How To Replace Front Control Arm 2010-2013 Nissan Versa
HTML-код
- Опубликовано: 4 май 2022
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASLF00335
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ front control arm with ball joint in your 2010-2013 Nissan Versa.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• 18mm Wrench
• 18mm Socket 1aau.to/ojh/1AXAA00043
• 21mm Socket 1aau.to/ojh/1AXAA00043
• 22mm Socket 1aau.to/obp/1AXAA00266
• Torque Wrench 1aau.to/onR/1AXAA00044
Subscribe: / @trq
Check out our playlist:
2007-2012 Nissan Versa 1st Generation: • 2007-2012 Nissan Versa...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Only use the red thread locker if you hate your future self. If these bolts are torqued properly, you shouldn’t need it.
Excellent video, so helpful, I was able to replace both my control arms, thanks to you, cheers
Thanks for the video was very helpful
Great Video, all the others show the other (easier) side
Brilliant. It's the best video ever.
Thanks this was helpful
Hasta que alguien subio para transmision automatica, ty man 😁
I'm having a really hard time trying to get the joint-ball to slide into the knuckle. Could you help me?
What happens if there is a rattle after?
Tighten it
Nissan Versa 2012
That’s so fucking helpful. Thank you