John Stecz..... The V16 was Never available for use in Hwy trucks. This V16 (Series 92) was installed by the owner. MacMillan/Bloedell up in BC, Canada had Six Custom built, tandem steer Freightliner COE's built at the factory with V16's (Detroits) and HD Allison Transmissions for hauling "sticks" (logs) on "trains" (3 & 4 trailers), from the mountains to their pulp and paper mills, back in the mid/late 1970's. Gross weights were in the 450K+ range.
I love the lope of a Detroit at idle whose rack needs just a little tweak -- and in a double bunk 352. (Love the V903 or KT series too) ** On a side note, my father was a ham radio operator in the Army Security Agency during the Korean Conflict. At home he had a base radio and antenna set up and could talk to folks in other countries. He never understood antenna at an angle.
Man, I'd hate to see the fuel bill for that thang! She sounds good tho😁 What she get 2-4 mpg? And I'm not hating......it was a Silver 8V92 in a KW K100E that made me fall hard for the two strokers.
If it's naturally aspirated with N60 injectors and governed at 2100 rpm, then it will be 560hp and ~1700ftlb. An 8V71 to the same spec is 280hp and 850ftlb. A lot of people call every 8V71 a 318hp but most weren't because they weren't set for 2300rpm and they didn't all have N75 injectors
@@frontagulus Sorry Sir but an 8V71 with n60 injectors is 290hp and and a 318 is N65 injectors which was their most common rating. 75 mm injectors are for the 8V71Ts
I love diesels and I'm going to take heat for this,I can't stand the 2 stroke sound...it sounds unnatural,I can listen to a Cummins,powerstroke, Duramax,cat 366,any euro diesel hammer away all day.i drove a Cummins swapped 72 f250 for a whole year with no radio and loved it.but that 2 stroke sound is awful....
If they are so terrible why did the have 50+ years of success with the 2 stroke 🤣 just because you don't like them don't mean they were bad for the time.
1136 cubic inches of barking 2 stroke.
Turning fuel into music as us old timers say
Without a bunch of smoke ---
I'd bobtail around the country in that.
Ikr
Holy crap! Hands down best of the best sounding of all time!
Peterbilt 352 " the pacemaker". Sounding like a beast.
V16 Detroit love it
If the driving public actually knew what they were seeing. Beautiful work guys.
I had an 1980 352H with a 3408, miss that ol'girl 😢
Is that a v8 cat? I heard they ran those in some monfort trucks
Never be late V-8.
What satisfaction it must be for the mechanic and the old girl to come to life again
Very cool! Would love to see er pulling a grade w that extra V8! Thx fer showing us
Miss seeing those old Cab Overs on the road. Good times!🤘🏻🤘🏻
Now THAT is a sound
That is awesome please post a cab ride
Very cool sound, love it! Greetings from Germany👍
Love those old Detroit's
The tiltin hilton....
She’s a beaut Clark 🤟🤟
Chevy chase?
Shi**ters full !
Wow what an amazing engine you got in there , a true inspiration
Powerful Sound 🦾
That is one Awesome truck
Awesome seen this video years ago somewhere
Hope I can get some more once he gets it unburied out of the shop next summer
Sounds amazing! Almost muscle car note! Thanks for sharing
Love to burn diesel sounds good looks great awesome badass♥️👍🇺🇲🇺🇲🇺🇲💯👌♥️👍👌✌🇺🇲
Please give us a pov video inside going for a ride with the Pete 16v!!
Operated White Frietliners cab overs in the 1970's in Canada but never new there were 16-s built wow! can just imagine the power. Thanks for posting.
There is nothing that sounds better than a screaming two stroke Detroit
I always dream to drive such a truck for days...❤ greetings for old guy from sri lanka 🇱🇰
My friend had one with a V 12. But did not know you could get 16 cylinder. Nice
Two 8V’s combined
John Stecz..... The V16 was Never available for use in Hwy trucks. This V16 (Series 92) was installed by the owner. MacMillan/Bloedell up in BC, Canada had Six Custom built, tandem steer Freightliner COE's built at the factory with V16's (Detroits) and HD Allison Transmissions for hauling "sticks" (logs) on "trains" (3 & 4 trailers), from the mountains to their pulp and paper mills, back in the mid/late 1970's. Gross weights were in the 450K+ range.
This truck is used to pull continents back together after an earthquake!
Hey was that “Pete” parked in tha’ weeds on tha’ curve jus’southa’ Everson, WA. Years ago?
Yes
Getting the same fuel economy as a yacht haha, but to hell with it that sounds good.
Those stacks look absolutely stupid
Hell yeah
Music to my ears
Very kool 😊
Detroit music
That's one of the coolest trucks I've ever seen.
The engine idling sounds like a jake break itself
Now there's something I could sleep to!
Did these trucks come with a v16 as an option?
No
That dd will spin fast enough to run that truck 120. lol
They still redline at 2100 RPM, they just sound way faster.
@@oldrustycars those engines will turn closer to 2500, maybe more
@@oldrustycarsRedline at 2700 most were set at 2400.
Heh heh, love the 16V's. They sound like a straight 8 Buick on steroids!🤣🤣👍👍👍👍
AMERICA!!
Awesome fuel consumption.
Awesome sound
I love the lope of a Detroit at idle whose rack needs just a little tweak -- and in a double bunk 352. (Love the V903 or KT series too)
** On a side note, my father was a ham radio operator in the Army Security Agency during the Korean Conflict. At home he had a base radio and antenna set up and could talk to folks in other countries.
He never understood antenna at an angle.
Well its sort of a "Cool" look but also when you lean them forward a lot of them bend upright almost perfect at highway speeds
2stroke?
16 ,, idles so smooth
One sweet sounding money into noise converters I have ever heard.
I would love to bobtail around the Country in this.
Nothing sounds like a Detroit.
Like to hear more of that big yamahammer
GREAT 16V 71 DETROIT 1136 CID.
What a Monster ! So Cool 😎
How many miles to the gallon that mf gettin?
Mean looking cabover 👍🏼
This is a 2 stroke right? All 71 series are 2 strokes.
The Dodge 426 HEMI cuda of trucks
Plymouth made the Cuda.
Love the sound of a Detroit
Sounds good, never seen a V 16 in one
👍🤤
Impressive indeed.
A beast!!💪💪💪💪
Sweet
Beautiful Mech man
That’s impressive
Not so sure 700hp I run an ex military volvo fl12 8x8 with a mtu v10 twin turbo with zf 16 speed she gets down with 1495hp.
What kind of fuel mileage does this beast get.?
Not much 🤣
The words Detroit Diesel and CARB are by nature a contradictions of terms.
When i got a new frtlnr with a baby detroit.DD1… thought how nice it was to not hear a Silver 92 ever again.. nice fer a few seconds now tho.🙂
Them ain't straight pipes,look at the curvatures. It does, however, sound real nice,as does the conventional
Man, I'd hate to see the fuel bill for that thang! She sounds good tho😁
What she get 2-4 mpg? And I'm not hating......it was a Silver 8V92 in a KW K100E that made me fall hard for the two strokers.
Not sure what he gets
- So how many miles per gallon we talkin?
- None
D60 and I thought I was pimpin' in town!
Do you have a video that actually shows the engine?
A real truck hauling real trucks. 😃
Was that a factory engine option for this rig?
Cool
Got Jakes?
Yes it does
Thanks for the memories.
Music to my ears😊
Wow! Rare beast
Must get awfully toasty in the cab... sounds great though
No reason it would over any other motor.
16v71 suggests it doesn’t have a turbo
They came both ways
Glorious 😎
Sure 700horse but only 1600tq
"Only" 1600? For those of us that have driven with 800ftlb, 1700 would be awesome.
Dang son
Original transmission or an upgrade on it ?
Super 10
What diameter stacks are those?
I think 10. Not sure. Big 🤣
Ridiculous
Imagine the torque, could probably idle up a 20% slope with a full load
No. Not really. A c15 475 makes more torque. Old v engines great HP but shity torque
If it's naturally aspirated with N60 injectors and governed at 2100 rpm, then it will be 560hp and ~1700ftlb. An 8V71 to the same spec is 280hp and 850ftlb. A lot of people call every 8V71 a 318hp but most weren't because they weren't set for 2300rpm and they didn't all have N75 injectors
@@frontagulus Sorry Sir but an 8V71 with n60 injectors is 290hp and and a 318 is N65 injectors which was their most common rating. 75 mm injectors are for the 8V71Ts
Beautiful!
Sounds like a cummins, powerstroke, and duramax mixed together
Sounds like a Ford Coyote engine
With all do respect. Are sure you put the number right? Looks long enough for 12v71 but does not look long enough for a 16v 71. I mean no disrespect
Last time I checked a v16 was alot shorter then a 110" peterbilt cabover......
I love diesels and I'm going to take heat for this,I can't stand the 2 stroke sound...it sounds unnatural,I can listen to a Cummins,powerstroke, Duramax,cat 366,any euro diesel hammer away all day.i drove a Cummins swapped 72 f250 for a whole year with no radio and loved it.but that 2 stroke sound is awful....
Yet you are watching and commenting on Detroit videos 🤣🤣
Sounds terrible…should of had a V8 cat!
Who let you on mommy's computer without supervision
@@jdm65kw89 those detroits are terrible, ten minutes in that truck with that engine screaming and you’ll be looking for a cliff to drive off!
6 months with a v-8 cat and you’ll be looking for a bank to rob 😂🤣
@@heavyhaul8621 that’s great! right on point!
If they are so terrible why did the have 50+ years of success with the 2 stroke 🤣 just because you don't like them don't mean they were bad for the time.
I know where that was filmed I live in ferndale wa. Those are all awesome rigs
Thing sounds sweet. Complete with shutterstat radiator opening. Probably pull stumps with that puppy. Beautiful!!