Hey at the begging it worked then once I started mfs2020 and while it was loading a message appeared saying “there is already an instance of plug-in running” do you have some help idk guys maybe did it already happen to you guys? Thanks….
Thank you! Was struggling to get my Switch panel going but works now! I downloaded the Switch drivers but it didn't seem to work, so I downloaded the multi-panel one too, then restarted the computer. All worked then
Having switched from X Plane 11 to MSFS 2020, I need to update my Logitech drivers exactly as explained in this great video. My question is: Should I unplug the USB of my Logitech devices before doing the update? Thank you.
My question can you connect the Logitech panels directly to the USB ports in the G pro flight yoke assembly, there a three USB ports available on flight yoke assembly. Thanks for the video. Happy flying.👍✈️
Thanks for the vid. Just got a new PC and everything was working except my switch panel. Love these flight components and love the graphics on my new setup. Really enjoy your content.
SU5 has killed my Saitek radio :-( Reinstalled software, tried the USB power management fix, then did a complete Windows reinstallation to start over, nothing, doesn't work at all. If I run the Logitech test software the panel lights up and cycles through all the various modes so I know the panel itself is fine. I'm pulling my hair out, anyone else having the same issue?
So everything works with this on MSFS 2020 except for one thing. The elevator trim starts out at 13%, and only moves a couple of degrees either direction no matter how long you turn the trim knob, and then automatically resets itself to 13%. Is there a fix for this?
Hello, I have the multipanel, it shows connected and the panel turns on the HDG lights, but it doesn't work on when selecting the heading, or altitude, no number shows up, neither when trying to configure the buttons 😢 I have the TCA Captain pack, but wanted to have the autopilot panel working, don't know what to do, could you help me out?
Good video but what if you want to change the default bindings. I have the default bindings working but these L/S controllers do not show in the MSFS2020 controls panel. ?
At the time of MSFS launch these drivers weren’t available so I sent an email to Logitech asking them and I must say they weren’t very helpful, after some browsing I discovered Spad.Next drivers and I’m delighted with them. Works with all saitek/Logitech hardware. Thanks for the video buddy. 👍🏻
Yep, Logitech drivers didn't work by me, but the spad.next worked directly as expected. There are a lots to setup, but once it's done, you don't have to touch your profile afterwards. But yes it's a shame to buy again this as Logitech should provide it for free, and their support is crab... Thank you again for the link, it was usefull.
I don’t have them so I can’t really help you out, however I do know this driver should work with them, maybe check power management settings for them, that’s always a good place to start!
Hey. I am very new to MSFS 2020. (two days) Being an X-plane user for years. So in MSFS I downloaded the Saitek plugin. My panels are working correctly. The only thing is my Saitek Yoke. I can not steer on the ground and I do not have rudder pedals. How do I get MSFS to recognize I do not have rudder pedals and want to steer on the ground with the yoke? Thanks
Not sure if it’s just my computer, but I downloaded the driver, and none of the instruments are working while the switch panels do; I tried manually opening the driver and it said it was already running. Any suggestions?
after a long time away from the sim, I am rebuilding and reinstalling. I can find the logitech hardware suppor page and the download link for multi panel and switch panel etc. but when I click the link I get this: Select Operating System to show Downloads. There are no Downloads for Operating Systems not listed. But there are no OS listed - is there somewhere else I can get the software? Help please - Or does my Win 11 mess things up? There seem to be no newer entries on the msfs forum
Hello, I make two SIMPLE queries about the LOGITECH MULTI PANEL (I want to find it to use in an Airbus A320neo in FS2020): - When you change the ALT on the multi panel, it ok on the A320 sim? or how do you interpret the push of the knob? (In the virtual cockpit of the simulator, once you entered the new ALT, one must press the knob (push) to activate. THIS, can it be replicated in the multi panel? - When you start the sim in a parking lot, does it start on? or can it only be used if you start on a track? THANKS.
Patch nearly works - everything but screen vison [Autopilot] Screen vison on radios etc - but now the controls don't work like yolk no sensitivity available!! Do I kick it? Best Peter
Thanks for posting about this. I have a few of the instrument panels and radio panels still sitting in boxes because I was content to wait for first party support rather than buy a third party program to make work what should work on its own. The radio and instrument panels seem to work as expected, with the caveat that the ADF function of the radio panel seems a bit goofy and the 2 decimal place COM radios don't match the three decimal places in the sim cockpits. It's not a huge deal but would be nice if they were matched. For the instrument panel, all of the displays seem to work as expected, though I'm not sure what the intended function of the left side buttons with labels is supposed to be. None of them seem to do anything, but I never used the instrument panels in any sim previously so not sure what is to be expected. Anyway, thanks a lot for pointing out that Logitech finally released something to get these devices working. They seem to have done it rather quietly.
My Logitech switch panel is not working. Where is the main driver for the flight switch panel, In device manager Saitek bulk interface there is no driver installed. So where do I find the driver. If anyone can help to get this working?
Hi, I am using the Alpha yoke which many of the function of the start up, lights ext are pre-mapped already, how could I use both the Alpha yoke and Seitech panel without a conflict? Thanks
Hello, thanks for the vid. Does the TRIMM WHEEL function also work? I heard the Saitek Trimm wheel device doesn't...or isn't supported? Any news about that? Thx for the effort you put into this.
Yeah this trim wheel on the panel works very well in all aircraft I’ve tested so far, sorry for cutting it out in this video! But I don’t believe the old SAITEK one is supported yet, Thanks for watching ✈️
I do have FSX not MFS X I made a mistake when I stated it was MFS X. I really don't see the difference as they are both the same. Anyway, I am still not able to get my switch panel to work. Nothing lights up or operates and I followed all the directions that you have on this video. Hope you or someone can help me get this beast working.
Thanks you so much for the fix. However, after downloading the recent update (1.10.7.0), all my panels have stopped working. I just can't get them to work. Do you have any ideas?
I don't see the Logitech plug in. I've searched for hours and have tried downloading several times. I've tried restarting my pc, and launching MSFS. The flight switch is still dark. I don't know what I'm missing. Yes, it's plugged in. Asking here is my last resort. Thanks...
I was using the Logitech nav panel, doing ILS approaches. I managed to get the Cessna 182 to follow the route and pick up the ILS to land but just before auto landing perfectly ... I lose all joystick controls, brakes camera views and have no way of stopping the landed aircraft.. Is this a bug on mfs2020 or am I missing something. Also my new panel the knob is working loose on the right hand main rotary knob is this a common problem?
I have been going in circles as to getting the plug-in for the Saitek products to use with the MSFS2020. I have used the links given by you and others and it takes me to different pages and not able to download the plug-in. Please help, I bought the pro flight multi panel (auto pilot), the switch panel and the yoke system. All Saitek Logitech. Appreciate any help that anybody can provide!!
Great video. Thanks. I wonder how can I see the Multi panel on the controls options. The panel is somehow working and its imputs are recognize during a flight. However, I cannot see the device next to my other controllers. I cannot map it. Is this normal?
Thanks for this video, I have been plying with the Yoke and panels for a while, they worked perfectly in the Cessna 172 and other small general aviation aircraft. However, whenever I tried a turboprop like the TBM 980 weird things would happen loke raising the landing gear would turn off everything in the cockpit. I downloaded the drivers and they worked fine. I can't believe I forgot to install the drivers when I bought my panels a while ago lol.
when using the supplied driver for these panels, im finding alot of my switches dont actually do anything, but spad makes them function, but at the same time, the radio and ap panels are flickering when i move the dials. moving the dial makes the ap turn off, the readings go to 000 untill i move the dial a little more then all goes to normal
Thanks for the tips, after installing the patch all the control panels now work. However, the Pro Flight Instrument Panel just doesn't seem to display anything, no matter what I do. Any suggestions?
My FIP panels still dont work with the patch, I have 10 of them, all other peripherals work (radio multipanel an switch panel etc),can you or anyone help
Thanks for amazing video but I’ve some problems with my panels. Its not working when start cold and dark on flight simulator. But if I start runway point its working properly. But I want to start cold and dark at the gate. When I switch battery on electrics are coming and lights on but auto pilot panel not ready for using. Why happening this could you help me?
Hi, I believe this is a common problem but I’m not too sure! If you start at the gate, to use autopilot make sure you’ve got master avionics on regardless of the plane, I know some don’t have it but you’ve got to turn it on to use the autopilot aside from that you can’t actually turn on the AP until your close to the flight plan, so that may be why,
Hi bud good video Done my multi panel Flaps work and auto throttle but got no numbers on the screen and can’t adjust alt etc also ap buttons not responding
Yeah I believe that’s a power management error, I had the same problem with FSX, just search up Logitech panel power management tutorial and it should help you!
I downloaded the plug-in last night ,17-9-20 . Only one problem. It auto installs on to the C drive. There is no option to alter the install path. Now, this is fine if your MFS 2020 is on the C drive. Mine is on a separate M.2 NVME drive . I have located the folder on the C drive. Does anyone know where on the Microsoft flight sim the plug in folder should go? It works fine with XPlane 11 , but that’s on my C drive. Any help much appreciated. I have installed the patch for the Microsoft Sim all 13.5 Gb of it. It would be be nice to get the switch panel working .
One more clarification: the problem with the gauges in fsx was that they all could only be plugged into USB 2.0 cables/sockets. Did you have that limitation with the panels?
Most people might use such panel on a USB Hub. If you do that for sure you got to install the driver but also have to mention the power supply. If there are several devices on such port you need a external power device. After I supply the hub with external power all runs pretty well
I had this same issue when installing it with FSX, I believe it’s a power management problem so just search up ‘Logitech panel power management’ and a tutorial should come up!
Pilot Studd Hey I did the power management and it still isn’t working so I might return it. The letter and stuff come up randomly but won’t come up when I play MSFS 2020
Question: Once you download the drivers for a panel and then you add another different panel do you have to run the drivers again or just plug in the added panel and it will work???
I did what what you stated on this video, I was able to download the drivers for my switch controller as you show on the video, but could not get panel to work. I am using Microsoft Flight simulator X. I did retry rebooting but did no good. I am showing the controller as being installed on my computer. when I go to the settings on my computer Windows 7 computer. Can anyone help??? Thanks!
For some reason using the Logitech drivers causes the sim to jitter and lag. Same thing happened with SPAD so not sure if this is a connectivity issue all round with the panels and the sim!! Soon as I close Logitech the sim returns to normal.
I haven’t heard of this problem before so it’s new to me, could be cpu usage if you’ve got a weak cpu but I doubt you have. Let me know if you find a solution!
Was a sim connect with MSFS issue it has been corrected in the last patch. Anything connecting to it prior to the last patch was killing frame rates even on powerful machines.
I tried downloading this and I still can’t get nothing to work. How do you get the Logitech icon on your computer. The only thing that has worked for me is the liveries I added. I have tried to load the 32NX mod and it isn’t even showing on my airplane list. I don’t know what I’m doing wrong.
As a 40 year old noob and my first flight sim as I only got it recently and have a business so capital isn’t an issue I’ve been investing in gear. Bought this today and have to wait a few weeks but a superb video and I look for forward to learning. Thanks buddy. Subbed and liked
Cheers my fellow simmer, i am so glad they have finally pulled their fingers out and given us the Drivers at last.
Happy Flying
Have a great time in the skies!
*sort of.
Hey at the begging it worked then once I started mfs2020 and while it was loading a message appeared saying “there is already an instance of plug-in running” do you have some help idk guys maybe did it already happen to you guys? Thanks….
3 years old video but still valuable. Good stuff mate. keep it up.
I want you to know that i tried installing pilot panel again and i got it to work. I installed plugin and then rebooted pc. Now it works!!
Where can I get the plug in. Have been all over and can’t find it. Please help. Thank you in advanced.
Thank you! Was struggling to get my Switch panel going but works now! I downloaded the Switch drivers but it didn't seem to work, so I downloaded the multi-panel one too, then restarted the computer. All worked then
Having switched from X Plane 11 to MSFS 2020, I need to update my Logitech drivers exactly as explained in this great video. My question is: Should I unplug the USB of my Logitech devices before doing the update? Thank you.
My question can you connect the Logitech panels directly to the USB ports in the G pro flight yoke assembly, there a three USB ports available on flight yoke assembly. Thanks for the video. Happy flying.👍✈️
Thanks for the vid. Just got a new PC and everything was working except my switch panel. Love these flight components and love the graphics on my new setup. Really enjoy your content.
SU5 has killed my Saitek radio :-( Reinstalled software, tried the USB power management fix, then did a complete Windows reinstallation to start over, nothing, doesn't work at all. If I run the Logitech test software the panel lights up and cycles through all the various modes so I know the panel itself is fine. I'm pulling my hair out, anyone else having the same issue?
I have a saitek panel that was made before Logitech took over. I’m having trouble getting this setup, kinda frustrated
Does it work with windows 10 pro?
So everything works with this on MSFS 2020 except for one thing. The elevator trim starts out at 13%, and only moves a couple of degrees either direction no matter how long you turn the trim knob, and then automatically resets itself to 13%. Is there a fix for this?
Hello, I have the multipanel, it shows connected and the panel turns on the HDG lights, but it doesn't work on when selecting the heading, or altitude, no number shows up, neither when trying to configure the buttons 😢 I have the TCA Captain pack, but wanted to have the autopilot panel working, don't know what to do, could you help me out?
Did you try them on Carenado´s Mooney M20R? Do these work?
Good video but what if you want to change the default bindings. I have the default bindings working but these L/S controllers do not show in the MSFS2020 controls panel. ?
Thinks for the tip but how to change the keys of the mcp And pro flight switch panel please? Only the Yoke on fs 2020… 🙏🏻thinks
At the time of MSFS launch these drivers weren’t available so I sent an email to Logitech asking them and I must say they weren’t very helpful, after some browsing I discovered Spad.Next drivers and I’m delighted with them. Works with all saitek/Logitech hardware. Thanks for the video buddy. 👍🏻
What a shill in a last gasp to sell people something they can get for free.
Yep, Logitech drivers didn't work by me, but the spad.next worked directly as expected.
There are a lots to setup, but once it's done, you don't have to touch your profile afterwards.
But yes it's a shame to buy again this as Logitech should provide it for free, and their support is crab...
Thank you again for the link, it was usefull.
What about those little square instrument panels? Mine aren't working but everything else does
I don’t have them so I can’t really help you out, however I do know this driver should work with them, maybe check power management settings for them, that’s always a good place to start!
Same here. Hopefully it's a known issue and they're working on a fix!
Hey. I am very new to MSFS 2020. (two days) Being an X-plane user for years. So in MSFS I downloaded the Saitek plugin. My panels are working correctly. The only thing is my Saitek Yoke. I can not steer on the ground and I do not have rudder pedals. How do I get MSFS to recognize I do not have rudder pedals and want to steer on the ground with the yoke? Thanks
Great thanks….how do you change any of the button mapping functions? I can’t see the Logitech panels in the MsFs control setting menu ….?
same and looking for solution
I was waiting for this! Thanks mate! 😁
It’s amazingly easy!
@@PilotStudd Yeah it is! Thanks again 🙂
Installed driver. No lights come up on Switch Panel and not see under controls in MSFS. Any ideas?
can you change the button assignments? Love to have so many buttons but they are assigned to lights, which is not that useful to me. Thanks!
Downloads ARE on the download page next to a very unassuming down arrow to the right of the options. Not dead obvious.
Not sure if it’s just my computer, but I downloaded the driver, and none of the instruments are working while the switch panels do; I tried manually opening the driver and it said it was already running. Any suggestions?
after a long time away from the sim, I am rebuilding and reinstalling. I can find the logitech hardware suppor page and the download link for multi panel and switch panel etc. but when I click the link I get this:
Select Operating System to show Downloads.
There are no Downloads for Operating Systems not listed.
But there are no OS listed - is there somewhere else I can get the software? Help please - Or does my Win 11 mess things up? There seem to be no newer entries on the msfs forum
do you knoiw where to get screws to join them together from
Does the switch panel only work with microsoft?
Still got problems with the trim wheel. Esp in fs2020
Hey I can’t seem to get the leds to light up.
Hello, I make two SIMPLE queries about the LOGITECH MULTI PANEL (I want to find it to use in an Airbus A320neo in FS2020):
- When you change the ALT on the multi panel, it ok on the A320 sim? or how do you interpret the push of the knob? (In the virtual cockpit of the simulator, once you entered the new ALT, one must press the knob (push) to activate. THIS, can it be replicated in the multi panel?
- When you start the sim in a parking lot, does it start on? or can it only be used if you start on a track?
THANKS.
I download but nothing comes, I press I read and accepted then finish. Nothing comes
I noticed the knobs have a pretty slow turn time on the auto pilot panel. Any way to fix that?
Same here. Looking for way to tune them...
Hello !
Does it work with X-Plane 11 ? I can't get it to work even tho I've watched around 4 tutorials; could you help me?
just realized i have the same exact joystick and panels as you do, except the joystick is slightly a different color
I'm trying to fly the A320 with the flight panel but whenever I pull up the gear, it doesn't work. How do you customize controls?
Does this panel work with fenix a320 and/or fbw. Just curious how versatile these might be
Is the „gear up” working by fbw A320? :)
ive tried looking for the plugin starter and cannot find it, please help!
Do you know how to get the instrument panel working because mine is light up but with just a black screen
Same here. The instrument panel is just blank and unresponsive. I hope they come up with a fix soon!
That link doesn't address the instrument panel, which is a large led screen that is not coming on.
My FIPs doesn't work either. Is this something that Logitech/Saitek will fix in the near future?
I hope so, I haven’t got this product but I’ll keep an eye out!
Same here!
Patch nearly works - everything but screen vison [Autopilot] Screen vison on radios etc - but now the controls don't work like yolk no sensitivity available!! Do I kick it? Best Peter
Do Logitech drivers work on the old saitek
Thanks for posting about this. I have a few of the instrument panels and radio panels still sitting in boxes because I was content to wait for first party support rather than buy a third party program to make work what should work on its own. The radio and instrument panels seem to work as expected, with the caveat that the ADF function of the radio panel seems a bit goofy and the 2 decimal place COM radios don't match the three decimal places in the sim cockpits. It's not a huge deal but would be nice if they were matched. For the instrument panel, all of the displays seem to work as expected, though I'm not sure what the intended function of the left side buttons with labels is supposed to be. None of them seem to do anything, but I never used the instrument panels in any sim previously so not sure what is to be expected.
Anyway, thanks a lot for pointing out that Logitech finally released something to get these devices working. They seem to have done it rather quietly.
My Logitech switch panel is not working. Where is the main driver for the flight switch panel, In device manager
Saitek bulk interface there is no driver installed. So where do I find the driver. If anyone can help to get this
working?
The autopilot multi panel looks very good it will free up buttons on joystick and keyboard for other stuff
This does not work for the BIP panel. Any ideas please
What if they still won’t work
do you thin this will work with 2024 msfs
I have a yoke and a throttle but what should I buy now?
hey dude ,thanks for this this ,will all logitch periphials work on mfs 24 do you know ?thanks for your content
Hi, I am using the Alpha yoke which many of the function of the start up, lights ext are pre-mapped already, how could I use both the Alpha yoke and Seitech panel without a conflict? Thanks
Too bad the panels arn't available.
Hi there, maybe a stupid question but do you still need a joystick/yoke or can this switch panel pretty much do it all? Never played simulator?
Because of your information finaly all the panels are working Thnx bud.
thanks for showing this plugin! now the only panel i can not operate is my saitek b.i.p. panel. do you know why?
mine work for a few seconds and never again. the switch panel works fine on the test page
Hello, thanks for the vid. Does the TRIMM WHEEL function also work? I heard the Saitek Trimm wheel device doesn't...or isn't supported? Any news about that? Thx for the effort you put into this.
Yeah this trim wheel on the panel works very well in all aircraft I’ve tested so far, sorry for cutting it out in this video! But I don’t believe the old SAITEK one is supported yet, Thanks for watching ✈️
Saitek trim wheel works fine for me... the old big trim wheel. I think they don't sell it anymore unfortunately :x
I do have FSX not MFS X I made a mistake when I stated it was MFS X. I really don't see the difference as they are both the same. Anyway, I am still not able to get my switch
panel to work. Nothing lights up or operates and I followed all the directions that you have on this video. Hope you or someone can help me get this beast working.
Thanks you so much for the fix. However, after downloading the recent update (1.10.7.0), all my panels have stopped working. I just can't get them to work. Do you have any ideas?
Any fix?
I don't see the Logitech plug in. I've searched for hours and have tried downloading several times. I've tried restarting my pc, and launching MSFS. The flight switch is still dark. I don't know what I'm missing. Yes, it's plugged in. Asking here is my last resort. Thanks...
I was using the Logitech nav panel, doing ILS approaches. I managed to get the Cessna 182 to follow the route and pick up the ILS to land but just before auto landing perfectly ... I lose all joystick controls, brakes camera views and have no way of stopping the landed aircraft.. Is this a bug on mfs2020 or am I missing something. Also my new panel the knob is working loose on the right hand main rotary knob is this a common problem?
Great content and helpful info i can't find elsewhere. Subscribed.
Thank you so much for this. Now I can use all my instrument panels
I have been going in circles as to getting the plug-in for the Saitek products to use with the MSFS2020. I have used the links given by you and others and it takes me to different pages and not able to download the plug-in. Please help, I bought the pro flight multi panel (auto pilot), the switch panel and the yoke system. All Saitek Logitech. Appreciate any help that anybody can provide!!
Can you make the avionics master switch works for C172 Bus 1&2?
Great video. Thanks. I wonder how can I see the Multi panel on the controls options. The panel is somehow working and its imputs are recognize during a flight. However, I cannot see the device next to my other controllers. I cannot map it. Is this normal?
Hello... I have only radio panel, it is working on propellers, but not in A320... does it work for you?
Hi, unfortunately I don’t own the radio panel so I cannot help!
Thanks for this video, I have been plying with the Yoke and panels for a while, they worked perfectly in the Cessna 172 and other small general aviation aircraft. However, whenever I tried a turboprop like the TBM 980 weird things would happen loke raising the landing gear would turn off everything in the cockpit. I downloaded the drivers and they worked fine. I can't believe I forgot to install the drivers when I bought my panels a while ago lol.
when using the supplied driver for these panels, im finding alot of my switches dont actually do anything, but spad makes them function, but at the same time, the radio and ap panels are flickering when i move the dials. moving the dial makes the ap turn off, the readings go to 000 untill i move the dial a little more then all goes to normal
dues the Logitech yoke yoke work with Microsoft flight sim
Hey I followed all the steps but it won’t appear on my desktop
Great video. Do you need any other drivers to make multi panel work not of the box with msfs .just the one from logiteck ?
Thanks for the tips, after installing the patch all the control panels now work. However, the Pro Flight Instrument Panel just doesn't seem to display anything, no matter what I do. Any suggestions?
yeah return like i am doing. it is crap
My FIP panels still dont work with the patch, I have 10 of them, all other peripherals work (radio multipanel an switch panel etc),can you or anyone help
Same here! No idea why, it just doesn't come on.
@@SashaWiesen Same for me
Any update here?? thanks
Where i can find the same computer ❤
What plane was that?
FLIGHT SWITCH PANEL USB OU SE BRENCHE TIL , ?
Any tips for pmdg 777 for multipanel ?
thanks but doesn´t work in my pc, do you have another option?
Hmm. I plugged my switch panel and multi panel in, but only the multi-panel works.
You skipped over elevator trim, and that’s what I was waiting for :)
Does it work? I hate trimming with rocker switches...
Ahh yes my bad, that works fine!
Does it work with Mac?
can not get it to find throttles?
Thanks for amazing video but I’ve some problems with my panels. Its not working when start cold and dark on flight simulator. But if I start runway point its working properly. But I want to start cold and dark at the gate. When I switch battery on electrics are coming and lights on but auto pilot panel not ready for using. Why happening this could you help me?
Hi, I believe this is a common problem but I’m not too sure! If you start at the gate, to use autopilot make sure you’ve got master avionics on regardless of the plane, I know some don’t have it but you’ve got to turn it on to use the autopilot aside from that you can’t actually turn on the AP until your close to the flight plan, so that may be why,
@@PilotStudd I solved it. I checked official driver website and I found new version its solved my problem 😅
Hi bud good video
Done my multi panel
Flaps work and auto throttle but got no numbers on the screen and can’t adjust alt etc also ap buttons not responding
Yeah I believe that’s a power management error, I had the same problem with FSX, just search up Logitech panel power management tutorial and it should help you!
Pilot Studd thanks
I downloaded the plug-in last night ,17-9-20 . Only one problem. It auto installs on to the C drive. There is no option to alter the install path. Now, this is fine if your MFS 2020 is on the C drive. Mine is on a separate M.2 NVME drive . I have located the folder on the C drive. Does anyone know where on the Microsoft flight sim the plug in folder should go?
It works fine with XPlane 11 , but that’s on my C drive. Any help much appreciated. I have installed the patch for the Microsoft Sim all 13.5 Gb of it. It would be be nice to get the switch panel working .
I really want to know... Does this work for Xbox?
i have the yoke plugin, do i need another plugin for the autopilot? just doesn't work
Yes, the yoke driver doesn’t work with this, download the panel driver in the description
What about setting up the logitec gauges; they seem to be more troublesome than the panels, as experienced in fsx.
Sorry Terry, I can’t comment as I don’t own them but this driver works for them so I believe it should work just like how I did it! Good luck
Try spad.next. These drivers have worked much better for me than saitek/Logitech drivers have ever done.
One more clarification: the problem with the gauges in fsx was that they all could only be plugged into USB 2.0 cables/sockets. Did you have that limitation with the panels?
Terry Kulbe No that’s not a problem I had, terry 👍
Most people might use such panel on a USB Hub. If you do that for sure you got to install the driver but also have to mention the power supply. If there are several devices on such port you need a external power device. After I supply the hub with external power all runs pretty well
My multi panel just has a red screen with no letters or numbers
Hey there buddy. I had the same problem and I found this video. ruclips.net/video/qmehcCHC9JQ/видео.html
Hope it helps
I had this same issue when installing it with FSX, I believe it’s a power management problem so just search up ‘Logitech panel power management’ and a tutorial should come up!
Pilot Studd Hey I did the power management and it still isn’t working so I might return it. The letter and stuff come up randomly but won’t come up when I play MSFS 2020
Does this work on xplane
It doesn't show up in the controls menu?!?!?
Question: Once you download the drivers for a panel and then you add another different panel do you have to run the drivers again or just plug in the added panel and it will work???
Just plug the new panel in and it should work!
I did what what you stated on this video, I was able to download the drivers for my switch controller as you show on the video, but could not get panel to work.
I am using Microsoft Flight simulator X. I did retry rebooting but did no good. I am showing the controller as being installed on my computer.
when I go to the settings on my computer Windows 7 computer. Can anyone help??? Thanks!
This tutorial is for MSFS not FSX, sorry 🙂
For some reason using the Logitech drivers causes the sim to jitter and lag. Same thing happened with SPAD so not sure if this is a connectivity issue all round with the panels and the sim!! Soon as I close Logitech the sim returns to normal.
I haven’t heard of this problem before so it’s new to me, could be cpu usage if you’ve got a weak cpu but I doubt you have. Let me know if you find a solution!
Was a sim connect with MSFS issue it has been corrected in the last patch. Anything connecting to it prior to the last patch was killing frame rates even on powerful machines.
Great job! Been waiting for this!
Awesome, glad I could help!
I tried downloading this and I still can’t get nothing to work. How do you get the Logitech icon on your computer. The only thing that has worked for me is the liveries I added. I have tried to load the 32NX mod and it isn’t even showing on my airplane list. I don’t know what I’m doing wrong.
Did you manage to get your panels to work yet?
As a 40 year old noob and my first flight sim as I only got it recently and have a business so capital isn’t an issue I’ve been investing in gear.
Bought this today and have to wait a few weeks but a superb video and I look for forward to learning.
Thanks buddy. Subbed and liked