I am in Western NEW YORK i have over 2 feet in snow in my driveway .. temps below -0 degs fahrenheit been a rough winter .. most of the time my shop is warm good old firewood ..
I worked with a couple guys from Poland and Russia when I was a draftsman at GM and I have to say that they were all the smartest guys there. Very nice design and build.
nicely done and nice use of an old electric wheelchair with the Tilt Chair function and a hot water heater . just an FYI you wanna put your plow blade down onto at ground (like right as you come out the garage ) so you can get more slow pushed away ( retired plow truck driver) and tilt your lights a lil up ya dont want them facing down raise like half an inch just a suggestion so you can get better plow coverage and better lighting .
Nice work. I would never need anything like this because it only snows here once every 20 years or so. If there is a dusting of snow on the roads, we shut down everything around here. Well, not the bars or churches but definitely the schools.
Excellent! However I do think that you need a tilting mechanism for the blade to change it's angle off attack to the ground. I discovered that when I made my own unit. Three adjustment profiles are needed. 1) Entire blade up and down 2) Blade side to side angle , and 3) Blade to ground angle. I also employ hydraulic pressure to keep the blade down so that it doesn't lift and bounce over ice, but cuts through them.
Heyyy...thats a really useful snowplow. I built the same thing, a while ago. But as an attachement for the Forklift. I was able to utilize the hydraulic side shifter to swing the plow left to right. Driving a snow plow is so much fun. xD ....Cool project...Greets from Germany.
awesome work and nicely integrated into the dump chassis. now you need some lifepo4 cells and a bms instead of the old lead acid battery. lighter and all 100% useable instead of 50ish% on lead acid
Excelente proyecto muy bien desarrollado y mejor ejecutado , da miedo ver ese quitanieves , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 🛠️
The best scene is in the street. Everything works. But in my opinion, the hitch system is too long and unstable, the lifting system works, but it does not ensure the plow's pressure to the ground, I do not know, maybe this is the assumption not to damage the thin rubber skid, I would make myself of a thicker rubber. I like the idea of the vehicle, and I can immediately see here a horizontal rotating brush for sweeping the yard and sidewalk. Greetings from Poland :)
Make and sell the base units like the one seen here, then make/sell quick change attachments like: this plow, posthole diggers, single stage snow blowers, etc. I'd start with patent issues, and go from there. *Great job/lots of potential.*
Those flashlights would've been a must in Sweden because in the southern Norrland region you get 5-7 hours of daylight while in northern Norrland region you get 2-4 hours of daylight.
Если бы такого качества отвалы были бы в магазинах, то было бы понятно почему так дорого стоят... Сколько возни, сколько нужно инструментов... А так хорошая работа!) Зимний вариант домашнего польского Прайма))) (Это который из трансформеров Оптимус Прайм)
So... next winter there will be an automatic loading function for the bucket... 🤔😎 Great job man, as so many times before. Really like this channel, keep up the good work.
That's pretty cool. I must say I'm the type of person who is a little lazy. I would have to have something I could ride. No disrespect now that's just me. 😀👍
Very nice work. Perfect for flat ground. Unfortunately, I live on a mountain side (in Mongolia) and I'm trying to figure out how to move snow on uneven ground and a side slope. So far, I've only been able to use shovels which is really hard work. The snow pack has been quite deep this year (about 50cm). I could make something better, use standard shovels or just wait 2 weeks and most of it will be gone from solar melting.
Cześć Dariusz, wyszło wizualnie super :) jednak efekt, jak to działa - taki sobie. 1. Za słabo dociska do ziemi, nie zgarnia po kostce. Zostaje sporo śniegu pod pługiem. 2. Giba sie na tych spręzynach za bardzo. 3. Masz traktorek, mogłeś zrobić prezentację z nim. NIeraz nawet qudami po chodnikach odśnieżają.
You got the snow dump too I see. Nicely done and just in time.👍
Maybe the 4x4 UTV needs a snow plow :D I need all the good plow blade ideas i can get lol ;)
ma ei tea kuidas lõunas lood aga keskel lund üüratult palju ..seega ruttu uus video teele ka sinu poolt .... :D
I am in Western NEW YORK i have over 2 feet in snow in my driveway .. temps below -0 degs fahrenheit been a rough winter .. most of the time my shop is warm good old firewood ..
@@JeffPedlow Donn DIY did build a plow for the UTV 2 parts ..
Thanks Donn 😉
GREAT use of a discarded hot water tank. I love your ingenuity!
Poland has brilliant mechanics and some of the best pilots on the planet.
Poland is also known for its beautiful women ;)
I worked with a couple guys from Poland and Russia when I was a draftsman at GM and I have to say that they were all the smartest guys there. Very nice design and build.
How I wish we had one of these growing up, it surely would've saved a lot of backache and would've had more time for play!!
AWESOME BUILD!! 👍👍
What? You mean all that time shovelling snow when I was a kid wasn't playing outside like my parents said it was? 🤔
@@Crewsy Wayne, all these years, I'm afraid you've been lied to😲Wait a min, are your parents...
REALLY YOUR PARENTS 🥺🥺🤪
@@silvergrizzly316 🤷🏻♂️
🤣😂🤣😂
Very awesome! Genius use of an old water heater....got me thinking about trying something like this for my riding mower. Thanks for sharing!
Matko Bosko Częstochowsko niedługo czołg zbuduje 💪
oby !!!!!!! czekam !!!!!!☺☺☺☺
czolgow jest duzo, wolalbym ladowarke z filmu obcy 2 :D
Zbuduj sam dom - ja już kiedyś pisałem że On jakąś rakietę zmajstruje, i czekam na nią jak na zbawienie 😂
Przydałaby się jakieś uzbrojenie. Podobno wojsko wysłało wszystkie czołgi na granicę z Ukrainą, obydwa.
@@Sesek1111 xD
Jestem pod wrażeniem kusztu konstrukcyjnego. Jednak bym go zmodyfikował, lepiej jeździć niż chodzić 😁.
👍👏
Pewnie prototyp😀👍
To może "Izera" jest?😁
Poczekaj aż połączy wszystkie projekty w jeden :D
Very neat construction and it looks necessary there in Poland at the moment. Well done.
I like how well built it is!
I have an old hand tractor that I've been considering making a plow for: you have inspired me to do just that. Awesome video as usual *Made in Poland*
nicely done and nice use of an old electric wheelchair with the Tilt Chair function and a hot water heater . just an FYI you wanna put your plow blade down onto at ground (like right as you come out the garage ) so you can get more slow pushed away ( retired plow truck driver) and tilt your lights a lil up ya dont want them facing down raise like half an inch just a suggestion so you can get better plow coverage and better lighting .
Good job. Well done. I think the next level is to build a homemade mini excavator for garden jobs.
Great job, thank you brother. You are so talented
Nice work. I would never need anything like this because it only snows here once every 20 years or so. If there is a dusting of snow on the roads, we shut down everything around here. Well, not the bars or churches but definitely the schools.
I’ve never heard a dog bark in Polish before. That was so cool. :)
Cała okolicę teraz chłop odśnieży 🥰
Akurat śnieg topnieje 🤣
Awesome repurposing, this is the kind of recycling I love most! The most efficient way, too.
Excellent! However I do think that you need a tilting mechanism for the blade to change it's angle off attack to the ground. I discovered that when I made my own unit. Three adjustment profiles are needed. 1) Entire blade up and down 2) Blade side to side angle , and 3) Blade to ground angle. I also employ hydraulic pressure to keep the blade down so that it doesn't lift and bounce over ice, but cuts through them.
Best thing about it is that you won't wake up your neighbours while plowing snow in the morning!
:-D
Great addition to the e-wheelbarrow!
:-D
Прекрасная работа. Молодец. Золотые руки. 👍👍👍👋👋👋🤝🤝🤝
Heyyy...thats a really useful snowplow. I built the same thing, a while ago. But as an attachement for the Forklift. I was able to utilize the hydraulic side shifter to swing the plow left to right. Driving a snow plow is so much fun. xD ....Cool project...Greets from Germany.
Супер!! 👍👍👍
Это как раз по нашей зиме 😊😊😊
MY friend YOU ALWAYS AMAZE ME WITH THE VIDEOS U PUT OUT 🙏🏼🙏🏼🙏🏼 .. THANKS 👍🏼👍🏼
Zacne wykonanie.Musisz być ulubionym klientem lokalnego składu stali,bo przy takiej ilości projektów chyba jesteś tam częstym gościem😉
That cylinder would make an awesome barbecue, too - but weather permitting!
Boy, I could've used that yesterday! Nice job as always.
It Would be cool to see your design progress for all these cool projects. Thanks
Well considered and nicely made.
Good job! 🙂👍
Awesome work, dude! Nicely done!!! 😃
Stay safe there with your family! 🖖😊
Not bad at all.... I like how you keep it simple and that it works for you.
One word describes this, INGENIOUS! It is definitely, 'Think outside of the box.
Всегда сделано профессионально с творческим подходом!!!!!
awesome work and nicely integrated into the dump chassis. now you need some lifepo4 cells and a bms instead of the old lead acid battery. lighter and all 100% useable instead of 50ish% on lead acid
Meu amigo você é um gênio, parabéns sou teu fã.
Sou do Brasil...um forte abraço.
Super cool video man & great design. I live on the land and plough my own snow roads.....
I need this thing badly in Canada! 😄👍🏼
Tyle roboty a tu roztopy :-), a tak na serio to fajny projekt!
The best part is that if you need more traction you can add more batteries!
Nice work 👍, looks great.
Хорошо, когда есть где спиздить такой классный баллон)
Excelente proyecto muy bien desarrollado y mejor ejecutado , da miedo ver ese quitanieves , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 🛠️
Useful tool for this season of the year ❄️
This plow would be even better if you could put tracks on it. Really nice construction, I have watched all of your RUclips videos.
Bardzo ladna robota, mala porada, punkt mocowania na szufli obnizylbym do dolu , pozdrawiam
The best scene is in the street. Everything works. But in my opinion, the hitch system is too long and unstable, the lifting system works, but it does not ensure the plow's pressure to the ground, I do not know, maybe this is the assumption not to damage the thin rubber skid, I would make myself of a thicker rubber. I like the idea of the vehicle, and I can immediately see here a horizontal rotating brush for sweeping the yard and sidewalk. Greetings from Poland :)
Ta platforma samojezdna powinna nazywać się M.O.P.S.-Mobilny Okołodomowy Pojazd Samoróbka.👍👏 pozdrawiam
Super nazwa 😁
Continuously impressed by your work
Another nice product...! 👍
Молодец поляк. Толковый мужчина.
Nice JOB BROTHER I AM YOUR BIG FAN FROM NEPAL😎
Thank you from Saudi arabia
Wielki szacunek dla Pana za pomysł ✋✋✋✋✋
Make and sell the base units like the one seen here, then make/sell quick change
attachments like: this plow, posthole diggers, single stage snow blowers, etc.
I'd start with patent issues, and go from there. *Great job/lots of potential.*
Осталось дело за малым... Приварить площадку и перестать ходить за этим чудо-агрегатом. )))
Wish I had a shop with all the tools..could I make stuff!
Great! now this thing can be sent to Mars 😂
Brillian as always 💪
Super !!! 😁
Я хочу сделать это, но здесь нет снега, только кубики льда из холодильника 🙏👏😀😀😀😀😀
Those flashlights would've been a must in Sweden because in the southern Norrland region you get 5-7 hours of daylight while in northern Norrland region you get 2-4 hours of daylight.
everything you make looks professional masterpieces
Если бы такого качества отвалы были бы в магазинах, то было бы понятно почему так дорого стоят... Сколько возни, сколько нужно инструментов...
А так хорошая работа!) Зимний вариант домашнего польского Прайма)))
(Это который из трансформеров Оптимус Прайм)
bravo i miei complimenti ,un ottimo lavoro,peccato che dove abito io non nevica piu!ciao!
Нижняя часть должна выдвинута в перёд по отношении верхней, всё проверенно
thats cool, youve got time to grab a coffee while the blade changes direction.
Jak ja żałuje że nie mam takiego sąsiada😉
. THATS BADASS & QUIET
Nicely done!
Thanks!
Игрушка для взрослых мальчиков ;)
Удачи, так держать!
Great tool! Good job.
You done an excellent job on this product. How ever the plow i way to heavy and rugged for a driveway. it would be fine for leaving dirt/gravel.
Столько сил .... И умения . А в конце эта смешная повозка .
So... next winter there will be an automatic loading function for the bucket... 🤔😎
Great job man, as so many times before. Really like this channel, keep up the good work.
You are an artist
That's pretty cool. I must say I'm the type of person who is a little lazy. I would have to have something I could ride. No disrespect now that's just me. 😀👍
Veľmi pekná robota.
Good job mister well done
Wow congratulations, very good job my friend ,😊👏🔝👍
Very nicely your diy
Thank you
You are my best fan a long time ago because I'm sure all your sit made can work is not only for so😊😊😊
I mean what is it you CAN"T do? LOL. Awesome just awesome as hell!
Gdy mama mówi żebyś w końcu wziął i coś zrobił a nie tylko siedział w domu xD :D
Very nice work. Perfect for flat ground. Unfortunately, I live on a mountain side (in Mongolia) and I'm trying to figure out how to move snow on uneven ground and a side slope. So far, I've only been able to use shovels which is really hard work. The snow pack has been quite deep this year (about 50cm). I could make something better, use standard shovels or just wait 2 weeks and most of it will be gone from solar melting.
If you get desperate for more Zn, it's used in water heaters as a means of protecting the inside of the tank from deposits of minerals.
Nice work!
Great job bro 👍 looks nice
Szanuje za umiejętności♥️
Great job sir!!
Great idea
Panowie super robota!!
@Made_in_Poland1..... Thank you😁 I already wrote a PM on messenger😉
Dodaj podest i Grenlandia jest Twoja :D
Ogólnie robota PrimaSort
oby tak dalej
Jak zwykle w samo sedno ;)
Elegancko 👍🏻👍👍🏽
Cześć Dariusz, wyszło wizualnie super :) jednak efekt, jak to działa - taki sobie.
1. Za słabo dociska do ziemi, nie zgarnia po kostce. Zostaje sporo śniegu pod pługiem.
2. Giba sie na tych spręzynach za bardzo.
3. Masz traktorek, mogłeś zrobić prezentację z nim. NIeraz nawet qudami po chodnikach odśnieżają.
Nie marudź
@@MichSC To tylko moje zdanie. Trzymam kciuki za chłopaków z kanału by zdobywali jak najwięcej subskrypcji :)
simple, what did you do after lunch?
We have a 6' light truck plow adapted to bolt on to the bucket of our tractor.
Осталось поставить мозги от робота пылесоса и пусть сам территорию убирает)))
👍🏻 Удачи
good job
Z takiego baniaka była by piękna wędzarnia :D
Years back I built one a bit bigger fits the back of my W6 tractor hyd. Lift can be tilted 45 deg either way
КРАСАВЧИК!!!🖐😉👍🇷🇺 попробую сделать похожее!!!
Super awesome 👏