Custom Skid Steer Plow Build for Bobcat MT85

We are a local lawn and landscaping company based out of Freeburg IL. Family owned/operated and started from the ground up. My brother (Nic) and I (Alex) are doing our best to build a company we will be happy to work in. It has been an adventure and a struggle at times but I wouldn’t trade it for the world! We began our journey on youtube to document our company history and we would be happy to have you along for the ride! We have big dreams and have hardly scratched the surface of where we want to be.
GET YOUR NICKENS APPAREL HERE:
teespring.com/...
Find us on:
RUclips - Nickens Lawn & Landscape
/ @nickenslandscapingexc...
Facebook - Nickens Lawn & Landscape
/ nickenslawnlandscape
Instagram - NickensLawnLandscape
/ nickenslawnlandscape
Twitter - @NickensLawn
/ nickenslawn
Also find our company website here:
Website -
Send all promotional information and offers to:
[e-mail]
We are Jobber Ambassadors! Through this link you will be offered a discount to test jobber out!!
getjobber.com/...
Some of the equipment we run:
2005 Chevy 3500 Cab Chassis Duramax, 4x4, 8’ Crysteel Dump Bed, Meyer Snow Plow and Salt Spreader
2007 GMC 3500 Cab Chassis Duramax/Allison, 4x4, 10’ Rugby Dump Bed
2003 GMC 2500 CCSB Duramax, 4x4 Meyer Snow Plow and Salt Spreader
2006 Bobcat T180, aftermarket enclosure, 6 attachments
2006 Bobcat 331 Open ROPS Buckets and Frost Ripper
2008 Rice 14’ Dump Trailer
2003 Maclander 18’ Equipment Trailer
2018 Retco 16’ Utility Trailer
Ferris Z2 52’ Kawi
Ferris FW35 52” Kawi
Scag Turf Tiger II 52” Kawi with Clam Shell Bagger
Echo Bear Cat DL10 Debris Loader
Stihl Handhelds (a lot)
Ryan Aerator 19”, honda engine
Honda Tiller
Wacker 1550 Plate Compactor, honda engine amzn.to/2r7pmQt
Target Block Saw, honda engine
7’ 6” Meyer Classic Snow Plow, E60 pump, pro wings
Meyer receiver hitch spreader amzn.to/2MwphTE
JRCO Leaf Plow amzn.to/2BB3vqF
JRCO Blower Buggy
Billy Goat Walk Behind Blower, subaru engine amzn.to/2Q1StUt
Camera gear and extras:
Canon 70 D amzn.to/2FTCFy2
18mm - 55mm Lens amzn.to/2TOqWE1
Joby Gorilla Pod amzn.to/2zwD5ou
Rode Mic amzn.to/2RjVbAX
Go Pro gear and extras:
Go pro Hero 5 amzn.to/2r71DQj
Rode Mic amzn.to/2r6spZf
Joby Gorilla Pod amzn.to/2FJUksc
Go Pro Brand Mic Adapter amzn.to/2P5ZiyS
Hard Case amzn.to/2DWVeQc

[@imperialservices9892]

Same here nasty storm coming party time 😀😀😀💰💰💰💰💰

[@nickenslandscapingexcavating]

Looks like another one on the way! 🙂

[@viktorpolovyy2059]

Need to see this in action, great job

[@nickenslandscapingexcavating]

Watch our recent video. There is a little footage of the plow in that video.

[@mattslandscaping4246]

Awesome video you guys are exactly like me if you can't buy it you make it

[@nickenslandscapingexcavating]

That’s right! We always find a way 👍🏼

[@mattslandscaping4246]

@@nickenslandscapingexcavating I fix my stuff all the time or modify stuff to make it work for me👍

[@adamdivine]

This is great. I'd like to see more videos over it if you are still using it.
How does it perform, and what is the deepest its pushed?

[@nickenslandscapingexcavating]

Works great! We have used it in the big skid too. Most it’s pushed is like 6” but it’s been great since we built it

[@mikesautomaintenance5780]

Looks sweet man I would also weld up some tops on the square tubing that runs up and down so nothing can get straight down in there and rut it out faster

[@nickenslandscapingexcavating]

Thanks man! I agree, we need to get those covered up 👍🏼

[@ricepadi29]

Hell ya nice job.

[@nickenslandscapingexcavating]

Thanks man 👍🏼

[@RiverValleyLandscaping]

I would have mounted a chain for lifting instead of rigid mounting it with the square tube. And then have a pin connection like a normal plow allowing it to have some float so you don’t have to keep adjusting the loader arms to keep the plow on the ground. This would also allow the tracks to keep full ground pressure for traction while pushing.

[@MattyDardani]

I actually did that with a skid steer plow turns out it was a bad idea for me because when you stack or hop curbs it bounces and that bouncing made the skid steer quick attach plate bent just enough where we couldn’t put any other attachments on the machine.

[@nickenslandscapingexcavating]

Like ER we tried this before and it was not enough down pressure and eventually led to things bending. The new design worked great last storm. A little learning curve but after a couple minutes we were rocking and rolling.

[@blacksmokematters4521]

Maybe we will finally get some snow next week

[@nickenslandscapingexcavating]

Finally got some! Hopefully some more this week! Ice at least

[@treadlightlyservicesllc.1930]

You're going to want to take those Factory Tracks off there if you're going to plow snow with the mini. The original bobcat C pattern tracks are trash for falling snow you need the multibar Bobcat Style.

[@nickenslandscapingexcavating]

Learned that last storm. Definitely on our list for upgrades going into next winter.

[@VigilantRocks]

Where did you get the hydraulic lines? Thanks!!

[@nickenslandscapingexcavating]

We got them at a local shop that makes them. A lot of places make hydraulic lines. You will need to get the fittings from your dealer. Your dealer can also make custom lines. They will just need to know what size thread the cylinder is

[@franciscoramirez5362]

Great work! What will you be using that machine for? Thanks for sharing!

[@drakewesterman9798]

Plowing

[@nickenslandscapingexcavating]

This will be for sidewalks at our big commercial properties

[@thewhiteknight02]

Gonna leave it big or cut down for walks?

[@nickenslandscapingexcavating]

Leaving it big for now. It worked out great last storm 👍🏼

[@williamb5449]

Broke ground on your house by now?

[@nickenslandscapingexcavating]

Yessir! Hopefully posting an update soon 👍🏼