Ideal Wire Nut Assortment Pack: geni.us/rL6eVG Ideal Push In Assortment Pack: geni.us/hoAAH WAGO 221 (2 Wire): geni.us/TAwOB WAGO 221 Kit: geni.us/H2Jp Tools Every Weekend Warrior Needs Makita Cordless Drill Combo Kit: geni.us/t7dIA Dewalt Drill Bit Set: geni.us/oFlSl Dewalt Screwdriver Bit Set: geni.us/VDcr Craftsman Screwdriver Set: geni.us/jXqFI Eklind Allen Wrench Set: geni.us/7XfvO Pliers (4-Piece Set): geni.us/RIdx Milwaukee Fastback Utility Knife: geni.us/MlyiLk Stanley Tape Measure: geni.us/bUfD1R Studbuddy Stud Finder: geni.us/RySCuVw Johnson Torpedo Level: geni.us/wiLcDY Stanley Hammer: geni.us/bPDk8Wo Buck Bros Wood Chisel Set: geni.us/vk3cpTW Klein Voltage Tester: geni.us/h9Hl Klein Outlet Tester: geni.us/kdBAJ Milwaukee Wire Strippers: geni.us/5zuLAbC Little Giant Ladder: geni.us/fmlmTk DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
I grew up with the plain, no-wing wire nuts, but I'm sold on the wago lever nuts. Your demo on stranded/solid wire behavior was superb. I'm a DIY guy, but also a graduate EE.
The Wagos or push ins have a great advantage when hanging fixtures. The stranded wire from the fixture can be pushed in "on the bench". Then on the ladder you only have to push in the solid wire- very easy!
OK, you just sold me. Having a bad back and standing on a ladder, looking up, AND holding something above my head is a act of self-punishment. Being able to shorten my time in that straining position (I can't even breath normally!) is a blessing I will some extra coins for.
I've been using wire nuts for almost 50 years as a DIY electrician. I converted to Wago 221s recently and I love them. I used all 221s to install new shop lights in my basement including a wall switch and outlet and I feel like it saved me a lot of time. Particularly when I realized I'd mis-wired the switch connection to the lights. I was able to pull the 221s out easily and fix the problem. This is a lot harder/messier when using wire nuts. (nb I learned my DIY electrical wiring up nuclear reactor control systems in my teens. Try meeting NRC code...)
DIYer here, I just bought some push-ins for a ceiling fan project in my garage. They will save some effort doing the final connections while working up in the attic balanced between ceiling joists!
Wago 221 is awesome. I like that they can handle wires of from 24 to 12 gauge, and that they are easy to both install and remove. For a DYI homeowner it just makes projects easier. *I also use them for hobby applications* because they are easier than soldering.
Got a multi-pack of WAGO 221 when installing some lights. They were by far the easiest way to join the high-gauge (18 maybe) stranded wire to solid copper.
Working on renovating my house and I just found these connectors, I can't believe I didn't know about them. These save time, room in boxes, and peace of mind. I will be retiring my wire nuts!
Love me the Wago connectors. Started using them a couple years back, hands down awesome sauce. Easy to use, easy to disconnect, easy to reconnect/reuse.
I'm a retired remodel contractor, but still do some small jobs. I recently found the Wago connectors I am really liking them. I wish they were around When I was working full-time.
I'm a DIYer and I helped my dad build his house from the ground up. I learned with wire nuts and I like them for what I do. I feel that as long as you use whatever you are using correctly you are fine.
same here i prefer wirenuts, BUT it finally happened to me. working on an old house where previous electrician (should slap him) made a mess. back feeding, reversing wire, adding hot wires where he shouldn't have. old wires (the ones with thread on them) were badly connected. the copper was brittle and pitted. with customer watching and my assistant, wires sparked in from of my face (just like an exploding cigar on cartoons) BAM! customer got scared, assistant starts laughing, i'm not fazed (always wear my face shield) after having a good laugh i cut all the wires but the live ones were too short to pig tail off of. that's where these lever Wago's came in very handy. took 6 hours to complete job plus great learning session for customer and my assistant. the job was to fix an outlet that kept having power then nothing. customer liked the repair that we ended installing recessed light all over the house and mounting a 50 inch TV on the wall. advice to all out there *"don't try to make a quick buck by doing shoddy work"*
As a DIY'r and having worked for the local utility having seen the cause of house fires caused by incomplete connections heating up to flash over, I have switched to Wago 221's and appreciate your demonstration confirming my choice. I have difficulty with old wire in my 70 year old house which make making connections more difficult.
I rewired a big chunk of my home over the summer before we moved in, I wish I had known about the wagos then, I’ve been upgrading to smart light switches and have been using them for that and they are so much easier to work with, will be using them exclusively for my garage reno that I’m doing in the Spring
I had put up with wire-nuts for decades.(but on the job in aerospace electronics I used crimp connectors). The first time I saw push-in connectors I immediately switched to them. I see its time again to switch to lever connectors. Thanks!
@@oaklejant Push-in wire connectors are not really designed for re-use. When you push a wire into one, the metal inside clamps around it to prevent it from pulling out under normal stresses. These new connectors (Wago and similar) instead have a lever. If the lever is up the contact is open and a wire can be inserted or removed. If the lever is down, the wire is clamped in place to prevent removal.
I work in the industrial automation field and Wago Lever Nuts have been a game changer over the past 5 years for our designs and applications. The biggest benefit is the ability to insert test probes and easily remove wires for replacement or troubleshooting.
Done several projects. Everyone I know uses them. Very glad I saw your video. Easier, safer, and more compatible; should have been there sooner. Thank you.
Building my van I've used them all. Wago's are the way to go if you can't solder. Running 12G wire in a 12v system hooking up LED lights that come with a 24g stranded wire. They are fantastic! Working in construction I've seen all kinds of things. Done by Master electricians. Some are amazing and some are not...lol!! Great explanation and video... Thanks!
I used wire nuts for 50 years but I'm really sold on the Wago Lever connectors. A big advantage especially when connecting 3 or more #12 wires is that the Wago takes up less space and the wire without the twist is a lot more flexible making it much easier to fit into junction boxes. The Wago Lever is a lot easier to connect additional wire, simply pop levers and install new connector with an additional port while wire nuts usually require cutting the bent up ends off and restriping and twisting.
@@Stefan_Van_pellicom I was test flipping 221 and noticed a deterioration on levers (becoming soft and one stopped working) after 50th use. Didn't see similar behavior on PCT-213.
New can recessed lights come with push in connectors attached to the lead wires. I never knew about the push ins until I started installing the lights. After reading the instructions and figuring out how simple it was and finished the installation I got right on Amazon and ordered a 20 pack of push ins 4, 6 and 8 lead connectors for future projects. Fabulous invention.
i started using wagos a few years back and they have become my go to connector. not only are they easy to mount specialy when standing on a stair in god knows what position. but they are also made for fine thread wire. with the plate connection. it makes sure to press down on as many wires as possible.
Just last week saw the suggestion for the wago 221, and ordered some immediately. I've got a recepticle box that I updated the switches in, so it then had 5 neutrals, and originally I had to split it into 3+(2+1) because the wirenuts could at most handle 4. It was basically impossible to stuff everything back inside. The wallplate was visibly floating off the wall where the wires bunched up and the switch bottomed out. Those wago made everything so much better, cleaner wire runs, low profile, room for 5, and it was actually possible to press it into the back of the box, by moving 5 - 14AWG wires, instead of trying to manipulate what was basically a (1/0) AWG. Sure its more expensive, but this should be in every DIY's toolbox anyway, ESPECIALLY if they plan to swap out those old toggle switches with something newer like a paddle, dimmer, timer, etc that take up more space in the box.
It's also worth noting that there's a maximum number of wires rated to be used inside of an electrical box due to potential heat/fire hazard. So although organizing the wires may allow you to fit everything inside the box, it may be a wiser idea to replace the box with a larger box.
@@jtrthehax - If you're a DIYer like me, this is a terrible idea within a home wall. The idea of taking apart any drywall (or worse, plaster or paneling) to replace a box simply multiplies the work time by a *lot*. How much spackling, sanding, spackle finishing/painting is required after you make the hole big enough to do all this? As a DIYer, I don't know how to put in a new box without radically expanding the hole, and I bet most others don't as well.
Agreed, WAGO 221 is the best option. They have become very common here in Norway too. Also consider the great benefit, where you can re-open the connections without damaging the wires. Great system.
@@xic2365 Hello. We have 230V 50 Hz system in Norway and the continental Europe. I think there is no specific difference between voltages, it has more to do with the max current loads they can manage to handle before they melts.
You sir by far have given the best description of wire connections. I’m still getting a license electrician for my final inspection. For a breaker box relocation from house to the garage.
I just used Wagos for the first time ever, yesterday and again today. I found them simple and convenient to use. I'm replacing all the switches and receptacles in our 25 year old home with spec grade getting rid of all those cheap back stabbed devices many of which were cracked and had loose connections.
Any spring loaded clip will fail with heat and time Springs do not like heat electricity causes heat the design of the Wego makes a full load of electricity go through the way go instead of from wire-to-wire they will absolutely one-hundred-percent fail no doubt within five to six years
@@gnormanhayes The Metal usually straightens under Heat (reverts back to its original configuration of a Metal Sheet), and Wagos are constructed in such a way that that heat would actually make it press more on the wire rather than get loose. Dont think it cn excert much pressure, but doesnt get loose. In fact overload testing (more than 10x rated load) shows that the Plastic melts away entirely long before the Connection could fail.
Wire nuts #1 and Wago's#2 especially for low voltage. Wago's are especially good for tight boxes. Always tape my connections. Never had a problem. Nice Video. I am not a full time electrician. I just do work on houses I have built. Safety is always a priority concern. Thanks for this video.
Wago connectors are awesome. I even keep a handful in the "junk" drawer in my RV with the fuses for making quick electrical repairs/changes when out camping. The connectors pictured are the new design of the wago. the old ones were great too but the new ones are so much easier to use and about half the size.
I have always used wire nuts because I didn't know there was something else available. I have seen recently the push-in connectors but never liked them because they don't came apart. After watching your video I went to Home Depot and bought some Wagos. I really like them. In older European cars they would use wire terminals that had screw connectors instead of the plugs the American car companies used. I loved that style of connection. So much easier to take apart and rewire if need be. Thanks for the information on the connectors.
That’s basically the case with every country other than the US. It’s like paying with checks, no one other than Americans uses them since the 80s lol 😂
@@vwlukas the reason why is because people are allowed to sell or buy what they prefer. You can't ban the use of wire nuts if they still work fine as an alternative.
DIY-er. Yesterday I was installing an outdoor light fixture and made the following mistakes: 1) reused older wire nuts as new ones seemed too small. 2) Did not form twists in the wires as shown in the video. 3) Used messy old electrical tape. I have to adjust the light as it did not mount flush, and I will be using the WAGO brand. Thank you so much for sharing this video.
The thing that has held me back from using the push ins more is I hadn't been certain they were acceptable by code. This answered that question. That said, as a DYI'r I'll definitely opt for a Wago since I do so much less work than a pro that the higher price isn't that much of a bite.
I had seen the WAGO 221 on RUclips awhile ago and decided to order a handful just to see if they were as good as they were advertised. Yesterday, I had my first opportunity to use them and I'm 100% satisfied that are are that good. I had to use them in an awkward situation and they made the job so much easier than wire nuts. They are extremely easy to use and make excellent connections. I have used the push in connector, too but they don't offer the flexibility of being reusable. Once the wire goes in, it won't come out.
I would be an enthusiastic DIYer and was glad I found the wago 221s - they are simple to use, you can see the wire inside and are so slim that they fit into tiny openings; the extra cost is so irrelevant when you have confidence that the wiring is safe and secure.
You better learn how to properly use wire nuts and make proper connections.Wagos suck and are a fire hazard. I have been an electrician for 35 years,had a Masters license for 20.
@@errolmagill1611 They DON’T have issues. It is the best German quality product you can buy, and in Europe they are the ONLY connectors in use. You can use them with great confidence. Don’t be deterred by people who have done things their way for a 100 years and are unwilling to adopt new and better systems.
They are UL listed so they are tested and safe. I just had a master electrician come in and help me with some stuff I was not comfortable doing. He said as long as you cut your wire to length (as shown on the side of the Wago) and set it in properly, they are completely safe.
I am a DIY'er and once I found the Wago's, I am a big fan and have a package of them in my electrical tool box. They came in handy when we redid the outside lighting at our American Legion Post. The other two guys working (also DIY'ers) were impressed and said that they would probably get a multi-pack of the Wago's.
Scott, I picked up some Wago connectors from Amazon and used them when replacing a couple of switches and dimmers. I love them and will not use wire nuts again. Maybe a little more expensive but well worth it. This is especially true I think for the home DIYer that doesn't need all that many. For an electrician I can see the cost may be more prohibitive. Thanks again for the great review!!
@@gnormanhayes Most electricians use them here. Are you saying in 5 to 7 years these will all fail in thousands of houses? How could the inspectors pass that? How can the electricians be using them knowing they will all fail in 5 to 7 years? and all these houses will burn down? BTW my 12 year old house is still standing with no problems.
I never heard of Wago until I watched your videos. I just bought some 221's at Home Depot and am excited to use them. I bought a couple of small packages to swap a light fixture and will buy the bigger assortment pack from Amazon. I'm converting to Wago instead of wire nuts!
For light fixtures, or other connection from stranded to solid, I use the WAGO 224 series connectors: Gray (224-101) for Hot, White (224-112) for Neutral (which actually accommodates two solid Neutral wires). They pack easily into the fixture, allow you to 'cap' off the Hot and Neutral from the mains, and allow an easy, safe swap out of the fixture in the future. Just squeeze the connector to insert/remove the stranded wires connected to the fixture.
In my opinion another great reason to use WAGO or even push in is the longevity of the wires. Over the years, you will inevitably change switches, receptacles, add devices, or do other things that require "unwrapping" a twist type wire nut. You can do this many times of course, but eventually, the wire either fatigues or just gets so out of shape that it has to be shortened. There isn't always enough spare length. The WAGO and push types are far less damaging to the wire itself.
I’m a DIY guy with a lot of experience working on older homes and bringing the wiring up to code. I recently tried the wago connectors. The pain of the price was quickly forgotten after a long day of pulling wire and installing boxes and all I had to do was push the wires into the connector to finish the job.
I love the lever connectors. The first time I used one, I was sold. They are much better timewise than wire nuts. Further, they provide more space in the box than wire nuts.
In 2015 I bought an old mobile home and put in all new outlets and switches. In checking out the requirements/recommendations, due to the MH being wired with aluminum wire, I found Wago connectors were highly recommended. I went to every home improvement store and electrical supplier I could find. Most had no idea what I was talking about. I ended up getting them from a supplier on line and paid more than $3 each piece for them. They were the push in type. It was a large bill for such a project but made the job much easier to do.
I used the Wago lever nuts today, I had a massive amount of wires in one junction box and had to diagnose why not only the lights didn’t work, but the outlets not having proper power and the breaker tripping when the 2nd lightswitch was flipped. I’m not a pro electrician but it was invaluable to be able to swap wires from one Wago to the other to figure out everything without having to restraighten and untwist wires constantly.
@@DrHarryT thats not gunna be the case. Get what ypu pay for as he showed. But no corporation is going to pony up for the extra cost even tho it saves in labor substantially. So thats why everyone love wire nuts, i use them just to save on wagos when i dont absolutely need a wago.
This is exactly the information I was looking for!. I’m a DIYer and I have to replace some fixtures in my house to get it ready to sell. I HATE wire nuts! I like the idea of having something easy but more importantly secure. The additional cost is worth the peace of mind and the safety aspect. At the end of your video, you suggest DIYers get a Wago Multipack with different sized lever nuts. If you haven’t already... could you do a video explaining what projects or applications would require the different Wago sizes... i.e: 3, 4, & 5 wire lever nut. Great video! On a side note... I have never saved so many videos from one person!
I had the option to use the push in connecters today, when I had to replace a failed light switch. I used the connecters to add on a couple of 6" pig tail wires, on a very short set of wires coming into the electrical box, which were connected to the old failed switch, with the classic wrap around hook to the terminals. What a difference that made, the push in connecters, were so user friendly, and helped me out greatly. I also upgraded to a commercial switch, with the lock down terminal plates, and had greatly helped with installation of my new added pig tail wires. Thank you so much, for sharing this video!
I am a licensed electrician. I use both wire nuts and Wagos. I have been using Wagos for 10 years without any problems. Wire nuts are fine also. I do find more problems with wire nuts in the field, people miss using or not correctly installing wire nuts. I like the Wagos because I can see the connection. I have had zero problems with them over heating. I use Wagos more than wire nuts.
I have been using wire nuts. I have experienced the "non-hold" problem. I WILL check out the push-ins because, until now, I never heard of them. Thank you for this video! 😊
I've always used wire nuts and do a pull test. When connecting stranded to solid, I would always solder coat the stranded before mating it with the solid and using a wire nut. Thanks for enlightening me to these other connectors. I'll be using them in the future.
If you just ensure you start with the stranded wire stripped and extended longer than the solid, you can dispense with the solder tinning step. The stranded wire will always wrap around the solid, so it requires more length in the splice, so you just need to allow for that. Or pay the extra cents for a lever lock, if it's worth the time saved in soldering.
I find the greatest advantage for the push types vs the wire nuts is the volume and shape of wire that ends up stuffed into the box. No more twisting into huge, difficult to mold in place stalks of multiple wires. No more or at least less cursing when you find the last person in the box did not leave enough lead. *** But the best effect is that the push types leave more space in your box which means safer heat dissipation and easier access ***. I'n a DIYer who's used all 3, but for my own home I use Wagos.
Having worked as a CCST for a major natural gas transmission company (25 years). I used winged wire nuts 95% of the time. Since cost was not a big factor but reliability was, I went the extra step of putting a tie-wrap at the base of each wire nut. (I also replaced all standard wire nuts with the winged type.) This became my own signature marking my work. I occasionally used both the push wago and lever action wago connectors where I was repairing /updating old work where space was limited and/or wires were a little too short. These devices could be a life saver in time sensitive field repairs. Each have their advantages.
I just finished wiring a room using the Ideal push-in. Easy. If I had the Wago, I would have used them, too. I like the Wago because you can undo the connection.
I am a professional electrician for 30 years I have been using regular wire nuts and pushing wire nuts for quite some time but these new wago Are a lifesaver saves me time save the customer time so I can move to another job and make me money and keep the customer happy and I know They will be safe
For various reasons, Wago is the way to go for DIY’ers. I’ve been using them for a couple years now. No problems and so much easier. The cost is a factor. I change/add/replace a receptacle or light fixture 3-4 times a year. Well worth the time and trouble trying to get wires tied together and at the moment you push the connection back into the box, a wire pops out!!!
When I've searched the internet on wire nutting solid and stranded wire here is what I've always found for advice: If you hold the ends of solid and stranded wire even with each other while you screw on the wire nut connector, the stranded wire will often wrap loosely around the solid wires, resulting in a loose connection. The problem is easy to prevent by extending the ends of all stranded wires about 1/8 in. So I think you need to give the wire nuts one more try since you led with the solid instead of the stranded.
His point was that a DIY guy wouldn't have the experience or knowledge to use them correctly. I've already seen a couple comments from pros that said they have to be even when inserted, which might work most of the time but still leaves room for error. He should have identified the correct way to install them for anyone watching that doesn't know though.
This is why electrical work should only be done by a competent electrician. I used to work with "electricians" who didn't understand why their AFCI kept tripping when they turned something on. 1. Didn't read the instructions, 2. Didn't know how it works, 3. Weren't properly trained. The worst thing is that they think they know what they're doing just like this guy. I definitely wouldn't want to have a large window AC running on this type of connector anywhere in the circuit. But I would with a properly installed Wirenut.
I have been using the ideal push ports for over 5 years. I have the 2 ports up to 8 ports. I've had one problem out of thousands of terminations! I really like how you showed the wire connection inside the port, which is the main problem of people not installing the wire in the ports properly. When I install light fixtures using 14 Guage and stranded wire, I prefer the smaller orange wire nuts.
I'm closing on my first house later today and you've really opened my eyes to a difference in electrical component quality that I didn't know existed. Between the wago flip nuts and commercial grade recepticals, I'm going to be replacing all of them with the higher quality. You're amazing.
Wire nuts are the best.. They use copper in the wire to make the bond . Wago uses a dissimilar metal buss bar which over time will corrode from Galvanic corrosion...
Back in 2014 I was renovating a part of my home, and saw a review of the Wago lever-nuts. I fell in love with them because I have been that poor schmuck who had to unscrew a 3-way nut to add one more wire, and then a week later had to unscrew the 4-way nut to add one more wire. So the idea of being able to quickly fix that was very attractive. I bought a bunch of the lever-nuts, I still have them, and I encourage everyone I know to use them. My only complaint is, as you point out, they're somewhat fat. So when the box is already tight it can be a chore to get things arranged. In particular, the "smart" thermostats for electric radiant bathroom heat are a stone bitch to fit into a small metal box. But it CAN be done. (Just make sure you charge by the hour for this.)
I've always used wire nuts for my installations. I've never heard of the wago connectors. I am very impressed and will start using the wago. I've always had problems with unsecure wire nut connections and would usually wrap then with electrical tape to secure them better. The wago is a much better connection. Thanks foe this video.
Wire nuts fail by system. Any screw nut combination fails with temperature change or vibration without spring lever or glue. Wire nuts are inferior unsafe devices only used by medieval agricultural societies like US. Other world uses hightech german WAGO world market leader
I have used Wago and alternatives that look identical on Amazon and both work very well. I bought the alternatives by mistake becasue when you search for Wago on Amazon it offers alternatives that look almost identical and to be honest they work just as well. Its the concept that is so elegant.
All have their pros and cons but something to keep in mind: The lever nuts may save enough in labor to make up for the cost. If you're going to use lever nuts, use Wago. They're UL listed and, if it matters to you, the 221 has a test point so you can check voltages without taking it apart. No matter what you use make sure it's rated for the amperage you're dealing with.
@@Steve_Edberg Yeah, that's probably true for someone that does it a lot. I use the lever nuts in 508A panels because most customers will pitch a blue fit if they find a wirenut in the wireway but glance over a lever nut.
@@Steve_Edberg little tip if you're working with solid wire, lever nuts also function as push connects. Only have to use lever function to remove wire. Saved tons of time as a filthy DIYer
The test point feature of the 221 is a good idea in concept but poor in execution, because the opening is too small to accommodate all DMM test probes. If you do use that feature, make sure the probe tips are narrow enough to go through the opening and contact the conductor. A lot of the probes I've tried are too wide to get through without forcing it in enough to displace the plastic. Once it's been sufficiently enlarged that way, it'll work fine. Otherwise you could get a false negative reading and think your circuit is deenergized.
As a DIYer i used the 222 in one of my friends house and it worked very well as idid the whole house. The 221 was not available at that time. But, certainly will buy some if available at the Home Depot.
I adore those Wago lever-nuts. I've been using them in wiring up LED lighting for several years and they are so much more secure when you can use them.
Thanks for the informational. Very helpful. I have found that by making the stranded wire slightly longer than the solid copper and pushed into the twist cap ahead of the solid copper gives me a firm connection. Again thanks and keep it coming.
I've used the twist connector and the ideal, but bot the lever style. I'm a hybrid in experience. I'm a do it yourselfer, but with municipal electrical maintenance and construction experience. I also worked under a contractors license for a company. So, for my own experience, i like the ideals and lever style connectors. However I so like the 20A receptacle push in connectors with screw tightening. Good analysis. Thanx
I have one more comment on Wago push in wire connectors. Lets say I rough wire receptacles in a basement. I install the Wagos at roughin. I can test the circuit to make sure I have power at the end and then disconnect it from power while the drywall guys do their work. I then pig tail my receptacles. When its time to install the devices each device takes much less time to install than having to use wire nuts. I like the time these save me.
I've used wire nuts for a long time as a DIY'er and never did like the way stranded wire behaved in the connection. I also don't like using stranded wire in push in connections as they can fray far too frequently for my comfort level. I recently learned about Wago connectors and like their methods. Our Home Depot here in BC Canada actually has them. Very cool and if I have another DIY project, especially with light fixtures, I'm going to use them.
The first time I saw a Wago connector and tested it, i was sold particulary since it has all the right agency approvals too and used for decades in Europe. As a homeowner, my repair needs are spotty, and this provided rapid to do, and undo, quality connections, UL approved and next to no training required. The real challenge I find is to insure its not counterfeit, when buying it from say, Amazon over DigiKey, authorized distributors matter here and the difference per item is only in the 10-30c a piece.
I'm a DIYer who has done new, rewire, and pigtail copper onto aluminum in residential in multiple homes. I have a free supply of assorted wire nuts that I'll use until I run out, but once I do, I'll switch to using Wago's. They're so much easier to install!
Nothing replaces just doing every task properly. So great for these more safe options for those who for what ever reason have a hard time doing things properly or even carelessly.
I ordered the assortment from Amazon via the link above. For me to be able to easily do electrical projects safely myself is worth it, way cheaper than calling an electrician. Who cares if the connectors cost 50 cents each, I won't use that many as a homeowner. Thanks for doing this video...I've always had trouble using wire nuts, especially joining more than 2 wires together.
Just ordered an assortment pack based on your review of the Wago 221. Wire nuts are such a PITA with 12ga wire in a box. Wish I had used these before I started switching out the outlets in the house. They for sure will be used on the rest of it. Thanks!
EXACTLY! Maintenance/electrician for 15 years+ in America. An electrician in Europe now. Almost nobody here has heard if wire nuts. My initial prejudice was that wire nuts were superior, BUT the Wago 221 is preferable.
Almost no one in Europe has heard of wire nuts? LOL! Twist nuts are better. Wago is easier. When more compact Wago is available, that will add to the "easier", because of space. "preferable" is _not_ "superior". EDIT And, preferable to, who?
One reason I prefer Wago over wirenuts is they take up less volume in a box. I agree with all you said about them also. Yes, they are pricey, but so is your time and a fire due to poor connection! Wire nuts also seem to tend to unscrew when you are stuffing the wires back into a box, depending on how rough you are and the angle of the wings. The push in Ideals are good too, but when trying to use stranded, it is somewhat of a battle to get ALL the strands into the connector, so I ONLY use them when using solid only, but still prefer the Wagos.
@@chrisb6866 do us a favor also by not making condescending comments. If you can't say something nice, keep your damn mouth SHUT! (coming from a journeyman electrician rated for 50Kv.)
I did an addition on my home with all push-in. I had a few that were defective and didn’t hold the wire when stuffing the wires back in the box. I simply used another push-in and they have held fine over the last three years. Since then I went back to wire nuts on my home projects.
Excellent review - My late friend - a master electrician - showed me to strip wire longer - twist with pliers - cut the end off and put a wire nut on. Worked for him - me well.... I hate wire nuts - going to Wago. With stranded wire I often used crimp connectors. BTW neither Home depot or Lowes have Wago in Canada. But my preferred electrical supplier - Gescan does.
I'm a DIY who feels that I am smarter than pros. who insist on twisting nuts!!! I mistakenly got and tried to use the Ideal pushins for a while and hated the way they resisted the pushing and then resisted the pulling when I discovered that I had to make corrections. Your Superb presentation shows why Wago is the best BY FAR ! As for price comparisons, you might point out the savings of the single wago multi-wire connector over multiple wire nut connectors needed (ONE wago can connect five strands of wire, which would require SIX nuts and LOTS OF SPACE). The newer VAMRONE PCS 3 looks expensive at first, but ONE unit can connect two sets of 3 wires. If manufactures of 3 wired light fixtures were smart, they would sell their devices with the PCS 3 already installed on their wires, so that users could install them in their junction boxes in a matter of a 2 to 5 minutes.
Having been a electrical most of my life i have found if you lead the stranded wire over the solid the wire nut will not fail. Yes if you make them the same length it will be as you have showed
@@walterbrunswick In fact my house is 120 years old. So, yes, I get to deal with knob and tube (not fun). But all of a sudden we need to improve the wire nut? I find that funny, and sad at the same time.
@@paulsto6516 because you don't understand the 'details'... materials science, metallurgy, technology IMPROVES, these days quite rapidly... (I've spent a lot of time studying and 'following' progress through the years) there are many flaws with wire nuts, and being in HVAC in a large city, I've seen my share of "pros" anyway, solid wire itself has a number of flaws, including kinking, brittleness due to 'cold working' (this is ESPECIALLY bad when you pre-twist.... like I do..), and "skin effect" Ideally we should be using stranded for everything anyway after learning about this today I will definitely be ordering these through my local electrical supplier I suggest you keep an open mind... if everyone was as resilient to new technologies, we would still be living in mud houses with straw roofs and using washboards
I was watching the ideal championship and yearly done and they are using the ideal ones there so they are pushing to use them! I like the Wago221 for the fact if you need to remove the wire you can release it and easily pull it out!
The thing I learned being an electrician is when using stranded with solid wire is that you lead with the stranded when using wire nuts. I’ve always had good connections by doing so. FYI, light fixture wires are generally 16 AWG or smaller. Wire nuts are actually the best. When the wire is properly secured failure is extremely rare if it happens. Wagos use the tension method just like the stabs for receptacles. That tension over time relaxes to where failure ultimately will happen and the wire comes lose. Wire nuts will never have an issue like that. If a wire nut fails it’s probably do to a bad installer, not the product. Talked to enough electricians who’ve seen failed wagos all to often. Wagos are convenient, but that’s about all they are.
Contrary is true: Wire nuts fail by system. Any screw nut combination fails with temperature change or vibration without spring lever or glue. Wire nuts are inferior unsafe devices only used by medieval agricultural societies like US. Other world uses hightech german WAGO world market leader All the faults you saw: "If a wire nut fails it’s probably do to a bad installer, not the product."
@@proislam1447 idk I live and work in Florida and have worked on houses with 50 plus year old twist on wire connectors still in the box working just fine. Still as tight as they were the day the got put in in the 70's. Also verified testing shows that twist on wire connectors have lower internal resistance, so they heat up less for the same line current. With a 120v system in a subtropical climate resisting heating is very important from an engineering prospective. For line current applications twist on wire connectors such as Ideal's Wire Nuts are the superior option. Wagos are fine for indoor low amperage applications such as lighting.
@@proislam1447 so far as the Medieval agricultural society. This Medieval society put 12 men on the moon, invented nuclear power, invented the light bulb, invented the internet, the windows operating system, invented the personal computer, invented the smart phone, has the most Nobel Prize winners, and the list goes on. We did all that with electricity using wires connect by twist on wire connectors. Jealousy is an ugly beast freind.
100% Levernuts for lighting! I stopped using wire nuts a few years ago after watching a few UT videos that show which wire device system could handle the most current before failing.
Experienced and Semi-Trained DIY-er here, I had always preferred wire nuts, and was skeptical of push-ins but on my new garage build I went with the WAGO Lever nuts and have been converted! The deciding factor for me was, being a shop, I can see myself adding/moving/changing circuits and devices down the road, and the lever nuts make it super-simple to change things up in the future. The WAGOS were more expensive, but I bought the larger package of them on Amazon and even after wiring up an 1800sq foot Barn/Garage with a dozen circuits, dozens of receptacles, switches, lights and other devices, it looks like I will have a lifetime supply of them leftover for future work...
For solid wire I pre-twist the solid wire and mechanically wind the stranded wire around it in a helix. It takes an extra five seconds but gives a great connection when covered with the tightened wire nut.
Gotta love Wagos, they're a great way to find your breaker! Can't tell you how many times I've come across these where overtime the spring tension has broken down and failed and the wires slip out with very little force. Use wire nuts for the same reason you don't use the back stab ports on a switch/outlet.
I had two projects this week end and use these. For the ceiling lamp I ended up rebuilding the internal wiring so being able to reuse the lever type connector was perfect. The other good thing, that clumsy hanging fixture and trying to use wire nuts experience is gone. It makes installing over head fixtures way, way easier. The other was installing outside GFI plugs, that was far easier. Though relativity expensive the ease of use wins hands down.
Just a Joe, but worked with a pro for a while. I like the wire nuts because of pricing, but would be happy to use wago if that wasn't a factor. Also a trick I found useful with stranded to solid connections lead with the stranded by just a little bit 1/16 or less. The nut will take it first but the solid will still be able to poke thru it and you get good bite on both that way.
Ideal Wire Nut Assortment Pack: geni.us/rL6eVG
Ideal Push In Assortment Pack: geni.us/hoAAH
WAGO 221 (2 Wire): geni.us/TAwOB
WAGO 221 Kit: geni.us/H2Jp
Tools Every Weekend Warrior Needs
Makita Cordless Drill Combo Kit: geni.us/t7dIA
Dewalt Drill Bit Set: geni.us/oFlSl
Dewalt Screwdriver Bit Set: geni.us/VDcr
Craftsman Screwdriver Set: geni.us/jXqFI
Eklind Allen Wrench Set: geni.us/7XfvO
Pliers (4-Piece Set): geni.us/RIdx
Milwaukee Fastback Utility Knife: geni.us/MlyiLk
Stanley Tape Measure: geni.us/bUfD1R
Studbuddy Stud Finder: geni.us/RySCuVw
Johnson Torpedo Level: geni.us/wiLcDY
Stanley Hammer: geni.us/bPDk8Wo
Buck Bros Wood Chisel Set: geni.us/vk3cpTW
Klein Voltage Tester: geni.us/h9Hl
Klein Outlet Tester: geni.us/kdBAJ
Milwaukee Wire Strippers: geni.us/5zuLAbC
Little Giant Ladder: geni.us/fmlmTk
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
I grew up with the plain, no-wing wire nuts, but I'm sold on the wago lever nuts. Your demo on stranded/solid wire behavior was superb. I'm a DIY guy, but also a graduate EE.
The Wagos or push ins have a great advantage when hanging fixtures. The stranded wire from the fixture can be pushed in "on the bench". Then on the ladder you only have to push in the solid wire- very easy!
OK, you just sold me. Having a bad back and standing on a ladder, looking up, AND holding something above my head is a act of self-punishment. Being able to shorten my time in that straining position (I can't even breath normally!) is a blessing I will some extra coins for.
I've been using wire nuts for almost 50 years as a DIY electrician. I converted to Wago 221s recently and I love them. I used all 221s to install new shop lights in my basement including a wall switch and outlet and I feel like it saved me a lot of time. Particularly when I realized I'd mis-wired the switch connection to the lights. I was able to pull the 221s out easily and fix the problem. This is a lot harder/messier when using wire nuts. (nb I learned my DIY electrical wiring up nuclear reactor control systems in my teens. Try meeting NRC code...)
DIYer here, I just bought some push-ins for a ceiling fan project in my garage. They will save some effort doing the final connections while working up in the attic balanced between ceiling joists!
Wago 221 is awesome. I like that they can handle wires of from 24 to 12 gauge, and that they are easy to both install and remove. For a DYI homeowner it just makes projects easier. *I also use them for hobby applications* because they are easier than soldering.
Got a multi-pack of WAGO 221 when installing some lights. They were by far the easiest way to join the high-gauge (18 maybe) stranded wire to solid copper.
Working on renovating my house and I just found these connectors, I can't believe I didn't know about them. These save time, room in boxes, and peace of mind. I will be retiring my wire nuts!
Love me the Wago connectors. Started using them a couple years back, hands down awesome sauce. Easy to use, easy to disconnect, easy to reconnect/reuse.
can't wait to purchase in bulk from my electrical supplier and start using!!
New in agricultural 3rd world country US only.
German Wago is connectors world market leader
I'm a retired remodel contractor, but still do some small jobs. I recently found the Wago connectors I am really liking them. I wish they were around When I was working full-time.
I'm a DIYer and I helped my dad build his house from the ground up. I learned with wire nuts and I like them for what I do. I feel that as long as you use whatever you are using correctly you are fine.
same here i prefer wirenuts, BUT it finally happened to me. working on an old house where previous electrician (should slap him) made a mess. back feeding, reversing wire, adding hot wires where he shouldn't have. old wires (the ones with thread on them) were badly connected. the copper was brittle and pitted. with customer watching and my assistant, wires sparked in from of my face (just like an exploding cigar on cartoons) BAM! customer got scared, assistant starts laughing, i'm not fazed (always wear my face shield) after having a good laugh i cut all the wires but the live ones were too short to pig tail off of. that's where these lever Wago's came in very handy. took 6 hours to complete job plus great learning session for customer and my assistant. the job was to fix an outlet that kept having power then nothing. customer liked the repair that we ended installing recessed light all over the house and mounting a 50 inch TV on the wall.
advice to all out there *"don't try to make a quick buck by doing shoddy work"*
As a DIY'r and having worked for the local utility having seen the cause of house fires caused by incomplete connections heating up to flash over, I have switched to Wago 221's and appreciate your demonstration confirming my choice. I have difficulty with old wire in my 70 year old house which make making connections more difficult.
As a electrician for over forty years .
a properly installed wire nut is by far the best .
I rewired a big chunk of my home over the summer before we moved in, I wish I had known about the wagos then, I’ve been upgrading to smart light switches and have been using them for that and they are so much easier to work with, will be using them exclusively for my garage reno that I’m doing in the Spring
I had put up with wire-nuts for decades.(but on the job in aerospace electronics I used crimp connectors). The first time I saw push-in connectors I immediately switched to them. I see its time again to switch to lever connectors. Thanks!
Can the push-in be reused? I mean, is it possible to remove a stranded wire from the connector? Or once it has been used you need to cut the wires?
@@oaklejant Push-in wire connectors are not really designed for re-use. When you push a wire into one, the metal inside clamps around it to prevent it from pulling out under normal stresses. These new connectors (Wago and similar) instead have a lever. If the lever is up the contact is open and a wire can be inserted or removed. If the lever is down, the wire is clamped in place to prevent removal.
I work in the industrial automation field and Wago Lever Nuts have been a game changer over the past 5 years for our designs and applications. The biggest benefit is the ability to insert test probes and easily remove wires for replacement or troubleshooting.
That would be extremely handy when troubleshooting complex systems 👍
Done several projects. Everyone I know uses them. Very glad I saw your video. Easier, safer, and more compatible; should have been there sooner. Thank you.
Wago connectors are big space savers inside the first box of a series/chain of receptacles.
And, very secure when pushing in all those extra wires.
Building my van I've used them all. Wago's are the way to go if you can't solder. Running 12G wire in a 12v system hooking up LED lights that come with a 24g stranded wire. They are fantastic! Working in construction I've seen all kinds of things. Done by Master electricians. Some are amazing and some are not...lol!!
Great explanation and video... Thanks!
I used wire nuts for 50 years but I'm really sold on the Wago Lever connectors. A big advantage especially when connecting 3 or more #12 wires is that the Wago takes up less space and the wire without the twist is a lot more flexible making it much easier to fit into junction boxes. The Wago Lever is a lot easier to connect additional wire, simply pop levers and install new connector with an additional port while wire nuts usually require cutting the bent up ends off and restriping and twisting.
Makes a lot of sense!!
I noticed that these levers are not designed for repetitive open/close operation. Unless Amazon is selling fakes.
@@myc0p I only have experience with the real thing (221 and 222), and the levers will at least handle dozens of movements !
@@Stefan_Van_pellicom I was test flipping 221 and noticed a deterioration on levers (becoming soft and one stopped working) after 50th use. Didn't see similar behavior on PCT-213.
@@myc0p it is very possible that Amazon is selling fakes. Counterfeit products are a big problem with Amazon right now.
New can recessed lights come with push in connectors attached to the lead wires. I never knew about the push ins until I started installing the lights. After reading the instructions and figuring out how simple it was and finished the installation I got right on Amazon and ordered a 20 pack of push ins 4, 6 and 8 lead connectors for future projects. Fabulous invention.
i started using wagos a few years back and they have become my go to connector. not only are they easy to mount specialy when standing on a stair in god knows what position. but they are also made for fine thread wire. with the plate connection. it makes sure to press down on as many wires as possible.
I started using Wago connectors a couple years ago and I'll never go back to wire nuts. They are BY FAR the best option for any DIYer.
I was taught to use wire nuts.. I did not know about the other connectors. I will start using the Wago 221. Thanks for the information.
Wago 221 lever nuts is all I use from now on. I found them in 2019 by watching another RUclipsr. Thanks for sharing.
Yeah, I think Wago 221 could have a much larger distribution with a little more awareness. Thanks for the feedback.
Just last week saw the suggestion for the wago 221, and ordered some immediately. I've got a recepticle box that I updated the switches in, so it then had 5 neutrals, and originally I had to split it into 3+(2+1) because the wirenuts could at most handle 4. It was basically impossible to stuff everything back inside. The wallplate was visibly floating off the wall where the wires bunched up and the switch bottomed out.
Those wago made everything so much better, cleaner wire runs, low profile, room for 5, and it was actually possible to press it into the back of the box, by moving 5 - 14AWG wires, instead of trying to manipulate what was basically a (1/0) AWG.
Sure its more expensive, but this should be in every DIY's toolbox anyway, ESPECIALLY if they plan to swap out those old toggle switches with something newer like a paddle, dimmer, timer, etc that take up more space in the box.
It's also worth noting that there's a maximum number of wires rated to be used inside of an electrical box due to potential heat/fire hazard. So although organizing the wires may allow you to fit everything inside the box, it may be a wiser idea to replace the box with a larger box.
@@jtrthehax Thats true but red and blue wire nuts are massive compared to some of those small rinky dink boxes people install.
@@jtrthehax - If you're a DIYer like me, this is a terrible idea within a home wall. The idea of taking apart any drywall (or worse, plaster or paneling) to replace a box simply multiplies the work time by a *lot*. How much spackling, sanding, spackle finishing/painting is required after you make the hole big enough to do all this? As a DIYer, I don't know how to put in a new box without radically expanding the hole, and I bet most others don't as well.
I always sodered the stranded wires with rosin core solder and used standard wire nuts. Now I use Wago nuts
DIy Bob K. GREAT VIDEOS
Agreed, WAGO 221 is the best option. They have become very common here in Norway too. Also consider the great benefit, where you can re-open the connections without damaging the wires. Great system.
hi since your up in the north , do you also have 220? if yes how reacts the wago to the difference 110 vs. 220 ? if its melting?
@@xic2365 Hello. We have 230V 50 Hz system in Norway and the continental Europe.
I think there is no specific difference between voltages, it has more to do with the max current loads they can manage to handle before they melts.
@@gahustad2495 thanks 4 the replay. have a good WE
@@xic2365 Cheers, and the same 2U 🙂
You sir by far have given the best description of wire connections. I’m still getting a license electrician for my final inspection. For a breaker box relocation from house to the garage.
I just used Wagos for the first time ever, yesterday and again today. I found them simple and convenient to use. I'm replacing all the switches and receptacles in our 25 year old home with spec grade getting rid of all those cheap back stabbed devices many of which were cracked and had loose connections.
Any spring loaded clip will fail with heat and time Springs do not like heat electricity causes heat the design of the Wego makes a full load of electricity go through the way go instead of from wire-to-wire they will absolutely one-hundred-percent fail no doubt within five to six years
@@gnormanhayes They've been available for well over 10 years in Europe. We've had none of the issues you describe. So, well...
@@gnormanhayes The Metal usually straightens under Heat (reverts back to its original configuration of a Metal Sheet), and Wagos are constructed in such a way that that heat would actually make it press more on the wire rather than get loose. Dont think it cn excert much pressure, but doesnt get loose. In fact overload testing (more than 10x rated load) shows that the Plastic melts away entirely long before the Connection could fail.
Wire nuts #1 and Wago's#2 especially for low voltage. Wago's are especially good for tight boxes. Always tape my connections. Never had a problem. Nice Video. I am not a full time electrician. I just do work on houses I have built. Safety is always a priority concern. Thanks for this video.
Wago connectors are awesome. I even keep a handful in the "junk" drawer in my RV with the fuses for making quick electrical repairs/changes when out camping. The connectors pictured are the new design of the wago. the old ones were great too but the new ones are so much easier to use and about half the size.
I have always used wire nuts because I didn't know there was something else available. I have seen recently the push-in connectors but never liked them because they don't came apart. After watching your video I went to Home Depot and bought some Wagos. I really like them. In older European cars they would use wire terminals that had screw connectors instead of the plugs the American car companies used. I loved that style of connection. So much easier to take apart and rewire if need be. Thanks for the information on the connectors.
We stopped using wirenuts at least 15 years ago in Norway. Wago or other trusted brands are the only thing we use these days.
That’s basically the case with every country other than the US. It’s like paying with checks, no one other than Americans uses them since the 80s lol 😂
would you mind telling us the other trusted brands please?
@@natevirtual hellermanntyton is a brand we have been using without any problems.
@@Faddnn thank you so much!
@@vwlukas the reason why is because people are allowed to sell or buy what they prefer. You can't ban the use of wire nuts if they still work fine as an alternative.
DIY-er. Yesterday I was installing an outdoor light fixture and made the following mistakes: 1) reused older wire nuts as new ones seemed too small. 2) Did not form twists in the wires as shown in the video. 3) Used messy old electrical tape. I have to adjust the light as it did not mount flush, and I will be using the WAGO brand. Thank you so much for sharing this video.
@@HawkeyePierce1981 Thank you! I ended up buying the brand you recommend - I appreciate your feedback.
The thing that has held me back from using the push ins more is I hadn't been certain they were acceptable by code. This answered that question. That said, as a DYI'r I'll definitely opt for a Wago since I do so much less work than a pro that the higher price isn't that much of a bite.
I had seen the WAGO 221 on RUclips awhile ago and decided to order a handful just to see if they were as good as they were advertised. Yesterday, I had my first opportunity to use them and I'm 100% satisfied that are are that good. I had to use them in an awkward situation and they made the job so much easier than wire nuts. They are extremely easy to use and make excellent connections. I have used the push in connector, too but they don't offer the flexibility of being reusable. Once the wire goes in, it won't come out.
I would be an enthusiastic DIYer and was glad I found the wago 221s - they are simple to use, you can see the wire inside and are so slim that they fit into tiny openings; the extra cost is so irrelevant when you have confidence that the wiring is safe and secure.
You better learn how to properly use wire nuts and make proper connections.Wagos suck and are a fire hazard. I have been an electrician for 35 years,had a Masters license for 20.
@@kyzor-sosay6087 thanks for the information, I didn't realize that they had issues; being rated at 32amp seemed good. I will enquire some more. 👍
@@errolmagill1611 They DON’T have issues. It is the best German quality product you can buy, and in Europe they are the ONLY connectors in use. You can use them with great confidence. Don’t be deterred by people who have done things their way for a 100 years and are unwilling to adopt new and better systems.
@@Stefan_Van_pellicom thanks for the reassurance, appreciated. 👍
They are UL listed so they are tested and safe.
I just had a master electrician come in and help me with some stuff I was not comfortable doing. He said as long as you cut your wire to length (as shown on the side of the Wago) and set it in properly, they are completely safe.
I am a DIY'er and once I found the Wago's, I am a big fan and have a package of them in my electrical tool box. They came in handy when we redid the outside lighting at our American Legion Post. The other two guys working (also DIY'ers) were impressed and said that they would probably get a multi-pack of the Wago's.
Scott, I picked up some Wago connectors from Amazon and used them when replacing a couple of switches and dimmers. I love them and will not use wire nuts again. Maybe a little more expensive but well worth it. This is especially true I think for the home DIYer that doesn't need all that many. For an electrician I can see the cost may be more prohibitive. Thanks again for the great review!!
Be careful getting them from Amazon though, they have sold counterfeits in the past
@@natevirtual Wow. Fake cardboard box and everything?
@@gregsmith7391 Yeah, I prefer getting them from reputable sellers
You will be replacing all of those within five to seven years they will all fail juegos do not work I'm an electrician
@@gnormanhayes Most electricians use them here. Are you saying in 5 to 7 years these will all fail in thousands of houses? How could the inspectors pass that? How can the electricians be using them knowing they will all fail in 5 to 7 years? and all these houses will burn down? BTW my 12 year old house is still standing with no problems.
I never heard of Wago until I watched your videos. I just bought some 221's at Home Depot and am excited to use them. I bought a couple of small packages to swap a light fixture and will buy the bigger assortment pack from Amazon. I'm converting to Wago instead of wire nuts!
For light fixtures, or other connection from stranded to solid, I use the WAGO 224 series connectors: Gray (224-101) for Hot, White (224-112) for Neutral (which actually accommodates two solid Neutral wires). They pack easily into the fixture, allow you to 'cap' off the Hot and Neutral from the mains, and allow an easy, safe swap out of the fixture in the future. Just squeeze the connector to insert/remove the stranded wires connected to the fixture.
I’m using wago 221 & 223 for the 1st time and they very grate for DIY’s , who just started doing wiring.
In my opinion another great reason to use WAGO or even push in is the longevity of the wires. Over the years, you will inevitably change switches, receptacles, add devices, or do other things that require "unwrapping" a twist type wire nut. You can do this many times of course, but eventually, the wire either fatigues or just gets so out of shape that it has to be shortened. There isn't always enough spare length. The WAGO and push types are far less damaging to the wire itself.
How and can the push in be removed and or reused? I need to replace a fixture with push in type and it doesn't look like it is removable.
I’m a DIY guy with a lot of experience working on older homes and bringing the wiring up to code. I recently tried the wago connectors. The pain of the price was quickly forgotten after a long day of pulling wire and installing boxes and all I had to do was push the wires into the connector to finish the job.
I love the lever connectors. The first time I used one, I was sold. They are much better timewise than wire nuts. Further, they provide more space in the box than wire nuts.
In 2015 I bought an old mobile home and put in all new outlets and switches. In checking out the requirements/recommendations, due to the MH being wired with aluminum wire, I found Wago connectors were highly recommended. I went to every home improvement store and electrical supplier I could find. Most had no idea what I was talking about. I ended up getting them from a supplier on line and paid more than $3 each piece for them. They were the push in type. It was a large bill for such a project but made the job much easier to do.
I used the Wago lever nuts today, I had a massive amount of wires in one junction box and had to diagnose why not only the lights didn’t work, but the outlets not having proper power and the breaker tripping when the 2nd lightswitch was flipped. I’m not a pro electrician but it was invaluable to be able to swap wires from one Wago to the other to figure out everything without having to restraighten and untwist wires constantly.
Definitely better for troubleshooting
@@gurjindersingh199 Until you find out the Wago was the problem.
@@DrHarryT I'm an electrician. I've been watching some pretty crazy wago videos. They actually impress me now. I still refuse to use them though. Lol.
@@ElkStirrinTheHoney same bro. We call wire nuts marettes here in Canada tho. I just call them wire nuts tho lol
@@DrHarryT thats not gunna be the case. Get what ypu pay for as he showed. But no corporation is going to pony up for the extra cost even tho it saves in labor substantially. So thats why everyone love wire nuts, i use them just to save on wagos when i dont absolutely need a wago.
Thanks... I bought IDEAL In-Sure at Lowe's, but am going for the WAGO 3 port at Menard's. This DIY'r loves you channel.
This is exactly the information I was looking for!. I’m a DIYer and I have to replace some fixtures in my house to get it ready to sell. I HATE wire nuts! I like the idea of having something easy but more importantly secure. The additional cost is worth the peace of mind and the safety aspect. At the end of your video, you suggest DIYers get a Wago Multipack with different sized lever nuts. If you haven’t already... could you do a video explaining what projects or applications would require the different Wago sizes... i.e: 3, 4, & 5 wire lever nut.
Great video! On a side note... I have never saved so many videos from one person!
I had the option to use the push in connecters today, when I had to replace a failed light switch. I used the connecters to add on a couple of 6" pig tail wires, on a very short set of wires coming into the electrical box, which were connected to the old failed switch, with the classic wrap around hook to the terminals. What a difference that made, the push in connecters, were so user friendly, and helped me out greatly. I also upgraded to a commercial switch, with the lock down terminal plates, and had greatly helped with installation of my new added pig tail wires. Thank you so much, for sharing this video!
I am a licensed electrician. I use both wire nuts and Wagos. I have been using Wagos for 10 years without any problems. Wire nuts are fine also. I do find more problems with wire nuts in the field, people miss using or not correctly installing wire nuts. I like the Wagos because I can see the connection. I have had zero problems with them over heating. I use Wagos more than wire nuts.
Hey Drew, appreciate the feedback. Where do you guy your Wagos?
@@EverydayHomeRepairs Menards
I have been using wire nuts. I have experienced the "non-hold" problem. I WILL check out the push-ins because, until now, I never heard of them. Thank you for this video! 😊
I've always used wire nuts and do a pull test. When connecting stranded to solid, I would always solder coat the stranded before mating it with the solid and using a wire nut. Thanks for enlightening me to these other connectors. I'll be using them in the future.
Happy to help and thanks for engaging in the comments 👍
If you just ensure you start with the stranded wire stripped and extended longer than the solid, you can dispense with the solder tinning step. The stranded wire will always wrap around the solid, so it requires more length in the splice, so you just need to allow for that.
Or pay the extra cents for a lever lock, if it's worth the time saved in soldering.
We are a commercial contractor and we use Wago most of the time. A real time saver and always a tight connection.
Thanks for the feedback 👍
I find the greatest advantage for the push types vs the wire nuts is the volume and shape of wire that ends up stuffed into the box. No more twisting into huge, difficult to mold in place stalks of multiple wires. No more or at least less cursing when you find the last person in the box did not leave enough lead. *** But the best effect is that the push types leave more space in your box which means safer heat dissipation and easier access ***. I'n a DIYer who's used all 3, but for my own home I use Wagos.
Having worked as a CCST for a major natural gas transmission company (25 years). I used winged wire nuts 95% of the time. Since cost was not a big factor but reliability was, I went the extra step of putting a tie-wrap at the base of each wire nut. (I also replaced all standard wire nuts with the winged type.) This became my own signature marking my work. I occasionally used both the push wago and lever action wago connectors where I was repairing /updating old work where space was limited and/or wires were a little too short. These devices could be a life saver in time sensitive field repairs. Each have their advantages.
I just finished wiring a room using the Ideal push-in. Easy. If I had the Wago, I would have used them, too. I like the Wago because you can undo the connection.
Can the push-in be reused? I mean, is it possible to remove a stranded wire from the connector? Or once it has been used you need to cut the wires?
I am a professional electrician for 30 years I have been using regular wire nuts and pushing wire nuts for quite some time but these new wago Are a lifesaver saves me time save the customer time so I can move to another job and make me money and keep the customer happy and I know They will be safe
For various reasons, Wago is the way to go for DIY’ers. I’ve been using them for a couple years now. No problems and so much easier. The cost is a factor. I change/add/replace a receptacle or light fixture 3-4 times a year. Well worth the time and trouble trying to get wires tied together and at the moment you push the connection back into the box, a wire pops out!!!
Thank you! Purchased Wago connectors. I definitely see them being used for lights, which need to be removed when painting walls or ceilings.
When I've searched the internet on wire nutting solid and stranded wire here is what I've always found for advice: If you hold the ends of solid and stranded wire even with each other while you screw on the wire nut connector, the stranded wire will often wrap loosely around the solid wires, resulting in a loose connection. The problem is easy to prevent by extending the ends of all stranded wires about 1/8 in. So I think you need to give the wire nuts one more try since you led with the solid instead of the stranded.
Exactly what I came to say. I'm an electrician and always lead with the stranded.
I’ve been trained by my brother electrician. Always did it this way with great results for over 40 years.
His point was that a DIY guy wouldn't have the experience or knowledge to use them correctly. I've already seen a couple comments from pros that said they have to be even when inserted, which might work most of the time but still leaves room for error. He should have identified the correct way to install them for anyone watching that doesn't know though.
Id came to say lead with the standard wire as well im only a dyier
This is why electrical work should only be done by a competent electrician. I used to work with "electricians" who didn't understand why their AFCI kept tripping when they turned something on. 1. Didn't read the instructions, 2. Didn't know how it works, 3. Weren't properly trained. The worst thing is that they think they know what they're doing just like this guy. I definitely wouldn't want to have a large window AC running on this type of connector anywhere in the circuit. But I would with a properly installed Wirenut.
I have been using the ideal push ports for over 5 years. I have the 2 ports up to 8 ports. I've had one problem out of thousands of terminations! I really like how you showed the wire connection inside the port, which is the main problem of people not installing the wire in the ports properly.
When I install light fixtures using 14 Guage and stranded wire, I prefer the smaller orange wire nuts.
I'm closing on my first house later today and you've really opened my eyes to a difference in electrical component quality that I didn't know existed. Between the wago flip nuts and commercial grade recepticals, I'm going to be replacing all of them with the higher quality. You're amazing.
Wire nuts are the best.. They use copper in the wire to make the bond . Wago uses a dissimilar metal buss bar which over time will corrode from Galvanic corrosion...
With WAGO Alu-Plus Contact Paste, you can connect aluminum and copper conductors using WAGO's connectors - quickly, easily and reliably.
Love Wago. Buddy of mine is having his older home re-wired and spec'd Wago connectors in all boxes.
Back in 2014 I was renovating a part of my home, and saw a review of the Wago lever-nuts. I fell in love with them because I have been that poor schmuck who had to unscrew a 3-way nut to add one more wire, and then a week later had to unscrew the 4-way nut to add one more wire. So the idea of being able to quickly fix that was very attractive. I bought a bunch of the lever-nuts, I still have them, and I encourage everyone I know to use them. My only complaint is, as you point out, they're somewhat fat. So when the box is already tight it can be a chore to get things arranged. In particular, the "smart" thermostats for electric radiant bathroom heat are a stone bitch to fit into a small metal box. But it CAN be done. (Just make sure you charge by the hour for this.)
I've always used wire nuts for my installations. I've never heard of the wago connectors. I am very impressed and will start using the wago.
I've always had problems with unsecure wire nut connections and would usually wrap then with electrical tape to secure them better. The wago is a much better connection.
Thanks foe this video.
Wire nuts fail by system.
Any screw nut combination fails with temperature change or vibration without spring lever or glue.
Wire nuts are inferior unsafe devices only used by medieval agricultural societies like US.
Other world uses hightech german WAGO world market leader
The 221 also has test port to check without removing the wires
Great point and thanks for calling that out. The IDEAL push in connector also has the integrated test port. 👍
WOW Amazing...Then again doesn't the wire nut have one at the bottom where the wires go in too?
222 has them too.
@@Stefan_Van_pellicom and the "grip" of the 222 versus the 221, coupled with the fact that they're more compact than the 221has me using the 222s.
@@DrHarryT do you mean reaching in and touching the wires via the bottom hole?
I have used Wago and alternatives that look identical on Amazon and both work very well. I bought the alternatives by mistake becasue when you search for Wago on Amazon it offers alternatives that look almost identical and to be honest they work just as well. Its the concept that is so elegant.
Check to see if the alternative is UL approved. It could have ramifications down the line....
All have their pros and cons but something to keep in mind: The lever nuts may save enough in labor to make up for the cost. If you're going to use lever nuts, use Wago. They're UL listed and, if it matters to you, the 221 has a test point so you can check voltages without taking it apart. No matter what you use make sure it's rated for the amperage you're dealing with.
Appreciate the comments and feedback!
Wire nuts go on so fast that any labor savings would be negligible. Truth be told I'm not convinced the lever nut is actually any faster at all.
@@Steve_Edberg Yeah, that's probably true for someone that does it a lot. I use the lever nuts in 508A panels because most customers will pitch a blue fit if they find a wirenut in the wireway but glance over a lever nut.
@@Steve_Edberg little tip if you're working with solid wire, lever nuts also function as push connects. Only have to use lever function to remove wire. Saved tons of time as a filthy DIYer
The test point feature of the 221 is a good idea in concept but poor in execution, because the opening is too small to accommodate all DMM test probes.
If you do use that feature, make sure the probe tips are narrow enough to go through the opening and contact the conductor. A lot of the probes I've tried are too wide to get through without forcing it in enough to displace the plastic. Once it's been sufficiently enlarged that way, it'll work fine.
Otherwise you could get a false negative reading and think your circuit is deenergized.
As a DIYer i used the 222 in one of my friends house and it worked very well as idid the whole house. The 221 was not available at that time. But, certainly will buy some if available at the Home Depot.
I adore those Wago lever-nuts. I've been using them in wiring up LED lighting for several years and they are so much more secure when you can use them.
Thanks for the feedback Orson 👍
Just used the wago's and unless you like standing on a ladder these things are spectacular. Perfect for led lighting projects and super fast.
Thanks for the informational. Very helpful. I have found that by making the stranded wire slightly longer than the solid copper and pushed into the twist cap ahead of the solid copper gives me a firm connection. Again thanks and keep it coming.
I've used the twist connector and the ideal, but bot the lever style. I'm a hybrid in experience. I'm a do it yourselfer, but with municipal electrical maintenance and construction experience. I also worked under a contractors license for a company. So, for my own experience, i like the ideals and lever style connectors. However I so like the 20A receptacle push in connectors with screw tightening. Good analysis. Thanx
I have one more comment on Wago push in wire connectors. Lets say I rough wire receptacles in a basement. I install the Wagos at roughin. I can test the circuit to make sure I have power at the end and then disconnect it from power while the drywall guys do their work. I then pig tail my receptacles. When its time to install the devices each device takes much less time to install than having to use wire nuts. I like the time these save me.
Installing a wago is ten times faster than a wire nut.
And the wago is still good, while the wire nut is supposed to be loose after some years
I've used wire nuts for a long time as a DIY'er and never did like the way stranded wire behaved in the connection. I also don't like using stranded wire in push in connections as they can fray far too frequently for my comfort level. I recently learned about Wago connectors and like their methods. Our Home Depot here in BC Canada actually has them. Very cool and if I have another DIY project, especially with light fixtures, I'm going to use them.
The first time I saw a Wago connector and tested it, i was sold particulary since it has all the right agency approvals too and used for decades in Europe. As a homeowner, my repair needs are spotty, and this provided rapid to do, and undo, quality connections, UL approved and next to no training required. The real challenge I find is to insure its not counterfeit, when buying it from say, Amazon over DigiKey, authorized distributors matter here and the difference per item is only in the 10-30c a piece.
I'm a DIYer who has done new, rewire, and pigtail copper onto aluminum in residential in multiple homes. I have a free supply of assorted wire nuts that I'll use until I run out, but once I do, I'll switch to using Wago's. They're so much easier to install!
Nothing replaces just doing every task properly. So great for these more safe options for those who for what ever reason have a hard time doing things properly or even carelessly.
Yeah, gotta love the exaggerated infomercial approach.
Yeah, my ceiling fan/lite: was troublesome with wire nuts/ gonna try wago lever clips, due to your excellent comprehensive video. THANKS, A DIY-ER
I ordered the assortment from Amazon via the link above. For me to be able to easily do electrical projects safely myself is worth it, way cheaper than calling an electrician. Who cares if the connectors cost 50 cents each, I won't use that many as a homeowner. Thanks for doing this video...I've always had trouble using wire nuts, especially joining more than 2 wires together.
Just ordered an assortment pack based on your review of the Wago 221. Wire nuts are such a PITA with 12ga wire in a box. Wish I had used these before I started switching out the outlets in the house. They for sure will be used on the rest of it. Thanks!
EXACTLY!
Maintenance/electrician for 15 years+ in America.
An electrician in Europe now. Almost nobody here has heard if wire nuts.
My initial prejudice was that wire nuts were superior, BUT the Wago 221 is preferable.
Almost no one in Europe has heard of wire nuts? LOL! Twist nuts are better. Wago is easier. When more compact Wago is available, that will add to the "easier", because of space. "preferable" is _not_ "superior". EDIT And, preferable to, who?
I'm so glad you said you liked the back trace method of hooking up outlets and switched. I used that style of hook ups for all the outlets I changed
One reason I prefer Wago over wirenuts is they take up less volume in a box.
I agree with all you said about them also. Yes, they are pricey, but so is your time and a fire due to poor connection!
Wire nuts also seem to tend to unscrew when you are stuffing the wires back into a box, depending on how rough you are and the angle of the wings.
The push in Ideals are good too, but when trying to use stranded, it is somewhat of a battle to get ALL the strands into the connector, so I ONLY use them when using solid only, but still prefer the Wagos.
do us all a favor, and don't do electrical work...
@@chrisb6866 do us a favor also by not making condescending comments.
If you can't say something nice, keep your damn mouth SHUT! (coming from a journeyman electrician rated for 50Kv.)
I did an addition on my home with all push-in. I had a few that were defective and didn’t hold the wire when stuffing the wires back in the box. I simply used another push-in and they have held fine over the last three years. Since then I went back to wire nuts on my home projects.
yes, chinese junk rebuilds are beaten by unsave medieval wire nuts
Excellent review - My late friend - a master electrician - showed me to strip wire longer - twist with pliers - cut the end off and put a wire nut on. Worked for him - me well.... I hate wire nuts - going to Wago. With stranded wire I often used crimp connectors.
BTW neither Home depot or Lowes have Wago in Canada. But my preferred electrical supplier - Gescan does.
I'm a DIY who feels that I am smarter than pros. who insist on twisting nuts!!! I mistakenly got and tried to use the Ideal pushins for a while and hated the way they resisted the pushing and then resisted the pulling when I discovered that I had to make corrections. Your Superb presentation shows why Wago is the best BY FAR !
As for price comparisons, you might point out the savings of the single wago multi-wire connector over multiple wire nut connectors needed (ONE wago can connect five strands of wire, which would require SIX nuts and LOTS OF SPACE).
The newer VAMRONE PCS 3 looks expensive at first, but ONE unit can connect two sets of 3 wires. If manufactures of 3 wired light fixtures were smart, they would sell their devices with the PCS 3 already installed on their wires, so that users could install them in their junction boxes in a matter of a 2 to 5 minutes.
Having been a electrical most of my life i have found if you lead the stranded wire over the solid the wire nut will not fail. Yes if you make them the same length it will be as you have showed
Common sense in action. two thumb up, Mr. Breaker!
@@paulsto6516 I hope you are still using knob and tube wiring... I don't trust this 'Romex' nonsense
@@walterbrunswick In fact my house is 120 years old. So, yes, I get to deal with knob and tube (not fun). But all of a sudden we need to improve the wire nut? I find that funny, and sad at the same time.
@@paulsto6516 because you don't understand the 'details'...
materials science, metallurgy, technology IMPROVES, these days quite rapidly... (I've spent a lot of time studying and 'following' progress through the years)
there are many flaws with wire nuts, and being in HVAC in a large city, I've seen my share of "pros"
anyway, solid wire itself has a number of flaws, including kinking, brittleness due to 'cold working' (this is ESPECIALLY bad when you pre-twist.... like I do..), and "skin effect"
Ideally we should be using stranded for everything
anyway after learning about this today I will definitely be ordering these through my local electrical supplier
I suggest you keep an open mind... if everyone was as resilient to new technologies, we would still be living in mud houses with straw roofs and using washboards
@@walterbrunswick TLDR; Is it OK with you if I continue to use Wire Nuts?
I was watching the ideal championship and yearly done and they are using the ideal ones there so they are pushing to use them! I like the Wago221 for the fact if you need to remove the wire you can release it and easily pull it out!
The thing I learned being an electrician is when using stranded with solid wire is that you lead with the stranded when using wire nuts. I’ve always had good connections by doing so. FYI, light fixture wires are generally 16 AWG or smaller.
Wire nuts are actually the best. When the wire is properly secured failure is extremely rare if it happens. Wagos use the tension method just like the stabs for receptacles. That tension over time relaxes to where failure ultimately will happen and the wire comes lose. Wire nuts will never have an issue like that. If a wire nut fails it’s probably do to a bad installer, not the product. Talked to enough electricians who’ve seen failed wagos all to often. Wagos are convenient, but that’s about all they are.
Contrary is true:
Wire nuts fail by system.
Any screw nut combination fails with temperature change or vibration without spring lever or glue.
Wire nuts are inferior unsafe devices only used by medieval agricultural societies like US.
Other world uses hightech german WAGO world market leader
All the faults you saw:
"If a wire nut fails it’s probably do to a bad installer, not the product."
@@proislam1447should read "if a wire nut fails it was done by a bad installer", not do-
@@proislam1447 wire nuts are superior, that’s just a fact
@@proislam1447 idk I live and work in Florida and have worked on houses with 50 plus year old twist on wire connectors still in the box working just fine. Still as tight as they were the day the got put in in the 70's.
Also verified testing shows that twist on wire connectors have lower internal resistance, so they heat up less for the same line current. With a 120v system in a subtropical climate resisting heating is very important from an engineering prospective. For line current applications twist on wire connectors such as Ideal's Wire Nuts are the superior option. Wagos are fine for indoor low amperage applications such as lighting.
@@proislam1447 so far as the Medieval agricultural society. This Medieval society put 12 men on the moon, invented nuclear power, invented the light bulb, invented the internet, the windows operating system, invented the personal computer, invented the smart phone, has the most Nobel Prize winners, and the list goes on.
We did all that with electricity using wires connect by twist on wire connectors. Jealousy is an ugly beast freind.
100% Levernuts for lighting! I stopped using wire nuts a few years ago after watching a few UT videos that show which wire device system could handle the most current before failing.
I can't believe I never saw these push in connectors before!
Great video. Thanks!
Thanks for watching!
Experienced and Semi-Trained DIY-er here, I had always preferred wire nuts, and was skeptical of push-ins but on my new garage build I went with the WAGO Lever nuts and have been converted! The deciding factor for me was, being a shop, I can see myself adding/moving/changing circuits and devices down the road, and the lever nuts make it super-simple to change things up in the future.
The WAGOS were more expensive, but I bought the larger package of them on Amazon and even after wiring up an 1800sq foot Barn/Garage with a dozen circuits, dozens of receptacles, switches, lights and other devices, it looks like I will have a lifetime supply of them leftover for future work...
If you have a lifetime supply left over, you're no DIYer.
I love the wago 221 because they are rated up to 30 amps and will connect from 10 to 20 AWG solid or stranded wire.
Can you use more than one wire into an entry port ?
Many times you run across numerous neutrals.
For solid wire I pre-twist the solid wire and mechanically wind the stranded wire around it in a helix. It takes an extra five seconds but gives a great connection when covered with the tightened wire nut.
Gotta love Wagos, they're a great way to find your breaker! Can't tell you how many times I've come across these where overtime the spring tension has broken down and failed and the wires slip out with very little force. Use wire nuts for the same reason you don't use the back stab ports on a switch/outlet.
I had two projects this week end and use these. For the ceiling lamp I ended up rebuilding the internal wiring so being able to reuse the lever type connector was perfect. The other good thing, that clumsy hanging fixture and trying to use wire nuts experience is gone. It makes installing over head fixtures way, way easier. The other was installing outside GFI plugs, that was far easier. Though relativity expensive the ease of use wins hands down.
Just a Joe, but worked with a pro for a while. I like the wire nuts because of pricing, but would be happy to use wago if that wasn't a factor. Also a trick I found useful with stranded to solid connections lead with the stranded by just a little bit 1/16 or less. The nut will take it first but the solid will still be able to poke thru it and you get good bite on both that way.
That's my technique also. Twist the wires, but make sure the stranded is sticking out past the solid. Then put on the nut.