Custom Snowblower build on a tractor's loader - Part 2
HTML-код
- Опубликовано: 25 окт 2024
- For plans and Merch!
57design.ca
OR
Etsy:
www.etsy.com/c...
Snowblower PART 1:
• Custom Snowblower buil...
Vevor PTO shaft used for this project:
s.vevor.com/bf...
Austin Coulson:
/ @austincoulson
![Megan Thee Stallion - Bigger In Texas [Official Video]](http://i.ytimg.com/vi/QxTkZTLWdo4/mqdefault.jpg)
So freaking cool. You are the man, Viny. I could have only done about half the stuff in that video. I probably would have driven the blower with a hydraulic motor because my machining skills are way behind yours. I can't believe how cool that turned out. Huge props.
My man! Thanks AC! I tried to K.I.S.S. that snowblower and resist the urge of putting a secondary engine on it!
@@VinyB57 having that assembly with the clutch already on it was awesome
@@VinyB57
I want to do everything electric now. Mainly because the pto is an electric cord.
But…I’m on the k.i.s.s. therapy prorgram!
😜👍
A lot cheaper lol
To be able to fabricate all this stuff from basically scratch is nothing short of genius in my opinion.
Well thanks Chad!! 👍
Yay, another Viny video! I especially love the clearance "mouse bites" on the pto pulley for the mounting bolts. That pully looks like artwork. 👍
I'm 100% with you...It's kinda sad that it lives far inside the cab now...nowhere to be seen!
From a fellow Canadian with a rear mounted blower, great job! I just subscribed.
So glad I found this channel! I love your sense of humor. Keep it coming!
Thank you! Will do!
The humor in your videos, Vinny, it's great. I actually laughed out loud when you dropped the camera into the plastic pulley and, poof, it was aluminum. Really good production quality!
Thanks Ryan, glad you liked my magic trick! 😅
Hard to imagine a world where having the snow blower on the front isn’t the better option by far! This is a dream machine. Well done 👍
Thanks Kyle
Turned out awesome!
Can’t beat spending time in the shop making things that help make chores easier and more fun.
That's the funny bit about it...Here in Canada, big snowstorms are like going into war, not literally, but, you suit up, kiss your wife and kids goodbye and tell her to call the police if you're not back in 4 hours, it's a lot of work and thinks break on you, all the time...but not anymore.. 🤷♂️ it's now a 30min job...😲
Very good watching Viny (the Canadian) B. More stickers please (the safer the better) and some great gags in there, 😂!
Hey thanks man!
HAHA, nice, you're my hero....It took me all summer and Fall to fix up a Kubota, one bit at a time...still a basket case. It always looks easy in a video, not real life.
100% with...way harder in real life!
Awesome, many thanks for this.
My pleasure!
Your work is always amazing, keep it up💛👍🏼
Thnaks man! 👍
Nice build.........now you will need a cab to keep from eating the snow. GREAT VIDEO
Thanks gary, yep your right about the cab!
Thans for your project video's in 2023! Best wishes for 2024 and many more projects! (If you can find the time!)
Very nice build Vinny. Thank you for the videos.
Glad you like them!
Ah... The "Fin" episode of the snow blower project, as a Canadian... I like that Canuck touch you used for the control levers. 👍
Me too! 😉
Always great work and great humor
Brilliant work again Viny, hugely enjoyable!
Excellent work! And hilarious content too
Thanks, gald you lied it!
Love your videos man, great humor, and great work. Keep it up!
a really great build !! thanks for sharing !
Glad you like it!
well done i like the ferguson upgrades :D
Awesome video 💪
Great build!!
Thanks!
Impressive build all around Viny!
Thoroughly enjoyed the videos. Did a similar sort of mod for a rear drive blower to a loader mount for my Massey 1742. Made it similar to a Schulte rear drive front blower. I'll get back to you on E Mail with pics if you're interested.
I'm just realizing you only have 67k followers.....
You're like one of the three or four channels I really get excited when new material is posted. I love this channel and I wish you keep doing all your glorious work.
❤
Well Im just at 61.6k...not even 67k yet 😅
@@VinyB57 oh my 🫣
Nice job! Excellent fabrication skills. I did something similar with an old combine. I used wheels instead of the factory skid plates that were on the blower and so far have been very happy with them to avoid scarfing etc. Also, huge to be able to look ahead, saves the neck!
Oh yeah! Saves the neck big time! I'm thinking about installing a backup camera too...the ultimate neck savier 😅
Awesome work Viny! I think you shared some gravel with your neighbors too!
Fun fact, I was blowing snow in the street...50 feet away my driveway...and a car went by... I had to rapidly shut off the blower, since I was throwing so much stones in the air! 🤦♂ So yeah..I kinda did!
Great work now you need to come to Ontario and build me one for my Kubota… what’s nexts a cab to keep you warm just putting a bug in your head. Removable would be cool
hi there well done , john
Great Work On Your Tractor Sir 👍🧐👌Keep Up Your OUTSTANDING sence of Humor Sir ( Shop Goof ) 🤣👍👍Cheers 🍻🍻
Hey thanks man!
A trick for future: Weld on the inside of the part of the bearing to shrink it. you wont need to cut it, because weld shrinks and diameter narrows and you will be able to push bearing out with no effort ;)
Very very nice 👍🏾
Thank you! Cheers!
weld inside the race of the bearing, it will shrink an pop out easier than cutting with a cut off wheel
God I was so worried about that spinning shaft. I can sleep easy now that you’ve put the sticker on it😎
Safety third! 😆
@@VinyB57 oh third. Errr yeah course. Bob rewrite the health and safety. It’s third not twelfth😳😎🤜
Tip to get an bearing race out , run a bead of weld round the inside the weld pulls the race smaller and it drops out
Thanks for the tip! I,ll try it next time...if I remembered it 😅
Not to shabby 👍
thanks! 👍
The music in the background at 14:07 will forever be the "Puddin's Fab Shop" music. lol
Oh, that 's a channel I didn't know about! BTW I always speed up this song...like it a lot! Thanks for the share of PFS channel
You got a sub @2:31 comment. 😂😂✅
( I have to start in march to make sure my house is ready for winter)
So cool front mount pto electric clutch. I’m doing the same on my Oliver 770. 👍
Thanks for the sub!
I have the exact same plan but I am going to use a hydraulic driven blower and a PTO hydraulic pump. I am in Ontario by the way and a first time viewer.
Great project man, let me know how it went...or if you want it, you could send me some pics at design57@outlook.com, I will post it to my community!
@@VinyB57 I need to build my workshop first.
Richtig Coole Arbeit mein Freund!💪👍
Du hast dir das Abonnieren verdient.
Weiter so Danke für deine Videos🤘
Schöne Grüße aus Österreich🍻
if you have a TIG welder and a broken baering. you can try to weld the inside of the outside bearing ring. then the bearing chrinks and you can remove without damaging the part. also i have some 6205 ready :D
Go frenchie, go!
😂 Sure will!
I think the next project should be a cab. lol
Oh...I tought about it.. 🙊 At least a roof
@@VinyB57 Do full cab, you won't regret.
I think every project needs at least one hockey sick.
hahaha...at least one!! 🤣👍
Yeah, you sure got ADHD and it just earned you another subscriber!
Keep on spitting out that content! 😄
BTW, by making the larger pulley that the backside of the V-belt rides on convex it will self center and stay on it without any guides.
However, with too much sideways force it will run of, so for the convex pulley surface to work the system needs to be pretty well built and in line 👍
@Mr.Engineer.
Keep on spitting out that content! 😄: SURE WILL!! 👌
Классный проект!!!
You know those guards are much easier to put on usually than to take off. However, I do usually remove part of the bell on the connection side because with 2 guards it is a bit cramped.
👍
This is definitely an awesome project and only drives home the fact that once my "shop-stead" build is completed that I absolutely MUST find a lathe and mill to play and learn on!!!!!!!!!!! "machining" with a drill press and/or grinder.. well.. is NOT machining!!!!! LOL
We all need a lathe and a mill....even if it's a small one...
I don't have a tractor, and it almost never snows where I live, but I watched the whole video(and part 1). Great work. When you finished it, I fully expected a cut to a 😔man sitting on his tractor in front of the shop, waiting for it to snow, lol.
That could have been a good ending...cause I m really waiting for more snow to come 😅
good content, but in the old days they would just twist the belt. you see that a lot on old farm equipment.
Although, one could also have fun with a planetary gear set there. 😁
Also, a good time to convert to hydro, although only beneficial if you have high snow.
If you destroy the bearing and only half of the bearing is left and you want to remove it i will give a tip. Welding. Welding cause shrinking and ring contraps and remove lightly. Simply just welding circle 3 strips on old bearing ring and thats it. No need to thank. Greetings
Were looking for this comment 😊😊
Yes thanks, I'll try it next time!
Yes we do this at work, warning everyone said welding hardened steel will make it shatter and send hot sharp shards all over the shop, but have welded race cones for years and never witnessed this.
"I don't have a sand blasting booth" lol this is where I get to brag about finding one on market place for $60 CAD last week :P
You might want to consider adding a chain from the loader support (front bumper) to the loader torque tube to limit upward travel of the loader while its connected. That way you dont over lift the loader, disconnecting the PTO shaft.
Guess I should have watched the last 30 seconds of video before commenting...
Yep! 😂
Nice 😀
What was your thinking of using a plastic pulley?
Wow, toujours super intéressants et impressionants tes projets! Très jaloux de ta shop!!! Est-ce que le ''auger'' ne devrait pas dépasser du caisson? Me semble que si tu t'approches trop pres les lames vont grignoter l'objet?
May I suggest that you grease the pto shaft well or it will be siezed when you come to use it next time.
I listened and I greased it! 👍
Love the ingenuity in your drive system! Just curious though why you didn't go for a hydraulic pump and motor... heck it would have solved your rotation issue and given you huge range of motion on the loader, *and* let you engage and disengage the blower, no? Would the power loss have been an issue?
Simply put....money! (also the pump needs to be on the PTO and mine stops with the clitch...so it wasn't an option...but mostly money!)
@@VinyB57 totally fair haha!
It's so much easier to throw rocks into neighbour's windows with that powerfull Massey than a lawn tractor.
Fun fact, I was blowing snow in the street...50 feet away my driveway...and a car went by... I had to rapidly shut off the blower, since I was throwing so much stones in the air! 🤦♂️
VinyB... Happy New Year! Really good job, missed you and your videos as usual!
I hope that company you working for, knows how good you are.... I said it before and doing what again, you are ONE OF THE ONES who should and could do something like this as a livelyhood...but then you might have to put out AT LEAST 2 videos per month.... happy times!
Good job again, happy new 2024, and you are maybe so you have to send some merch to Sweden... Just have to check the account - Im whent tru a working accident and now, have like a sick pension, dont know if you have something similar...but I have some money, but just a smaller size of my old paycheck coming in so, its tight some months... But I will buy some in a near future!👍👍👍👍👍👍😁🤔😉
Finally waiting more wasn’t an option
Хорошая работа👍
I'm going to suggest just going with roller chain And sprockets for more positive drive of the blower
nice job. i have a question, wouldn't a hydraulic pump be more use full?
I could get a PTO hydraulic pump ($$$) + and an hydraulic motor ($$$) with some controls and hoses ($)...I mean the belt was 30$ and the PTO shaft was free, thanks Vevor 😅 I mean K.I.S.S.
I could have really used that the other day. came like a meter of snow in 3 days here in southern norway and that is more than er are used to in such a short time, so i/my car was snowed in untill a big ass excevator came and cleared the road i'm on.
Beside the awesome engineering, I enjoy the funny bits 😂 18+… really? 🤣
Hello Viny! What was the material's name of first version of wearable pulley? looks like PA6.
HDPE...same stuff as you windshield washer jug. Not great...but that was I had on hand🤦♂️
2 pullies and a figure 8 belt
I though about it, but how to you get around the friction point in the middle of the figure 8, a friction plate.. not sure how long it could last...let me know what you had in mind!
@@VinyB57 large o ring as the belt.
Svp. Réinstalle le garde sur ton shaft de PTO. Coupe le 1" plus court ça va être plus facile a aligner.
Oui, mais non! 😅
7:29 on paper in right top corner, what is that sketch for? 😂😂
It's the 🍆 fairy at work!
It might not be just you with wanting to touch the dangerous spinning things
I know right!
8:00 i would just flip the blades
ahh rpm's
Not only that, a snowblower is not symitrical, so flipping the blades won t cut it and the auger is like a big screw, it cannot be reversed
I got more thx
you re welcome! 😅
What!? No stickers?
Where do you mean?
LOL, sorry in your Merch shop.@@VinyB57
Im glad you went with hockey sticks and not the drafted design at 7:30 🍆
😂😂.. ok to be honest, I was short in time, so I used an old footage (the calculator)...and completely forgot that the 🍆 fairy drafted a little something... thks for the reminder! 😅
je ne sais pas ou tu habites mais tu es chanceux d'avoir de la neige! ici, Rive sud MTL il ny a RIEN!
C est la neige qu on a eu debut décembre...apres, ca tout fondue...
@@VinyB57 haaa ceci explique cela!
Wish i was not so stupid.
Это просто окуенно!
👍🏻💪🏻
Thanks!;👍
It's funny you mention a bizarre desire to touch spinning objects. Every time I use my table saw I have some strange urge to touch the blade. I never would, but for some reason I just want to touch it....just a little.
Ok..I like touching spinny things...but never the blade!! 🤣 Be safe out there, ok!
J’aime regarder tes vidéo, tu n’as pas la prétention d’être parfait du premier coup, essaie erreur c’est comme ça qu’on avance, j’avais un chum ih lala aucune erreur possible, c’est lui même qui s’imposait cette pression, pas évident, ta sûrement remarqué que j’ai écris j’avais un ami.
HAHAHA....ouin... j'avais aussi un chum moi😉 Mais je fais exprès de montrer mes erreurs, pour divertir, informer et surtout encourager les gens qui regarde ce type de contenu, que c'est normal de faire des gaffes et de ce tromper. À mon travail, je concois des machines robotisées depuis 18 ans et j'ai jamais fait ou vu un projet sans problèmes!