DJI Mavic Air (1st-Gen) Arm Replacement Guide
HTML-код
- Опубликовано: 21 авг 2024
- Did you crash your Mavic Air? Snap an arm and a motor? No problem, replacements are easy! I'll show you how to disassemble and solder a new motor and arm on to the original Mavic Air from DJI. Links to tools below:
I am not responsible for damage or data loss caused by you to your device, this is not a guide for beginners and reasonable safety precautions should be followed. Attempt this repair at your own risk.
Parts sourced from eBay, original Mavic Air parts are very difficult to find.
Tools:
Technik Tweezers (Almost the only kind I'd recommend)
amzn.to/3KPS6EB (out of stock? look below)
Hakko Tweezers (Made to last!)
amzn.to/3wRk6mI
Precision Screwdriver Set w/ Security Torx for consoles/phones
amzn.to/33SEPuV
Get my silicone work mat here:
amzn.to/3Cr7ofO
Curved Pry Tool (for separating adhesive):
www.mobilesent...
Need something else? Leave a comment below with what tools you're looking for and I might just have a recommendation for you!
(Some links such as Amazon are affiliate links which support the channel, see the channel's About page for more information regarding affiliate links)
------------
Social Media:
Instagram: @TapticDigital
TikTok: @TapticDigital
Twitter: @TapticD
------------
Music licensed by Sonata Media
Thank you! I followed your guide to fix my broken arm and this was exactly what I needed! I do have one small correction: At 1:01, you say that the 10 Philips screws are identical, but mine didn't appear to be. They were identical lengths, but four of them were of a finer thread. Thanks again! :D
ENCOURAGEMENT!
Epic repair! Well done 😄
Excellent video. Appreciate it. Is replacing a left front arm basically the same because I see the arm has 4 wires. instead of three.
Almost identical, it just has an extra wire for the antennas in the feet for the front arms
Hi. What kind of silicone adhesive youre using?
Thanks
I used B7000, it's rigid enough to old but flexible enough that the vibration of the drone doesn't affect it much.
how u doing?~ that is splendid view~Taptic- 😇
Thank you!
Hi I changed the knuckle on the back leg but when put all back together it's says...ECS status error contact dji ?
ESC error? It's likely an issue with the wiring of the motor, could be wrong spots, loose wire, or damaged
Double checked and re done soldering but still same issue 😪
@@johnozzy2 hmm could also be just a defective motor, or if the motor is some how jammed
Hello, how do you test the mavic air without making it fly? Thank you.
I don't, I always fly a drone after a repair. Just because it spins doesn't mean it's working properly, so I always bring them outside for a quick flight or two.
What if the main board and the camera board is missing ?
If those two parts are missing it’s 1) not going to fly and 2) not going to have a working camera.
@@TapticDigital oh ok, do you know where I can buy these parts?
@@Shadowboy172t3 unfortunately with the older Mavics the only place I’ve had any luck has been eBay and AliExpress
@@TapticDigital oh ok thank you
Where can I order a rear replacement arm
Unfortunately eBay is still the best option for replacement parts
Would you be able to fix mine? Broke the front arms of my first gen air
I don't offer mail-in repairs just yet, currently I'd recommend Drone Nerds for repairs, though I am open to suggestions if anybody else knows a better option.
Ok thank you