GSX-R 750 SRAD Build: Dismantling the Engine Ep1
HTML-код
- Опубликовано: 6 сен 2024
- The first video of the GSX-R 750 Srad Race bike build.
In this episode I will show you how I start dismantling the engine.
If this content appeals to you please subscribe to stay tuned for more videos.
Should you have questions feel free to write in the comments.
Danke danke und nochmals danke für die tolle video reihe. Das hilft wirklich ungemein und man traut sich jetzt auch selber an die sache !
I know this video is old but I dropped the motor on a 1998 gsxr 750 srad because it had noise coming from the transmission. I was curious to know if I have to do a complete tear down of the motor to reach the trans? I’m asking this because it will be my first time working on my engine and I’m trying to get all the information in that I can.
Hey, You can acces the transmission from the bottom of the engine. Fix the engine reight side down in a stand then remove the oilpan, clutchcover etc. Then you can remove the lover half of the engine casting. once this is done you can remove the 2 pieces of the transmission. Since this is a fairly complex work I would recommend that you pick up the Workshop manual. all the work and tourqe values are explained there.
@@thesradchannel8818 I’m sorry for the late reply thank you so very much man🙏🏽
Great videos man! I have gsxr 1000k1 so it very informative for me to see how my engine works and looks inside. I think there would be not that many differences between srad and k1 in engine design?
Hey i am in serious need of picking at ur brain u seem to know ur bikes and ive got a 99 750 main bearings went bad not ruined i could have ridden it but took it out just bought a 97 motor and my plan was to swap the head and timing chain lower sprockets over from my 99 due to i just had the valves done on my 99 will the shimming change once ive swapped everything
Alguem sabe me dizer como faço pra consegui traducao desse video pra portugues.
Hello, I want to buy a used engine from a local shop. I have a 99 SRAD 750. The engine of the shop has a stamp on it which says 97. Is it normal? The serial no is:R733-100309
don't worry about casting markings. Just make sure the engine is a carb or FI model corresponding to you own bike. You can determine the two models by checking the valve cover. The FI engine has a cam position sensor on top of the cover ( Black electrical connector) wich the carburator model is missing.
@@thesradchannel8818 thanks for the answer
I have the same bike, 99 SRAD 750 (8000km).
In high rpm in 5th gear the FI red light flashed once, and then the light went off. What could it mean?
Hey! This could result from serveral things. The main indicator of the red LED is to warn you of missing oil pressure. So check if you oil level is correct and top the oil up if there is some missing. Another issue yould be a bad connection to ground on the oil pressure sensor. It's located on the bottom right side of the crank case and has a single green wire running of it. If there is exessive gunk on the sensor, clean it and check of the connection is good.
Hi es wäre cool wenn die Videos auch auf deutsch sind. Bzw vielleicht mit Untertitel
Help me please. I have questions about my gsxr 750 97 I take out the carburetor and is gasoline the valve!! I don't want wrong?!
i want to now somting my bike radiator coolant is come out
Sag mal muss man die Kopfschrauben erneuern oder kann man die alten wieder verwenden?
Hi sag mal, muss man eig nachdem man den Zylinderkopf mal vom Zylindef ab hatte ihn unbedingt hohnen lassen?
Oder neue dichtung drauf und gut?
Bzw. Hast du ihn hohnen lassen vorm H
Zusammenbau?
Nein, wenn die Dichtungsflächen des Zylinders und des Zykinderkopfs ohne Beschädigungen sind reicht eine neue Dichtung. Ich habe die Zylinderköpfe immer planen lassen um später eine etwas höhere Verdichtung zu bekommen.
Hi i wanted to know if you could help me with questions on my motor please
Hi mate, my bike sounds okay when RPM less than 4000, but it starts to produce knocking sound when I rev the RPM more than 4000.. its like a metal knocking sound.. I am wondering what causes the sound, it looks like the sound originates from the top end, . Thank you.
Hey, this could be casued by serveral things. I would check the valve clearance, camshaft postition and timing chain tensioner. You can check those by removing the valve cover. If I had to gues I would lean towards valve clearance or maybe you installed one of the cams slightly offset to TDC/BDC.
@@thesradchannel8818 Hi mate, thanks for your kind reply. Replaced tensioner 2yrs ago. What's the best way to ensure the camshafts having perfectly positioned? As far as I know is, during installation we've to ensure the marks (index) align properly by look it at the holes just above the place whereby we can manually crank the crankshaft. And furthermore we've to count the 15pins of timing chain right? Cheers mate.
@@zamzx10 Yeah the way you described the cam alignment is correct. Next would be the valve clearance. IIn the worst case the sound could come from a damaged bearing. It's hard to diagnose problems over the internet but I hope I can point you some ideas.
The SRAD Channel Hi mate, thanks again for your kindness help and input, is it useful to refer Hanynes manual, if so I would try to sort one. Cheers!
Need technical advice please
Hello friend, could you tell me what temperature the exhaust pipes can reach, because I want to put a thermotape tape to avoid damaging the fairings! and you have instagran? big hug.
Hey! I don't have an Instagram acount for the bike stuff but maybe I'll make on later... I used some glas fiber exhaust wrap tho protect the fairing from getting in contact with the exhaust. In aditition you can get youself aluminum tape from you local hardware store thats usualy used for ovens an stuff and put that on the inside of the fairing in the places where the exhaust comes close to touching it. Just don't use anything with adheasive on the exhaust directly. This yould be nasty when the glue starts to melt.
@@thesradchannel8818
thank you very much friend, you have some contact, so i can send you photos and videos of my srad 1996 project, she is practically ready, different, but very beautiful, thanks for always helping me with my doubts, a big hug, and good job.
hörst dich ein wenig an wie ein deutscher ? :D if you dont unterstand, i just said that you sound like a german, am i right ? :D
Da liegst du vollkommen richtig. :)
@@thesradchannel8818 😅👍