My biggest lesson was to slow down and enjoy the process instead of just focussing on the finished garment! Taking my time didn't actually make it take any longer because I was doing things right instead of constantly unpicking mistakes, and I actually can take pride in the final result!
This is also what I am focusing on. Years of rushing around, raising kids, working, going to school, cleaning, and trying to sew, have made me rush. Now I am retired and making things for grandkids. I am focusing on slowing down, doing quality work, and enjoying the process.
same here! I'm a very impatient person and always want a quick result whatever I do. slowing down is still a big challenge for me, but I saw that when I took things slow and focused on what I do it resulted better. being a perfectionist in a rush doesn't work when it comes to sewing :D
Agreed! A big mistake I tend to make is rushing through, becoming fatigued, and making the silliest mistakes. Seriously, if I try to sew when I'm rushed and/or fatigued, I can mess up something as simple as a pillowcase. Slow, steady, and rested is the best way to go.
Thank you for this! I'm actually learning to sew because I think that the process will be fun and satisfying. And, I've seen fabric stores so many times and felt anguish that I could not just go in them and enjoy the fabric because I didn't know anything about sewing XD
I am only just learning to sew but since you referred to the "Aha!" moments I would say a key lesson for me was in how to sew a straight line. People would keep telling me practice practice practice but not tell me what I was supposed to be doing while I practiced. It wasn't until I learned that you're not supposed to watch the needle but rather how your cloth lines up on your machine that I was finally able to do a straight stitch that didn't look like my eyes had been closed the whole time. :D
This is also how I learned to drive a car: don't focus on the vehicle in front of you, focus on the lines of the lane you're in and you'll drive straight (this also helped me stay centered in my own lane while learning with a wide van)
for me it was "how can i not be sewing a straight line," taking apart my 30ish year old thrift store sewing machine 3 times, greasing it, messing with the (HORRIBLE) top tensioner on my machine, then finally putting it back together after a frustrating day and getting a perfect, even, straight, well tensioned stitch with no jamming or needle breaking or tension issues. In hindsight I'm shocked that I persisted after opening up that thing for the first time, there's a lot of stuff going on in in a sewing machine.
The absolute best thing I've ever been told in regards to sewing straight lines is to just mark with pencil (or chalk, etc) where you want the seam to go. Not just the seam allowance/cutting line, mark an actual seam line too. I first heard this on a hand-sewing tutorial from historical costuming youtubers, but it's made machine sewing SO MUCH easier! Especially as I'm not very good at cutting out my pieces with super clean, precise lines yet, so I'm usually pretty unsure as to where exactly the stitches should go with such wonky edges, so my stitch lines were always wonky as well.
When I was in high school, my grandmother gave me a piece of fabric from her stash she didn’t know what it was, but thinking back, it looked like linen. I made a beautiful 2 piece lined suit with this lovely pink fabric. It looked and fit great. Then I washed it and the outer fabric shrank a FOOT. Wash or pretreat fabric first, especially if it is antique fabric!
Lauren it depends on the temperature of the water. Almost everything material will shrink when washed for the first time. In hotter water everything will shrik more (except for polyester things and other things from this “plastic” materials. They usually do not shrink. But even polyester may shrink a bit in really hot water. ). So if you wash linen in cold water, it may shrink a bit for the first time. And later in hotter water, it may shrink again more. Take it to account.
@@Lilly1012 - no - synthetics will not shrink, necessarily. Almost all natural fibers will shrink in hot or even sometimes warm water, and definitely through a dryer. The only time they won't is if they are pre-washed. And sometimes, they may shrink yet again, just in a much less drastic amount. Very important distinction to note about synthetic vs natural fibers. And some are not meant to get wet at all. Some silks (and other high end fabric) should never see water. Dry clean only
I just started sewing this year and I’ve already learned: 1- stop rushing and take the time to do it right 2- USE MORE PINS! Especially when cutting out the fabric so it’s cut evenly 3- read the complete instructions first- actually saves time in the end by preventing mistakes 4- don’t compare yourself to others skill level- everyone learns at different paces
Yes, you are so right. You will learn to use less pins eventually. I already sewed when I took Home Ec. My teacher knew this too. she was watching me begin to lay out and pin my pieces. She had me remove all but 2 pins from the larger main pieces. I wanted to cry. I did learn a lot that year...but she worked more with me on my own than with she was teaching the other girls. Also, sewing is very much a hands on experience. I learn by doing...in all things...lectures dont work for me.
Don’t spend a fortune on fabric then use junky thread and dull needles. Buy that nice european thread. Write notes on your pattern. Pressing was the most important improvement for me. Thanks for a great video.
Wait... what thread SHOULD I be using?? I've never used any fabrics fancier than a woven cotton, but I just blindly trusted the sticker on the spool of thread that said "all-purpose"... I honestly didn't know there was anything else out there. (Well, aside from upholstery and quilting thread. The three big thread displays at Joann's, you know)
@@mallory1304 There are a few different thread brands, but the generic 'all purpose' thread is not a nicely spun as the branded threads, They are not as strong, and little particles of the fibres that make up the thread can break and get into your machine, jamming it or worse, causing irreversible damage. I use Gutterman thread, as it is the easiest for me to buy. I do have the fluffy, cheap all purpose, but I use that for basting my pieces together. I just never use it on my machine.
3:15 poor fabric choice 4:57 not testing everything you plan to do 6:49 cutting out patterns incorrectly 10:00 read ALL the instructions! 12:30 don't skip the steps! 14:18 press as you go
This really has nothing to do with the topic, but something about your blouse struck me. The lines in your sleeve and the lines in your collar align perfectly with the lines in the main part of the shirt! I don't think my mom was that detailed, but it still reminded back eons ago when she was teaching me to sew how she emphasized matching up the lines/designs at the seams. I had forgotten all about that. I wish had continued sewing from back then, but taking it up again now. That's for all your videos!
Oh thank you! It is a refashion actually! It WAS a mens shirt! It was refashioned using my Simple Ladies Blouse Refashion workshop that is available to members of Vintage Sewing School 😀 www.vintagesewingschool.com/
I tell all new sewers whether we know it or not, we are always going to make a mock-up. You see, if we don’t intentionally make a mock-up with inexpensive material, we’ll make it with our expensive material. We’ve jumped right in making our garment and things will go wrong. Now, we have to buy all those expensive materials all over again so we can now adjust the fit, change a finish, switch needles, or threads, or both! We ALWAYS make at least one mock-up whether we planned to or not. Happy Sewing 🧵
I could not take my eyes off the collar of your blouse. Shoulder line and sleeve, how many hours pre thinking before even pinning. It is truly a beautiful piece. Thank you for the videos love your work!
My lessons include absolutely all of the ones you mentioned! The other three big ones for me were: 1, Don't rush even when you're tired and almost done. I would take my time and go carefully and slowly, then at the end I would find myself racing to finish. Now what I do when I feel that energy is put it down and walk away. 2. If you're very upset and nothing seems to be going according to plan, or the directions make no sense, walk away. For example, a weird mitered jacket sleeve hem makes no sense even though I know I've done it before, or that sleeve can't possibly fit that bodice, or what monster even wrote these instructions! Rested eyes almost always show me a fresh take on whatever was being problematic. 3. Knowing when it's time to level up. This one has been a pretty long running theme for me but I fight it. I've put the work in over a lifetime of sewing (with breaks of time where I didn't sew) but I can trust myself, and it's OK if I make a huge mess because I'll do exactly what you said, I'll look at every detail of what happened and I'll learn from it. Honorable mention: I wish someone told me to always keep learning. I consume books and videos for basic and advanced techniques because there are so many new ways of doing things. I watched your pin cushion cuff tutorial, made one, and now I can't believe I ever sewed without it!
Please do a video on different fabric contents and what they’re good for! It’s one of the most important things to know but it’s so hard to find information about.
I am slowly teaching myself to sew. I'd been putting it off because I knew (based on my body shape and past experience) that most of the patterns out there don't fit me properly without making adjustments. My "ah-ha" moment was when I discovered if I stop thinking about a pattern in terms of making a new garment and start thinking about it as an experiment with new skills, I become more confident in my sewing and I don't see any mistake along the way as failures. Instead I see them for the learning moments they are, make notes when I need to and move on without beating myself up about it. This isn't a perfect plan by any means, but it's working pretty well for now! Great video as always!🥰
What a wonderful way to look at it! I end up not starting because I don’t want to “waste” time on something that won’t fit perfectly on me. Thank you so much for sharing that wisdom. I have fabric that was gifted to me from friends and family and that is also something I don’t want to WASTE. But guess what? The original owner didn’t use and if I don’t use it, then that’s a true waste😊
@@TS-sh8xo I'm glad I could help! Definitely cut into that fabric! Gifted fabric is great (in small doses😵) but it's even better when you can use it to experiment and expand your sewing knowledge!♥️
Hello from Chicago! These extended times at home lately have helped me return to sewing after an absence. One of the standout lessons I was taught ages ago (way before the internet!) was from a sewing mentor; never stop learning, no matter the resource. As an intermediate or advanced sewer, watching beginner videos or reading beginner books seems unnecessary. But, you can always pick up something. Same goes for beginners; watch advanced techniques and read advanced books to gauge how much you understand or techniques you'd like to learn. Libraries are great resources when we can visit them again! Many people who've been stitching seams for years seem to pass over beginner resources. And a lot of beginners avoid anything labeled "advanced." Yet, for anyone on the sewing spectrum, there's always a novel way to do something, a nifty trick you might not know, or an explanation of a concept that finally clicks for you. When I was first learning to sew, I struggled with blind hems on my machine. I randomly visited the library and got a book on couture hand sewing. For fun, I worked an inch of blind hem by hand on scrap and click! my brain understood how they worked. I also knew what I needed to ask the machine to do for me. Thanks for the videos and the excellent channel. May your needles stay sharp!
Great post, I couldn't agree more. Part of my sewing enjoyment is playing with vintage sewing machines and I've always thought that they evolved to replicate the hand stitch. Watching all levels of sewing only improves the skill.
Very true words Peter and I think this relates to a lot in life. Even when you think you are advanced it is good to revisit and practice the basics as we all pick up bad habits and as a beginner I think it is important to sometimes go above your comfort level and familiarise yourself with more advance techniques to give yourself some inspiration.
Your statements are so true. I have made clothes for almost 50 yrs. I sti like to read instruction books & listen to uTude. I can always learn or be reminded of things I forgot. 😊
Love all of this! Just want to add: libraries are a great resource, but even when we can't get to them, they still have so much stuff! Obviously I can't speak for everywhere, but my local public library has a HUGE catalogue of online materials available to literally anyone who wants them (from the obvious ebooks and audiobooks; to digital comic books, movies, and music; to free subscriptions to services that are usually very pricey; to tickets to the local zoo that you can just check out and return). I really think most people would be surprised if they knew just how much libraries really offer beyond just books. It's definitely worth a poke around your local library's website to see what they have, while we're all bored at home!
Heres a tip i figured out myself: when you put your spool of thread on your machine check where the cut for your thread to tuck into is. Mos spools have a little cut on one end for the end to go into and if your spool is positioned in the correct way the thread can slip in that slit while your working and it will seem Like your machine has the tension to tight or something of that nature is wrong. I had this happen and after an hour of fiddling around with my machine I looked at the spool and behold the thread was tucked into the slit. All I had to do to fix it was take the thread out and flip the spool around.
Thank you so much for this! I certainly have made all of these mistakes and I continued making them for years until something clicked and I realized my most important mistake was not caring enough. I was not tidy and accurate enough in my sewing, just letting things slide. A crooked seam? A torn thread? Parts not matching? Oh well, it’s good enough. Never unpicking, never trying to fix things. Once I started valuing my work, time, effort and materials, it all changed.
Diana Alksne we have to make mistakes to learn anything. I bought a book about it which brought up an additional learning trick, make up mistakes you haven’t made yet. Literally TRY to make a new mistake. It allows you to relax about your mistakes and even use them for creative learning!
I thought I'd found the secret to the universe when I was shown the easy way to sew the crotch of pants together. You probably all know it now but 20 years ago, no pattern mentioned it. By the way, this is for stretch sewing. I've never made a pair of woven trousers so it may be different. Sew each "pant" side as a separate item. Sew the outside and inside seem. Then turn only one pant inside out. Put right side facing pant down into the wrong side facing pant. Starting at the crotch pin each side of the pants crotch line together to the waist. Make sure that right sides are facing each other. Sew this seem so that the body of the pants are now sewn together. Pull the leg out of the other one and , voila, the crotch seam is perfectly sewn without horrendously difficult matching.
I tried this! For extra perfection, I started at the center and make my way to one end of the seam. Then I go back to the center and sew to the other end. If you nail the crotch-cross into place with the very first stitches, there is absolutely no way at all it can skid out of place.
@@soneil7745 Glad it worked for you. I do it that way as well. My daughter didn't want me to teach her sewing and wanted to teach herself. But she got herself into a terrible muddle trying to sew some long pants and asked for help. After I showed her she never looked back.
Hi from England.Hi have been sewing for getting for 60 years. I was self taught in my early teens, sewed things without thinking, had terrible fit, stopped sewing because the results were awful then started again. I did get better through experience but I think what has made me into a better sewer is never giving up on learning and watching vloggers such as you over the past couple of years. Bad habits begat bad habits so we have to stop and learn. Thank you for doing these videos.
Sewing trousers from a fine wool garment: always have the same direction (e.g. top to bottom) even if it would be easier to sew one seam upwards and one downwards. Two way sewing on long seams makes the fabric to pull weirdly as you have them on. At least that is my experience.
@DATING HARLEY QUINN I was just going to make a cap for the first time in my life. This is such an important advice I did not see in any of the instructions. Thank You so much :)
DATING HARLEY QUINN yo me and my friend tried to make a bucket hat weeks ago and failed so hard because of the stitching and also we didn’t measure our heads properly, it was terrible. Hats are harder than they look!
My sewing epiphany was always to look ahead and find the landmarks you need to meet the next steps. For example when inserting a back zip, make sure the necklines and waistlines are going meet on each side. How many times have I forgotten that one and had to unpick? 🤗 Look ahead and match seam junctions before you get there, and keep trying the garment on as you sew. I have many garments I was in a hurry to finish and they don't fit🤣😂 And dont be lazy, put ALL the markings on your fabric before you start, don't rely on being able to figure it out later. Doh!
I am currently enrolled in your school and it seems that every lesson reveals an epiphany! lol. The classes are structured exactly the way I like short and sweet (my attention span isn't that great). My biggest challenge has been reading the instructions. It look like Japanese to me. After taking your lesson on Use Patterns I understand a great deal more about patterns! Thank you for all that you do!
I learned the hard way: making your own patterns is actually the most work. I started out with just copying and altering patterns off of clothes I already have (because that's how the much more experienced DIY ppl I watched did it and I didn't want to buy a pattern). But copying a pattern off clothes and figuring out in what order to sew is... difficult. It did make me a good dress detective (I always look at garments "how was this done") and good at altering patterns, but it was so frustrating, that I almost stopped sewing.
This is how I learnt to sew too. For me it was a god send because even as a teen standard patterns did not fit my shape. Learn this way made me prepared to try stuff out until I had something that I liked. Some modern pdf patterns are a better shape for me and I’m learning more formal design and adjustment methods. I do enjoy finding a designer who designs for my shape thus saving me all that extra work.
Brilliant video! Wish I had seen this back when I was first learning to sew. I find that the quality of the thread you use to sew makes a massive difference not only to the quality of your finished product but it affects the longevity of your sewing machine as well
Absolutely! One of the single greatest lessons I learned is to not cheap out on thread. I cheap out on a lot of things (not only with sewing notions but in general in life) but I know when to not cheap out. Years ago I stumbled across an ebay bargain - 60 spools of every colour of thread you can imagine for about $15 Cdn. Holy cow did I jump on that. Well, I learned the hard way to never, ever buy no-name thread and to steer clear of dollar store thread. Not worth the aggravation, frustration, and general thoughts of suicide as you are struggling repeatedly to complete your project as the thread is fraying, snapping, upsetting the tension on your machine, fuzzing up, knotting, getting caught in your bobbin, etc. Now-a-days, I only use Gutermann's.
I've just started sewing again after 40 years. A lot of things have come back to me, but I'm finding your videos very helpful and I realized when I was in my 20s I was always rushing.
My biggest aha-moment was realising the benefits of hand sewing. All small fiddly bits are so much easier to do by hand than machine as you have more control over every stitch and you can make neater finishes by hand, like hemming without it showing in the front. I learned to sew in elementary school (in my country sewing and woodwork, or slojd, is a mandatory subject up to 7th grade) and after we learned to use the sewing machine in 3rd grade, we almost never sew by hand. So I Think I got the impression that sewing was the same as using the sewing machine. Also, as I was a child then, my fine motor skills weren't that good, and the times when we used hand sewing (like finishing a seam after putting the filling inside a pillow), my stiches were big and horrible. Comepletely taking away the benefits of hand sewing. So it took many years for me to realise you actually can get neater (not messier) stiches by hand. I have sewn by myself for six years now and during that time I have learned to sew clothes. (I only made a total of three garments in school. With a lot of help and I remember very little of it.) So my sewing journey as an adult is completely self taught, even if I have some basics from school. I started to subscribe so I could check for myself that I haven't forgotten something important, even if I see myself as quite good nowadays at sewing. At the moment I am working on my attention to detail and doing things more presice. Fitting is also a thing I still struggle with.
Indeed! When I started to master the use of my mom's sewing machine as a teen, I thought there was simply no need to ever go back to hand sewing with a needle and thread like some kind of "pioneer". Boy, was I ignorant. No matter the amazing feats sewing machines are capable of today, some things are still best left to hand sewing. Though my machine is pretty good at button holes, I always do them by hand, always.
Thank You for an excellent video for the likes of me, a sixty something aspiring newbie sewer wishing to avoid as many newbie pitfalls as possible. Excellent!
When I was a new sewer, as a teen, I used to skip over the little finishing steps because I was in a hurry to get it done so I could wear it. I gradually realized that not finishing the seams, not pressing, etc made for a sloppy garment. Now, I'm probably the world's slowest sewer. If something doesn't look right I rip it out and redo it. I want my garment to look as good on the inside as it does on the outside. I'd say my weaknesses still are-- choosing the right fabric and necklines. I really struggle with necklines-- finishing them I mean. They don't always lay right and I don't like having thin little facings on the inside that don't stay down.
Evelyn's video on What Is Understitching!! That'll sort it out. I never knew about Understitching till today.. All the scrubby, cobbled-together dresses, tops, trousers I made years ago.. 🙄😢 Too late for them now. 😕 But anything I attempt from now on has a much better chance of sitting right! 👍😉
I'm so glad I had a elementary school teacher who really stressed reading through directions completely before starting any project, as well as making sure you understood each step, and doing research if you needed to understand an unfamiliar word or idea. This wonderful lady laid the foundation for helping me avoid many of these mistakes. I'm so glad I researched what grainline meant, because of the disaster not knowing could have caused. 🤪
I am a very round person. I always had to alter my patterns. I would mark the extra width on the paper before I ever used the pattern. I would also slice my patterns and add pieces of newspaper or tissue paper into the pattern. Especially if it was one I had to share with a sister or cousin
I love studying sewing pattern instructions. I like to know what challenges are waiting for me, and understanding thd directions. Some pattern companies are much more detailed than others. I learn some great tips that I use for other patterns. Such as collars, various types of necklines and the finish at the zipper or other opening. Making samples of these special details and keeping a library for future reference is how I learned to sew. Oh, and alot of ripping and redoing!
My mom taught me to sew as a kid. I made things with her oversight. She passed away when I was in my thirties and here I am years later trying to sew again. My big mistake was thinking I could just begin again like a professional 🤣🤣🤣 I cut out a dress using absolutely beautiful fabric and realized it needed a lining so I bought the lining material and all of a sudden realized that I had no idea what I was doing. She is not here to coach me and the directions didn’t have any information on a lining so I put the bodice together backwards LOL. Lesson? Start slowly!! I’ve since made nice garments but no where near the perfection I thought I could exhibit out of the gate🤪. So much fun, though.
Definitely have fallen foul of most of these. Press twice sew once was a tip given to me years ago. Iron your fabric before you lay out and cut. If your pattern is crumpled iron that out too. Also I learned to sew on a very old hand turn straight stich only machine, made me slow down. If it's not going right today, stop, breathe relax, sew when you enjoy it, it should be fun.
These are all great tips, especially the one about ironing the paper pattern, if it's wrinkled, as well as prewashing and ironing the fabric before you cut anything.
@@ginnyjorgensen9748 Prewashing fabric is a big one. I prewash all my fabric on the machine setting I intend on using. I learned to sew from my mum, and that is the one thing that I have done always without fail. I have made all the rest of the mistakes though. I am inspired today to sew some storage baskets to better use my storage space which needs some work.
I am complete beginner. My best tip is, Watch all of Evelyn's videos. I can hardly tell you all the ways they have helped. Pinning, grain, right side - wrong side, whew. This one is the best yet! Thank you, Evelyn.
Thank you for an amazing video! I most definitely did the "eyeballing" of grain-line and not testing (actually, I still do not test and I probably should start with it). But one thing, that I learned the hard way which was not mentioned in the video was sewing all the seams in the same direction. After I realized how important it is, all my creations magically started looking better.
Arrr yes!!!!! I remember learning that one too!! It's all these small things that add up right!! I think you'll find you will level you your end garment by doing a few quick test first! 😄 Let me know if you do start!
Kristyna C yes and no! Hahahahaha the perils of sewing a blouse neckline. The necklines sit better and do not eventually pull or twist the fabric after a year of washing machine abuse if you start the seam in the center and see to the shoulder line. Do this for left, right of front and back and you’ll find less twisting. This is especially useful on cotton fabrics and t-shirts. There truly is an exception to every rule! Hahahahaha
The more that I think about it “pressing as you go” reminds me of “saving as you draw “and “to eject your flash drive before you take it out” in my computer graphics class
Excellent points! I can think of two things right away: 1) Taking the time to prepare the fabric, pulling out threads, checking whether the grain is skewed, fixing if so (it's amazing how much fabric I buy is skew-grained!) 2) How to handle the fabric in the machine - I spent years wondering why I kept getting mismatches of length when I knew the cutting to be accurate - and the associated rippling in the seamlines.
Yes, I learned this so much recently since I ordered fabric on line several times due to current situation . Honestly, some fabrics seemed to be cut by a kid , the grain line was so screwed big time ! Really not fair just because it was an online order. I did not sent them back as I ordered from a different country. So taking off a good two inches also screwed my fabric requirements 😂😂 .
I am a new sew-er (sew-ist?) And these tips are AMAZING for someone starting out. I've made 2 things from hand and am tackling adjusting existing pieces because of your videos.
To learn what this lovely lady teaches is a small part of my interest in this videos. I most enjoy her style, her mannerisms, her vocabulary and her style of communication. All quite pleasant, well done‼️
I was absolutely GOBSMACKED when I learned there are DIFFERENT sewing feet that perform different functions, that sew different hems even! LOL I USED TO sew rolled hems on lovely scarves, years ago, but I have a permanent injury that has cost me all feeling in my right hand. It took me a year to re-learn how to type. I am nervous about turning to learning to use a sewing machine, but there is much I want to create and just need the help of the machine. I have a couple of beautiful garments with arms FAR too long but i want to recreate their lovely hems. THANK YOU so MUCH for telling me to TEST the use of the special hem foot FIRST! I didn't think of that. As an artist of many years I should have known to do that but YOU reminded me. I should get much better results when I get up the courage. Thank you SO MUCH!!!
I enjoy your informational videos and think you have great advice for beginner sewing. As someone who has done much sewing over her life ( in my 70's), I'm now making patterns for myself. Which means no instructions on how to put it together as you get with a commercial pattern. Find I have forgotten much about the order of sewing (especially for finishing around necks and armholes, etc). So wonderful to have you and others showing how to tackle a sewing project to end up with a good result. thank you for all the help you give to all of us.
Made all of the mistakes in the beginning- getting ready to get back to my sewing after a couple of years without it due to a downsize move from Texas back to my birth city in Michigan. Probably my biggest mistake in the beginning was not following the pattern’s advice with the proper fabric/s. Today I needed a fresher course. Thank you Evelyn ❤.
I’ve just “invested” in a sewing machine after 40 years of not sewing much unless I am mending or hemming. I am so excited to get started again and haven’t really sewn since I was in high school . Retirement is just around the corner so I’m so excited to have a quality machine to get restarted on. It’s so good to hear these old habits I was taught with in HS. I’m all subscribed and can’t wait for my machine to come in. Happy sewing!
Would be nice to see a comparison shot of how making the mistake affects the look or process during the video. Maybe cut away to it ? Make it easier to see the importance? And on the pattern layout hold up an actual layout diagram and a smooshed one, rather than a sheet of paper with only text on it?
Now that would be a great video , ORDER OF CONSTRUCTION (pants , blouse with sleeves and skirts ) ACCORDING TO EVELYN WOOD ! So many patterns give different methods 🤪.
What’s funny is, as you were discussing “the big view,” I stopped the video to search for a sewing video which is discuss this topic and guess who has a video available on this topic??? You Do!! Thanks in advance for providing such critical information and lessons. I appreciate you investing your time and energy into helping us newbies launch into this wonderful art form (hopefully we will do it with minimal errors) and the confidence to sew. Bless you.
Instead of rushing to get the job finished i often will leave that final hem until the next day. It often comes when ive been at it a while and a rushed hem can ruin the whole finish on a garment. Starting fresh the next day, i can take my time and get the finish i worked so hard towards for the rest of the sew.
One thing people should know is that the point you make about testing what you are going to do and how is even more important the more expensive the fabric is--because if you do not test and you make massive mistakes with expensive fabric, not only your effort and time but a lot of money can be down the drain. And if someone is trying to make a formal dress, for example, even if the person is willing to spend the money to purchase more fabric, the fabric may not be available any more--or not available in the quantity needed. (This also applies if one cuts out the pattern pieces with the grain running the wrong way--once it has been cut, it is cut; there is no way to undo that mistake on expensive fabric.) Excellent video.
Evelyn your videos are wonderful. It just occurred to me my #1 recommendation to all new sewists is this: Avoid ALL RUclips videos and books that announce, "How to do (fill in the blank) FASTER!" Avoid every single one of them. While you are learning, take the time to do things right. Evelyn stresses this repeatedly - take it to heart!
#6 applies to me. I've been sewing for @50 yrs and never knew how important ironing as you go was until recently. What a difference it makes! Things look sew much better now.
Thanks for all your videos Evelyn! My ah-hah! moments: -learning to sew a straight line by not watching the needle but making sure the fabric was lined up with the marking on the plate, just like looking ahead and not at your feet when walking -the first time I pressed a dart with a pressing ham and saw the garment take shape; I was in a sewing class and literally said out loud: "My dress has boobies - just like my me!" :D -understanding that garment construction is taking a 2-dimensional piece of fabric and turing into a 3-dimensional garment
I learned the basics at school 50 years or so ago, and remember all these things being said by my teacher. Unfortunately I wasn’t sufficiently interested at that time. I’m now a granny to 3 little girls and want to learn again so that I can make them a simple dress, and simple top and shorts. I’ve still to find a suitable pattern, so am spending most days watching your fantastic videos, and practicing sewing in straight lines!! I’m a knitter and I tell everyone... enjoy the process, and don’t be in a rush. I need to now practice what I preach when learning this new skill! Thank you.
Basting and tacking are different terms for the process of hand (or machine) sewing a seam in big/long stitches before doing your proper seam. Usually sewn inside the seam allowance. Often used when sewing multiple layers, shifting fabrics or things like gathers.
Excellent! Thanks. I first started sewing about 50 years ago (though I haven't kept up with it in the last many years), and had the opportunity to work in theatrical costume shops--which might be an interesting way to present the history of garment construction as many historical methods are still practiced to create period costumes. (So long-winded!) Anyway, I venture to recommend another tip that has meant the salvation or failure of many a project: if there is any doubt about colorfastness or shrinkage, wash or dry clean fabric before you start cutting. Actually, forget about doubt; just do it. Dry cleaning can produce just as unpredictable a result as washing. Thanks for your series; valuable information and reminders.
I just loved all these. I learned to sew about 30 years ago when a dear lady from my church took me by the hand and said "honey, I'm going to teach you to sew." We became the best of friends as she gently but firmly taught me how to properly construct a garment. Now, it's my turn to teach others. Your videos are going to help me tremendously! I love your calm and inviting manner. You make everything seem so clear. Thank you for taking the time to share your knowledge and expertise. We are all better for it!
Pleasure. Pure pleasure. Enjoy the journey. Sewing isn’t a race. Beautiful tips. I’ve sewn for 50+ years. I still make mistakes, usually when I hurry or am tired! I’m still learning! So happy I discovered you Evelyn Wood! I’m a die-hard “thrifter” and enjoy trying to re-do and re-purpose, too! I endorse the PRESSING AS YOU GO ADVICE! It takes one’s sewing from homemade to an almost seamstress level (if you sew straight seams)! I use seam guides. 😁
My biggest mistake - matching thread weight to needle size to farbric......! I didn't even realise there were different weights of thread, when I started sewing. I even bought a new sewing machine in the early days because it was skipping stitches. A different size of needle or weight of thread would have saved me a lot of money......!!!
Omg, for the first time I got the opportunity to make a great baby diaper and I couldn’t fine the right zipper for the pattern and at thee end I had to add a little more fabric to save my work, wow 😮! I never thought that a simple centimeter would affect my finishing, but I made it worked! Thank you 🙏 Lord!
LOL! When I barely knew how to thread my machine; I decided I could sew sequins, 3 inch nap faux fur, and leather. SO many broken needles and thread jamming!! Your video stopped me from going beyond my skills. Thank You!!
Thank you for this video! I’m a 56 year old guy learning to sew on my own. I’m having great fun but I spend hours watching videos and reading because there’s so much I don’t know, and I don’t know what I need to learn. For example, I looked up how to cut fabric and learned one does not simply cut fabric. First wash the fabric then press (not iron) the fabric then there’s the grain. RUclips is now suggesting a ton of “top 5 beginner sewing mistakes” and I’m watching them all! Thanks again for freely sharing your time and knowledge, I have definitely benefited from it!
I have been sewing since I was about 5 years old. I stared making doll clothes. Now I sew for myself and I love it. I still have problems with patterns fitting properly. Usually not big enough in bust area and then too big around shoulders, etc. Thank you.
Thank you! People criticize me for being too picky in my crafting and sewing, but I'm just following the lessons I learned from my Home Economics teacher in high school. They are the same lessons you cover in your videos. Do not cut corners or take shortcuts, the project will not turn out well. Another thing I've learned, especially when learning a new craft, is you WILL make mistakes and you WILL have to rip out stitches or have to re-do things. It's not going to turn out perfect the first time and that's okay...that's how you learn.
I love watching you talk through your vision of what you want to do with the project and then the step by step process as you work toward achieving the look you envisioned. I learned so much about how to use the parts of the garment that would help achieve the goal and the parts of the garment that had to be changed. The construction/deconstructions were very helpful. Of course, it was always interesting to look at the garments in a whole new way-to “see” what beautiful item might be “hiding” in a garment that someone else discarded. I have used your inspirations to try a few refashions myself and have even received compliments on some of them that people didn’t know I’d worked over. Saved me money and allowed me to wear a more “expensive” garment! A few of them ended up in the rag bag because I’m still learning, but since I only had a few dollars invested, it wasn’t the disaster it might have been if I’d been sewing on truly expensive fabric. It’s a great way to learn new techniques without breaking the bank. I look forward to seeing what you make over next because I always learn something new in each video!
Fabric choice and learning the different types of fabrics, weaves etc., finishing and mostly all of these. I've loved sewing since I was young. My grandmother was a seamstress so I started sewing with scrap fabrics. I always thought that looks good enough but now with income I can buy the fabrics that would actually suit a project I want.
I began sewing in my early teens. My most progress has been made by gaining the patience to read the instructions all the way through (at least once) before I begin sewing. Also measuring the person I’m sewing for and determining the size based on those measurements. I’m starting a dress for my daughter from a McCalls patters that is about 4 sizes larger than what she would wear off a rack. IM DYING TO KNOW ABOUT YOUR MACHINE! It looks a lot like mine but I know it has more features. I’m compiling a list of must-haves for my next machine.
I only sew simple items for the house like tablecloths, simple curtains and now the masks that almost everybody is sawing. I don't know why you pop-up on my screen, but I couldn't have been more happy to find you. Love your videos, the way you explain and have faith in us, suscribers. I hope I learn alot in your channel cause I love sewing since I was a little girl and did all the sewing with needle and thread. Now I have an old sewing machine but it can do the job. My biggest dream is to be able to sew by pattern and to learn how to take measurements on people. Have no clue where to start on measurements.
I made custom window treatments for several years for many discriminating clients and learned that planning my project down to the last detail was vitally important in avoiding costly mistakes and ensuring a final professional product. I would spend about 20-30% of my total working time in the planning phase, which gave me considerable confidence in successfully completing my project. Choosing an appropriate fabric cannot be emphasized enough. While shopping for a bridal gown for my daughter, we were disappointed in how her little belly showed through all the dresses she tried on, even lined and wearing Spanx. That was until she tried on an exquisite off the shoulder fit-and-flare gown made of Mikado silk. Not a bump in sight. The fabric draped like heavy cream over her body. We said yes to that dress!
I have been sewing for years, but only recently understood the value in cutting the notches and making sure they all line up. Also, learning from one of your other videos that the dull thudding sound my machine was making meant it was time to change the needle!!
Best advice was from my mom who is a pattern maker: rather than focusing on what you are doing, try to understand why you are doing it. 👍🏻 I think this is great life advice in general haha
My biggest problem is keeping it simple... acquiring every complicated/expensive Presser Foot that fits my machine, rather than mastering the basics, has been my experience with sewing, or with every other endeavor that I have attempted. So, since,I've committed myself to learning from you and your videos, and releasing myself for the expectation that I can figure it out myself. That is my a-haw moment that I have experienced from watching your videos now for the first time. Glad to have found you.
My biggest learning curve was learning how to figure out ease in the pattern. I used to add two inches to everything thinking this would help me fit the pattern to shape. It worked! My finished products were enormous and I’d have to make major adjustments to my finished product! Evelyn’s videos and Vintage Sewing School has taken my skills to the next level. After 30 years I’d sewing 🧵, I feel like I’m finally on course!
“Not pressing as you go” I think BEST tip! The very first dress I made, I followed a pattern with a video and when I was done, I remember being so proud and telling people “I didn’t know sewing was actually MOSTLY ironing!” 🤣😂🤷🏻♀️ feels like there’s more cutting and pressing than actual stitching! Lol
One tip I give beginners is use the best materials you can afford. Budget fabrics and threads don’t always perform the way you want in the end result. It might not be you, it might be the inferior fabrics and threads. And some of grandmas buttons are great to use but some of her fabrics have passed their sell by date. Fabrics can dry rot. You spend hours on a garment only to have it shred the first time you sit down or launder it.
I kinda disagree here. I think if you are just learning to sew that you should go as cheaply as possible. Ive even used old sheets and table cloths. You gotta give your self permission to makae mistakes and learn from these mistakes. If I had made an error on a $$10.00 piece of fabric...I would have stopped then and there...We were very poor. But if I was using bits and pieces....I would be thrilled and immediately begin my 2nd garment from the same design.
Thank you for the great video (once again)! I’m a quick learner, a perfectionist and picked up the sewing bug from my aunt and grandmother, both seamstreses, my grandmother professionally made dresses as a personal business back when women didn’t work, they kept house. In any case.... my number one mistake is not checking my pieces as I feed to make sure they aren’t folded under or in the path of the needle. I don’t know how many times I’ve managed to realize I am sewing not only the seam, but a fold from the garment as well and then have to rip stitches and go backwards. This especially as my control gets better and I try to sew faster. Slow and steady wins the race! So I am trying to get in the habit of pausing, often lifting the foot (which has other benefits in terms of ease) and making certain the seam is straight and the fabric against the table is the fabric I am sewing and not a folded under piece or a pucker, etc. Akin to this is my second one, not trying too hard to sew close to a fold, let’s say on a pocket. (Mainly I sew men’s shirts and pyjamas at the moment.). I remember doing, ripping and re-doing a shirt pocket like 5 times because I was sewing so close to the edge of the pocket fold that I kept straying off. Even with a special foot! Giving my self some “slack” and sewing evenly a little further in was less painful and looked better and I realize that AS I get better (and understand sewing foot differential pull better) THEN I can stay more consistent. All the best and keep up the great and timely videos!
I'm learning a similar thing Wayne. But then with a serger😅, imagine having that same fold and then cutting through it with the serger blade😭. I've had this happen on several garments so far. I managed to still make them wearable, but they definitely didn't turn out the way I wanted them and in one case the seam is rather weak I think. So I've also been going slow and paying attention the best I can to just sew/serge the seam and not any folds that stray in my machine's path on accident.
The last clue was the best and this video could help in the troubleshooting. I like to “sew” but I know I am no expert 😂😂😁 but I try and having several of these more experienced people share their knowledge is fantastic. Thank you, especially from those of us whom did not have mothers that knew how to sew.
I had done a bit of sewing and garment making...without a pattern, before I ever bought a pattern. Back then the instructions on the pattern envelope and on the pattern and the instruction sheet really was a life saver as far as grain. Thankfully it said which way to lay the pieces with the arrows. Many of my clothes were made from small pieces of matching fabrics from the garment factories. A local couple bought these remnants from the factory and sold it in bins. My good dresses mostly cost a total of 25 cents to $1.00. I dug and dug to find a nice check light weight knit. I actually had to piece the pieces together. There were maybe 6 pieces of cloth. I loved that blue dress, and wore it a long time. I never used edge finishing. I feel that my biggest advancement in sewing came when I decided I COULD actually make clothing using a Vogue pattern. I selected one that was difficult. I am glad I did. I took my time and it came out perfectly. I was not a new sewer at the time. I was in my 20s. The garment had a lot of pieces and had an inset yolk and sleeves with gathers and buttoned all the way down the front. Also buttoned cuffs. Of course there was a lot of top stitching and stiffening , but it was well worth it.
Fab videos. Thank you so much. I have to make sure I’m sewing the instructions from the correct version of a pattern. I made the mistake on my first garment by starting at instruction one and working my way through till almost the end when I realised I was not following the correct instructions 🤦🏻♀️
Sticking to a pre determined seam line as you cut or sew. Took me years to take that rule seriously. Now my finished projects look sharper. Your blouse is amazing.
Bad fabric choice is still my downfall. Some sewing patterns just say cotton blends or certain fabrics in light or medium weight... I still end up with projects being tossed in the waste bin..
Another great informative video bringing home lots of things Ive done wrong also. I tend to want to just get started and not read all the instructions. Ive changed!! Im now reading the instructions all the way through first, makes a world of difference. I will eventually be watching all of your videos.
Everything I made looked homemade because I did all that you mentioned. I left sewing do to time factor but I'm ready to start learning the RIGHT way. I think you was looking over my shoulder when you did this video ...thank you
Using only pins and never hand baste. I didn't even hand baste the fabric to test the fitting. I used to machine sew the joining seams and then unpick and sew again. I didn't actually think of sewing the seams by hand at first. Also hand basting works much better than pins on slippery or stretchy fabric, and when sewing several layers at once. The fabric stays better in place.
I have to say thank you to my mum for explaining properly what the grainline is and why you should take notice of it. Sounds like she has saved me some expensive mistakes.
At TAFE, many many years ago, our teacher said the pressing station should be the most popular place in the room. It really does make a difference. Great video.
While I have some experience sewing and have come across some problems I GREATLY APPRECIATE these videos!! Thank you so much for doing these. You have addressed issues that have kept me from continuing my sewing journey. I feel more confident proceeding from here on. I will now spread my wings and fly! 🥰
All great tips, but the best tip was the last one (In my opinion). I made an adjustment to a shirt sleeve but it wasnt sitting right. I have now revistited and had a new look and figured out how to put it right. Im so glad i did as i have a beautiful garment now that im happy with.
Thank you! I learned how to sew 50 years ago on Barbie Doll clothes; after that, garments were much easier but I was guilty of most of these mistakes except finishing/pressing. I hadn't sewn for many years and after seeing prices in the stores for simple linen tops decided to pick it up again and have had many "ah-ha" moments like: 1) Press the pattern and fabric before cutting after pre-washing, of course 2) Make a muslin and understand how to properly alter the pattern for a good fit - and trace the pattern onto pattern tracing paper so you can change it without destroying the original 3) If the fabric has a noticeable pattern besides checks or a plaid, LEARN HOW TO MATCH THE PATTERN WHEN CUTTING 4) Read all the instructions first - I made a sheath dress with an invisible zip and an online tip said to put in the zip first so you have it out of the way. This was out of sequence from the steps and the back was all twisted so I couldn't turn it after putting on the all-in-one facing - this would have been avoided if I'd understood the whole construction and the need for each step in sequence. Plus the right tools/accessories like correct needle and amazing presser feet for specific jobs like edge-stitching, rolled hems, or flat-felled seams.
I'm VERY new to machine sewing. I just started with the onset of the p*ndemic by making masks to donate, but I am SO excited to start new projects!!! I love seeing everyone's comments here!!! SO MUCH GOOD ADVICE!!! My advice to beginners, as a beginner, is to enjoy the process and take into account your little victories. You can always pick out a bad stitch!! And with each project, I see myself getting more confident and better in my skills. YOU CAN MAKE ANYTHING!!!! That's the coolest part. lmao
Boi, I did a lot of things you listed. Cut off grain, no basing, no pressing. After I saw all the quality up in my garments I started to follow these steps.
Thankyou for pointing these things out, Evelyn. They make perfect sense. They may seem a bit of a bind to anyone who is in a hurry to get on, but it will take less time in the end. Plus the results will be worth it. As are yours !
My biggest lesson was to slow down and enjoy the process instead of just focussing on the finished garment! Taking my time didn't actually make it take any longer because I was doing things right instead of constantly unpicking mistakes, and I actually can take pride in the final result!
I absolutely agree!!
This is also what I am focusing on. Years of rushing around, raising kids, working, going to school, cleaning, and trying to sew, have made me rush. Now I am retired and making things for grandkids. I am focusing on slowing down, doing quality work, and enjoying the process.
same here! I'm a very impatient person and always want a quick result whatever I do. slowing down is still a big challenge for me, but I saw that when I took things slow and focused on what I do it resulted better. being a perfectionist in a rush doesn't work when it comes to sewing :D
Agreed! A big mistake I tend to make is rushing through, becoming fatigued, and making the silliest mistakes. Seriously, if I try to sew when I'm rushed and/or fatigued, I can mess up something as simple as a pillowcase. Slow, steady, and rested is the best way to go.
Thank you for this! I'm actually learning to sew because I think that the process will be fun and satisfying. And, I've seen fabric stores so many times and felt anguish that I could not just go in them and enjoy the fabric because I didn't know anything about sewing XD
I am only just learning to sew but since you referred to the "Aha!" moments I would say a key lesson for me was in how to sew a straight line. People would keep telling me practice practice practice but not tell me what I was supposed to be doing while I practiced. It wasn't until I learned that you're not supposed to watch the needle but rather how your cloth lines up on your machine that I was finally able to do a straight stitch that didn't look like my eyes had been closed the whole time. :D
Thank you so much, I love the video I look forward to having a better future with my designs and your blouse was outstanding.
I learned that too from her and I have been forever thankful ever since
This is also how I learned to drive a car: don't focus on the vehicle in front of you, focus on the lines of the lane you're in and you'll drive straight (this also helped me stay centered in my own lane while learning with a wide van)
for me it was "how can i not be sewing a straight line," taking apart my 30ish year old thrift store sewing machine 3 times, greasing it, messing with the (HORRIBLE) top tensioner on my machine, then finally putting it back together after a frustrating day and getting a perfect, even, straight, well tensioned stitch with no jamming or needle breaking or tension issues.
In hindsight I'm shocked that I persisted after opening up that thing for the first time, there's a lot of stuff going on in in a sewing machine.
The absolute best thing I've ever been told in regards to sewing straight lines is to just mark with pencil (or chalk, etc) where you want the seam to go. Not just the seam allowance/cutting line, mark an actual seam line too. I first heard this on a hand-sewing tutorial from historical costuming youtubers, but it's made machine sewing SO MUCH easier! Especially as I'm not very good at cutting out my pieces with super clean, precise lines yet, so I'm usually pretty unsure as to where exactly the stitches should go with such wonky edges, so my stitch lines were always wonky as well.
When I was in high school, my grandmother gave me a piece of fabric from her stash she didn’t know what it was, but thinking back, it looked like linen. I made a beautiful 2 piece lined suit with this lovely pink fabric. It looked and fit great. Then I washed it and the outer fabric shrank a FOOT. Wash or pretreat fabric first, especially if it is antique fabric!
@Kathy Gann - I feel your pain... We had linnen curtains once... oh boy... 🤦♀️
@@violet-green-eyes9574 Is cold wash safer? I want to hem some linen curtains someday soon. They only shrink once right? 😬
Very smart and important suggestion !
Lauren it depends on the temperature of the water.
Almost everything material will shrink when washed for the first time. In hotter water everything will shrik more (except for polyester things and other things from this “plastic” materials. They usually do not shrink. But even polyester may shrink a bit in really hot water. ).
So if you wash linen in cold water, it may shrink a bit for the first time. And later in hotter water, it may shrink again more.
Take it to account.
@@Lilly1012 - no - synthetics will not shrink, necessarily. Almost all natural fibers will shrink in hot or even sometimes warm water, and definitely through a dryer. The only time they won't is if they are pre-washed. And sometimes, they may shrink yet again, just in a much less drastic amount. Very important distinction to note about synthetic vs natural fibers. And some are not meant to get wet at all. Some silks (and other high end fabric) should never see water. Dry clean only
I just started sewing this year and I’ve already learned:
1- stop rushing and take the time to do it right
2- USE MORE PINS! Especially when cutting out the fabric so it’s cut evenly
3- read the complete instructions first- actually saves time in the end by preventing mistakes
4- don’t compare yourself to others skill level- everyone learns at different paces
Yes, you are so right.
You will learn to use less pins eventually. I already sewed when I took Home Ec. My teacher knew this too. she was watching me begin to lay out and pin my pieces. She had me remove all but 2 pins from the larger main pieces. I wanted to cry. I did learn a lot that year...but she worked more with me on my own than with she was teaching the other girls. Also, sewing is very much a hands on experience. I learn by doing...in all things...lectures dont work for me.
How has your sewing improved over the year?
Don’t spend a fortune on fabric then use junky thread and dull needles. Buy that nice european thread. Write notes on your pattern. Pressing was the most important improvement for me. Thanks for a great video.
Such great tips!!
Wait... what thread SHOULD I be using?? I've never used any fabrics fancier than a woven cotton, but I just blindly trusted the sticker on the spool of thread that said "all-purpose"... I honestly didn't know there was anything else out there. (Well, aside from upholstery and quilting thread. The three big thread displays at Joann's, you know)
@@mallory1304 There are a few different thread brands, but the generic 'all purpose' thread is not a nicely spun as the branded threads, They are not as strong, and little particles of the fibres that make up the thread can break and get into your machine, jamming it or worse, causing irreversible damage. I use Gutterman thread, as it is the easiest for me to buy. I do have the fluffy, cheap all purpose, but I use that for basting my pieces together. I just never use it on my machine.
@@alonyacullinan1607 Wow, this is super helpful! Thanks!💚
I am VERY new and have been buying moon coats thread on recommendation as being better that gutermans. Would people agree with that?
3:15 poor fabric choice
4:57 not testing everything you plan to do
6:49 cutting out patterns incorrectly
10:00 read ALL the instructions!
12:30 don't skip the steps!
14:18 press as you go
thank you
Thanks
Thanks 😂😂😂
Thank you. Love her tips. But she certainly takes the long way 'round when explaining them.
Thank you sew much!!! 🤗
This really has nothing to do with the topic, but something about your blouse struck me. The lines in your sleeve and the lines in your collar align perfectly with the lines in the main part of the shirt! I don't think my mom was that detailed, but it still reminded back eons ago when she was teaching me to sew how she emphasized matching up the lines/designs at the seams. I had forgotten all about that. I wish had continued sewing from back then, but taking it up again now. That's for all your videos!
❤🏆
It is an amazing blouse, I love it.
Oh thank you! It is a refashion actually! It WAS a mens shirt! It was refashioned using my Simple Ladies Blouse Refashion workshop that is available to members of Vintage Sewing School 😀 www.vintagesewingschool.com/
I tell all new sewers whether we know it or not, we are always going to make a mock-up. You see, if we don’t intentionally make a mock-up with inexpensive material, we’ll make it with our expensive material. We’ve jumped right in making our garment and things will go wrong. Now, we have to buy all those expensive materials all over again so we can now adjust the fit, change a finish, switch needles, or threads, or both! We ALWAYS make at least one mock-up whether we planned to or not. Happy Sewing 🧵
@@PowerToolsnPearls That is a very good point!
I could not take my eyes off the collar of your blouse. Shoulder line and sleeve, how many hours pre thinking before even pinning. It is truly a beautiful piece. Thank you for the videos love your work!
Gosh thankyou! Though this top is a refashion from one of my workshops! 😀
Yup-many of us have noticed the blouse. The grid is perfect and would show off any imprecise area. It’s just so well done. 👍😷
My lessons include absolutely all of the ones you mentioned! The other three big ones for me were:
1, Don't rush even when you're tired and almost done. I would take my time and go carefully and slowly, then at the end I would find myself racing to finish. Now what I do when I feel that energy is put it down and walk away.
2. If you're very upset and nothing seems to be going according to plan, or the directions make no sense, walk away. For example, a weird mitered jacket sleeve hem makes no sense even though I know I've done it before, or that sleeve can't possibly fit that bodice, or what monster even wrote these instructions! Rested eyes almost always show me a fresh take on whatever was being problematic.
3. Knowing when it's time to level up. This one has been a pretty long running theme for me but I fight it. I've put the work in over a lifetime of sewing (with breaks of time where I didn't sew) but I can trust myself, and it's OK if I make a huge mess because I'll do exactly what you said, I'll look at every detail of what happened and I'll learn from it.
Honorable mention: I wish someone told me to always keep learning. I consume books and videos for basic and advanced techniques because there are so many new ways of doing things. I watched your pin cushion cuff tutorial, made one, and now I can't believe I ever sewed without it!
Yes!! These are the real tips that progress you on your sewing journey!
this is me..... ill now walk away
Julia Caro c
omg learning to sew with snow white? Yesss
I almost though I was the only one who got a huge snow white feeling😁
Actually ,at first I thought Minnie Mouse ...
But you are right /Australian Blanca Nieves!
Lovely.
Please do a video on different fabric contents and what they’re good for! It’s one of the most important things to know but it’s so hard to find information about.
This was so helpful! Coming across your channel is literally like finding that one holy grail teacher that gets your grade from an F to an A.
I am slowly teaching myself to sew. I'd been putting it off because I knew (based on my body shape and past experience) that most of the patterns out there don't fit me properly without making adjustments. My "ah-ha" moment was when I discovered if I stop thinking about a pattern in terms of making a new garment and start thinking about it as an experiment with new skills, I become more confident in my sewing and I don't see any mistake along the way as failures. Instead I see them for the learning moments they are, make notes when I need to and move on without beating myself up about it. This isn't a perfect plan by any means, but it's working pretty well for now! Great video as always!🥰
Kayla Johnson thanks for posting this. I needed to see this today!! 😷👍
What a wonderful way to look at it! I end up not starting because I don’t want to “waste” time on something that won’t fit perfectly on me. Thank you so much for sharing that wisdom. I have fabric that was gifted to me from friends and family and that is also something I don’t want to WASTE. But guess what? The original owner didn’t use and if I don’t use it, then that’s a true waste😊
I usually make a practice garment out of old sheets or similar and if it kinda fits I can wear as pyjamas
@@vheywood yes! I too have a lovely pile of PJs made from old sheets😁
@@TS-sh8xo I'm glad I could help! Definitely cut into that fabric! Gifted fabric is great (in small doses😵) but it's even better when you can use it to experiment and expand your sewing knowledge!♥️
Hello from Chicago! These extended times at home lately have helped me return to sewing after an absence. One of the standout lessons I was taught ages ago (way before the internet!) was from a sewing mentor; never stop learning, no matter the resource. As an intermediate or advanced sewer, watching beginner videos or reading beginner books seems unnecessary. But, you can always pick up something. Same goes for beginners; watch advanced techniques and read advanced books to gauge how much you understand or techniques you'd like to learn. Libraries are great resources when we can visit them again! Many people who've been stitching seams for years seem to pass over beginner resources. And a lot of beginners avoid anything labeled "advanced." Yet, for anyone on the sewing spectrum, there's always a novel way to do something, a nifty trick you might not know, or an explanation of a concept that finally clicks for you. When I was first learning to sew, I struggled with blind hems on my machine. I randomly visited the library and got a book on couture hand sewing. For fun, I worked an inch of blind hem by hand on scrap and click! my brain understood how they worked. I also knew what I needed to ask the machine to do for me. Thanks for the videos and the excellent channel. May your needles stay sharp!
Great post, I couldn't agree more. Part of my sewing enjoyment is playing with vintage sewing machines and I've always thought that they evolved to replicate the hand stitch. Watching all levels of sewing only improves the skill.
Very true words Peter and I think this relates to a lot in life. Even when you think you are advanced it is good to revisit and practice the basics as we all pick up bad habits and as a beginner I think it is important to sometimes go above your comfort level and familiarise yourself with more advance techniques to give yourself some inspiration.
Your statements are so true. I have made clothes for almost 50 yrs. I sti like to read instruction books & listen to uTude. I can always learn or be reminded of things I forgot. 😊
Love all of this! Just want to add: libraries are a great resource, but even when we can't get to them, they still have so much stuff! Obviously I can't speak for everywhere, but my local public library has a HUGE catalogue of online materials available to literally anyone who wants them (from the obvious ebooks and audiobooks; to digital comic books, movies, and music; to free subscriptions to services that are usually very pricey; to tickets to the local zoo that you can just check out and return). I really think most people would be surprised if they knew just how much libraries really offer beyond just books. It's definitely worth a poke around your local library's website to see what they have, while we're all bored at home!
Heres a tip i figured out myself: when you put your spool of thread on your machine check where the cut for your thread to tuck into is. Mos spools have a little cut on one end for the end to go into and if your spool is positioned in the correct way the thread can slip in that slit while your working and it will seem Like your machine has the tension to tight or something of that nature is wrong. I had this happen and after an hour of fiddling around with my machine I looked at the spool and behold the thread was tucked into the slit. All I had to do to fix it was take the thread out and flip the spool around.
oh how many times.....
Thank you so much for this! I certainly have made all of these mistakes and I continued making them for years until something clicked and I realized my most important mistake was not caring enough. I was not tidy and accurate enough in my sewing, just letting things slide. A crooked seam? A torn thread? Parts not matching? Oh well, it’s good enough. Never unpicking, never trying to fix things. Once I started valuing my work, time, effort and materials, it all changed.
Diana Alksne - That was me too! The 'Judge it' and 'That'll do' approach. LOL!
Diana Alksne we have to make mistakes to learn anything. I bought a book about it which brought up an additional learning trick, make up mistakes you haven’t made yet. Literally TRY to make a new mistake. It allows you to relax about your mistakes and even use them for creative learning!
Truer words were never spoken! Because we CAN do better.
I thought I'd found the secret to the universe when I was shown the easy way to sew the crotch of pants together. You probably all know it now but 20 years ago, no pattern mentioned it. By the way, this is for stretch sewing. I've never made a pair of woven trousers so it may be different.
Sew each "pant" side as a separate item. Sew the outside and inside seem. Then turn only one pant inside out. Put right side facing pant down into the wrong side facing pant. Starting at the crotch pin each side of the pants crotch line together to the waist. Make sure that right sides are facing each other. Sew this seem so that the body of the pants are now sewn together. Pull the leg out of the other one and , voila, the crotch seam is perfectly sewn without horrendously difficult matching.
I wish I could see a video of this, I’m a visual learner
@@lynnmaclean6787 yeah me too
@@lynnmaclean6787 have a look on utube for that too.
I tried this! For extra perfection, I started at the center and make my way to one end of the seam. Then I go back to the center and sew to the other end. If you nail the crotch-cross into place with the very first stitches, there is absolutely no way at all it can skid out of place.
@@soneil7745 Glad it worked for you. I do it that way as well. My daughter didn't want me to teach her sewing and wanted to teach herself. But she got herself into a terrible muddle trying to sew some long pants and asked for help. After I showed her she never looked back.
Hi from England.Hi have been sewing for getting for 60 years. I was self taught in my early teens, sewed things without thinking, had terrible fit, stopped sewing because the results were awful then started again. I did get better through experience but I think what has made me into a better sewer is never giving up on learning and watching vloggers such as you over the past couple of years. Bad habits begat bad habits so we have to stop and learn. Thank you for doing these videos.
Sewing trousers from a fine wool garment: always have the same direction (e.g. top to bottom) even if it would be easier to sew one seam upwards and one downwards. Two way sewing on long seams makes the fabric to pull weirdly as you have them on. At least that is my experience.
Yes definetly!!! Thankyou for adding this one! It's definetly ghing on the extended list!
Another hard lesson. Applies to knits as well.
@DATING HARLEY QUINN I was just going to make a cap for the first time in my life. This is such an important advice I did not see in any of the instructions. Thank You so much :)
DATING HARLEY QUINN yo me and my friend tried to make a bucket hat weeks ago and failed so hard because of the stitching and also we didn’t measure our heads properly, it was terrible. Hats are harder than they look!
Thanks - Don’t think I ever thought about this when I sewed more years ago. Want to get back into sewing
My sewing epiphany was always to look ahead and find the landmarks you need to meet the next steps. For example when inserting a back zip, make sure the necklines and waistlines are going meet on each side. How many times have I forgotten that one and had to unpick? 🤗 Look ahead and match seam junctions before you get there, and keep trying the garment on as you sew. I have many garments I was in a hurry to finish and they don't fit🤣😂 And dont be lazy, put ALL the markings on your fabric before you start, don't rely on being able to figure it out later. Doh!
I am currently enrolled in your school and it seems that every lesson reveals an epiphany! lol. The classes are structured exactly the way I like short and sweet (my attention span isn't that great). My biggest challenge has been reading the instructions. It look like Japanese to me. After taking your lesson on Use Patterns I understand a great deal more about patterns! Thank you for all that you do!
I learned the hard way: making your own patterns is actually the most work.
I started out with just copying and altering patterns off of clothes I already have (because that's how the much more experienced DIY ppl I watched did it and I didn't want to buy a pattern).
But copying a pattern off clothes and figuring out in what order to sew is... difficult.
It did make me a good dress detective (I always look at garments "how was this done") and good at altering patterns, but it was so frustrating, that I almost stopped sewing.
This is how I learnt to sew too. For me it was a god send because even as a teen standard patterns did not fit my shape. Learn this way made me prepared to try stuff out until I had something that I liked. Some modern pdf patterns are a better shape for me and I’m learning more formal design and adjustment methods. I do enjoy finding a designer who designs for my shape thus saving me all that extra work.
Brilliant video! Wish I had seen this back when I was first learning to sew. I find that the quality of the thread you use to sew makes a massive difference not only to the quality of your finished product but it affects the longevity of your sewing machine as well
Definetly!!
Yes! Good thread is a must!!!
Also, some sewing machines are made to work better with different brand. Ask about this or read your manual.
how do I know/judge the quality of thread??
Absolutely! One of the single greatest lessons I learned is to not cheap out on thread. I cheap out on a lot of things (not only with sewing notions but in general in life) but I know when to not cheap out. Years ago I stumbled across an ebay bargain - 60 spools of every colour of thread you can imagine for about $15 Cdn. Holy cow did I jump on that. Well, I learned the hard way to never, ever buy no-name thread and to steer clear of dollar store thread. Not worth the aggravation, frustration, and general thoughts of suicide as you are struggling repeatedly to complete your project as the thread is fraying, snapping, upsetting the tension on your machine, fuzzing up, knotting, getting caught in your bobbin, etc. Now-a-days, I only use Gutermann's.
Using the right needle in my sewing machine for the type of fabric has been a huge Eureka! moment.
I've just started sewing again after 40 years. A lot of things have come back to me, but I'm finding your videos very helpful and I realized when I was in my 20s I was always rushing.
My biggest aha-moment was realising the benefits of hand sewing. All small fiddly bits are so much easier to do by hand than machine as you have more control over every stitch and you can make neater finishes by hand, like hemming without it showing in the front.
I learned to sew in elementary school (in my country sewing and woodwork, or slojd, is a mandatory subject up to 7th grade) and after we learned to use the sewing machine in 3rd grade, we almost never sew by hand. So I Think I got the impression that sewing was the same as using the sewing machine. Also, as I was a child then, my fine motor skills weren't that good, and the times when we used hand sewing (like finishing a seam after putting the filling inside a pillow), my stiches were big and horrible. Comepletely taking away the benefits of hand sewing. So it took many years for me to realise you actually can get neater (not messier) stiches by hand.
I have sewn by myself for six years now and during that time I have learned to sew clothes. (I only made a total of three garments in school. With a lot of help and I remember very little of it.) So my sewing journey as an adult is completely self taught, even if I have some basics from school. I started to subscribe so I could check for myself that I haven't forgotten something important, even if I see myself as quite good nowadays at sewing. At the moment I am working on my attention to detail and doing things more presice. Fitting is also a thing I still struggle with.
Indeed! When I started to master the use of my mom's sewing machine as a teen, I thought there was simply no need to ever go back to hand sewing with a needle and thread like some kind of "pioneer". Boy, was I ignorant. No matter the amazing feats sewing machines are capable of today, some things are still best left to hand sewing. Though my machine is pretty good at button holes, I always do them by hand, always.
Thank You for an excellent video for the likes of me, a sixty something aspiring newbie sewer wishing to avoid as many newbie pitfalls as possible. Excellent!
Yeah! What He Said! Same for ME!
When I was a new sewer, as a teen, I used to skip over the little finishing steps because I was in a hurry to get it done so I could wear it. I gradually realized that not finishing the seams, not pressing, etc made for a sloppy garment. Now, I'm probably the world's slowest sewer. If something doesn't look right I rip it out and redo it. I want my garment to look as good on the inside as it does on the outside. I'd say my weaknesses still are-- choosing the right fabric and necklines. I really struggle with necklines-- finishing them I mean. They don't always lay right and I don't like having thin little facings on the inside that don't stay down.
Evelyn's video on What Is Understitching!! That'll sort it out. I never knew about Understitching till today.. All the scrubby, cobbled-together dresses, tops, trousers I made years ago.. 🙄😢 Too late for them now. 😕 But anything I attempt from now on has a much better chance of sitting right! 👍😉
I agree. I sew because I want a high quality garment. I have many seam rippers and sometimes they get quite a workout
I'm so glad I had a elementary school teacher who really stressed reading through directions completely before starting any project, as well as making sure you understood each step, and doing research if you needed to understand an unfamiliar word or idea. This wonderful lady laid the foundation for helping me avoid many of these mistakes. I'm so glad I researched what grainline meant, because of the disaster not knowing could have caused. 🤪
My biggest learning was drawing the seams to a pattern and then cutting easier the fabric and not ‘eye-ball’ it to 1/2 inch.
I am a very round person. I always had to alter my patterns. I would mark the extra width on the paper before I ever used the pattern. I would also slice my patterns and add pieces of newspaper or tissue paper into the pattern. Especially if it was one I had to share with a sister or cousin
I love studying sewing pattern instructions. I like to know what challenges are waiting for me, and understanding thd directions. Some pattern companies are much more detailed than others. I learn some great tips that I use for other patterns. Such as collars, various types of necklines and the finish at the zipper or other opening. Making samples of these special details and keeping a library for future reference is how I learned to sew. Oh, and alot of ripping and redoing!
My mom taught me to sew as a kid. I made things with her oversight. She passed away when I was in my thirties and here I am years later trying to sew again. My big mistake was thinking I could just begin again like a professional 🤣🤣🤣 I cut out a dress using absolutely beautiful fabric and realized it needed a lining so I bought the lining material and all of a sudden realized that I had no idea what I was doing. She is not here to coach me and the directions didn’t have any information on a lining so I put the bodice together backwards LOL. Lesson? Start slowly!! I’ve since made nice garments but no where near the perfection I thought I could exhibit out of the gate🤪. So much fun, though.
as someone who has been hand sewing for 8 years and just got my first machine ,,,, you are doing Very Important Work and are So Heavily Appreciated
Definitely have fallen foul of most of these.
Press twice sew once was a tip given to me years ago.
Iron your fabric before you lay out and cut.
If your pattern is crumpled iron that out too.
Also I learned to sew on a very old hand turn straight stich only machine, made me slow down.
If it's not going right today, stop, breathe relax, sew when you enjoy it, it should be fun.
These are all great tips, especially the one about ironing the paper pattern, if it's wrinkled, as well as prewashing and ironing the fabric before you cut anything.
@@ginnyjorgensen9748 Prewashing fabric is a big one. I prewash all my fabric on the machine setting I intend on using. I learned to sew from my mum, and that is the one thing that I have done always without fail. I have made all the rest of the mistakes though. I am inspired today to sew some storage baskets to better use my storage space which needs some work.
I am complete beginner. My best tip is, Watch all of Evelyn's videos. I can hardly tell you all the ways they have helped. Pinning, grain, right side - wrong side, whew. This one is the best yet! Thank you, Evelyn.
Thank you for an amazing video! I most definitely did the "eyeballing" of grain-line and not testing (actually, I still do not test and I probably should start with it). But one thing, that I learned the hard way which was not mentioned in the video was sewing all the seams in the same direction. After I realized how important it is, all my creations magically started looking better.
Arrr yes!!!!! I remember learning that one too!! It's all these small things that add up right!! I think you'll find you will level you your end garment by doing a few quick test first! 😄 Let me know if you do start!
Kristyna C yes and no! Hahahahaha the perils of sewing a blouse neckline. The necklines sit better and do not eventually pull or twist the fabric after a year of washing machine abuse if you start the seam in the center and see to the shoulder line. Do this for left, right of front and back and you’ll find less twisting. This is especially useful on cotton fabrics and t-shirts. There truly is an exception to every rule! Hahahahaha
Never knew that...thanks!!
The more that I think about it “pressing as you go” reminds me of “saving as you draw “and “to eject your flash drive before you take it out” in my computer graphics class
Excellent points! I can think of two things right away: 1) Taking the time to prepare the fabric, pulling out threads, checking whether the grain is skewed, fixing if so (it's amazing how much fabric I buy is skew-grained!) 2) How to handle the fabric in the machine - I spent years wondering why I kept getting mismatches of length when I knew the cutting to be accurate - and the associated rippling in the seamlines.
I think your #2 is the hidden secret to sewing!! 😄
Yes, I learned this so much recently since I ordered fabric on line several times due to current situation . Honestly, some fabrics seemed to be cut by a kid , the grain line was so screwed big time ! Really not fair just because it was an online order. I did not sent them back as I ordered from a different country. So taking off a good two inches also screwed my fabric requirements 😂😂 .
@Perma Pen UK: Can you explain #2 please?
I am a new sew-er (sew-ist?) And these tips are AMAZING for someone starting out. I've made 2 things from hand and am tackling adjusting existing pieces because of your videos.
To learn what this lovely lady teaches is a small part of my interest in this videos. I most enjoy her style, her mannerisms, her vocabulary and her style of communication. All quite pleasant, well done‼️
You are a boss if you made that top you’re wearing. The lines match up from the collar bow to bodice. What craftsmanship! Appreciate this channel.
I was absolutely GOBSMACKED when I learned there are DIFFERENT sewing feet that perform different functions, that sew different hems even! LOL I USED TO sew rolled hems on lovely scarves, years ago, but I have a permanent injury that has cost me all feeling in my right hand. It took me a year to re-learn how to type. I am nervous about turning to learning to use a sewing machine, but there is much I want to create and just need the help of the machine. I have a couple of beautiful garments with arms FAR too long but i want to recreate their lovely hems. THANK YOU so MUCH for telling me to TEST the use of the special hem foot FIRST! I didn't think of that. As an artist of many years I should have known to do that but YOU reminded me. I should get much better results when I get up the courage. Thank you SO MUCH!!!
The understitch was my "Aha!" moment. Now my garments look so much better, feels so good to see a good finish :D
I enjoy your informational videos and think you have great advice for beginner sewing. As someone who has done much sewing over her life ( in my 70's), I'm now making patterns for myself. Which means no instructions on how to put it together as you get with a commercial pattern. Find I have forgotten much about the order of sewing (especially for finishing around necks and armholes, etc). So wonderful to have you and others showing how to tackle a sewing project to end up with a good result. thank you for all the help you give to all of us.
Made all of the mistakes in the beginning- getting ready to get back to my sewing after a couple of years without it due to a downsize move from Texas back to my birth city in Michigan. Probably my biggest mistake in the beginning was not following the pattern’s advice with the proper fabric/s. Today I needed a fresher course. Thank you Evelyn ❤.
I’ve just “invested” in a sewing machine after 40 years of not sewing much unless I am mending or hemming. I am so excited to get started again and haven’t really sewn since I was in high school . Retirement is just around the corner so I’m so excited to have a quality machine to get restarted on. It’s so good to hear these old habits I was taught with in HS. I’m all subscribed and can’t wait for my machine to come in. Happy sewing!
Would be nice to see a comparison shot of how making the mistake affects the look or process during the video. Maybe cut away to it ? Make it easier to see the importance?
And on the pattern layout hold up an actual layout diagram and a smooshed one, rather than a sheet of paper with only text on it?
Peggy Cleary - I agree. Great suggestions. Would make it easier to have the visual aid
True, I know what she is talking about, but I learn visually alot better.
Now that would be a great video , ORDER OF CONSTRUCTION (pants , blouse with sleeves and skirts ) ACCORDING TO EVELYN WOOD !
So many patterns give different methods 🤪.
What’s funny is, as you were discussing “the big view,” I stopped the video to search for a sewing video which is discuss this topic and guess who has a video available on this topic??? You Do!! Thanks in advance for providing such critical information and lessons. I appreciate you investing your time and energy into helping us newbies launch into this wonderful art form (hopefully we will do it with minimal errors) and the confidence to sew. Bless you.
Your Sewing skills are Great!!!!! Ma sha Allah,
may God bless you
Instead of rushing to get the job finished i often will leave that final hem until the next day. It often comes when ive been at it a while and a rushed hem can ruin the whole finish on a garment. Starting fresh the next day, i can take my time and get the finish i worked so hard towards for the rest of the sew.
Pressing, pressing, pressing. When young I wouldn’t do it. Now, “properly” pressing has changed my life. Guilty early on of all your examples.
One thing people should know is that the point you make about testing what you are going to do and how is even more important the more expensive the fabric is--because if you do not test and you make massive mistakes with expensive fabric, not only your effort and time but a lot of money can be down the drain. And if someone is trying to make a formal dress, for example, even if the person is willing to spend the money to purchase more fabric, the fabric may not be available any more--or not available in the quantity needed. (This also applies if one cuts out the pattern pieces with the grain running the wrong way--once it has been cut, it is cut; there is no way to undo that mistake on expensive fabric.) Excellent video.
Evelyn your videos are wonderful. It just occurred to me my #1 recommendation to all new sewists is this: Avoid ALL RUclips videos and books that announce, "How to do (fill in the blank) FASTER!" Avoid every single one of them. While you are learning, take the time to do things right. Evelyn stresses this repeatedly - take it to heart!
#6 applies to me. I've been sewing for @50 yrs and never knew how important ironing as you go was until recently. What a difference it makes! Things look sew much better now.
Thanks for all your videos Evelyn! My ah-hah! moments:
-learning to sew a straight line by not watching the needle but making sure the fabric was lined up with the marking on the plate, just like looking ahead and not at your feet when walking
-the first time I pressed a dart with a pressing ham and saw the garment take shape; I was in a sewing class and literally said out loud: "My dress has boobies - just like my me!" :D
-understanding that garment construction is taking a 2-dimensional piece of fabric and turing into a 3-dimensional garment
I learned the basics at school 50 years or so ago, and remember all these things being said by my teacher. Unfortunately I wasn’t sufficiently interested at that time.
I’m now a granny to 3 little girls and want to learn again so that I can make them a simple dress, and simple top and shorts.
I’ve still to find a suitable pattern, so am spending most days watching your fantastic videos, and practicing sewing in straight lines!!
I’m a knitter and I tell everyone... enjoy the process, and don’t be in a rush.
I need to now practice what I preach when learning this new skill!
Thank you.
One of the most important things I learned in the beginning is the necessity to baste before you stitch, particularly with garments, or alterations.
What does baste even mean
Basting and tacking are different terms for the process of hand (or machine) sewing a seam in big/long stitches before doing your proper seam. Usually sewn inside the seam allowance. Often used when sewing multiple layers, shifting fabrics or things like gathers.
Excellent! Thanks. I first started sewing about 50 years ago (though I haven't kept up with it in the last many years), and had the opportunity to work in theatrical costume shops--which might be an interesting way to present the history of garment construction as many historical methods are still practiced to create period costumes. (So long-winded!) Anyway, I venture to recommend another tip that has meant the salvation or failure of many a project: if there is any doubt about colorfastness or shrinkage, wash or dry clean fabric before you start cutting. Actually, forget about doubt; just do it. Dry cleaning can produce just as unpredictable a result as washing. Thanks for your series; valuable information and reminders.
I just loved all these. I learned to sew about 30 years ago when a dear lady from my church took me by the hand and said "honey, I'm going to teach you to sew." We became the best of friends as she gently but firmly taught me how to properly construct a garment. Now, it's my turn to teach others. Your videos are going to help me tremendously! I love your calm and inviting manner. You make everything seem so clear. Thank you for taking the time to share your knowledge and expertise. We are all better for it!
Pleasure. Pure pleasure. Enjoy the journey. Sewing isn’t a race. Beautiful tips. I’ve sewn for 50+ years. I still make mistakes, usually when I hurry or am tired! I’m still learning! So happy I discovered you Evelyn Wood! I’m a die-hard “thrifter” and enjoy trying to re-do and re-purpose, too! I endorse the PRESSING AS YOU GO ADVICE! It takes one’s sewing from homemade to an almost seamstress level (if you sew straight seams)! I use seam guides. 😁
Press, press and press!! Also understitching is a crazy helpful technique for beautiful finishes!!! It can be a bit awkward but soooo worth it!
My biggest mistake - matching thread weight to needle size to farbric......! I didn't even realise there were different weights of thread, when I started sewing. I even bought a new sewing machine in the early days because it was skipping stitches. A different size of needle or weight of thread would have saved me a lot of money......!!!
Omg, for the first time I got the opportunity to make a great baby diaper and I couldn’t fine the right zipper for the pattern and at thee end I had to add a little more fabric to save my work, wow 😮! I never thought that a simple centimeter would affect my finishing, but I made it worked! Thank you 🙏 Lord!
LOL! When I barely knew how to thread my machine; I decided I could sew sequins, 3 inch nap faux fur, and leather. SO many broken needles and thread jamming!! Your video stopped me from going beyond my skills.
Thank You!!
Thank you for this video! I’m a 56 year old guy learning to sew on my own. I’m having great fun but I spend hours watching videos and reading because there’s so much I don’t know, and I don’t know what I need to learn. For example, I looked up how to cut fabric and learned one does not simply cut fabric. First wash the fabric then press (not iron) the fabric then there’s the grain. RUclips is now suggesting a ton of “top 5 beginner sewing mistakes” and I’m watching them all!
Thanks again for freely sharing your time and knowledge, I have definitely benefited from it!
I have been sewing since I was about 5 years old. I stared making doll clothes. Now I sew for myself and I love it. I still have problems with patterns fitting properly. Usually not big enough in bust area and then too big around shoulders, etc. Thank you.
Thank you! People criticize me for being too picky in my crafting and sewing, but I'm just following the lessons I learned from my Home Economics teacher in high school. They are the same lessons you cover in your videos. Do not cut corners or take shortcuts, the project will not turn out well. Another thing I've learned, especially when learning a new craft, is you WILL make mistakes and you WILL have to rip out stitches or have to re-do things. It's not going to turn out perfect the first time and that's okay...that's how you learn.
I love watching you talk through your vision of what you want to do with the project and then the step by step process as you work toward achieving the look you envisioned. I learned so much about how to use the parts of the garment that would help achieve the goal and the parts of the garment that had to be changed. The construction/deconstructions were very helpful. Of course, it was always interesting to look at the garments in a whole new way-to “see” what beautiful item might be “hiding” in a garment that someone else discarded. I have used your inspirations to try a few refashions myself and have even received compliments on some of them that people didn’t know I’d worked over. Saved me money and allowed me to wear a more “expensive” garment! A few of them ended up in the rag bag because I’m still learning, but since I only had a few dollars invested, it wasn’t the disaster it might have been if I’d been sewing on truly expensive fabric. It’s a great way to learn new techniques without breaking the bank. I look forward to seeing what you make over next because I always learn something new in each video!
Fabric choice and learning the different types of fabrics, weaves etc., finishing and mostly all of these. I've loved sewing since I was young. My grandmother was a seamstress so I started sewing with scrap fabrics. I always thought that looks good enough but now with income I can buy the fabrics that would actually suit a project I want.
I began sewing in my early teens. My most progress has been made by gaining the patience to read the instructions all the way through (at least once) before I begin sewing. Also measuring the person I’m sewing for and determining the size based on those measurements. I’m starting a dress for my daughter from a McCalls patters that is about 4 sizes larger than what she would wear off a rack.
IM DYING TO KNOW ABOUT YOUR MACHINE! It looks a lot like mine but I know it has more features. I’m compiling a list of must-haves for my next machine.
I think I found my new best friend! Easy to understand, listen to, and I didn't skip through any of it! Excellent mentor and instructor!
I only sew simple items for the house like tablecloths, simple curtains and now the masks that almost everybody is sawing. I don't know why you pop-up on my screen, but I couldn't have been more happy to find you. Love your videos, the way you explain and have faith in us, suscribers. I hope I learn alot in your channel cause I love sewing since I was a little girl and did all the sewing with needle and thread. Now I have an old sewing machine but it can do the job. My biggest dream is to be able to sew by pattern and to learn how to take measurements on people. Have no clue where to start on measurements.
I made custom window treatments for several years for many discriminating clients and learned that planning my project down to the last detail was vitally important in avoiding costly mistakes and ensuring a final professional product. I would spend about 20-30% of my total working time in the planning phase, which gave me considerable confidence in successfully completing my project.
Choosing an appropriate fabric cannot be emphasized enough. While shopping for a bridal gown for my daughter, we were disappointed in how her little belly showed through all the dresses she tried on, even lined and wearing Spanx. That was until she tried on an exquisite off the shoulder fit-and-flare gown made of Mikado silk. Not a bump in sight. The fabric draped like heavy cream over her body. We said yes to that dress!
I have been sewing for years, but only recently understood the value in cutting the notches and making sure they all line up. Also, learning from one of your other videos that the dull thudding sound my machine was making meant it was time to change the needle!!
Best advice was from my mom who is a pattern maker: rather than focusing on what you are doing, try to understand why you are doing it. 👍🏻 I think this is great life advice in general haha
My biggest problem is keeping it simple... acquiring every complicated/expensive Presser Foot that fits my machine, rather than mastering the basics, has been my experience with sewing, or with every other endeavor that I have attempted. So, since,I've committed myself to learning from you and your videos, and releasing myself for the expectation that I can figure it out myself. That is my a-haw moment that I have experienced from watching your videos now for the first time. Glad to have found you.
My biggest learning curve was learning how to figure out ease in the pattern. I used to add two inches to everything thinking this would help me fit the pattern to shape. It worked! My finished products were enormous and I’d have to make major adjustments to my finished product! Evelyn’s videos and Vintage Sewing School has taken my skills to the next level. After 30 years I’d sewing 🧵, I feel like I’m finally on course!
😊 I have now noticed I smile right back at you upon hearing your greeting! Thank you ever so much for your lovely and informative lessons!
😄😄😄 Yay!! I KNEW IT!!!!!! ❤
“Not pressing as you go” I think BEST tip! The very first dress I made, I followed a pattern with a video and when I was done, I remember being so proud and telling people “I didn’t know sewing was actually MOSTLY ironing!” 🤣😂🤷🏻♀️ feels like there’s more cutting and pressing than actual stitching! Lol
Thank you for this video. One can really see how passionate you are about sewing (or rather, how not to sew) and that's refreshing.
One tip I give beginners is use the best materials you can afford. Budget fabrics and threads don’t always perform the way you want in the end result. It might not be you, it might be the inferior fabrics and threads. And some of grandmas buttons are great to use but some of her fabrics have passed their sell by date. Fabrics can dry rot. You spend hours on a garment only to have it shred the first time you sit down or launder it.
I kinda disagree here. I think if you are just learning to sew that you should go as cheaply as possible. Ive even used old sheets and table cloths. You gotta give your self permission to makae mistakes and learn from these mistakes. If I had made an error on a $$10.00 piece of fabric...I would have stopped then and there...We were very poor. But if I was using bits and pieces....I would be thrilled and immediately begin my 2nd garment from the same design.
Thank you for the great video (once again)! I’m a quick learner, a perfectionist and picked up the sewing bug from my aunt and grandmother, both seamstreses, my grandmother professionally made dresses as a personal business back when women didn’t work, they kept house. In any case.... my number one mistake is not checking my pieces as I feed to make sure they aren’t folded under or in the path of the needle. I don’t know how many times I’ve managed to realize I am sewing not only the seam, but a fold from the garment as well and then have to rip stitches and go backwards. This especially as my control gets better and I try to sew faster. Slow and steady wins the race! So I am trying to get in the habit of pausing, often lifting the foot (which has other benefits in terms of ease) and making certain the seam is straight and the fabric against the table is the fabric I am sewing and not a folded under piece or a pucker, etc.
Akin to this is my second one, not trying too hard to sew close to a fold, let’s say on a pocket. (Mainly I sew men’s shirts and pyjamas at the moment.). I remember doing, ripping and re-doing a shirt pocket like 5 times because I was sewing so close to the edge of the pocket fold that I kept straying off. Even with a special foot! Giving my self some “slack” and sewing evenly a little further in was less painful and looked better and I realize that AS I get better (and understand sewing foot differential pull better) THEN I can stay more consistent.
All the best and keep up the great and timely videos!
I'm learning a similar thing Wayne. But then with a serger😅, imagine having that same fold and then cutting through it with the serger blade😭. I've had this happen on several garments so far. I managed to still make them wearable, but they definitely didn't turn out the way I wanted them and in one case the seam is rather weak I think. So I've also been going slow and paying attention the best I can to just sew/serge the seam and not any folds that stray in my machine's path on accident.
As a regular bloke with some sewing skills, this tutorial is an absolute gem. Yes, pressing is an absolute must! Lols
The last clue was the best and this video could help in the troubleshooting. I like to “sew” but I know I am no expert 😂😂😁 but I try and having several of these more experienced people share their knowledge is fantastic. Thank you, especially from those of us whom did not have mothers that knew how to sew.
I had done a bit of sewing and garment making...without a pattern, before I ever bought a pattern. Back then the instructions on the pattern envelope and on the pattern and the instruction sheet really was a life saver as far as grain. Thankfully it said which way to lay the pieces with the arrows.
Many of my clothes were made from small pieces of matching fabrics from the garment factories. A local couple bought these remnants from the factory and sold it in bins. My good dresses mostly cost a total of 25 cents to $1.00. I dug and dug to find a nice check light weight knit. I actually had to piece the pieces together. There were maybe 6 pieces of cloth. I loved that blue dress, and wore it a long time.
I never used edge finishing.
I feel that my biggest advancement in sewing came when I decided I COULD actually make clothing using a Vogue pattern. I selected one that was difficult. I am glad I did. I took my time and it came out perfectly. I was not a new sewer at the time. I was in my 20s. The garment had a lot of pieces and had an inset yolk and sleeves with gathers and buttoned all the way down the front. Also buttoned cuffs. Of course there was a lot of top stitching and stiffening , but it was well worth it.
Fab videos. Thank you so much. I have to make sure I’m sewing the instructions from the correct version of a pattern. I made the mistake on my first garment by starting at instruction one and working my way through till almost the end when I realised I was not following the correct instructions 🤦🏻♀️
Sticking to a pre determined seam line as you cut or sew. Took me years to take that rule seriously. Now my finished projects look sharper. Your blouse is amazing.
Bad fabric choice is still my downfall. Some sewing patterns just say cotton blends or certain fabrics in light or medium weight... I still end up with projects being tossed in the waste bin..
Another great informative video bringing home lots of things Ive done wrong also. I tend to want to just get started and not read all the instructions. Ive changed!! Im now reading the instructions all the way through first, makes a world of difference. I will eventually be watching all of your videos.
Everything I made looked homemade because I did all that you mentioned. I left sewing do to time factor but I'm ready to start learning the RIGHT way. I think you was looking over my shoulder when you did this video ...thank you
Your most welcome 😀
Using only pins and never hand baste. I didn't even hand baste the fabric to test the fitting. I used to machine sew the joining seams and then unpick and sew again. I didn't actually think of sewing the seams by hand at first. Also hand basting works much better than pins on slippery or stretchy fabric, and when sewing several layers at once. The fabric stays better in place.
hand/thread (?) basting is my new best friend! 🥰
I have to say thank you to my mum for explaining properly what the grainline is and why you should take notice of it. Sounds like she has saved me some expensive mistakes.
I will also add that even though my mum told me otherwise I have learnt the hard way to press as I go along and not to skip steps. Sorry mum.
Ha ha ha Yes I think she did!! ❤
At TAFE, many many years ago, our teacher said the pressing station should be the most popular place in the room. It really does make a difference. Great video.
While I have some experience sewing and have come across some problems I GREATLY APPRECIATE these videos!! Thank you so much for doing these. You have addressed issues that have kept me from continuing my sewing journey. I feel more confident proceeding from here on. I will now spread my wings and fly! 🥰
All great tips, but the best tip was the last one (In my opinion). I made an adjustment to a shirt sleeve but it wasnt sitting right. I have now revistited and had a new look and figured out how to put it right. Im so glad i did as i have a beautiful garment now that im happy with.
Thank you! I learned how to sew 50 years ago on Barbie Doll clothes; after that, garments were much easier but I was guilty of most of these mistakes except finishing/pressing. I hadn't sewn for many years and after seeing prices in the stores for simple linen tops decided to pick it up again and have had many "ah-ha" moments like: 1) Press the pattern and fabric before cutting after pre-washing, of course 2) Make a muslin and understand how to properly alter the pattern for a good fit - and trace the pattern onto pattern tracing paper so you can change it without destroying the original 3) If the fabric has a noticeable pattern besides checks or a plaid, LEARN HOW TO MATCH THE PATTERN WHEN CUTTING 4) Read all the instructions first - I made a sheath dress with an invisible zip and an online tip said to put in the zip first so you have it out of the way. This was out of sequence from the steps and the back was all twisted so I couldn't turn it after putting on the all-in-one facing - this would have been avoided if I'd understood the whole construction and the need for each step in sequence. Plus the right tools/accessories like correct needle and amazing presser feet for specific jobs like edge-stitching, rolled hems, or flat-felled seams.
I'm VERY new to machine sewing. I just started with the onset of the p*ndemic by making masks to donate, but I am SO excited to start new projects!!! I love seeing everyone's comments here!!! SO MUCH GOOD ADVICE!!! My advice to beginners, as a beginner, is to enjoy the process and take into account your little victories. You can always pick out a bad stitch!! And with each project, I see myself getting more confident and better in my skills. YOU CAN MAKE ANYTHING!!!! That's the coolest part. lmao
Boi, I did a lot of things you listed. Cut off grain, no basing, no pressing. After I saw all the quality up in my garments I started to follow these steps.
Thankyou for pointing these things out, Evelyn. They make perfect sense. They may seem a bit of a bind to anyone who is in a hurry to get on, but it will take less time in the end. Plus the results will be worth it. As are yours !