Make sense cause i found a couple of videos that go like this 1 get a wood panel 2 get 2 sticks 3 get a 3d printer to 3d print small parts you will need 4 etc etc you get the point Like why did i search this video if i want to build it not buy it and then build it
@@Bob-tb9ew you can buy a printer, print the parts and then return the printer for a full refund. Or maybe someone you know has a printer and can print those parts for you.
Wow sir! This was one of the easiest 3d printers in youtube! As a child I will do it coz i want it ta make keycaps for my mechanical gaming switches! Thanks!
This is actually really cool idea. Should be considered a reprap because it has the ability to print upgrades for itself and parts for another machine. Around how much did this cost you to build?
Some questions: - Why place a fan under the bed if hotbeds are normally used? - On ramps 1.4, do you use full steps or micro steps (connecting jumpers)? - A4988 drivers require calibration, how have you done it?
por casualidad tienes los planos hechos es que no se que voltaje ni donde conectar en el arduino los drivers o motores faltan muchos detalles para construirlo
I have a big problem. Is it okay when you add the 12v adapter that on the ramps 1.4 there's a red light and the mosfet is heating up? Really need an answer please. Thanks
depending on the size of ur needs, this diy makes the printer a lot cheaper than the official one...one small error on the calculations can cause perfection integrity of the printed item..
at 3:37 you put two wooden pcs to base of y axis but how can platform move on t axis because you didn’t attach platform to lens which is moving part? please explain this
Hello, I can't find the "slider" , I need the stuff in the "Slider" link.. Can you give me links for every part so that I can know them all and look for them in other websites Thanks !
I did build this 3d printer as well and the coding isn't bad either took me a while because of work however I really enjoyed this and do plan on building another one
hey, i am thinking of building a one as my final year project in university but i have somethings unclear would u mind giving me some help explaining me how u built it and how it does actually work?
When I glanced at the wiring diagram (in which im also making a 3d printer ) how comes the positive wire the red wire, is in the negative port on the extruder end?
#Arduino #LEDbrightness #Projectideas Simple LED Brightness Control with Arduino | LED की चमक को नियंत्रित करना सीखना | Simple projects ruclips.net/video/9ODlOXQ7fUU/видео.html Program Link: - prokamsocial.blogspot.com/2022/04/simple-led-brightness-control-with.html
Olá tomei coragem em vê seu canal , Montei uma impressora caseira arduino mega 2560 ramps 1.4 Fui testar os eixos X,y,z ok mandei pre aquecer abs pelo display gráfico liguei o fan 70 % e ao chegar em 240graus mandei o motor da extrusora mover 10mm e nada de ligar o motor ,tem ideia o que posso fazer pra saber onde tá o erro ?
TecH BoyS ToyS, приветствую вас! Подскажите пожалуйста, какое напряжение выставили на драйверах? Собрал себе такой же принтер, но почему-то после нескольких минут печати он отключается, похоже что уходит в защиту. TecH BoyS ToyS, I welcome you! Please tell me what voltage set on the drivers? I assembled the same printer, but for some reason, after several minutes of printing, it turns off, it seems that it goes into defense.
no arduino uno and nano do not have de capacities to generate an algorithm whith two or more actions at the same time the only on that can do that is mega and otherwise there is no shield for the uno or nano
Because combining 1axis with extruder axis will significantly reduce mechanical noise. This design is not so good if you don't have good stepper motor drivers.
hi sir actually i do this printer in your reference video but i have used my stepper motor driver current is 0.35 and my axis is working but i click the print button my printer is fastly run and x and y axis is suddenly run and stop ........what is your default axis#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.70, 80.70, 164.70, 93.80 },and my acceleration #define DEFAULT_MAX_ACCELERATION { 350, 350, 350, 10000 }..........which value is used in this axis and acceleration .....
I suggest following a wiring diagram to the exact, try testing your parts out , if your motors got very hot trying checking your wiring based on a diagram also check your Voltage and amperage if it excess to amount of amps per motor try using 1 or 2 10 k ohm resistors and try from there. Formula I = v times r also note check the voltage of a small 12 voltage stepper motor ro see how many amps it can handle
Hello, greetings, I am delighted with that project, how much would you make one for me? I need one to print miniatures at 1:64 scale, I am living in Brazil and I am Venezuelan.
One of the very few DIY 3D printers that didn't require a 3D printer to build it.
Make sense cause i found a couple of videos that go like this
1 get a wood panel
2 get 2 sticks
3 get a 3d printer to 3d print small parts you will need
4 etc etc you get the point
Like why did i search this video if i want to build it not buy it and then build it
lol true
@@Bob-tb9ew you can buy a printer, print the parts and then return the printer for a full refund. Or maybe someone you know has a printer and can print those parts for you.
@@davidvreugdenhil4557 3d printing service
true
I think someone who manage a project like this, will be able to manage other projects easy.Good Training!
The kludge level of everything here is masterful. Especially the drill press!
proud of you homie I see not just a printer... this looks like art
Wtf
you deserve a tousand thumbs up dude! one for the reversed time laps, looks so nice
The title made me think
“Mom! I want a 3D printer!”
“We have 3D printer at home”
3D Printer at home:
palayan yanne
Wow sir! This was one of the easiest 3d printers in youtube! As a child I will do it coz i want it ta make keycaps for my mechanical gaming switches! Thanks!
did you make it?
Did u make it
the one issue is finding the parts.
This is actually really cool idea. Should be considered a reprap because it has the ability to print upgrades for itself and parts for another machine. Around how much did this cost you to build?
looks like the new parts were the power supply / extruder / hotend / ramps / arduino everything else was salvaged.
@@robertl7522 must be somewhere near 75 bucks
this RUclipsr is like : "I will respect my viewers by liking their comments",
viewers: "I have a question ?"
RUclipsr: liking without answering.
I guess this guy...
...
...
...
Don't like you xD
its funny cuz im going through the comments and this is one of like 4 that doesnt have a heard
feelsbadman.jpg
This is the only one that doesn't have likes lmao
@@megazard :feelsadman:
:D
Some questions:
- Why place a fan under the bed if hotbeds are normally used?
- On ramps 1.4, do you use full steps or micro steps (connecting jumpers)?
- A4988 drivers require calibration, how have you done it?
@Manuel Jiménez Montes here are the answers to your questions:
-A fan under the bed is used just to cool the electronics.
-Full steps
-Yes he has
@@treasuretotrash2067 he said how too
@@treasuretotrash2067 yeah the DVD sliders get hot
por casualidad tienes los planos hechos es que no se que voltaje ni donde conectar en el arduino los drivers o motores faltan muchos detalles para construirlo
Nice work, Could you please let us know how you fixed the two sliders. Ref. 3:48 to 3:52 in video. Thank you,
appears he just clamped them down with some wood
I have a big problem. Is it okay when you add the 12v adapter that on the ramps 1.4 there's a red light and the mosfet is heating up? Really need an answer please. Thanks
La Mejor Impresora 3D del mundo!!! Muchas Gracias!!
depending on the size of ur needs, this diy makes the printer a lot cheaper than the official one...one small error on the calculations can cause perfection integrity of the printed item..
The video is short but he explains it better than everyone els on his website
Wow 😍 nice video thank you
Welcome
can i use the arduino uno instead?
Excellent engineering and good quality prints considering.
at 3:37 you put two wooden pcs to base of y axis but how can platform move on t axis because you didn’t attach platform to lens which is moving part? please explain this
The lens is connected to the lower lens, this time the lens is not moving, upper lens is stable only the body is moving ❤️
@@techboystoys ok got that
thank you, im going to make if i need any help will contact you
people are just crazzy, love it
Jo appne stepper slider use Kiya hai vo dvd drive se nikala hai ya vo alag hai please tell
Made respect from malaysia!
Is it ok if I use 2 same dvd writers? Pls answer
Does your diy 3d printer support obj and stl... Where do I insert my flash drive... 😳..😁
Where is the video for the drill press found at 3:04?
what is the suitable extruder for TPU??
Hello, I can't find the "slider" , I need the stuff in the "Slider" link.. Can you give me links for every part so that I can know them all and look for them in other websites
Thanks !
Wow Nice performance for a cheap diy 3D printer wow
I did build this 3d printer as well and the coding isn't bad either took me a while because of work however I really enjoyed this and do plan on building another one
hey, i am thinking of building a one as my final year project in university but i have somethings unclear would u mind giving me some help explaining me how u built it and how it does actually work?
Hello, can you give me the code for this 3D printer?
Heyy...can you please share the code for Arduino as I am a CSE student and I am making it for my IOT project so I don't know how it's coding works
very interesting, and it seems simple, and can be repeated in a larger size)
Нет. Там ограничение по направляющим двд рома
very smart .. i love it
Hey I know you
How large things can we make with it ????
When I glanced at the wiring diagram (in which im also making a 3d printer ) how comes the positive wire the red wire, is in the negative port on the extruder end?
Love your vedios awesome I am your biggest fan ever from Pakistan
What about the heated table? It is not necessary?
Well done!
Can i change z axis with dvd slider?
do not forget about the motor drivers jumpers that need to be inserted on the ramps board - pause the video on 05:06
Very nice video. Can you tell me why you used 2 step motor up?
one for x
one for y
Usando esas piezas más o menos cuánto sería la máxima dimensión de impresión???
Can i use the damaged hard disc
#Arduino #LEDbrightness #Projectideas
Simple LED Brightness Control with Arduino | LED की चमक को नियंत्रित करना सीखना | Simple projects
ruclips.net/video/9ODlOXQ7fUU/видео.html
Program Link: - prokamsocial.blogspot.com/2022/04/simple-led-brightness-control-with.html
Olá tomei coragem em vê seu canal ,
Montei uma impressora caseira arduino mega 2560 ramps 1.4
Fui testar os eixos X,y,z ok mandei
pre aquecer abs pelo display gráfico liguei o fan 70 % e ao chegar em 240graus mandei o motor da extrusora mover 10mm e nada de ligar o motor ,tem ideia o que posso fazer pra saber onde tá o erro ?
I definitely try it
TecH BoyS ToyS, приветствую вас! Подскажите пожалуйста, какое напряжение выставили на драйверах? Собрал себе такой же принтер, но почему-то после нескольких минут печати он отключается, похоже что уходит в защиту.
TecH BoyS ToyS, I welcome you! Please tell me what voltage set on the drivers? I assembled the same printer, but for some reason, after several minutes of printing, it turns off, it seems that it goes into defense.
Bro I have a doubt can we use Arduino Uno inserted of Arduino maga ?
PLEASE CAN I GET A LINK TO BUILD THIS
I WILL REALLY APPRECIATE IT AND PROGRAM(BACK-END CODING). Thank you, God bless you
Bro you are great
how many thing are you used for making 3D printer
Y EL LINK DE LOS PROGRAMAS Y FIRMWARE?
Without hotbed can use?
Can you say where can i get only slider
Thank you so much sir! But I have a question, can I use arduino uno or arduino nano instead of arduino mega?
I want to know the same thing
no arduino uno and nano do not have de capacities to generate an algorithm whith two or more actions at the same time the only on that can do that is mega and otherwise there is no shield for the uno or nano
No
You are so smart💖
CAN I USE 12VOLT AND 2AMP INSTEAD OF 5AMP
how can i use filaments of multicolour
How much is it with shipping to Algeria? And how long does the arrival take?
Awesome video your Channal reach 1 million subscribers
Can I use a supply of 12V 10A?
Can we use 12V 10amp power supply?is there any problems?
Sahi he lage raho me to u kahu tha ek time masin bhi bana lo bhayi or meri bat ka bura na manna video boht achchi thi is liye like kari or
A very very good video sir
What is the speed. Mm of height per hr?
Why are you cooling the table bed?
Hey there can you please explain how to used it please
the x ,y ,z have two sides ,why only add one Micro Switch?
Dude you really did a great job
Can I make a 3d printer using DVD writer please reply me
OMG man thank you its worked
That’s an interesting XY stage, o don’t think I’ve seen one like that before, most move the extrusion head 🤔
Because combining 1axis with extruder axis will significantly reduce mechanical noise. This design is not so good if you don't have good stepper motor drivers.
The z seems off looking at the cube height.
Amazing video and project.
well not bad considering its 90% from garbage lol
hi sir actually i do this printer in your reference video but i have used my stepper motor driver current is 0.35 and my axis is working but i click the print button my printer is fastly run and x and y axis is suddenly run and stop ........what is your default axis#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.70, 80.70, 164.70, 93.80 },and my acceleration #define DEFAULT_MAX_ACCELERATION { 350, 350, 350, 10000 }..........which value is used in this axis and acceleration .....
Bro best of luck....
Is that 12v or 5v fan?
Hello;
Step motors get very hot and make noise. What should I do?
I suggest following a wiring diagram to the exact, try testing your parts out , if your motors got very hot trying checking your wiring based on a diagram also check your Voltage and amperage if it excess to amount of amps per motor try using 1 or 2 10 k ohm resistors and try from there. Formula I = v times r also note check the voltage of a small 12 voltage stepper motor ro see how many amps it can handle
what type of cardboard is this ?
My eyes hurts from watching this, it's so ingeniously engineered
Can it make big things
We can use ardiuno uno
Hello, greetings, I am delighted with that project, how much would you make one for me? I need one to print miniatures at 1:64 scale, I am living in Brazil and I am Venezuelan.
Can we use Arduino uno
Parabéns brother, fico muito bom , ensina a programação agora , 👏👏
@Igor F Oliveira kkk , poderia entender né rs
na descrição tem o link pro video que ensina
It is so nice and usable 👌
@TecH BoyS ToyS Hi I loved your work! What's the max part size that you can print with this printer?
Which Software Using for Circuit Diagram
is there a way to use an sd card?
Wow mantap....
patut dicoba, saya suka videonya
Next tutorial 3d pen at home please make a video from Tamil Nadu
this guy is totally a neat freak
все хорошо))) вот только люфты на сверлильном станке повеселили))) но все равно все оч аккуратно и круто
I salute you bro
Sir, please make a 3d printer with infinity Z-Axis.
Have you gone mad
and you have to do one last thing which is easytoo
Calibrating the E-steps and extruder E-steps then you have a great 3D Printer
I enjoyed the good video.
What is the print volume of the printer
Video late aaya lekin faad aaya😊😊😊
how long did you finish?
Can you please tell the exact amount of the material
Why are the wires so colorful? How am I supposed to know which one is plus and minus?