It moves and looks great! Just a tip, the mask may start to rip with the stroke of the cylinder, I would probably change it if I were you, most moons don't open the mouth that wide.
Thanks for the feedback! Yeah, there's a lot we need to change on his mechanism due to all the problems he always gets. I should probably observe other moons mouth openings like you said.
Ah yeah 😅 I put one of my gloves I use for yard work on his hand to test how the strum is capable of moving while the cosmetics are on. No guarantee that'll be Dodge's official hand, but you may see that again in case I use it for testing purposes in a video
Here's the cylinders I recommend: www.amazon.com/Tailonz-Pneumaitc-Cylinder-Connector-MAL25x150/dp/B082FXPCKD/ref=sr_1_3?crid=LCU6L6NV9P70&keywords=pneumatic+cylinders&qid=1668029443&sprefix=pneumatic+cylinders%2Caps%2C126&sr=8-3 They are the same ones that I use. As far as the programs, I got a MicroBlue24 from DSFRobots, but if you want one for cheap, I recommend using an Arduino and Relays that run on a free software called Vixen Lights. There should be tutorials on RUclips showing how to set that stuff up.
@@creaturesaurus9926 So the controller, plugged into a wall outlet, has this green thing called a screw terminal that you have a bunch of wires connecting to. Those wires from the screw terminal connect to the solenoid valves, and the valve's manifold is what you hook up the air compressor to. Then you have a thing of tubing that connects from the valves all the way into the slots on the cylinder. Pushing the button on the valve activates the cylinder as long as it is held down, but the controller does the button pushing for you so you can have all these movements going on at once.
Развлечения
I swear this feels more accomplishing than any Reel to Real thing I've ever done
Your room is now reel to real. You have succeeded my brotha.
Haha 😂❤
That “Woooo” at the end had me cracking up 😂
The "WOOOOOO!" at the end killed me 🤣
I Love The “WOOOOO” So Much
It moves and looks great! Just a tip, the mask may start to rip with the stroke of the cylinder, I would probably change it if I were you, most moons don't open the mouth that wide.
Thanks for the feedback! Yeah, there's a lot we need to change on his mechanism due to all the problems he always gets. I should probably observe other moons mouth openings like you said.
This feels like magic!
Looking good!
This is epic keep up the good work
Did anyone else see the guitar strum hand?
Edit: You can only see it for a few frames at 0:16 - 0:17
Ah yeah 😅 I put one of my gloves I use for yard work on his hand to test how the strum is capable of moving while the cosmetics are on. No guarantee that'll be Dodge's official hand, but you may see that again in case I use it for testing purposes in a video
@@Sea_of_Waves Ah, nice!
Dont stop me now
Awesome!
That’s awesome
Your lucky to have a moon..
Love to see that its working! also, why whas that fan going off?
That was the air compressor! I have to turn it on mid-show sometimes so it doesn't run outta air. We really need a bigger one that's quieter 😅
W
Sicko mode
Can you tell my what cylinders do you recommend or programs for them
Here's the cylinders I recommend: www.amazon.com/Tailonz-Pneumaitc-Cylinder-Connector-MAL25x150/dp/B082FXPCKD/ref=sr_1_3?crid=LCU6L6NV9P70&keywords=pneumatic+cylinders&qid=1668029443&sprefix=pneumatic+cylinders%2Caps%2C126&sr=8-3 They are the same ones that I use.
As far as the programs, I got a MicroBlue24 from DSFRobots, but if you want one for cheap, I recommend using an Arduino and Relays that run on a free software called Vixen Lights. There should be tutorials on RUclips showing how to set that stuff up.
@@Sea_of_Waves so are the cylinders airlines connected to a controller and then the controler to the air compressor?
@@creaturesaurus9926 So the controller, plugged into a wall outlet, has this green thing called a screw terminal that you have a bunch of wires connecting to. Those wires from the screw terminal connect to the solenoid valves, and the valve's manifold is what you hook up the air compressor to. Then you have a thing of tubing that connects from the valves all the way into the slots on the cylinder. Pushing the button on the valve activates the cylinder as long as it is held down, but the controller does the button pushing for you so you can have all these movements going on at once.
@@Sea_of_Waves so its expensive to set all of this up it sounds well thanks for your time and help i am a new subscriber of yours
@@creaturesaurus9926 No problem! Yeah, it really is a lot of money. Only reason I was able to pull it off is because I had a job over the summer