jam when you try to rotate the magazine yourself. I'll give the 6.46mm a shot, literally. 😆
Altaros 51g 6.46 shoot really great in this pistol. I also saw where NSA make some 6.4x slugs in 25 Cal. I have not tried those, but I plan on it.
ZAN 38 grain .253 slugs work great too. Anything below .253 is no good.
🦾🦾👍 thank you !
What up Lead! :-)
@@backyardairguns hey Mike 🙌🏻, such a great idea for magazine speed loading you had , if I get a gk1 I will definitely buy a magazine speed loader man 👍
Love you intro music, very nice / informative video. Keep em coming!
Thanks Kurt. I have at least two more videos coming on the GK1.
Sheesh that yoko is loud!!!!
It's not too bad. But without it, it's crazy loud.
@ I have 5 or 6 moderator for my gk1…. Yoko is gonna be my last one… quietest so far is the hugget sniper
Saving my dinero up for this pistol. No more purchases until this one hits my channel.🤠🇺🇸
You will love this PCP pistol!
Happy Thanksgiving. Be well.
You too Amado!
Awesome pcp but I can't stop the slow leaking. It held pressure when I got it from the store and I left it in it's case for about a month. When I started shooting it, I never came below 150 bar so no harm there, but it started to slowly leak at some point. I opened it up today for the 3th time in 2 months and cleaned everything and replaced all the o-rings. Now it's filled up again. It drains about 400 bar a week and I have no clue where from. I even tried soapy water . . . fingers crossed 😉
My Huben GK1 25 caliber I was able to punch through a 2x4 with 34 gr JSB and heavier slugs. I also shot through two 1" pine boards with the H&N hornet. This PCP is amazing. Have a good day everyone.
@@jessicasmith957 I have the slug mold from Gregor at home so I re-use all the lead I can find in the trap. Some are slugs are 48 grains, others are 51 grains and they all fly like a laser at 50 meters. This is an awesome little 'tool', but as soon as they start to leak mweehhh it becomes problematic especially when they leak so slow that you only see it when you wait 24 hours.
Agree - This thing Thumps
Hi, nice video, could you please add the reference of the laser point used, thank you, a new subscriber.
Welcome to the channel. This is a great PCP pistol and really fun to shoot.
Below is the link to the red laser I used on this pistol. I get them on Amazon.
$15 Red Laser I used in the video:
a.co/d/h0pItHs
$14 Red Laser that I will try on this pistol:
a.co/d/ckXLwj4
Just ordered.mine. Been ha.
Ving a tough time choosing which one to get cause there are so many good pcps.. But there aren't many pistols that have a lot of power and there's still considerably a pistol. There is the m fifty but has a bolt action instead of semi. I've been told to use 253-254 slugs. Got nsa,254,36grn
It's a great pistol. The Altaros 51g 25 cal 6.46 slugs work great. I plan to order some of the NSA 253-254 slugs and try them. I would not use 6.35 slugs because they jam.
Meant to ask to, this was part 3 and I saw part 1, what happened to part 2 . Thanks
I'm still editing Part 2. Part 2 focuses on pellet accuracy using JBS, JTS, and AEA pellets.
Great, pretty anxious to see. Thanks for sharing!
whats the max energy can you get out of .22 cal version then?
I'm not sure on the 22 Cal.
Must have missed part 2 🤷♂️
Part 3 got edited before Part 2. I know it's confusing. I plan to get Part 2 (Pellet Accuracy) out soon.