Single Cab S10 Subwoofer Box
HTML-код
- Опубликовано: 22 авг 2024
- Have no room for a subs in an S10 Single Cab? I feel ya! However, I'm not going to let tight quarters keep me from hearing some hump in the trunk!
This is how I built a box to fit a 10" JL Audio 10W3 D-4, behind the driver’s seat.
I bought this speaker used from Facebook Marketplace for $200. Not a bad deal! They are $330 new on Amazon. Great speaker!
I just talked to my stepdad about doing this with two 12s 😂 I don’t need my seat all the way back but a click or two up is enough room for me. I can’t wait to get it set up and finished.
The slim D-4s are the jam... only 3.25” inches needed behind the speaker for clearance.
The one 10 is decent, but two 12s will hit hard as hell!
I’m going to build mine now I was going to have it made but you inspired me to make my own thanks🤟🏽 I got a 09 single cab Colorado that I want subs in I’m probably going to put 2 on each side if not just one would probably be enough in that small single cab
It still runs don't it screw what people think
Thanks for sharing this I've been trying to figure out how to about adding subs
I've seen guys move the jack box so they can put the box behind the passenger seat, would love to have that box you made for your truck.
i did that in mine
Looks good I wanna make a custom box on the passenger side of the 2001 s10 but i push the front seat forward enough space for 1 15” inch kicker i wonder if that is possible
Of it’s a regular cab, probably not. Extended cab, you can probably get it.
Nice, can you post a video when it's all connected... like to know how it sounds.
Sure
Still waiting
@@CliffsHowTo s
@@1jdm408 I have two of these in a 06 crewcab behind the rear seat. They sound alright nothing too loud I would run another two 4 in total to even out the bass.
Great video do you sell these enclosures too?
I do not.
Nice
In static there is clearance, but how about full excursion? based purely on what I saw from the video for clearance and the mechanical capability of that driver, it seems it will be slapping the back of the seat.
One-Way Linear Excursion (Xmax): 0.6 in/15.2 mm on that speaker. we don't calculate full excursion because that movement would include travel back into the enclosure.
Just need verification that it does not slap the seat, as I am currently investigating options for a 99 dime right now.
You are correct. If i really eat the speaker hump, it will hit the seat. The way I usually listen to it though, it’s not a problem.
@@CliffsHowTo So in theory you could make roughly 4 to 8 blocks 3/4 inch thick and about two inches long or longer (depending on number of blocks used) and install those around the speaker to keep the seat off the speaker and be able to slam it no problems.
Cool stuff, appreciate the response, looks like I will be building myself a box for two JL shallow mounts.
cannot tell you how much I appreciate you doing my homework for me ;)
And I thought my 87 k10 was cramped behind the seat lol
do you got a box i’m looking for a box for my 87 too
Love it. Nice job 👌
IS there a follow up video with the amp install and final sound? I need to do this on my 88 s10
Not yet, still on my list! One of these days!
I love those tw3s but damn they're expensive
Yeah, I kept an eye out on Facebook marketplace. I got lucky and got them used, in new condition, in the original sales boxes, for $200 each!
I got one for the S10, one for the corvette!
i want a custom box for my s10 but i have the extended cab
A 2 channel 500 watts max would run that I believe
I got a single 1000 that outputs 500 rms. Powers it pretty good!
Great video! Got a ‘92 s10 2wd standard cab long bed and there is no freakin room behind the bench seat with jack box back there also! Just want better sound than stock setup still in it. Was looking at the Rockville RW10CA 800w powered sub box for $129, any suggestions? I know this box isn’t going to sound anything like yours but thought for a cheap, quick solution it might be ok, will be replacing the dash 4x6’s and 4x10’s in the side pillars and head unit as well with less expensive but better than stock stuff. Any ideas are definitely appreciated brother! 👍🏻
I’m not familiar with that brand/setup, so I can’t really speak to that. At 800 watts though, that’s more than what I’ve got in my setup. Mines at 500, and hits pretty good.
@@CliffsHowTo I am alittle skeptical at $129 tho, have a feeling it’s going to sound like the sub boxes we sell at Autozone. Over 1/4 the way up on volume and it’ll sound like a paper shredder on steroids! Hahahaha thanx for the response bud 👍
Should these boxes be ported or sealed when using shallow woofers?
Can be ported or not. JL website has specs for both.
What's the outside dimensions I have a truck box that I'm going to modify
I think I state the dimensions in the video.
Need someone to build me one
Would you consider building one of these boxes and selling them?
Not really. I have too many projects going on already!
Thanks for the offer though!
My brother. I have a s10. I love the box you made. You want to sell me one the same size. I m PayPal ready.
No thank you sir.
What size sub
JL Audio 10TW3
Does it have bass.alot of those are crap.
It hits for sure! A lot of what’s are crap? The speaker or amp? I’ve had many JLs, and they’ve all been pretty good!
Would this work with the bench seat?
Not sure. I don’t know much about how those are set up.
Would you accept a commission for this? Lol I would totally buy
No thank you
Would you build another identical and ship to me?
I appreciate the offer, but I’ve had an amp and speaker for my corvette sitting in my office for over a year now! I need to build a box for that!
I will
I need those dimensions
I spell it out in the video.
Could you please post the dimensions of the box?
I tell you the inside dimensions at 2:10. About 21-22” wide also.
Cliff's How To Channel Awesome thank you 🙏🏽🙏🏽🙏🏽