Today I got my first board in like 12 years because watching you guys made me want to try skating again. I didn't really do trickskating back then, I was just riding my board around my neighbourhood. Maybe you'll get a comment below one of your videos soon how your first volume of tutorial videos either got me to landing my first ollie or how I broke my first bone skateboarding. Thankfully having the shop apply the griptape before shipping was an option so it will be a while before I have to either get it off or apply new griptape but I'll remember this when the time comes ^^
Jon Gutierrez actually a poseur ( yes it's spelled like that doesn't matter ) is a person who acts like they skate or who actually skates but acts like he's much better then he actually is. This guy just goes "I can't even stand on a skateboard." - how does that fit into the definition of "poseur" ?
When youre pulling the grip tape off dont pull it up at a sharp angle, keep it close to the board like its folding in half. Anything like tape, stickers, grip tape, etc., pulls off better that way. And heat definitely helps loosen up the glue.
“Roll it off like a chef” that’s a great idea actually. And I would recommend their video called “How to do a Ollie tutorial” and yesterday I literally did it. That video worked like a charm. (And btw it said how to do it in a day. You can find it in their description.)
OFcourse, I can't thank Aaron and other braille guys enough cause they have entertained me so much back in the days! :) And I am glad that they are still making videos, not as good as they used to be but still :)
most glues are making physical bonds with the surfaces. glue is essentially a very low viscosity fluid. by heating it up, you are increasing the viscosity (making it thinner). so heating it up and then pulling is the way to go! thanks Lance for helping these guys out!
I need help with my late tre quad backside flip 1260 body varial late laser to dark slide to feather flip switch 360 front shove out, i just can't seem to land bolts!
So I ordered a board and it came with grip applied on it, but it had air bubbles and stuff, but the worst part was that there was a graphic that covered the top too and I wanted clear grip tape so I could see it. If I peel off the grip tape would it peel off part of the graphic too????
I just want to say, I don't use notifications at all, and I only check this channel every few days. Yet, I have watched, and will watch, every single video this channel puts out.
For a number of years I worked at a professional sign shop and I had to remove vinyl often. I believe the easiest way is after you have the start you roll it over a dowel or something, once it's made one wrap around it will stick to itself and you can use a blow dryer or heat gun to help it along as you just keep rolling the dowel.
Been watching a lot of your video. Appreciate you guys keeping it “clean” for family time. My 8 year old loves watching the videos and keeps asking me if we can go and see you guys. We live in North Bay.
Because you could have stept in mud and stept on your board afterwarts and your griptape is all dirty but your bord is brand new so you just replace the old grip with a new grip so you can skate your brand new skateboard with good grip
I've been having a serious problem with my kickflips and I've watched every single video you have but it doesn't seem to work and I think t has something to do with muscle memory but if you wouldn't mind doing a kickflip tutorial 3.0 it would really mean a lot!!
i've used a heat gun to great results. more heat and quicker than a hair dryer. I had to remove grip tape from five boards for a project and it peeled off super easy.
You guys inspired me to skate the only tricks I can do is a Ollie and shuvit I watch you guys everyday it’s a habbit for me. You guys just made me skate
If I have the wheels on and still remove the grip tape can I put the new one on already or do I have to remove the wheels before I put the new grip tape on.
It‘s better, when you first cut with the razor around the board, and than you can pull it off! When you remove 1/3 from the board, you can put it on the ground and put a foot on the board to remove the rest of the griptape!
Yeah, when I removed grip tape for the first time, I learned heating it up with the hair dryer over top was the easiest :D. Also I've been notified of your guy's uploads, hah! :P
I have never liked skateboarding and never owned a skateboard but your channel is inspiring me and I might get a skateboard. Although I'm more of a DIY person so I might just make custom skateboards
So what would you recommend i do if i have that spray on grip tape? its very worn down, do you think it would even affect the new sheet in any way? should i just lay it over? i have been thinking about this for months now and would like any advice. Thank you.
Hello Braille so I told my friend about this method long ago but he told me that doing that also warms up the glue between each piece of wood damaging it little by little can you reject/confirm this? Ty :-)
please do a fs 180 skate support. i never really tried to learn them till i saw skateboarding made simple. for some reason i cant keep center over the board during the turn.
i think this video should be renamed to aaron kyro sponsored professional skateboarder from the san francisco bay area attempts to remove grip tape from a skateboard
Once you have it halfway, flip it around and start the other side, so you can have the same leverage when pulling. Like when you were sitting on it. Then once you get so far, you can just grab both ends and pull together.
okay I have questions now I skate reds bearings. when I'm riding on the road which is rather rough. am I not coasting far because of the texture of the road? also I'm a big guy not like gabe big but more like a Volkswagen on a skateboard I'm 350lb. basically I'm asking if it's the road, my bearings, or my fluffy? do I just need better bearings to accommodate for my size? or maybe a better terrain?
Hi I'm mahan and I just bought a skateboard. I watch your videos and I have been practising all day to learn an ollie. Can you help me fix my mistakes because I think my ollie is a bit bad.
What if my griptape is completely fine but i just want to put a cool graphic on to, will this still work? Or is it specifically if your griptape is not reparable?
Glad I watched this video. I just so happen to have a heat gun like what you might use to heat and peel flooring tiles from an institutional lunchroom. My Braille blank board grip tape is still relatively new but when the time grows nigh I'll be all set thanks to this vid.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
half the head on my hair..
SmokewadeLOLOLOLOLOL
Smokewade I was just going to comment that😂
haha I noticed that one too
wow scrolled over this the moment he said that
hahaha same :D
Today I got my first board in like 12 years because watching you guys made me want to try skating again. I didn't really do trickskating back then, I was just riding my board around my neighbourhood. Maybe you'll get a comment below one of your videos soon how your first volume of tutorial videos either got me to landing my first ollie or how I broke my first bone skateboarding.
Thankfully having the shop apply the griptape before shipping was an option so it will be a while before I have to either get it off or apply new griptape but I'll remember this when the time comes ^^
I'm triggered. Who do I get to use the razor if I don't have a dad?
David Eisenstein Your dog
Yo mama.
David Eisenstein yourself?
David Eisenstein your parole officer
your gym teacher
Mom: WHAT YOU DOI'N
Me: Watching someone remove grip tape for 10 mins
I hate it when I lose half the head on my hair too.
5:08 "holes make it real hard" -Aaron Kyro
Hoesay Deep Sea Dive Waldo hahahahahaha
Thanks Towelie
That is actually what he said 🤓
They make me hard too.
Followed by "Let's get this off here."
I’ll ask my dad when he comes home with the milk😁
18* years later
@@ksksjdhd3526 87789 years lateh
9999999999999999999999999 years later
@@Ok-xi5xe unli-mited y-ears lat- *heart beat stops*
Not funny man
Why am I watching this, I can't even stand on a skateboard
MrSnowrocks nobody cares if u skate or not
Jon Gutierrez actually a poseur ( yes it's spelled like that doesn't matter ) is a person who acts like they skate or who actually skates but acts like he's much better then he actually is. This guy just goes "I can't even stand on a skateboard." - how does that fit into the definition of "poseur" ?
get one dude. It's fun.
Definitely check out skateboarding made simple...
Gay gay stop bruh just leave
3:45. did Aaron just say : there goes half the head of my hair
Emil Samuel i heard that too
Yes, he did #DyslexicProblems
yep
"holes make it real hard"
Emil Samuel yeah he did
When youre pulling the grip tape off dont pull it up at a sharp angle, keep it close to the board like its folding in half. Anything like tape, stickers, grip tape, etc., pulls off better that way. And heat definitely helps loosen up the glue.
“ I lost half the head on my hair”
Aron Kyro
Your pfp fits perfectly with it lmao
@@PixieMinie 😂😂😂
Next time try using a rolling pin. Peel off part of the grip, wrap it around the rolling pin and then roll it off like a chef.
👍 I will try that.
"Like a doctor!" 'Joey Coco Diaz'
@@TheMhankel you fucking momo
@@javierbautista9385 a momo maybe, but are your jeans high and tight?
“Roll it off like a chef” that’s a great idea actually. And I would recommend their video called “How to do a Ollie tutorial” and yesterday I literally did it. That video worked like a charm. (And btw it said how to do it in a day. You can find it in their description.)
OLD BRAILLE IS BACK
Kyle Richardson don't expect it to stay
Yea, cause Lance wasn't shouting his stupid comments through the whole video.
Don't be so pessimistic. Be happy they're making the types of videos you enjoy :).
Kyle Richardson old Braille wasn't even that good it was just how to videos like every other skate channel
OFcourse, I can't thank Aaron and other braille guys enough cause they have entertained me so much back in the days! :) And I am glad that they are still making videos, not as good as they used to be but still :)
How to remove grip tape: Step One, don't be Aaron Kyro.
G Thomas you are mean
@@deathbombbra9413 he's joking
Done! What's step 2?
Just pop that bad boy in the oven and heat it up to 350 and pull the tape off in a matter of seconds
Behind The Meme seriously?
Wait what
Whait you skate
Then at the end, you cute your arm off
You ruin memes for all of us
most glues are making physical bonds with the surfaces. glue is essentially a very low viscosity fluid. by heating it up, you are increasing the viscosity (making it thinner). so heating it up and then pulling is the way to go! thanks Lance for helping these guys out!
If you're reading this, have a Great day! 😄😄😄
CyanGaming | ᴹᶦᶰᵉᶜʳᵃᶠᵗ ⁻ ᴳᵃᵐᵉᴾᶫᵃʸ I was reading this and dropped my phone🙁
CyanGaming | ᴹᶦᶰᵉᶜʳᵃᶠᵗ ⁻ ᴳᵃᵐᵉᴾᶫᵃʸ don't tell me what to do.
Fuck u.
you too man
can i get a sub. im tryin to get 20 before my b day. if not then have a great day anyway
I've never skated a day in my life and I still watch all their videos... great content
I need help with my late tre quad backside flip 1260 body varial late laser to dark slide to feather flip switch 360 front shove out, i just can't seem to land bolts!
To coffin?
Put ur feet in rice
Over night
So I ordered a board and it came with grip applied on it, but it had air bubbles and stuff, but the worst part was that there was a graphic that covered the top too and I wanted clear grip tape so I could see it. If I peel off the grip tape would it peel off part of the graphic too????
3:44 There goes half the head of my hair
Lmao
🤐
I just want to say, I don't use notifications at all, and I only check this channel every few days. Yet, I have watched, and will watch, every single video this channel puts out.
Still watching
“There goes half of the head on my hair”
- Aaron Kyro: professional skateboarder from the San Francisco Bay Area, 2017
For a number of years I worked at a professional sign shop and I had to remove vinyl often. I believe the easiest way is after you have the start you roll it over a dowel or something, once it's made one wrap around it will stick to itself and you can use a blow dryer or heat gun to help it along as you just keep rolling the dowel.
6:26 he didn't say "first try"
I'm so sad
Massahiro Oura miss the first try n' chicken teriyakeeeey shouts :(
G-sus Ramos …it is a hard rhino!
Massahiro Oura me to
Teryjaki is best gt youtuber
*_FUHST TROiiiiiiIIIIIIIIIIIIIYYYYYYYYYYYYYYYYYYY!!!_*
Been watching a lot of your video. Appreciate you guys keeping it “clean” for family time. My 8 year old loves watching the videos and keeps asking me if we can go and see you guys. We live in North Bay.
"Holes make it real hard" - Aaron Kyro 2017
Dreamsage didn't Kelly say that?
Aaron: "Replace the griptape? Why wouldn't I just buy a new board?"
Francis Sims poor
Because you could have stept in mud and stept on your board afterwarts and your griptape is all dirty but your bord is brand new so you just replace the old grip with a new grip so you can skate your brand new skateboard with good grip
Watch this video reduces sale revenue of Revive skateboards by 50% and doubles the sale of AM grip tape.
Because if it is a good board sometimes you can left the grip out of grip before destroying the deck and need to replace it.
Francis Sims save money
"Mom i need your hair dryer"
Mom:"What why?"
"...dont worry about it mom"
Was going to do this today and glad to see it works.
Hate doing something only to find out there's an easier way.
I've been having a serious problem with my kickflips and I've watched every single video you have but it doesn't seem to work and I think t has something to do with muscle memory but if you wouldn't mind doing a kickflip tutorial 3.0 it would really mean a lot!!
Emilio Marticorena try putting equal amounts of pressure on both feet if that helps
glad to see you stick w tips too! stupid skates are great but we also love tips on how to do things better!! lOVE the channel! u guys are dope!!!
i've used a heat gun to great results. more heat and quicker than a hair dryer. I had to remove grip tape from five boards for a project and it peeled off super easy.
did you just call it a heat gun😭😭
@@chiefkeef6405 its what it's called in South Africa
You guys inspired me to skate the only tricks I can do is a Ollie and shuvit I watch you guys everyday it’s a habbit for me. You guys just made me skate
Have you guys gotten the Toilet Paper skateboard from Press channel??
Crusader Nomad Ikr! i seen the video a few days ago of them making it. I hope they get it and Unbox it soon
If I have the wheels on and still remove the grip tape can I put the new one on already or do I have to remove the wheels before I put the new grip tape on.
If you have stumbled upon this video, you've just made first checkpoint in your skateboarding adventure.
I found it worked best when I left my board in the sun for about 15 minutes and it was super easy to pull and and all in one.👍🏾👍🏾
Should use the Chinese flashlight to heat it up
Lance is the genius of the group!!
"If you are a younger kid get your dad to help" haha Aaron my dad went to the store 10 years ago looking for the best milk for me >:D
Edit:Milk
same! 🤠
Thanks guys! It came off super easy *FIRST TRY*
make a how fast can you remove the griptape against someone else
George Watson ooh yeah like a race good idea lol
hey Aaron please can you make a tutorial on how to ollie into mannual like up a curb or on a manual pad, thanks
It‘s better, when you first cut with the razor around the board, and than you can pull it off!
When you remove 1/3 from the board, you can put it on the ground and put a foot on the board to remove the rest of the griptape!
Yeah, when I removed grip tape for the first time, I learned heating it up with the hair dryer over top was the easiest :D. Also I've been notified of your guy's uploads, hah! :P
I used to just heat up all the grip tape and then pull it, that's the easiest way
Yup...or lay some parchment paper on the grip tape and make a couple passes with an iron.
I have never liked skateboarding and never owned a skateboard but your channel is inspiring me and I might get a skateboard. Although I'm more of a DIY person so I might just make custom skateboards
Could leave the board in sunlight for the heat ☀️
Mulletovich - definitely not hot enough it needs to be extremely hot to melt the glue
So what would you recommend i do if i have that spray on grip tape? its very worn down, do you think it would even affect the new sheet in any way? should i just lay it over? i have been thinking about this for months now and would like any advice. Thank you.
Lol you did it the long way! If you heat up the WHOLE board at once for 5 mins, it comes off in one quick rip
can i use the top of the oven as a substitute for a hairdryer?
i dont have long hair so i dont own a hairdryer
3:44 " there goes half the head on my hair"
Quick question? Why the extra holes?
when you have 2.5 million subs but your thumbnail is just a screenshot
Do we need to remove the wheels and the thing that holds the wheels?
3:45 there goes half od the head of my hair
Hello Braille so I told my friend about this method long ago but he told me that doing that also warms up the glue between each piece of wood damaging it little by little can you reject/confirm this? Ty :-)
Still waiting on that halfpipe.. 😬
Could you guys please make a video on teaching a bunch of quarter pipe tricks. Thanks
You guys really needed to make a video to figure out that heat makes glue easier to remove?
it softens the epoxy if done right
same question. I thought it was common knowledge.
Braille I love how u make a video everyday if you keep going you could be the most famous u tuber
5:08 that's what she said.
please do a fs 180 skate support. i never really tried to learn them till i saw skateboarding made simple. for some reason i cant keep center over the board during the turn.
i think this video should be renamed to aaron kyro sponsored professional skateboarder from the san francisco bay area attempts to remove grip tape from a skateboard
wouldnt the blow dryer damage the board? and can i use a kitchen knife because i have no razor blade
"Leave us in the comment" -Aaron Kyro
I don't even skateboard but I love this channel.
Once you have it halfway, flip it around and start the other side, so you can have the same leverage when pulling. Like when you were sitting on it. Then once you get so far, you can just grab both ends and pull together.
okay I have questions now I skate reds bearings. when I'm riding on the road which is rather rough. am I not coasting far because of the texture of the road? also I'm a big guy not like gabe big but more like a Volkswagen on a skateboard I'm 350lb. basically I'm asking if it's the road, my bearings, or my fluffy? do I just need better bearings to accommodate for my size? or maybe a better terrain?
I’ll get my dad when he sneaks back in the country
Are there any good ways of fixing razor tail? I always seem to end up with razor tail after a while.
This technique works with women too.
+Jocelyn Edwards lol, looks like my technique worked on this bot
+Ok]: Skate nothankskiddo
Jae Watkins your women have griptape?
Munch Biscuit how else do you do a sick kickflip off a woman?
its way easier
Hi I'm mahan and I just bought a skateboard. I watch your videos and I have been practising all day to learn an ollie. Can you help me fix my mistakes because I think my ollie is a bit bad.
I used to take grip from old boards and put it on spares when I couldn't afford new grip lol
I think you're better off getting 5 dollar griptape from the online store called TGM skateboard, they got decent quality grip,for great prices
@@apgbgb1651 yeah but you have to understand sometimes transportation can be an issue
thank you bro im a new in skateboarding and im watching how to ollie video help me alot and super close from doing ollie thank you thank you..
A heat gun would work 10x better. Heating the glue will soften it so that the tape is easier to pull off.
Yo Braille I have had a hard time doing kickflip underflips do you have any tips
Stupid Skate: Skating in Crocs
How do you designs for skateboards customize skateboard on a customer support
"There goes half the head on my hair" -Arron Kyro 2017
Do you have a video on hardware you need to buy when you're just starting out?
How to remove a griptape
There it get done for like 6:10
me : 1 hour
my technique
I do t even want to question it
Does it have to be a Revlon hairdryer or would other brands work?
"Half the head on my hair"
-Aaron Kyro 2017
just wondering, is it alright to layer grip tape ontop of the beaten one?
Bring back Justin Soria 2017!! Doods missing out
Is it possible to put new grip on of the board already has trucks on it? Or do I need to take it off just to put new grip on?
LiamPlqys and have griptape on top of your hardware?
Sweating Dynasty just buy new hardware its literally $2
1:57 (Quality content)
Thanks Braille for helping it did well and now i have a brand new grip tape on
Thank God Lance did not appear
Mllr hr why
What if my griptape is completely fine but i just want to put a cool graphic on to, will this still work? Or is it specifically if your griptape is not reparable?
pin me.....................jk i dont care
need help finding a skate park near me in Virgina they are no where and the terrain is no good to learn how to skate
hey braille did you already did a lateflip video? im really interested in that trick
Fipsynator yes he did garrett ginner teached him.......and shortly after that he learned nollie late flips by himself
what camera does lance use to record all these videos?
I need help with what's the cheapest skateboard bearing in the best
Does anybody know if I could put grip on a board after I spray paint the deck itself or will the board not stick to the paint I applied
Thanks man this really helped
Glad I watched this video. I just so happen to have a heat gun like what you might use to heat and peel flooring tiles from an institutional lunchroom. My Braille blank board grip tape is still relatively new but when the time grows nigh I'll be all set thanks to this vid.