VW T4 - How to Remove Front Wing/Fender

Поделиться
HTML-код
  • Опубликовано: 19 окт 2024

Комментарии • 76

  • @RedHeadForester
    @RedHeadForester 4 года назад +4

    That trick using the allen key to remove the front panel is going to save me a lot of hassle in future. Thank you!

  • @danw137
    @danw137 Год назад +2

    Hi Joel, thanks for taking the time to produce your T4 videos, they've become one of my 'go to' guides as I restore my 2001 VW T4 800 special. I took my front wings off last weekend cleaned out inside and installed the drainage kit I bought from eBay, your videos were incredibly helpful. Amazingly the wheel arches and inside the wings were almost rust free even though there was a load of damp T4 special Kompost in there! One thing worth mentioning, my front wings were bonded on (pretty sure this was factory panel sealer) as well as bolted and were a complete pain to get off. I had to cut the panel bond and then pour a couple of kettles worth of boiling water between the wing and inside panel to soften the panel sealer, then pull the wing off. It doesn't look like your wings had this sealer so maybe they'd been off before. Anyway, thought that might help someone else who has to do the same job. Thanks again.

    • @EntheogenMusic
      @EntheogenMusic Год назад

      From one 2001 800 special owner to another, thanks for the tip about the panel sealer! Was a great heads up. Boiling water was a nifty trick!

    • @danw137
      @danw137 Год назад

      @@EntheogenMusic no worries, glad my comment was helpful. Usually every job on my T4 takes roughly 3 times as long to complete as the RUclips video shows and a good helping of swearing...so it's nice to help someone else out in the same situation!

    • @JoelsStuff
      @JoelsStuff  8 месяцев назад

      Everything on my old banger has been off before. I am the 15th owner! Thanks for the info about sealer 😊

  • @samwalker9762
    @samwalker9762 4 года назад +1

    Perfect timing for the video! Working on my ‘96 T4 today and this was a big help, thanks! 👍

  • @terryteed1903
    @terryteed1903 5 месяцев назад

    Just bought a T4, so, have a sub and I'll be no doubt going through every 1 of your vidz. Happy days.😊

  • @meatmanifesto
    @meatmanifesto 4 года назад

    Good video you've saved my wings from rusting our, I had a look behind my wings they were pretty full with dead leafes and stuff.

    • @JoelsStuff
      @JoelsStuff  4 года назад +1

      Yup that happens on these vans!

    • @freakunit
      @freakunit 11 месяцев назад

      Is there a way of sucking up.the leaves without removing wings etc ?

  • @deano2160
    @deano2160 Год назад

    Had this on the save list for a few years now and just got round to doing it. Thanks you for the video mate, it helped very much. Good to see whats what before doing a task than going blind. 👍

  • @howieouterbridge1986
    @howieouterbridge1986 Год назад

    Awesome! Thanks for this. I have to remove my wings to access the VW compost. Wish me luck!

  • @alexholver2507
    @alexholver2507 2 года назад

    G'day thanks for the vid.
    I just did my 99 and that bloody metal tab on the grille was screwed in possibly from a prior accident fix.
    For this situation take the bumper off first then rhs headlight top bolts, then rhs fender as per vid to get to the screw, then grill comes out etc.
    I'd collected enough compost for a plant pot!
    If you park under any sort of conifer you need to clean them out every couple of years.

  • @stevep9739
    @stevep9739 8 месяцев назад

    Need to change my front cross member this is very helpful, 👍

  • @gilly4133
    @gilly4133 4 года назад

    Nice, Good to know its just bolted on. Mines has a dent a some rot so I feel if I see a good 2nd hand one its not too bad to swap. Keep em coming Joel :)

    • @JoelsStuff
      @JoelsStuff  4 года назад +1

      Not a bad idea at all. Sadly I looked on ebay and there were none any better than mine

  • @haskyb9184
    @haskyb9184 4 года назад

    Nice little video. I’m hoping to find some videos on rear arch replacements as I’m hoping to tackle that on my T4 at some point 👍🏻

    • @JoelsStuff
      @JoelsStuff  4 года назад

      Thankfully my rear arches seem to be ok. Good luck!

  • @poberauer
    @poberauer 3 года назад

    Thanks, helped me get mine off today. Btw seems simpler to just get the headlights right off and out the way too.

  • @campbellcampbell4157
    @campbellcampbell4157 3 года назад

    The plastic bracket with the plastic clips are to be loved, just push the centre right through and the plastic bracket unclips with an easy pull. If you lose the centres a plastic golf tee does the job when replacing.

  • @leswatson9111
    @leswatson9111 3 года назад

    Hi Joel, roll on good weather A.
    Les

  • @stephenwalker3679
    @stephenwalker3679 3 года назад +1

    Made me begin ! Well done 👍

  • @adetremontionwhite
    @adetremontionwhite 4 года назад

    Thank you for vid, i was a little unsure if to taxkle this job but younhave made it look easish so im gunna attempt it my self cheers buddy👍👍

    • @JoelsStuff
      @JoelsStuff  4 года назад +1

      It’s as easy as it looks. Good luck!

  • @Pepito499
    @Pepito499 8 месяцев назад

    To replace the antenna, is it necessary to do this?

  • @patrickford5358
    @patrickford5358 4 года назад

    I love the KISS principle you apply here. Shows you know what you're doing. Excellent video. I have a loose front panel on my 2001 T4 transporter and I 've been told I need some little plastic lugs that fit onto the end pieces of the panel. Do you know what they are called?

    • @JoelsStuff
      @JoelsStuff  4 года назад

      Hey, thanks! I’ve no idea what they are called I’m afraid 🙁

  • @polderfischer8565
    @polderfischer8565 2 года назад

    That is a very useful Film! Thank you!!

  • @malvaughan
    @malvaughan 4 года назад +1

    Really helpful, thanks mate 👍🏻

  • @WildPhotoShooter
    @WildPhotoShooter 3 года назад

    Brilliant , I learned something else.

  • @stephenfoxall9655
    @stephenfoxall9655 3 года назад

    Thank you for the excellent video. On another video that I now can't find I know you fitted drain pipes from the holes just below the window screen. Where can I buy them with the little metal bits for the holes please?

    • @JoelsStuff
      @JoelsStuff  3 года назад

      Hi there. If you just search ebay for “t4 komposter set” you should find the same kit for about £28 that I used (highly recommended). Good luck!

    • @stephenfoxall9655
      @stephenfoxall9655 3 года назад

      Joel's Stuff yes found these on eBay @££31. Extortionate and as they come from Austria with £8+ fright and probably Brexit import problems I am going to try another route

    • @stephenfoxall9655
      @stephenfoxall9655 3 года назад

      Will try dinghy transom drains to go through metal then just buy plastic tube locally and rest from stock.

  • @johno7808
    @johno7808 4 года назад

    Great video & very helpful thanks! 👍

  • @charliesnell1426
    @charliesnell1426 2 года назад

    I have a question. Doesn’t the pipes just get blocked with all the crap???

    • @JoelsStuff
      @JoelsStuff  2 года назад

      Hey! Thanks for the question. Surprisingly my pipes have not become blocked. However, the debris still builds up behind the fender, so I’m not sure how effective the kit is overall

  • @R0ger007
    @R0ger007 3 года назад

    Is there any sealant between the removed wing and inner wheel arch that needs reapplying when refitting the wing?

    • @JoelsStuff
      @JoelsStuff  3 года назад +1

      I don’t think so. There is a gap but I think it’s ok to just leave that for drainage

  • @EntheogenMusic
    @EntheogenMusic 4 года назад

    Great video mate. Do you know if this is the same process for the later T4 models?

    • @JoelsStuff
      @JoelsStuff  4 года назад

      Great question, and I’m not 100% sure I’m afraid

    • @EntheogenMusic
      @EntheogenMusic 4 года назад

      Joel's Stuff No problem mate, thanks for replying. Love your channel by the way. Just bought a T4, will be using your videos for a lot of DIY! Keep em coming 😁

  • @mcjjordan
    @mcjjordan 2 года назад

    Were you wings not sealed on?

  • @plechovkat
    @plechovkat Год назад +1

    now i know why they called it in my country a nest for hamster :D

  • @BAK87
    @BAK87 4 года назад

    Brilliant. Thanks mate.

  • @tamariderr
    @tamariderr 3 года назад

    At the end when the panel is off and you're scraping out the leaves.. where is the water supposed to drain out?

    • @JoelsStuff
      @JoelsStuff  3 года назад +1

      Hi jack, I have a video on my channel posted shortly after this one where I go into this in detail

    • @tamariderr
      @tamariderr 3 года назад

      @@JoelsStuff that's great thanks. On your break video you comment that you can't get the disks off or you would have replaced them too.. did you ever manage to get them off? Was it the single bolt that was stuck?

  • @leswatson9111
    @leswatson9111 3 года назад

    Hi JOEL just saw your video did that water drainage kit you used work, as I am going to order one.
    cheers. Les

    • @JoelsStuff
      @JoelsStuff  3 года назад

      Hi Les. It’s funny you should ask because just yesterday I removed the wing to have a look at it. Sadly it looks like the leaves are still finding their way behind the wing - they must get down the gap near the door. The drainage kit still works perfectly well to drain water, but if you buy one similar to mine it will not stop the leaf build up 🙁

    • @leswatson9111
      @leswatson9111 3 года назад

      @@JoelsStuff thank's Joel, I will do the water drain, not to bothered about build up of debris, just want to stop water getting in
      cant findwhere,no sign anywhere just wet on wheelarches, new screen going in Tues 2/2
      /20 . Les

    • @JoelsStuff
      @JoelsStuff  3 года назад

      Do you have water leaking into the interior of the van? If so it could be the windscreen - i’ve been dealing with this issue myself and have managed to stop the leak with a bit of tiger seal in a few places

    • @leswatson9111
      @leswatson9111 3 года назад

      @@JoelsStuff Hi Joel, yes driving me mad, had all rubber mat up, no sign of any leak's, all clean paintwork,
      the wheel arches always seem wet after rain, so having new screen put in Tues 2/2 have also purchased
      one of them kits. It'll probably stop raining when new screen goes in.
      Les

    • @JoelsStuff
      @JoelsStuff  3 года назад

      A new screen will hopefully sort it! Best of luck.

  • @buriedintheshed
    @buriedintheshed 4 года назад

    Great video!

  • @jeromeportable1141
    @jeromeportable1141 4 года назад

    Do you know how i can remove for thé first t4? I have not got screw....

    • @carl_hall
      @carl_hall 4 года назад +1

      The wings on early T4's (before1996 I believe) are welded on instead of bolted, unfortunately.

  • @poejalmer8108
    @poejalmer8108 4 года назад

    I'm not sure but the plastic fixings you pulled out look a bit like the T4/caravelle interior moulding screw clips (look them up on eBay). If they are, the small hole in the middle is for an allen key, which draws out a threaded plastic bolt that has widened two tabs out to secure it. I might be wrong but will be doing this before lockdown ends, so will see. Thanks for a great video!

    • @JoelsStuff
      @JoelsStuff  4 года назад

      That sounds like the ones!

    • @poejalmer8108
      @poejalmer8108 4 года назад

      I've now just done mine. Mine had metal studs which had badly rusted heads. I managed to lever them out with a flat head, enough to grab with pliers and then pulled hard to remove them. I replaced them with the plastic trim clips you seemed to have on yours, which works well.

    • @craigthomas7921
      @craigthomas7921 3 года назад +1

      @@poejalmer8108 i have one video on my channel which shows an easy way to get these plastic clips off with no damage (they're the same ones used inside and out)

    • @poejalmer8108
      @poejalmer8108 3 года назад

      @@craigthomas7921 Nice, I'll be carpeting the ceiling one day, so that will come in handy!

  • @kaskader5178
    @kaskader5178 2 года назад

    Ok. But i'm my car the fender is stuck so mach that i can't remove them

  • @Mads2595
    @Mads2595 4 года назад

    Great video👍

  • @citroeno
    @citroeno Год назад

    you dont need to all that to remove fing just pull down sides of bumer to get to bolts

  • @dampcurtain
    @dampcurtain 4 года назад

    So I have none of the bolts shown in your video. I'm guessing that I cant take my wing off. 😫

    • @JoelsStuff
      @JoelsStuff  4 года назад

      None of them? It is a T4??

    • @dampcurtain
      @dampcurtain 4 года назад

      @@JoelsStuff yeah mine are factory welded. I've got a 94 vw t4 transporter.

  • @notsosmartmart5402
    @notsosmartmart5402 4 года назад

    Thank you

  • @davidfirth6535
    @davidfirth6535 4 года назад

    Any wonder they rot, shite design, regards, David.