How to Replace a Door Window Frame | DIY Door Fix
HTML-код
- Опубликовано: 6 сен 2024
- FOLLOW THE BLOG: www.mrfixitdiy...
SUBSCRIBE: bit.ly/1HmTBBx
WATCH MORE MR. FIX IT: bit.ly/1DDVk99
MERCH: www.mrfixitdiy....
FOLLOW ME ON SOCIAL MEDIA:
TWITTER: / mrfixitdiy
FACEBOOK: / mr.fixitdiy
INSTAGRAM: / mrfixitdiy
PINTEREST: / mrfixitdiy
PATREON: / mrfixit
I was actually able to get the kit which included a new window for about 140$. I had an estimate for a new door/side lite for 7k. That was crazy so I tackled this with the kit, a new paint job, replaced weather stripping, door sweep, hardware, knobs and kick plate. Came out incredible with total price being around 275$. Thank you!!!
where did you get the kit
Thanks for the video, this is exactly what I needed to know. Got a kit for $120 with shipping and it even had the sealant on the outside grid already. Didn't even need to silicone it.
I want to completely replace the window in my exterior door for one that I can open for better air flow. I watched the video to make sure I understand what I'll find when I take out the original window (exactly like the one in the vid). This tells me what I wanted to know. Thank you!!!😁
Holy crap this is the first video I tried and not only do you tell me everything I want to know but the frame you're replacing is my exact same broken and discolored plastic white frame!! LOL! Thank you!!
I recommend painting the plastic frame before installing it too. The plastic yellows & makes it look bad. Plus remove the door (as you discovered) and the door handle & deadbolt, refurbish the door ie new paint new seals. If you're going to do the job go all the way because this it the time to.
I am doing exactly this right now. Problem is finding a video where the guy installs the window seal/trim correctly and tells us what silicone he uses for the trim around the window. I don't know if there is a 2 sided adhesive tape a guy is supposed to use or if I'm supposed to just lay an inner and outer bead of silicone around the trim? Also, how do you know if you have the window and trim centered correctly if the front of the door is faced down on the table when you're installing it? lol
@@beri232 Darth Welder in above comment says "Dont use silicone. Use a door and window caulking, like dynaflex 230. Silicone is very difficult to remove completely from windows/glass."
@@12thDecember I actually just paid the $100 for a brand new window frame and it came with s new seal. My door looks awesome and new after the fresh paint and new window frame.
Dont use silicone. Use a door and window caulking, like dynaflex 230. Silicone is very difficult to remove completely from windows/glass
Thanks for the tip! This is why I _always_ read the comments on DIY tutorials, because of helpful info like yours that saves trouble down the line.
Got to say, video made in 2016, very nice quality production all around. And I love your F-Bomb meter at the start.
Seriously. I don't remember videos having this good animation and production in 2016.
Perfectly explained! My framing has some minor cracks but the door is rusted so I’m painting it & didn’t want to have to mask every single window to spray it.
Thanks sooo much! The 15 lite glass broke in our door and The Glass Doctor wanted $389 to replace. 😱I found the glass with the plastic frames for $20 at Habitat for Humanity!! My husband and I watched your video and we took care of it.
Very helpful.
That’s insane. That’s more expensive than my front door.
I'm sure glad I found this video. I have a door like the one in the video and was able to remove the window and then remove the original adhesive/sealant that has long caused a problem by oozing a gooey mess onto to the door along the bottom edge of the outer window frame panel. After removing the gunk, I used some silicone caulk, as demonstrated in the video. I believe this saved me from buying a new door to solve a pesky problem. Your door also appeared to have the oozing adhesive/sealant; it appears as black matter along the right edge and bottom edge of the window frame; I noticed it 15 seconds in to the video.
I like your quick, to the point presentation. Accurate info without the show. Thanks!
I was able to reinstall the glass and exterior frame without removing the door. Just let the silicone set up for about an hour. It will adhere sufficiently to allow placing the glass and frame into the opening without it falling apart.
We are here to learn about reattaching our small half circle window into our front door. The sealing of your window is the helpful info we needed. Thank you. -Lou , New subscriber.
Thank you. I have a door like this which needs to be fixed before we move. It faced the other side of the garage door which when opened, the door would slam and eventually the frame broke and the window fell, but it did not break. Lucky me! Seems like a very easy fix. Now to try and find a frame which won't cost me a bundle. Thanks again for your simple explanation on doing this.
The exterior side of my front door gets full afternoon sun and is a cracking gross mess, thanks for the info gunna try to fix it!
this is exactly what i needed! and it is easier than i thought. my frame just split but the glass it in tact. I just need to replace it. you explained everything precisely. I thought I needed to replace my door. Thank you so much
Thanks, my entry door window is 6inch x 48 inches but this is the only video I have found to address the process of fixing this problem vs. having a professional do it for $40-$60 dollars an hour.
I was going to replace my door instead of buying a new door grid frame. The bottom grid was broke out on both sides. One day walking through Menards wood trim section I found some trim that looked like the grid. With trimming the old door grid section I was able to fix it using 2 sided tape. It came out good.
Rarely do you find a video EXACTLY what problem you are working on, but even a blind squarely finds a nut every once in a while! Thanks for the video! Now to fixing the door.
Have a friend help you, put the replacement frame/glass back in place, so you don't have to take the door off.
Would it be possible to remove the window and create a solid door instead?
Think about your question for a minute there genius.... does it make any sense whatsoever?
Great video. We tried to put frosted window tint on a door with a 15 lite frame without taking the door off the hinges. When we put the outer frame and glass back in, the glass slid down just enough to stop us from putting the inner frame on. I found your video and we took the door off, laid it on a 6ft. table, cleaned off all the old caulk and put a bead of clear silicone all around, put the door back on top and screwed the frame on and it came out great. Thanks!
Awesome job! Thanks for sharing and glad the video was helpful
I got the information I was looking for. Thanks! In another installation video they said to remove the door, but I was thinking I would rather try without. This video fixed that bit of thinking :)
Helpful if the before -image of the entry door was shown to see the difference your change made.
Finally I found a tutorial on how to do this. My windows are fine but the glue is running down the bottom of the door and is a mess. Now I'm not afraid to take the whole thing out and start over again. Thanks for posting!
You're welcome! Thanks for watching!
This video was exactly what I needed. Was about to replace an exterior insulated door and instead i now have it looking great due to this video, and I'm not very handy. My door ended up being double pane and rattles a bit, I wonder if I should've put caulk on each side of the grille and then let each window sit and solidify to the grille for 4 hours or so before attaching it to the door. Maybe next time.
This is pretty good. Thanks for making these videos. DIY saves you the most money and I believe is the best way to go.
Loved your video. However I cannot remove plastic cap over screw. It is in there so tight. Help!
We have a very similar door and are looking to replace it with a different style frame (one without the grids). Would it work to install a different style frame without replacing the glass?
Callie Taralson did you ever find the answer to your question? I would like to do the same to my front door!
Great video. Have two doors I need to remove glass on, clean up oozing caulk on plastic and then paint doors and plastic piece
Hi, instead of the window panes, can you convert the glass window to a window that can be opened?
Hi, very interesting vidéo and explained clearly. Would you know how to replace a Window frame of an outside door when tne frame has no screws inside or outside? Thanks un advance for the info or éventuellement better for a video tutorial.
I'm also in this boat
Try Sharp Putty Knife. Slid Under Molding/Glass . Work Slow;-))
Can I get a replacement without a grille?
Thanks a bunch. You helped me find a replacement grill and really helped me with the door.
Unfortunately, I was careless with the last screw and broken the 1/2 “ double-plate glass and had to replace it with plexiglass which was cheaper than glass. I am always an learning even at 74.
My door has the plastic moulding ( typical) but no caps on the inside or out .looks like this one has just bin siliconed in . I'm thinking using a utility knife to slip up under have you ever come across that
Nice! Silicone on the window, painter's calk on the trim edge. got it. Thanks!
You can run a bead of the good clear silicone around to opening before inserting the window and frame. Then a bead on the inside before putting the inside frame up. This seals the frame up better in my humble opinion , and you only need one type and tube of caulk. These frames have a nice clean line and don't need painters caulk on them if you seal the frame to the door with a bead of the clear. Wipe off any excess they may squirt out the side right away. If you apply a bead around an 1/8" thick around the openings, you should be good.😉
Is there anyway to just get the interior window frame part? The part with the screws? Ours cracked.
Great video, is it possible to add hole in the glass to make ventilation? the heat in my garage is unbearable!
Very well-explained, and not so intimidated about doing this now.
I'm trying to take off the grill and would love to have my door without it....how do I do that? thanks
Find the door manufacturer by locating any stickers or markings (on the jamb side usually). Look at their catalogue and order.
I pulled my cover off to install window film for glare and UV protection. I noticed there is nothing between the edge of the glass for any type of insulation. So it's basically two layers of thin plastic to keep the warm air in during the winter?? Is there anything a person can put in there to help?
Nice job Aaron!
This video was exactly what I was looking for! Easy to understand. Thanks!
Help! I have an exterior door with the small opening window, the screen needs replacing but I have no idea how to get to it, any help is appreciated. I looked everywhere for a diy video to no avail.
Hey Mr. Fix it. Can you do a video about masonry and using brick (or cinder block) and mortar. Thanks.
I have a patterned frosted window covering that i want to install under the grid. Will that work or will it be too thick to reattach the frame?
I have a window in my back door but I was hoping to take the window out and change it for a window with blinds built in. Does that sound like something that is doable?
This is _exactly_ the tutorial I needed to replace a frame that has some minor but unsightly cracks. Looking forward to dropping a couple F bombs, but it's better than dropping 10 F bombs over the cost of replacing the entire door. Thanks!
How do you replace a broken glass if separate in squares,,?
Is there somewhere I can find the replacement screws? I have a few that were rusted and broken?
I have checked all my local hardware stores, and big box places. Would you have any suggestions?
CAN I OVER TIGHTEN THE SCREWS AROUND THE PLASTIC FRAME ? Is snug good enough ?
Thanks !
What about if I want to remove the grill but keep the frame/trim, so that I have just a smooth window with no grill?
Had a door just like Mr.Fixit had. We originally were going to buy a new door, but then found door glass replacement. When I found this diy, we decided to simply buy the exterior side to the window frame as the window was in good shape. Mr.Fixit made it look easy.
Hi what can I put over the glass for privacy renter friendly? It’s a metal door as well. I just taped line paper to it aha 😅 but it’s so ugly!
Can you replace that glass?
awesome, stumbled on your channel and just ordered these frames last week. my replacement frames come with new windows so should be easy enough. subscribed.
where did you find the frame/door thingy with the glass?
@@vali3878 hello. I bought mine at my local Lowe's. Just measure the window and speak with the guys in the door section. They had to special order them, but they arrived in about 2-3 weeks.
I think the Pennsylvania frost/thaw cracked my frame. Anyone suggest a type of glue to glue the pieces back together?
Or maybe where to buy a replacement frame? Have same door but top of window is arched.
Our lab chewed the bottom section on the inside and my wife dribbled paint down inside the outside frame when she painted the exterior. About to have the inside replaced. Hopefully Lowe’s or hd can help
Awesome I am going to try this!
I love the way to put these things together and is hilarious
Where can I find the black thing that is in between both glasses. I ruined that part.
A quick question. Home Depot in Canada does not carry these. Where can I find a cheap, plastic frame anywhere, even online? Can't seem to find them on the internet. Thanks if anyone can help.
OK you just made me like home improvement. Thanks
Has anyone seen Dako doors and windows? I bought them a few weeks ago, and I would recommend them to anyone looking for good design and quality.
Thanks
What about on old antique wood doors that i need the window panes taken out (total panes =24) no unscrewing ability, seems i need to break each pane but how do you suggest doing this safely, neatly and easily? Thanks
Those are probably glazed in place. That can be a little tricky. If they're antiques you might want to get some help
Lol, this was exactly the video I needed and I love your style! Subscribed!
Straight to the point, thanks dude
I have a sliding glass window on my door and the frame of the window is broken. Where can I find a replacement assembly? I have gone all over the internet, Home Depot and Lowe's with no luck. Trying not to replace the entire door if I can avoid it.
My backdoor looks exactly like this however previous owners covered the screws with something that I can't remove. How do I get the frame off without damaging the glass?
They should be plastic plugs. If so, carefully use a small screw in the middle of the plug like a corkscrew and pull the plug out.
I wasn't looking under 'thingy" but close as I thought the word was 'minions'... I didn't find mullions and now I will look under the correct word muntins. It's not like I use these words or need to find these things every day...So happy I found your video so I know... just take the door off the hinges...
This was perfect. I ended up getting the window/framing combination from Home Depot. I'm glad I did. The insulation around the window was much better than what I took out and it came with a bead of semi-sticky stuff around the edge for the outside, so I didn't need to use silicone caulking - although I put a thin layer on anyway.
Are you saying you didn't use the standard replacement frame and built your own?
I love and hate these mullions, I like them because they look nice and I can hang small wreaths on the for holidays.
I hate them because they're difficult to clean and the issue you fixed in your video. And that they yellow over time..
Thanks for the how to.
Excellent video
literally found this by searching ' window door thingy '
Perfecto!
My glass is fine, but the plástic frame broke. Where can I buy the plastic frame....tyia
Thanks!!
We took the inside frame off and the glass fell out onto the floor. Thank goodness it didn't break but now I have 2 pieces of glass. Oh nooo. What now?? I think the seal between the 2 pieces of glass broke. This thing weights a ton. Trying to figure out how to fix it. Any ideas? We will take the door off this weekend because it's getting late now.
Wow that looks great and you make it look easy! We were robbed and I’m kinda wanting to replace the glass with wood so they can’t break it. 😢
Thanks Man. Great DIY video
Great job
Brother you just saved me hundreds o fb dollars
good job!
Nice fix,my basement door window glass frame was recently damaged by a falling tree,so lucky that all the tree did,could have been much worse,since the rest of the door looks like shit any way,I'm calling it good since the glass didn't break,White Duck tape it'll look just like it did before...like crap.😅
Why can’t i buy this in europe, netherlands!?
do you know what type of screws are used to fix the window ?
Thank you just the information I needed
Great job!! Thx again
To be like this superhero at 2:40 😅
Couldve smashed it all 😢
The darn screw holes on my door are all filled with some type of hard glue instead of a cap. This was supposed to be an easy job haha. Thanks for the video!
Cap, What Cap? No caps but great video
This is so helpful. My dog chewed pieces of the grille and I need to fix it.
Just what I needed thanks
Silicone or Quad caulk on exterior of frame not painters caulk.
Great humour! Love the video
I really thought you were going to get a new frame without the grid. Do they sell those ?
Yes they do or u cud even get a decorative glass insert to make ur door look even better
Honestly, you can buy a new frame and glass for $131.00 on Amazon. If you use masking/painters tape and secure the outer frame to the door and then place the glass and then carefully the inner frame, its much easier and more practical than removing the door.
Hey I tried that. My helper on the other side kept letting the heavy glass push against the taped frame before everything was in alignment... and it should shift out of place. What really worked in the end was pinching the frames together at the top, midpoint with one screw. The whole thing was like trying to make a sandwich upright... ugh. I wish the frame had been already attached to the exterior side. There were no instructions. So aggravating.
So Helpful!!!
Helpful information. thank you.
Thank you. It worked!,
I have a door just like that but I want to change out the solid window with one that opens.
Would have been a good opportunity to sand and paint the door since it will clash against the pristine new white frame.
Wouldn't it have been relatively easy to make those frames from wood instead of using plastic?