Limited Time Only: Aegis Pendant Tutorial! Public until July 31, 2024
HTML-код
- Опубликовано: 6 июл 2024
- Hi everyone! I am sharing this beautiful Aegis! Framed and Layered wire wrapped pendant tutorial, free until July 31, 2024! This is normally a Membership Only tutorial so I hope you'll enjoy it for this limited time! I am relocating my life and studio 2000 miles, so thought I'd show you all appreciation for supporting my channel during this time. I will create new content and be back on schedule beginning August 2024 from my new home and studio in New Hampshire! Thank you again!
Please remember to Subscribe to my channel, Like, and Share my wire wrapping tutorials with all your wire wrapping friends!
======================================================
Hi Members! I hope you enjoy this gorgeous freeform pendant! Aegis! This is a fun and whimsical, free-form frame that gives you quite a bit of room to just 'enjoy it'... nothing symmetrical or difficult but a gorgeous unique result each time. This technique can be applied to any shape stone or even a multiple-stone pendant (up next). I use 16 gauge wire for the main frame because of it's strength even at dead soft. I show us how to shape and hammer the big wire into a sturdy frame that will give the stone(s) good beginning security... and then I show us how to attach and use additional decorative wires to further secure the stone and make design.
I go into details about how to make those cute flared spiral ends pointy and how to taper the wire.
I talk about the important things that make the stone stay in place and I show how to hand sand the hammered elements to make them lovely and refine the look.
This is a good back to basics for hammered and layered frames, shaping, adding wires, and sanding while still being whimsical and fun!
The base frame is 15 inches of 16g round soft copper wire.
The add-on wires are 12 inches of 18g round soft copper and 12 inches of 20g round soft copper.
You can sub with or mix with square wries too!
The stone is Oval 1.25long x .75 wide and about 3mm thick, Strawberry Quartz.
My Amazon Associate Store...
www.perfectlytwistedjewelry.c...
Most of the tools you see me using can be purchased from my Amazon Associates store. I do get a small commission from Amazon when you make a purchase using my links. Thank you in advance for your support! 
Хобби
Hi everyone! I am sharing this beautiful Aegis! Framed and Layered wire wrapped pendant tutorial, free until July 31, 2024! This is normally a Membership Only tutorial so I hope you'll enjoy it for this limited time! I am relocating my life and studio 2000 miles, so thought I'd show you all appreciation for supporting my channel during this time. I will create new content and be back on schedule beginning August 2024 from my new home and studio in New Hampshire! Thank you again!
Please remember to Subscribe to my channel, Like, and Share my wire wrapping tutorials with all your wire wrapping friends!
Where in New Hampshire? I'm near Laconia.
Such an elegant design!
And as usual excellent description!
Could it also be possible to use sterling silver instead of copper, and would you use the same gauges then?
I will be near Littleton! I love the area so much, so beautiful and such cute towns!
Thank you so much! Yes, you can use Sterling and do this same design, the gauges would be the same if you are using the same size stone too. Enjoy! I appreciate your comment!
Your designs are so beautiful and, to me, look intimidating to try, BUT, you teach so well, I find myself succeeding with your tutorials! THANK YOU!!
What a lovely comment, thank you!!❣️🙏❣️🙏
This is so very nice, and thank you for sharing! your designs are always so elegant and I Greatly appreciate time given to you us. Beautiful as usual,stay safe and Ihope your move goes smoothly ❤❤❤
Thank you so much, Teri! I appreciate your sweet and supportive comment! Enjoy the tutorial and thank you for watching! xoxo
Hi Members! I hope you enjoy this gorgeous freeform pendant! Aegis! This is a fun and whimsical, free-form frame that gives you quite a bit of room to just 'enjoy it'... nothing symmetrical or difficult but a gorgeous unique result each time. This technique can be applied to any shape stone or even a multiple-stone pendant (up next). I use 16 gauge wire for the main frame because of it's strength even at dead soft. I show us how to shape and hammer the big wire into a sturdy frame that will give the stone(s) good beginning security... and then I show us how to attach and use additional decorative wires to further secure the stone and make design.
I go into details about how to make those cute flared spiral ends pointy and how to taper the wire.
I talk about the important things that make the stone stay in place and I show how to hand sand the hammered elements to make them lovely and refine the look.
This is a good back to basics for hammered and layered frames, shaping, adding wires, and sanding while still being whimsical and fun!
The base frame is 15 inches of 16g round soft copper wire.
The add-on wires are 12 inches of 18g round soft copper and 12 inches of 20g round soft copper.
You can sub with or mix with square wries too!
The stone is Oval 1.25long x .75 wide and about 3mm thick, Strawberry Quartz.
Oh thank you! Beautiful tutorial love it. Safe travels and welcome to New England!
You're in New England too? I'm in NH! Do you rock hound?
Thanks so much, Heather! 😊 I visited NH a couple of weeks ago and I love the area so much!
This is beautiful, I love your hammered swirls, thank you so much. Have a safe trip, and enjoy your new home. Love, hugs and best wishes. X❤
Thank you so much, Lesley! Hugs and appreciation to you! xoxo
Always love your tutorials! You explain everything so well!❤. 🤗. And this is a beauty!
Thank you so much, Carolyn! I'm so happy you're enjoying! 🙏🥰🙏🥰
Thank you so much for sharing your tutorials/designs..i love your designs..❤
Thanks so much, Kathy!!!🥳❣️🙏
Haven't watched but it's beautiful as usual. ❤❤
Thank you so much 😀 Hope you enjoy it, DD! xoxo
Omg this is awesome I love it! I would love to be a member but I am a single mom on the smallest income, around 600$ per month! My daughter is now 14 and wanting/needing more and more. I adore your jewelry and I thank you. Maybe I can make some great jewelry and earn some more money. I will always be so grateful to you for sharing all your amazing talents with us ❤
thank you so much, Nikki! I have a ton of free, step by step tutorials and will continue to add to them, so I appreciate YOU for being here and learning from them! I hope the jewelry you're making brings you some extra $$$. Thanks again!
I’ve never seen ANYONE use a board like yours to help them make a piece symmetrical. My mind is blown, and I think you may have solved my frustration with trying to do these pieces lol THANK YOU!!
Yay! I love it when we find new tools! Yes, I used to teach my students to work on 4 square Grid paper (4 squares = 1 inch)... but the Cricut board doesn't waste paper. 😘🥳🙏❤️. This exact board is on my Amazon Associates store if you are interested. Amazon pays me a small commission if you buy tools using my links from my store, so thank you in advance for your support! Here's my store link, the Cricut board is the first item in the catalog. 🙏❤️ www.perfectlytwistedjewelry.com/buy-tools-and-supplies.html
Thanks for watching and thanks for this awesome comment!🙏🥳
@@PerfectlyTwistedJewelry thanks! I immediately went to your website and signed up for your mailing list stuff lol. I’m, like, your newest biggest fan ❤️
I adore you for that, Thank you and welcome to my channel! 🥳🙏❣️
Love this design
Thank you! 😊 I appreciate your comment, thanks for watching!
Soooo pretty!
Thank you, Carol! xoxo I appreciate you!
I'd like to extend a 'Welcome' to New England/New Hampshire. I live in CT in southern New England.
Thanks so much, Joane! I'm very excited for the move, it's beautiful up there!
Very beautiful ❤️😍
Thank you! 😊 I appreciate you, Elizabeth!
Lovely piece! ❤
Thank you! 😊🙏❤️
I am loving this frame. Always enjoy your instruction while you are working on your masterpiece.
Thank you so much, Genni!
Beautiful!
great as always
Thanks again!
This design has it all for me. Thanks
Thank you, Pamela!! I'm so glad!
Thanks!
THANK YOU!! I appreciate you so much, Lynda!! 🙏 ❤️🙏❤️🙏
Gorgeous!!!❤
Thank you! 😊
niceeeeee
🥳❤️🙏
Thanks
Lindsay, THANK YOU so much!! I appreciate the Super Thanks, that means a lot to me!! 🙏🙏❤️🙏🙏❤️
@@PerfectlyTwistedJewelry you are SO very welcome our dearest Susan. 🥰💝
😍😍
Thank you for watching!
Eee..ahh, disaster struck omg note to self practice hammering before trying for the first time on a pendant, I was doing so well with 😂🤣 I can’t believe I’m laughing but that’s how monumentally I just royally stuffed up lol..I don’t know if I can save it, the more I hammered the worse it got 🤔😁..and here I was hoping to actually get an end product that even remotely resembled Aegis…guess I should of waited for the chasing hammer instead of using the little flat head jewellers one I have 😩 oh well hopefully I might be able to hide how bad it is…or do I ditch it and start again 🤔…I think I’ll turn the hammer over and see if the copper survives a little bit of patterning to match all the other dents lol, it’s terribly thin and may not..oh well another lesson learned 🤪🥰
Oh my dear, Seer! You are on the right track, try to add texture now to the whole thing is probably best to disguise the 'over hammered' area. Don't forget to sand the edges smooth as this will sharpen them also. If the frame is still thick enough to use, then try to use it, otherwise, yes, call it great practice and start again. I hope you can salvage your piece! Let me know how you're doing. xoxo
BOA TARDE! ONDE POSSO COMPRAR OS FIOS E OS ALICATES DE QUALIDADE, SOU DO BRASIL, TERIA QUE COMPRAR FIOS IMPORTADOS!
I'm so sorry, I simply don't know where you'd get material in Brazil. I appreciate that you watch my channel and want to make the jewelry! Perhaps ask www.youtube.com/@tracyartes he is an amazing wire artist from Brazil too! Good luck, I hope you are able to contact him.
ONDE ENCONTRAR MATERIAIS PARA TRABALHAR, NO BRASIL!
I'm so sorry, I simply don't know where you'd get material in Brazil. I appreciate that you watch my channel and want to make the jewelry! Perhaps ask www.youtube.com/@tracyartes he is an amazing wire artist from Brazil too! Good luck, I hope you are able to contact him.
Why is this for a limited time only? Hard to be interesting in subscribing if videos are going to disappear.
Thank you for watching, this is a Membership tutorial that I am sharing until the end of July. None of the videos vanish. Thanks for your comment.