DJI Mavic Air Arm Replacement / Repair
HTML-код
- Опубликовано: 1 июн 2019
- Want me to personally repair your drone fill out a repair ticket today www.dronezonenj.com/dronerepairs
Replacement Legs :
Front Leg - www.banggood.com/Original-Fro...
Back Leg
www.banggood.com/Original-Rea...
Silicon Work Matt :
- www.amazon.com/Kaisi-Solderin...
Social Media
- Instagram
Thank you for taking the time to film, edit and post this. I'm back in the air thanks to you.
Thank you for the help I was able to replace the back left arm on my Mavic air after watching your video. I have never flown a drone and my boss brought one to work because he wants us to inspect the roofs at our job site. Yay for me! Someone at the office broke it before he could bring it out to me. Thankfully your video was here so that I could get it back up and running in no time. Thanks again.
Thank you so much for this amazing and so detailed tut video. Saved me hundreds bucks!
Had to replace front and back arm. Video was excellent. The first two screws were so filled with glue they looked flat. I managed to get it all back together thanks to you. I spun up the drone in the garage and it had lights and all 4 props had power. Will do a test flight in a few days. Thank you, thank you!
Great video! Helped me get my front arm replaced on my Mavic Air after a aftermarket propeller failure knocked it out of the sky. Now I have to try and find some OEM props so I can test out the repair.
Thanks for posting this detailed video. Today I did my repairs and dry tests. Tomorrow hopefully back in the air.
Thanks for the video. I was only using it to get the main board out to replace the IMU, but it was perfect to figure out how to open up, which cables to remove and where the screws are! Thank you.
Thanks for sharing this video. I had a crash and broke two arms. With this video I replaced them very easily. Thanks again.
Thanks for this Video. My Drone is flying again!
Excellent video. Covered everything without making the video 1 hour long. Thanks
Want to drop you a note to say thank you for such a comprehensive and detailed video. It was close to perfect and helped me repair my two damaged front legs on my Air. One detail that I didn't see in the video, and is probably is a no brainer, but I almost missed it was the washer that seats in the top of the arm bracket. Again, Thank you for a super awesome video that really saved the day (and a huge repair bill)!!
Glad I could help man! Happy to hear you got your drone back in the air. Happy flying
Thanks so much for the video. I'm flying once again!!!
Thank you, very clear and concise!
Life saver, thank you very much, a highly necessary video
Thank you so much for the video! helped a lot.
Thanks for the video, it was very helpful. I got mine flying again after watching this. The only minor difference, I lifted up the ESC board to hide the slack on the LED wires.
Yeah i did that too!
thanks for sharing this amazing skills... you saved me a lot... time to back in the air
Thanks for this tutorial!
Thank you so much . Very informative video
Drone #505 has been repaired thanks to this video.
Amazing Job bro thanks for help us to fix our drone
Thanks You!!!
Hi man, I had an accident with my Mavic Air, I'm waiting for the front motor arm, so I flew by my house and the spacecraft slipped to the right, then I did the calibration that went wrong. before. Channel success.
Thanks for your help....I fixed my Mavic Air after it crashed into 3 feet of water
Much appreciated for this vid. Only thing I'd say is tell everyone to keep their screws arranged at the start of the video. Top man though
Excellent video. I’d hug you right now. No homo. Gold bracket installed backwards though bro! Ha!
Good video hopefully I wont ever need to do it but just in case
Good I like
amazing video. Thank you, bro.
PS You put golden plate upside down while assembling the unit
A smaller solder tip would help.. BTW do you know if the front landing leg can be replaced w/o replacing entire arm.?
Can you please make a video for the Mavic Air how to remove and replace the Flexible Gimbal Flat Ribbon Flex Cable. Thanks
I tore mine down to dry the circuits out real good after it went to the bottom of my lake. Only problem I had, must of been a flaw, is that while un connecting the antenna wire, it pulled the connector right off the board on one antenna. All was good, I soldered it to the mother board instead. I have repaired hundreds of phones, so I have specialized equipment on hand. Even my camera had a few drops of water floating around in it. I did like I do with phones, put all the circuit boards in the oven at the lowest setting 170degrees for 30 mins. I put the whole drone in there at first to dry it out, no problems, propellers and all.lol
So if u match the color wires it will spin the right way.. no going back and switching wires?
Crashed my air in to a gate at full speed, broke rear and front opposite arms. This guide was superb thankyou. She’s flying again! Man I love liquid electrical tape, it hides my god awful soldering efforts.
Thanks for shout ! Glad this helped you get back in the air !
After a little fall my mavic air when i fold it the front and back arms are little touch each other is that fixable?
Did this repair to replace the rear right arm. Now im getting ESC errors on 3 and 4. I could understand one of them being rom me screwing up the repair, but im perplexed how it could be both. Any ideas on what I could've done wrong?
Thanks for the video btw, IV never soldered before but I have a steady hand and have removed the motor arm, there is still almost all the old solder still on the board do I really need to add more ?
Its not 100% necessary but i highly recommend it to avoid cold solder joints
If the motor runs, used gorilla glue gel , only on areas that broke up Hold 15 sec, let set for a day.
My mavic air I've only got 2.5hours flight and a motor failed its under warranty but really annoyed about it as not once have I crashed it or anything bad I totally look after it
Which Torx size You use to unscrew rear arms? THX!! I tried T8 as I read it in forum, but was too big.
hello, do you know where i can find a new fc for my mavic air?
Which type iPex connector for the rf to board?
Hi. Thank you for this video. I have a question, what are those little screws used to fix the arms on the exterior, on the plastic, that you have to put off before the solder? Is that torx? And which, T1, T2 ? Thks
Any idea on the size of these yet?
What little knife looking pry tool is that?
Hi,
My motor have a sand.
How disassembled it.
My problem is the magnetic cup
il colore militare e adesivo o scocche in plastica e dove le hai comprate? grazie
Hi, I recently purchased a Mavic Air 3, but unfortunately, it was involved in an accident within the first 24 hours. The drone was attempted to be flown by friend and crashed into a bus. Fortunately, the camera is undamaged, but the opposite side of camera body is severely crushed. I'm wondering if there's any possibility of repairing it ??
After completing my arm replacement, thanks to you, btw, am getting error msgs 200 and 202. So frustrating!
Kinda kidding, but is there a "check engine" light equivalent that needs reset maybe?
Any help is appreciated. No other resource really but you!!
Download DJI Assistant 2 On your PC or Mac you can reset your drone to factory settings clearing Most software bugs. May fix your issue as long as your ESC's are not damaged and your soldering is done correctly. Hope this helps!
It's the black bracket and when it does push in it's not lined up
I don't remember how the SD door came out haha.. how do I mount sdcard door hehe
Hi. Have a question, how I can check if GPS is ok or not ?
Dji quoted me $166 for 2 front arm and GPS module replacement. I have watched this video, checked the pricing of the parts needed and....decided to pay them to do it. I’m just little worried to mess this up.
Thoughts on glueing a broken arm back together? Is it a horrible idea? If not, any recommendations on what glue to use?
Seth McClaine I would definitely not, maybe a last resort? I did this and my Mavic fell from 370 feet. I think a gust of wind blew it and then it tried to compensate and it was too much force on the arm and it broke. It was in about 9 prices and I never found the battery. I would say just try and fix it the right way.
Seth McClaine if you are going to glue it, use bob smith industries super glue and accelerator. Works great. Extremely strong glue.
Excellent #Like301 joined the channel TTYS God bless
Hi, any suggestions as to where I can get replacement arms for a Mavic Air in the UK?
Ali express
You put the copper rear bracket in upside down.
My rear arm popped off in a crash. Yours seems to just wiggle on, my won't go on. Even with the hex screws out. Any one know why?
FUCK ME, AT LAST!!! FAIR PLAY TO YOU DRONE ZONE :)
DBM. ENGLAND.
What soldering iron do you need for this repair. I tried but seems my iron isn't good enough 🤔
i recommend Hakko FX888D Digital Soldering Station
yeah, I crashed too!
Can you tell me the name of the silver screwdriver you are using please
Hi Mark the Silver screw driver im using is a 1.5mm Hex Driver a 1.5mm allen key will work the driver is just easier to get more torque
@@dronezonenj3038 thanks mate, I just ended up getting the screws out, and the video was vital in my success never soldered you made it look easy 😂 my hand was shaking like a drug addict but I managed to pull it off 😄 thanks mate you saved me 145 pounds
The newer models don't have screws in the gimbal area any longer it seems, at least mine doesn't
what are they? rivits?
@@madmike_9343 there simply were no cover screws at the gimbal if I remember correctly.
Couldn’t you just superglue the arm back together?🤔
13:45, the copper plate was upside down.
doesn't matter as it only holds ribbon cables in place. Still doing its job
My mavic air just fell out of the sky at 100m altitude and crashed into my roof.
I can't put my bracket back on my arm I tried everything and I even try to put the old ono back on
Hey if which one are you referring to? the one that goes in the arm that makes it move
@@dronezonenj3038 yes I broke the bottom white one trying to get it back out so I just ordered two new ones
@@dronezonenj3038 I took them both out no problem just putting them back in
@@dronezonenj3038 taking it apart and putting it back together is no problem and a soldering it's just this arm I'm having problems with lol
@@dronezonenj3038 I forgot what it's called the shaft or the bracket but it's a front left arm
you place the gold plate wrong position
I noticed that as well. It was upside down.
Mistake at min 13:49
impossible, it's a mess, i prefer to pay to get it repair to be honest
Not impossible if you know what your doing
@@dronezonenj3038 For an average person, this is beyond.
"If you are inexperienced at soldering I wouldn't recommend this repair" he says when the drone's already mostly disassembled :)
All that fuss just to replace an arm? What a shitty design DJI has.