Made a 3d printer from your video then printed parts for the new one made 2 sold one then printed parts for assembling old one now i have sold 2 printers and I have two printers ...and now make a 45cm x45cm x45cm printer with multicolored pla all thankz to you guys for growing the urge to make a 3dprinter....thankz
Best video for making a 3-D printer ever! 10/10 I’ve been looking for a person who knows how to make a good video step by step video. Definitely subscribing. I hope all your future videos are this in depth when necessary because others seem to gloss over the details.
This is the best video I have come across for making a 3D printer without a 3D printer. Hats off to you. Desi engineers are always the best!!! I am going to make this finally after watching so many videos but was stuck because in every video they needed 3D printed parts. You are simply the best 😘
It looks to me like the gantry carriages are backward - with this design, you'd want the X axis rod supports outside the Z axis rods, not inside. You lose a few centimeters of usable travel on each side having them set this way. Swapping the L and R Z-axis carriages (which would put the X axis stepper on the right so setting the controller to reverse that axis' direction would probably be required) and moving the Z axis steppers/screws outside the frame would give much more working area by allowing the hotend carriage to travel the full width of the frame.
I want to ask, for 3D printing there will be a size, between the print and the size of the frame will be adjusted. how do we change the print program on 3d print.
Well done! Very nice diy project. But for me as a technician there is a problem. The final product for the total cost of building, I mean the total cost of the parts, the project is very bad. I believe if you make some upgrades the printer will be much better than this! Keep up dude!!
Print something that will be printed over all four hot plates and don't cheat with something like 10x10cm in a center. Would like to see how much it will bend... Nice printer! :D
Yes of course in video 37:58 to 38:19 I clearly mentioned that "this is temporary arrangemnt" and yes some work is pending due to this project is college project and deadline of submission is so close and another reason is "Heated Bed Leveling Hand Adjustment Fixing Nut" this part is not available near my local market. give me some time I will upload whole 3d print object which will cover all four plates thanks, :D
I'm making a 3D printer myself I'm using Ramps 1.4 kit , the problem is my motors are not able to rotate in +x,+y,+z and if I change the wiring I'm unable to move in -x,-y,-z please I'm stuck need some help
Hi I respect your work🙂👌 I made my own 3d printer very nice but I can't pogram it . Could you please send me the code that you use? (I say the arduino code) 🤩
Hello, I have a question. I clicked on the link in order to get the pdf file but there were no measurements on the file. Is there another place that I might be overlooking?
At the base of the print it looks like it's got an indent where it was no longer printing straight up. Did you figure out what was causing that issue and did you since fix it?
yes because of some fault in my x-axis stepper motor, it misses some step and, so I thinking about upgrade higher current rating stepper motor only for x-axis and change DRV8825 stepper motor driver instead of A4988.
HI sir this is very nice and beautiful and i subscribed your channel sir but please help me where is the port to connect the pendrive to insert the stl file to the printer?? or should we connect the printer directly to the printer or is it wifi based?? how we should send the stl file to this printer please reply to this comment or make a video regarding this question i am making this project for my school expo can we add a LCD display to this if we can please give me the arduino code link please will this work on all four plates of the hot bed?? thank you sir
Dude u can connect a LCD to the RAMPS board and it supports TF cards to give file otherwise u need to connect Arduino to pc and give code through pronterface
in my case misalignment found in the only z-axis (8 mm lead screw) setup which I eliminated by some extra sheet of acrylic or aluminium according to the requirements.
70 usd can be 3d printer bro... All frame built from alumunium profile, and used stepper motor ... Used stepper motor only 10 usd for 5 pieces... And ramps 1.4 kit only 20 USd.🤭🤭
Made a 3d printer from your video then printed parts for the new one made 2 sold one then printed parts for assembling old one now i have sold 2 printers and I have two printers ...and now make a 45cm x45cm x45cm printer with multicolored pla all thankz to you guys for growing the urge to make a 3dprinter....thankz
Best video for making a 3-D printer ever! 10/10 I’ve been looking for a person who knows how to make a good video step by step video. Definitely subscribing. I hope all your future videos are this in depth when necessary because others seem to gloss over the details.
This is the best video I have come across for making a 3D printer without a 3D printer. Hats off to you. Desi engineers are always the best!!! I am going to make this finally after watching so many videos but was stuck because in every video they needed 3D printed parts. You are simply the best 😘
It looks to me like the gantry carriages are backward - with this design, you'd want the X axis rod supports outside the Z axis rods, not inside. You lose a few centimeters of usable travel on each side having them set this way.
Swapping the L and R Z-axis carriages (which would put the X axis stepper on the right so setting the controller to reverse that axis' direction would probably be required) and moving the Z axis steppers/screws outside the frame would give much more working area by allowing the hotend carriage to travel the full width of the frame.
You are the best channel i found to be showing all the necessary things to do it
He has the plans available on his Instructables page in PDF format for download, loved this build thanks for sharing.
This is a beautiful 3D printer I will also make it
I want to ask, for 3D printing there will be a size, between the print and the size of the frame will be adjusted. how do we change the print program on 3d print.
mr your very serious with your work good work
Well done! Very nice diy project. But for me as a technician there is a problem. The final product for the total cost of building, I mean the total cost of the parts, the project is very bad. I believe if you make some upgrades the printer will be much better than this! Keep up dude!!
Hey, the project is amazing. We want to feature it on our channel (with proper credits). If it sounds good, then kindly reply.
can I ask if you adjusted the current rating of the stepper motor driver at first? and at what initial current .. thanks a lot !
It was a great project you made.
I have made my own printer but it keeps going out of the plane if there anything you can help me with it.?
Dear, this is awesome. Could you send me the parts list I canot find it. I need this for my school project. Thanks
Print something that will be printed over all four hot plates and don't cheat with something like 10x10cm in a center. Would like to see how much it will bend... Nice printer! :D
Yes of course in video 37:58 to 38:19 I clearly mentioned that "this is temporary arrangemnt" and yes some work is pending due to this project is college project and deadline of submission is so close and another reason is "Heated Bed Leveling Hand Adjustment Fixing Nut" this part is not available near my local market. give me some time I will upload whole 3d print object which will cover all four plates thanks, :D
what type of glass sheet do you used for the bed
hola amigo muy buen video lo felicito pero como conectaste las 4 cama caliente
Hi Sir, I'm curious, I'm currently working on this project and I'm wondering where to put the X,Y,Z end stops. Thanks.
can we attach a laser and do metal/acrylic cutting also on this?
Yes
Are those smooth rods.. Chrome Plated
Отличный проект.Только,аккуратности бы больше.Наверное не для себя делали.
Nice
you deserve way more subscribers
Hello,
I need help of your on marlin firmware
Could you please help me
Hello, could you update parts list? Because old page with them is down.
I'm making a 3D printer myself I'm using Ramps 1.4 kit , the problem is my motors are not able to rotate in +x,+y,+z and if I change the wiring I'm unable to move in -x,-y,-z please I'm stuck need some help
Did you install end stop's or not
?
Does the printer have to be plugged into the computer for the entire duration of the print?
Yes
SIR, WHICH SOFTWARE HAVE YOU USED TO DESIGN 3D PRINTER MODEL BLUEPRINT IN 3D VIEW
You are amazing
Bro I did the code configuration, and it says "error compiling for board Arduino mega or Mega 2560
You should work on it further more and develop it as an industrial grade product.
Hi
I respect your work🙂👌
I made my own 3d printer very nice but I can't pogram it .
Could you please send me the code that you use?
(I say the arduino code)
🤩
Hello, I have a question. I clicked on the link in order to get the pdf file but there were no measurements on the file. Is there another place that I might be overlooking?
content.instructables.com/ORIG/FK3/0NFL/JSITQ0MB/FK30NFLJSITQ0MB.pdf he put this pdf it has all the measurements
At the base of the print it looks like it's got an indent where it was no longer printing straight up. Did you figure out what was causing that issue and did you since fix it?
yes because of some fault in my x-axis stepper motor, it misses some step and, so I thinking about upgrade higher current rating stepper motor only for x-axis and change DRV8825 stepper motor driver instead of A4988.
@@desiengineer7162 good to know. I'll stay away from the A4988. Thanks
Some hole not mentioned in the drawing can you give me a final blueprint
HI sir
this is very nice and beautiful
and i subscribed your channel sir but please help me
where is the port to connect the pendrive to insert the stl file to the printer??
or should we connect the printer directly to the printer or is it wifi based??
how we should send the stl file to this printer
please reply to this comment or make a video regarding this question
i am making this project for my school expo
can we add a LCD display to this
if we can please give me the arduino code link please
will this work on all four plates of the hot bed??
thank you
sir
Dude u can connect a LCD to the RAMPS board and it supports TF cards to give file
otherwise u need to connect Arduino to pc and give code through pronterface
How to power the printer please help me out
Great
this process is not working with Arduino Mega 2560 + RAPMS 1.4
What is the total cost of this project?
The information should be related to where did u put the holes and at what distance.plss help i m interested in ur project
read the PDF!
I'm building it need audrino code pls help me sir
Arduino Uno se kaam chal jaega?
No. It cant handle these codes like mega
Sir 4 heatbed ka connection kasa kara
Can't you do it with normal motors?
No
From where to buys link is not working
This is the exact video I was looking for, thank you so much, this is amazing!
How did you eliminate axial misalignment?
in my case misalignment found in the only z-axis (8 mm lead screw) setup which I eliminated by some extra sheet of acrylic or aluminium according to the requirements.
How much cost?(in Rps
Hi , how did u connect those four pcb heated bed
Is there any drawing
Sir I'm going to make this but I don't know how to download arduino code please help me sir
I found it thanks
Sir one more question what is the motor model it has two modules
30A motor OR 2.8v/.1.7A motor??
@@kavinavishka3369 I need audrino code and part buying link can you help me
The estimated price for the stuff without the frame would be $100
70 usd can be 3d printer bro... All frame built from alumunium profile, and used stepper motor ... Used stepper motor only 10 usd for 5 pieces... And ramps 1.4 kit only 20 USd.🤭🤭
@@Oke_teknik can you give the links
@@sathibabu5559 its only in my local market place bro, im indonesian
@@Oke_teknik Hello can you tell me please why Ender 3 better than anet a8
Sir, the link doesn't work - From where to buy parts and more info: www.hackster.io/DesiEngineer/how-to-make-a-big-3d-printer-at-home-using-arduino
codes plz
Can I have your phone sir?
Ты скопировал у Томаса
Bro if u provide me proper measurement then i will provide yuou more than 1000 subscribers from my second youtube channel two side gamers
[33:15]
bhai mujhe tumhara number dona mae contact kroga
Ur links has been expired