That's a very neat and precise build, that jig for your dremel looks very useful. I've actually ordered a table saw, looking forward to start using it, no more crooked imprecise cuts with a regular circular saw.
Beautiful and net Job. Some people don’t understand this a very basic but proper way to build a nice bass box which will give you nice results if you need something to save space and have an extra kick for your stereo system. Of course if you need something fancier and more powerful there are more complicated and different ways to do it and of course more expensive.👍
Great job, very nice look and you build it in right way (I have look a lots videos) and most important - great sound ! Congrats ! I vatched few min's before some guy called him self a PRO, he made nice looking box but it sounds like I will never post that video if I was in his place LOL :) You got this 100% ;) Thanks for sharing !
Boa tarde. Excelente trabalho parabéns. Tenho um subwoofer slim cadence 12" quero fazer uma caixa que não ocupe muito espaço no meu carro. Meu carro é um fox. Quero também colocar um falante pra voz. O que me sugere?
try to put acoustic wool on sides and back. many times will help to get lower Hz and it can add some dB. and also wrap cable in some soft of foam to prevend cable rattle against box. longer port might lower Hz even more. i dont know if that woofer has removable plastic magnet cover. if yes remove it. many times cousing rattle.
the use of acoustic wool is only in case of small enclosures in tight spaces to "virtually" enlarge and reach the desire volume, if your volume is correct no wool is needed, but if its is correct an you add acoustic wool, the sub only will over damp (move in excess) because it sees a "larger" enclosure, causing the coil to travel more than its regular stroke design and probably short and fail due to coil friction in the higher/lower parts of the magnet channel, that's how i blow a couple of subs in the past, remember to reduce 5-10% the box size and you probably have a clean, quiet an loud sub....like this one in the video
"many times will help to get lower Hz and it can add some dB" Depends on the enclosure, and project goals. The other issue is the type of damping makes a huge difference! It can either kill a drivers performance or enhance it. When you add damping, you're opening a can of worms!
Screws or nails are only used to hold it together till the glue dries, the glue is what keeps it together. I see you tinned the speaker wires, then attached the banana plugs, then stuck them under the speaker wire lugs... you didn't need the banana plugs, was a waste of money in that situation. I would have mounted the speaker offset to the side and mounted the amp on top next to it. The only other thing I'd have done is add some bracing, and make sure there were no air leaks.
Makes it more professional looking indeed, but I would only do that if I had free solder and banana plugs for life. Other than that, bare wire is fine. Yeah the amp on the box would be a great idea with standoffs too.
If the box is stiff enough, vibration will never be a problem, and it's vibration that can cause components to fail prematurely, a stiff box is required for maximum efficiency anyways, so adding a second layer of MDF in which to mount the amp to would further reduce vibration, internal bracing will also help, soft rubber between the amp and box is yet another thing that can reduce vibration transfer to the amp.
Magnífico trabajo compañero....una duda....¿no hay que poner material absorbente de relleno en el interior del cajón?...¿las medidas de su proyecto, serían compatibles con un altavoz de diez pulgadas?....muchas gracias por su aportación amigo....un abrazo....
Good morning, my friend, I want to make a box like this for a 12 "250w rms subwoofer which would be the measurements in centimeters of each 15mm mdf piece.
Did you use the actual specs for the speaker? And what about sealing the joints with caulking? I built my own with my uncle and didnt use any caulking or the right specs. When we finally did use the specific dimensions set by the manufacture, the results were amazing. I had 2 ten inch sony explodes, then went onto one 15 inch clarion. The two tens pumped way better. Running on a 240 watt kikr amp. Bridged. Oh i miss the bump, but im not a kid anymore. Need that room for more practical stuff.
"but then you lay it on its back and make half the boot unusable?" If you don't like that, you won;t like this - www.google.com/search?client=firefox-b-d&q=friv
hey bud, nice and clean job man. so, you used MDF wood, correct? I need to the exact thing for my sierra. can i get the measurements please? thanks bud
Bom diaaa, kara ficou tooppp, tenho uma ranger 2010 /2011 E quero colocar uma caixa de grave dessa atrás do banco , por quanto vc faz uma completa tipo essa aí ?? , qual telefo e pra contato ?
1.Always use screws on your boxes. Glue alone shreds from vibration. 2.This box is very small for band pass. Should be a sealed unit as long as you have enough power to drive it. And 3. Should be facing backwards not upwards (better performance and protection of the speaker). But i'm liking and subscribing because i love your videos.
I was going to ask if that port hole is sufficent... I've seen other box builds on YT where the box port was very long!! One was a down firing JL 10TW3-D4
today i learned what that metal piece that came with the Dremel is used for ive been trying to figure out how to do this forever n never thought just look on youtube now i can finnally redo all my crap boxes i have now thonk you
I love watching peoples videos that take pride in their work! Well done sir!
Exactly the same in my car..even a speaker . .
Thanks for uploading ...this vedio
Que serviço mega maravilhoso, vc está de parabéns!!!👏😎
Um brasileiro 👊
That's a very neat and precise build, that jig for your dremel looks very useful. I've actually ordered a table saw, looking forward to start using it, no more crooked imprecise cuts with a regular circular saw.
I just don't understand why people cut with a circular saw, freehand, and expect perfect results.
Beautiful and net Job. Some people don’t understand this a very basic but proper way to build a nice bass box which will give you nice results if you need something to save space and have an extra kick for your stereo system. Of course if you need something fancier and more powerful there are more complicated and different ways to do it and of course more expensive.👍
more complicated and different ways to do it and of course more expensive
Do you mean like this? - ruclips.net/video/vKm3g0d9foQ/видео.html
Very good job ! Nice ! I have exactly do the same ! Perfect result ! ( with kenwood WPF good but kicker solobaric, more effect ! )
Great job, very nice look and you build it in right way (I have look a lots videos) and most important - great sound ! Congrats ! I vatched few min's before some guy called him self a PRO, he made nice looking box but it sounds like I will never post that video if I was in his place LOL :) You got this 100% ;) Thanks for sharing !
He made that look super easy. Awesome vid.👍👍
Yes man u r the best one.. You tell each and every thing no matters is easy or hard but u tell every thing hats off u
Really well done! Should sound amazingly!
really good finishing i wish could make one for my car rest i can do but dont have few machines to cut the wood
well made sir well made :) like your way of putting on carpet that was way different then i was taught :)
it sound awesome man great job i wanna do that Lit bass sounds !
Very clean build . What type carpet did you use ? Looks thicker that the cheap carpet you see on other boxes .
Looks great in the trunk. Fits nicely.
Nice work!! That's a very slim box
Oh boy! What a clean build.
i like this beat dude and Abou the box,too cool! congratu... ;)
Clean and professional. Nice work! 🧰
Boa tarde. Excelente trabalho parabéns. Tenho um subwoofer slim cadence 12" quero fazer uma caixa que não ocupe muito espaço no meu carro. Meu carro é um fox. Quero também colocar um falante pra voz. O que me sugere?
Amazing how a good quality video can educate you :)
First sub box vid I watched when I was 13,17 and still loving my hobby😁
beautiful work perfect sound
Emthesage EMM loki
Agreed!
The video and box construction are first rate. Nicely done, and thanks for this!
try to put acoustic wool on sides and back. many times will help to get lower Hz and it can add some dB. and also wrap cable in some soft of foam to prevend cable rattle against box. longer port might lower Hz even more. i dont know if that woofer has removable plastic magnet cover. if yes remove it. many times cousing rattle.
unless
it's all tight and glued up. no magnets.
the use of acoustic wool is only in case of small enclosures in tight spaces to "virtually" enlarge and reach the desire volume, if your volume is correct no wool is needed, but if its is correct an you add acoustic wool, the sub only will over damp (move in excess) because it sees a "larger" enclosure, causing the coil to travel more than its regular stroke design and probably short and fail due to coil friction in the higher/lower parts of the magnet channel, that's how i blow a couple of subs in the past, remember to reduce 5-10% the box size and you probably have a clean, quiet an loud sub....like this one in the video
Idiot... ITS PORTED it doesnt need that gay ass wool. If you arent an idiot, and build a box the correct size, you wont need that dumb shit.
"many times will help to get lower Hz and it can add some dB"
Depends on the enclosure, and project goals. The other issue is the type of damping makes a huge difference! It can either kill a drivers performance or enhance it. When you add damping, you're opening a can of worms!
What are the measurements for this box ?
Its so satisfying to watch your videos :D
Muito bem feito Parabéns.
it matches the trunk of your car really well!!
Nice one! It gave me some thoughts how to put on fabric on my box.
Wow!!! Great quality of craftsmanship! Definitely would get a box made by you! 👍🏼
Nice Job!
Congratulations for you from Hungary!
Looks like a great enclosure...did you figure out the tuning of the port..
by the length and size of the port and size of box id say its tuned pretty high....
AXWAMMMM talente
axwammm work 😂😂😂😂🤣😋😍😍😍
This is best box making video
Well, can I show you mine?
ruclips.net/video/y6_GbYeeFwE/видео.html
Screws or nails are only used to hold it together till the glue dries, the glue is what keeps it together.
I see you tinned the speaker wires, then attached the banana plugs, then stuck them under the speaker wire lugs... you didn't need the banana plugs, was a waste of money in that situation.
I would have mounted the speaker offset to the side and mounted the amp on top next to it.
The only other thing I'd have done is add some bracing, and make sure there were no air leaks.
Makes it more professional looking indeed, but I would only do that if I had free solder and banana plugs for life. Other than that, bare wire is fine. Yeah the amp on the box would be a great idea with standoffs too.
If the box is stiff enough, vibration will never be a problem, and it's vibration that can cause components to fail prematurely, a stiff box is required for maximum efficiency anyways, so adding a second layer of MDF in which to mount the amp to would further reduce vibration, internal bracing will also help, soft rubber between the amp and box is yet another thing that can reduce vibration transfer to the amp.
Either way standoffs are a good idea.
Thanks for the video, Let me know materials which you using to finish (Black mat and Spray)? thank you!!!
MDF
This is a super clean build
Lo mejor de este vídeo son las herramienta de trabajo que utiliza tienes de todo
Magnífico trabajo compañero....una duda....¿no hay que poner material absorbente de relleno en el interior del cajón?...¿las medidas de su proyecto, serían compatibles con un altavoz de diez pulgadas?....muchas gracias por su aportación amigo....un abrazo....
A real pro.
I enjoyed watching your video
Great job and nicely built. Sounds awesome
and also can u please share the dimensions....
Can I know all detail of it?
I want to have one for behind my car seat.
Thank You.
Kenwood KFC-WPS1200F
ruclips.net/video/5VcrhrKv08I/видео.html
Plz send me ful box & subwoofers RMS details
Love ur work pal... Would u mind telling me length nd width of ur box?
Muy pulido para trabajar gracias por tu video muy instructivo
Классный коробки! 👍👍👍
What is the port tuning on that box?
the work is very simple and very good!
the carpeting part was soo smooth wow
Muy bien trabajo, Disculpa a que ángulo hacer tus cortes
Good morning, my friend, I want to make a box like this for a 12 "250w rms subwoofer which would be the measurements in centimeters of each 15mm mdf piece.
Nice work, and perfect sound
At first I thought: "damn that's some ugly carpet" but then I saw how well it fits with the car. Great job man, keep it up.
Did you use the actual specs for the speaker? And what about sealing the joints with caulking? I built my own with my uncle and didnt use any caulking or the right specs. When we finally did use the specific dimensions set by the manufacture, the results were amazing. I had 2 ten inch sony explodes, then went onto one 15 inch clarion. The two tens pumped way better. Running on a 240 watt kikr amp. Bridged. Oh i miss the bump, but im not a kid anymore. Need that room for more practical stuff.
wow, super clean job… love it…
Beautiful work man
I want one...lol that is awesome!
Do you know Thiele/Small parameters?
_ S3vv3n_ lol
good job bro!
Por favor qual a medida dessa caixa?👏👏👏🇧🇷👍da pra usar sub de 12 polegadas?
Super robota, jak się sprawuje ten subwoofer ? Ile ma RMS, a ile dostaje ?
Muchas gracias por tu video, es necesario hacer agujeros para la salida del aire? Gracias de nuevo
this is the first time i see building speaker box without using wood screws.👍
What do you need screws for? I've always used clamps. Much cleaner!
I like the nice thin box, good use of a shallow mount sub - but then you lay it on its back and make half the boot unusable?
"but then you lay it on its back and make half the boot unusable?"
If you don't like that, you won;t like this - www.google.com/search?client=firefox-b-d&q=friv
Your videos are always entertaning ❤
parabens pelo belo trabalho!!!!!!!
hey bud, nice and clean job man. so, you used MDF wood, correct? I need to the exact thing for my sierra. can i get the measurements please? thanks bud
link for the adapter u use to make the circles??
Inspirational video . Thank You 🙏💯 I shall post my work Also.
Bom diaaa, kara ficou tooppp, tenho uma ranger 2010 /2011 E quero colocar uma caixa de grave dessa atrás do banco , por quanto vc faz uma completa tipo essa aí ?? , qual telefo e pra contato ?
Amazing job
süper olmuş eline sağlık
great.!
Where did you get that circle cutting tool for dremel
Хороший компактный корпус!
Very nice build 👍🏽👍🏽👍🏽
Nice job
That was some cool shit man
Caracaaaasssss mano ficou muito top top👍🏻👍🏻👏🏻👏🏻 eu tenho uma subwoofer 12 de 90 X 50 X 50cm posso diminuir devido porta malas pequeno do Fox?
Do you make and sell for other people? I would like this box made for a 2001 Expedition
Wow 1.5 million views comgratulations!
longer demo music please!
Could you please inform me of the measures of your project, please? would be perfect for my trunk !! Thank you!!
Hey bro what's the spray glue you used to stick the fabric to the box?
By the way good video =)
ChicoSalsa 01 contact cement
Semen
esperma
M.N. Projects
Can u make a knife from Prince of Persia which was used by this/those Ngbaka ?
Who needs a cordless drill, when you’re able to use a screwdriver by hand much faster!
What's the port lenght? Did you do any calculations to tune the frequency? Thx.
Now thats a sweet sound.
Great vid very clean 👍
Pretty good, nice and cool project
Cleanest build ever!
We can never judge a bass of this woofer from a youtube video hahah
Well ... ruclips.net/video/hIwZjJanXag/видео.html
it sounds pretty clean compared to systems ive heard on here
i really like these making videos
That’s cool and everything but no excursion from the sub?
1.Always use screws on your boxes. Glue alone shreds from vibration.
2.This box is very small for band pass. Should be a sealed unit as long as you have enough power to drive it.
And 3. Should be facing backwards not upwards (better performance and protection of the speaker).
But i'm liking and subscribing because i love your videos.
the manufacturer recommends this small box with only 22.6 liters for this driver. And this is NOT a band pass enclosure, is a Bass reflex. Regards
@@leo83bmx71 Whats a bass reflex box? And shouldnt the port be way "longer"?
I was going to ask if that port hole is sufficent... I've seen other box builds on YT where the box port was very long!! One was a down firing JL 10TW3-D4
Parabéns.
Muito bom
today i learned what that metal piece that came with the Dremel is used for ive been trying to figure out how to do this forever n never thought just look on youtube now i can finnally redo all my crap boxes i have now thonk you
слишком высокая настройка. Сабвуфер плохой..
Объясни я просто не разбираюсь
@@maksimstolerov3444 малый обьем для 12шки , еще и фаз , глубокого баса там не услишать
Александр Ануфриев спс
Eline saglik ne guzel iscilik yapdi 👍
I have to know. Did you really cut those circles in one pass using a Dremel? Or did you go around multiple times in increments? What bit did you use?
Big big like 👍
Georgescu Nicolae