Toyota Yaris 2005 to 2015 how to remove factory radio & fit double din radio
HTML-код
- Опубликовано: 6 окт 2024
- Video shows step by step how to remove the original radio and then how to install an aftermarket double dine size radio,video includes all part numbers needed.
This is so helpful. I'm pretty good at DIY, but would not have attempted that job without seeing this video as had no idea how a Yaris dash and original stereo was even fitted. You made it really simple - and great hints about protecting the dash when taking out the radio and not losing the screws etc. Thanks so much - you're a star!
I'm so slow 🐌 but after watching this so well explained video i know feel very confident and excited to crack on. Many thanks for your superb work.🙏🏼
This video is very helpful because of well you explain everything and why you do it. How not to scratch it, and carfully install everything. This video makes me confident I can replace my own stereo and not destroy any original parts. Really good work!
I really like the way you explained everything step by step, and pointed out all the little pitfalls. It's unfortunate that the 2008 Yaris 4-door base model sold in the US (which is also called the Yaris sedan, and may not be available elsewhere) is quite different - I'm expecting that the Android Auto head unit I've ordered is going to need some cutting to fit. Some of the differences in the version I have:
* There is more space between the A/C vents, and the emergency flasher switch is between them
* There are no knurled wheels to adjust the vent louver angle
* There are three knobs on the bottom section of the fascia rather than 1.
Good installation video. Been nice to have seen the radio working with all its functions and original connections to the steering wheel and fascia controls.
Literally exactly what I needed and uploaded only a few days ago! Nice one mate, cheers!
Very good instructional video, especially with all the clips that I would've probably broke if I hadn't seen this video. The steering wheel controls dont work now unfortunately, but its easy to change the volume with the radio knob.
Someone wanted to charge me 300 dollars for this. Haha! How about 45 minutes of my time and some elbow grease instead. Jagoff.
This is a great video. I just did my own and couldnt have done it without you. The only thing I would add from my own experience (2007 Yaris mfg in France) is that the plastic around the speedometer comes with the stereo when you do it in these steps. No harm when i yanked it all of together, but i suppose the speedometer plastic should technically come off first and back on last.
Hey mate, u rly nailed it. Great and kinda professional video even for dummies. I could almost swear u didn’t skip any critical thing or forgot about any necessary comment.
Thx for being pro!
Thank you! I accidentally pushed the heat dial all the way into the dashboard. Popped right out after I got the radio panel out. A bit of glue, and now I can use the AC dial again lol.
Omg thank you so much!!!! Your tutorial was super helpful. I just have sore fingers now
Excellent video, very clearly explained every step of the way. Thanks!
Very well explained, makes it very easy for us diy’ers. Thanks
helped and saved me £100 fitting lol cheers dude
Thanks for showing this process my man. It was super helpful and informative.
That’s the best instructional video on RUclips
thanks for the video! incredibly helpful and well explained
Very thorough video. Many thanks!
Great videos.very helpful.Could you give links to the parts that are replaced?Thank you from philippines.
You save me bro thanks you 🥺👌
cheers mate absolutely perfect video
Great assistance many thanks! Greatly appreciated
Hi, thanks for this great informative video! One question, the extra plug you didn't use from the wiring loom, is that for steering wheel controls?
Superb vid, really methodical and clear. Looking forward to completing the job myself. :)
A very simple and good job thanks , but I wanted to ask in terms of connecting a subwoofer, what do you do ?
Great video! Extremely clear.
Just wondered, can you use the wheel controls to operate the replacement head unit, or would I need an additional adapter for that?
You would need an adapter that matched the make of the aftermarket radio.
Brilliant video, & so easy to follow. I’ve a 2008 Yaris, same factory unit, that I’m replacing with a pioneer cd Apple play unit. As I currently have steering wheel controls would I need to buy connect 2 SWC adaptor for the pioneer, as well as an ISO fitting harness, along with the replacement facia kit? Many thanks.
Excellent job and video, thanks. Parts list please
PJ you're a legend
Great job there,so the line out to connect to the speakers and amplifier will be were
Yes your new radio will have a instruction manual detailing that the blue wire powers your aftermarket amp remote input and the new radio should have pre outs on the back to run your rca cables to the aftermarket amp for the signal. Your new amp should have an instruction manual showing speaker outputs that can then be ran to your speakers.
Great tutorial! thank you very much!
Hi PJ, great vid, thanks for posting!
Is there an adaptor available to keep steering controls working?
Many thanks
Dom
Hi! I know this video is from 2 years ago but it’s still helpful. I have a Toyota Yaris from 2007 and I did all the installation of my 2 din radio based on this video. However my new radio doesn’t have the same hole for the screws than the steel plates… therefore I can’t finish it… with the box came 2 other plates but I can’t seem to understand how to do it anyways…. Could you help me please? Thanks a lot!
Thank you
I have done everything you explained. Thanks, but one more question how can I find your parking brake wire on bypass park break wire, please
Just connect the radio parking brake wire to the black earth cable, this will bypass it.
Wow, what a frickin' nightmare.... Toyota really makes this a Pain in the arse... My 1997 Toyota - Plug'n-play (no fascia, adapters, etc that I recall :P ). They have gone from 'easy to fix'/DIY Dream to proprietary in a generation.
Top stuff this! Thank you
Perfect . Ok what modle number of pioneer player . I need only 1 last thing to order
Hi mete its very helpful explanation what about steering control is this work with this mathed
Nice.
Great job there, I happen to have the same car and would like to change the radio, how could I get those very parts you used? Thank you
Hi could you please tell me what is the radio model number for pioneer. Thanks
Hi, what is that "spare"? Its three wires coming out out the original unit, i wonder if its a AUX port.
Hello very helpful video 👍. I have a Yaris 2008 , with exactly the same stereo. Looking to change it. Are you from Manchester, by any chance, maybe you could do it for me. Thanks
Thanks for the video, please where can I get those tools I will like to put such in my car? Thanks
Such a great, simple, easy to follow process. Something I wouldn’t have attempted if I hadn’t seen this video, so thank you. 👍
My step daughter has just bought a 2010 Yaris and we’re going to look at getting her a new head unit.
So can I ask what the details are of the head unit you have fitted, specifically the size screen as I have done a search and there are ones that are either 6.8” or 7”, and didn’t want to get one that was too big or too small.
So any help would be appreciated.
That particular head unit is no longer made but when at the retailer just ask for a double din size radio.
This is an industry recognised size.
@@PJsprojects - Thank you, :)
Hello, are the steering wheel buttons are working well, is non factory radio is compatible with them?
THX FOR YOUR VIDEO...DO WE KEEP STEERING CONTROLS WITH CONNECTIC ISO HARNESS TOYOTA CT20TY01 PLEASE ?
No that one does not work with steering controls. It's just for aftermarket radio fitment power and audio.
what is the radio model you have fitted in this video?
amazing video! I have a question: what should I do if the light of the airbag and belt security stops working? I’m sure the car was off when I managed to change the radio.
You will need it reset with a diagnostic device.
Most garages should be able to sort that.
Hey.. Nice video
So, would you consider it a better / cheaper option to replace the single din unit for a double din in order to get apple iPhone to work hands free / stream music etc?
Otherwise I'm looking at a Parrot or Bury hard wired kit???
Yaris 2007 with SWC 👍
So you lose all of the console controls? Just use volume up and down on the steering wheel?
How did you find the fit an finish of the facia kit? I've heard people say the silver colour is way off the original and that the trim doesn't sit flush?
Great 👌
What’s the name of the pioneer stereo?
Pioneer MVH-A210BT this one
Please could you add a link to where you bought everything. And amazing video
Being trade everything is supplied to me in bulk.
You would need to shop around for best prices.
can you do this on a toyota yaris 2000?
Is the power in the blue connector to turn on the radio? Can you tell me the order of cables to turn it on?
Hello, i bought 2din to Yaris 2010 but remotes on steering wheel doesnt work, i dont know why, do i need some adapter?
Hello the wire harness coming from the car has two different ports but loooed up the radio you Installed and it look like it only had one place you could put a plug in in this correct did you only use one plug instead of the two??
Correct.
@@PJsprojects thank you for the response this helps
6:49 Please can you help me ?
My Toyota Yaris 2009 MK2 stereo does not have the usual Aerial socket like the one in your video.
My stereo only has the plastic connectors and this is confusing me as i have bought an inline aerial amplifiyer which i can't fit as i don't have the usual aerial socket in my car radio.
On all the yaris car stereo's that i have seen on youtube they have the same connections as the one in your video.
1. Disconnect the battery negative lead - will also avoid any inadvertent airbag problem right?
No need but don’t put ignition on with airbag light disconnected.
Thank you so much for the clear tutorial!! If you get a minute could you drop me a message? I’m trying to upgrade the stereo in my 2007 Yaris and just need a bit of a hand with what specific parts I would need! I’ve got a list of a few but just want to make double sure, thank you.
Can you send me the list please haha much appreciated
can you please provide the link to the aftermarket radio? I bought one from amazon 7-inch but turned out to be small. I have a Toyota Yaris 2009. Thanks.
Did you plug the iso wire pack straight into the new unit or did you plug it into the wire pack that comes with the stereo first? Also, on another video you discussed the pioneer sph-da230 unit (I’ve just ordered one). How do I install that green handbrake cable so it is legal on a Yaris like this one? Thanks :)
Some Yaris models are on what is called ISO connections and so plug directly in to the wire that comes with the new radio,some however require an adapter cable (see example below).
As for the green wire you will need to connect it to the earth wire at the base of the handbrake,you should see a push on spade connector after removing the trim and carpet,test this is a earth with a meter or test probe and crimp or solder onto that cable for your switched earth.
www.ebay.co.uk/itm/Iso-Din-Cable-Adapter-Plug-Car-Radio-Suitable-for-Toyota-Highlander-Kluger/202916886587?fits=Model%3AYaris%2FVitz%7CCars+Year%3A2010&hash=item2f3ec9f83b:g:jpsAAOSwE9RbRGMe
Thanks for the video! May I ask what is the 4 screws size and type?
I think your referring to the size 2 crosshead ones.
Not sure if you d be able read this and reply.
Could you be able to suggest a similar unit with reverse cam option.
Regards
Pioneer 160 dab maybe? I would consult your retailer tbh.
Please send the link where can buy this radio and other parts thnks alot
Please can someone tell me what type and size of screws I need to mount the stereo to the dash. It's four screws and they're missing on my car.
Hello, is there any trick to take of Air bag switch, i mean not unplug, avoid go to garage...thanks!!
Could you give several models of the pioneer screen? And size - as I would probably try to get something cheaper than Pioner. ( but I don't know which could fit into this face adapter. ) or I might get the same what you have in the video just need the model and check the price. Thank you
I mean the size of the screen- which fit in to this facial adapter
You would need to ask a retailer or go in the Pioneer web site for the display size of what ever model is current as this one will not be made any more.
This video is over four years old and I retired from electronics over a year ago.
ok, thanks for the reply. @@PJsprojects
I have installed a pioneer 700 series on my yaris, but I don’t have the steering controls anymore. Is there anyway to have the controls back?
Hi
I tried to do same way . Spend money on . But I can't plug the switch at the back of the stereo i have only one clip at the back of stereo. Its the same stereo you are using
Hello. I saw this video and it a really nice and informative video. Can I ask the cost of the complete system and anyone who can fit for me
@@shahzamanhussain4064 The video is over four years old and so the radio is more than likely out of production, you would be better off consulting a retailer or trying Google for current prices.
@@shahzamanhussain4064 The video is over four years old and so the radio is more than likely out of production, you would be better off consulting a retailer or trying Google for current prices.
Hey . How would I make the steering control work. Do i have to solder the wire ? How do I connect that wire
Thanks
Did you succeed in this? Thanks.
Would I have to get that exact model of radio or would the classic rectangle one work
Do you know if the controls on the steering wheel still work after the upgrade
Not with the harness used here. Use the CTSTY001.2 instead
@@carlwilliams3488 very helpful, thanks
Could we have a list of the parts like the fittings and the radio and the face plate? Do you think a novice could do this
I would say if you are not all thumbs you can do it.
Tips:
- check your radio that you have the same connectors as shown before buying adaptors. (mine has a completely different antenna connector that needs a wired adaptor too)
- the "spare" connector is for steering wheel controls. So if you have those and want them to keep working you need an adaptor for that as well. (have not yet researched if those are available or have to be improvised)
As for parts numbers those can change depending on the radio toyota used.
- Radio: use any double din size radio with ISO connectors you like (the one in this vid is apperently no longer available)
- Facia (face plate) CT24TY22 this number is silver. (should contain everything you don't scavenge from the existing radio)
- wiring adaptors: use the one shown in this vid (if you have the same connectors as shown) or search "Toyota ISO adaptor" and compare the toyota side with foto from your radio.
Great Vid.
Can you help me? If you still have original radio that you removed, can you open it to check can Green light be changed in other color. For example Led white
Anything is possible but you would need to change the LED lights inside which would require micro soldering to get the job done. This is very time consuming and so unless you could do it DIY it would be pretty expensive.
I have a question, what radio are you using for this replacement?
Looks like a Pioneer from a few years back.
They change the range once a year so suggest you ask a retailer for what is current.
i see that the facia adapter is 2007> . unfortunately i have a 2006 and can't seem to find the right piece online' any ideas?
www.aliexpress.com/item/33047233043.html?spm=2114.search0302.3.2.6fb62418Hd7tXU&ws_ab_test=searchweb0_0,searchweb201602_0,searchweb201603_0,ppcSwitch_0&algo_pvid=fb0ed851-bb4d-4a19-b2de-022cf0d0ec9e&algo_expid=fb0ed851-bb4d-4a19-b2de-022cf0d0ec9e-0
Help! I’m trying to find a video on removing the lower lower trim panel to gain access to the cigarette lighter panel. My cigarette lighter no longer works so I’m installing a 2 port usb 3.0 power source to charge phones. It will be wired directly to the battery. After watching your video, It looks like removing the stereo then the climate control knob panel would then give access to this piece. Can you confirm/deny?
Hi, I have a Yaris 2008 but the standard radio is not like yours, but the other things (air conditioning ecc..) seem to be the same...can I do the same things you did or does it change something? Thank you
Should have the same connection when it’s removed.
Being in the trade I’ve done hundreds of them without any problems.
@@PJsprojects okok thank you for the quick response..if I can't do some steps can I ask you?
@@marcokappaa The video pretty much covers everything you should need, anything that looks different I would consult your retailer.
@@PJsprojects okok, just one last thing...do you have any link for the things you used?
@@marcokappaa Afraid not, I get everything in bulk via trade outlet.
So if I were to want to add and aux port or Bluetooth would it just be the same process
Can you put the links where to buy them products
So what was the third cable for? The one you said „we don’t need that“…? Is it for the cigarette lighter?
Cause mine isn’t working since then
Hey do you maybe know where i could buy shorter side panels from your video i am buying radio from china and it covers upper front of side radio panels so i need just lower part like yours
Which double dine i can buy?
Can anyone tell me if the steering wheel volume control is still working if u switched the radio?
Pioneer MVH-A210BT This is the stereo guys
How big should the double dinner be
Hi thanks for the video. I have steering wheel controls and I'm looking at getting a pioneer single din system. What do I need to do to make the steering wheel controls work with the stereo?
And can you go into abit of depth as I'm going to fit it in myself 👍
Hi thanks for question i have the same question if you got the answer yet please do let me know
I’m going to be doing one of these in a few weeks and the 3rd connector that was just discarded in this video is the steering wheel controls. There is a connects2 harness that has 3rd connector, a box and an output for the new unit. The part number is CTSTY001.2 and replaces the harness used in this video.
@@carlwilliams3488 nice one, have you made a video of it?
Hello quick question what dimensions is the screen u got? Thanks
I’m trade so this was a random install from a while back.
The screen size is double din.
Hi what make model head unit you used to fit in yaris, great video thanks
Looks like a Pioneer DA-130 but its three years old so that radio will be out of production by now. Check the Pioneer web site for the current year model.
2005 Toyota Yaris I forgot my radio code, could you please let me how to fixit?
Where can I buy that monitor and fitting
Will the buttons on the steering wheel still work
No not without a steering control interface, either ask your retailer or look on the Connects2 web site for details as they are car/spec specific.
Thanks for the video, it is very usefull and detailed.
Can I you use the wheel control buttons to operate the replacement head unit or do I need some additional adapter for that?
Usually you need an adaptor with the extra bit for the steering wheel
Does this still work with the steering wheel controls?
where do you buy those facings thing that fits the right size for ur car and new radio?
Try connects2.com
@@PJsprojects thank you!