Considering the cost of some replacement bodies are up around $50 to get a nice looking hard body AND a whole rig underneath, you can't rage on the price at all.
@@muskokamike127yeah I’m so angry with bs economy every time I watch some video of somebody and then I want buy something he showcased it’s always an insane price
@@muskokamike127 I bought 2 from AliE, shipped to Canada for $42usd each, so under 60 canadian pesos, took one week to arrived also, if you wanna get it hurry up before the CNY holiday!
Used to think the same of the WLP trucks but as noted above, our Canadian funny money isn’t worth a lot anymore. Won’t get into why cause I think we can all figure it out. 😂
Lots of trucks including my full-size rock crawler ranger have leafs and adjustable coilovers or air shocks. I run a 63” Chevy leaf spring with my aFe 18” nitrogen air shocks(which are also springs) to compensate for trail gear, cooler etc. lots of people do this. 4Runners will squeeze coils between the leaf and Frame using the bump stop to center it. It happens a lot in performance vehicles.
The edit you did wit the radiochatter etc was great, car looks great too so the weathering worked out well.. But love the thematic part of the video for sure, keep the great job up mate!
It's nice to see a positive review of something so cheap, too many people would have criticized it for not having all the bells and whistles completely forgetting the facr it's bargain basement and a great place to start in the hobby if you haven't a lot of spare cash or your unsure whether it's for you or not. I got two cheapies before the big spend (for me), have painted the first two and now making an aluminium custom body for the other one. Not sure about the black but understand it's a test for your later build, and it's only paint, plenty more colours out there, important thing is to enjoy what you do and have fun doing it, Greetings from sunny Scotland 😊.
Great video Phil, between yours and Aaron's reviews, i had to get one. Just ordered it off of Aliexpress, and managed to snatch it up for $41.60 US with FREE shipping. Thats insane. They might as well be giving it away. I'm gonna mount an FPV camera, a bunch of scale accessories, and drive it around the house since theres so much snow outside. It's gnna be so much fun. Great video as always bud. Keep up the amazing work youre doing. 😊👊
For faded paint effect, keep the sunburned spots on the surfaces facing up, such as the roof, hood, top of fenders and bed (where the sun has been beatin' on it). I like the M2 and gunner out back though.
You got to admit this is better than WPL Jimny and D62/64. A bit of modification, and it will outperform the other ones. They have to sacrifice something to keep the prices reasonable but they sacrificed the right stuff that is easy to remedy. I really love my MN78 with the mods i made on it and i think this will be a close second or even first. The bones are good, the proportions are right, the battery is at the right location, the suspension can be tuned/upgraded, electronics can be easily upgraded, tires can be upgraded. I think this is really good, even of you leave everything stock, it's a solid beginner's rc truck. WPL could learn a lesson or two from MN
True that, the MN looks better than the WPL, also better control now with the MN82, They sacrified on the through hole parts soldering, solder blobs and janky solder points, had to go over lots of them
MN is intended for a very good RTR, because small modifications are enough. Meanwhile, WPL needs a lot of upgrades to reach the word adequate, especially considering that the WPL C74, which is the opponent of the Mn82, has entered 1/10 scale.
the new cam set up reminds me of when u used to film out ur old garage. The truck looks so cool for the money dont think u can go wrong for a model or something like what u have done to it
Remove upper steering arm, sand off about a half mm, screw arm back to servo but this time on the hole furthest, put it all back together, enjoy about a 50% steering increase
I have a few mn and wpl models and I almost never use them, to me it's more like a motorized scale model and for that price it's really hard to beat. Maybe you could find a model kit for around the same price, die cast models don't even bother to look, and they're static, I'm sort of in love with them and even I find it silly but it doesn't matter because I'm a silly guy and I llike it 😄
Great video Phil, I appreciate that you expose me to new segments. While it's not my cup of tea, I'm sure there are plenty of folks who do appreciate it. -- For me I tend to feel it fails as a model and as an RC ... but again I am trying to keep in mind that FMS "model RCs" start at more than twice this price. I guess I just feel the price jump is justified for a better product. -- I would love to better appreciate from those that are excited by this vehicle ... why they are.
Your content has convinced me you dont have to spend a ton of money on an RC car to have a ton of fun building and driving it. I meam im still gonna buy expensive ones too, but now I'm looking at cheaper stuff too when I never did before.
MN do make a 6ch receiver/transmitter for cheap but you'll have to pair it with an ESC/BEC, I plan on doing a brushless outrunner and a Blheli_s ESC :)
Hm actually I looked up the V3 RES, for the money you'll be better off with a DumboRC X6FM+receiver of choice unless you must have the sound effects lol
Well.. it's much better than WPL D62/64.. There's also a MN128 that you haven't review.. I wish you can covert your MN86 G-wagon into a really good crawler.. Would love to learn how you upgrade it..😊
Nice to see the coil front (predominantly) leaf on the rear and 5 lug rims. Marks for attention to specification. And yeah, watching 70 series on the tracks, the suspension isn't great, they are very awkward.
Perhaps predictably, I like the look you went for, Phil. I'd seen this truck and was considering asking for it for Christmas as a platform upon which to build something else. I'm glad you mentioned its small size - I realise now that it won't do for my build. I still quite want one, though, just to make a technical.
@bella0167 Then perhaps you would enjoy watching my own video masterpiece, in which I test my ex-RTR spec MN45 and find it to be awesome! I was trying to prove that you don't have to buy a WPL C44 KM to build a really capable hard-body FJ45.
For the price you really can’t complain. A WPL C24 is $54 on Banggood for US buyers anyway. I don’t know what upgrades this one has available but there are a few for the WPL. It kinda makes me want to get either one and go nuts on it just for kicks.
Cheap, nice Toyota bodyshell and drives well. That´s why I have bought one too. Arrived today and I´m happy with the stock model. I will buy the $50 all metal kit to make it perform even better. You rat look paint scratching did not worked well. You get better results in weathering with an airbrush.
Sweet Im getting one lol. I like that the hood opens and that battery location. This scale- It's just a tad longer than the WPL-C24 🤔 👍 Love that Bob Ross 😅 This is my Favorite RUclips channel! I'm still catching up on your videos. Gnarly work this truck looks great! 👌 cheers 🍻
Mn82 is 1:14, chinese "my friend" cheating as always. Have one mn82 too is nice on basic set with only Better Angle Drive (screw moved one level lower on servo). This truck love heavy weight load around 600-800gramm on middle and back.
The weakness of this RC is that the chassis is plastic so that if you look at it from the side there is a body curve that forms. between the tailgate and the cabin looks bent... the rest is very good...
The first thing I thought when you took it out the box was, same colour as his Hilux. Your work on this little truck looks prettyt cool. I dunno, it seems the line between toy and hobby has gotten a little blurred recently.
Toy grade just means it was never intended to get spares or upgrades for the rc, and has non proportional steering (100% left or right steering only, no in between)
When ever you get the chance. You should try MNM's newest Kit model. MN111. It's a big game changer. It's a little more expensive than the rest of their models tho.
I think it would be great to compare it to WPL C74 Jimny as they're similar price and from my observations they are often considered a "cheap entry crawler"
Maybe the weathering would have been easier while the paint was a little damp still? Still looks pretty sweet. Would be more of a display model for me rather than an RC I would plan on actually using.
Get it here: s.click.aliexpress.com/e/_De7s4lj
Win some RC Cars: raffall.com/tomleyrc
No.
@@dazofthemoo1531 okay.
Yes, and maybe a Tonka Jeep conversion! Love the leaf springs.
Straight out of some african army or some meddle east terrorist group 😂😂
sucks that when these videos go up they crank up the price, its over 60 dollars now.
For $50 it’s got nice detail. It drives it steers. I really can’t see how you could go wrong. Thanks as always.
Considering the cost of some replacement bodies are up around $50 to get a nice looking hard body AND a whole rig underneath, you can't rage on the price at all.
Yeah, I mean.. it’s no crazy performer, but at the price, not much else to chose from
@@TomleyRC Unfortunately it's $83+ cdn which kind of spoils the deal. Our crappy gov't devaluing our dollar really hurts.
@@muskokamike127yeah I’m so angry with bs economy every time I watch some video of somebody and then I want buy something he showcased it’s always an insane price
@@muskokamike127 I bought 2 from AliE, shipped to Canada for $42usd each, so under 60 canadian pesos, took one week to arrived also, if you wanna get it hurry up before the CNY holiday!
Used to think the same of the WLP trucks but as noted above, our Canadian funny money isn’t worth a lot anymore. Won’t get into why cause I think we can all figure it out. 😂
I have bought this MN82. I was amazed by the quality of the plastic and the fine and amazing details. And their quality control is very good...
Love how all these officially licensed products never have trademark or registration marks next to the brand logos.
Loved the themed part at 9:37
If you play it back in .75 speed looks even better, less like a model
Lots of trucks including my full-size rock crawler ranger have leafs and adjustable coilovers or air shocks.
I run a 63” Chevy leaf spring with my aFe 18” nitrogen air shocks(which are also springs) to compensate for trail gear, cooler etc. lots of people do this. 4Runners will squeeze coils between the leaf and Frame using the bump stop to center it. It happens a lot in performance vehicles.
The edit you did wit the radiochatter etc was great, car looks great too so the weathering worked out well.. But love the thematic part of the video for sure, keep the great job up mate!
Now you've got me brainstorming up ideas, like some kind of Mad Max-style rig for my Dreadnoks to use against G.I. Joe. 😁
It's nice to see a positive review of something so cheap, too many people would have criticized it for not having all the bells and whistles completely forgetting the facr it's bargain basement and a great place to start in the hobby if you haven't a lot of spare cash or your unsure whether it's for you or not. I got two cheapies before the big spend (for me), have painted the first two and now making an aluminium custom body for the other one. Not sure about the black but understand it's a test for your later build, and it's only paint, plenty more colours out there, important thing is to enjoy what you do and have fun doing it, Greetings from sunny Scotland 😊.
Great video Phil, between yours and Aaron's reviews, i had to get one. Just ordered it off of Aliexpress, and managed to snatch it up for $41.60 US with FREE shipping. Thats insane. They might as well be giving it away. I'm gonna mount an FPV camera, a bunch of scale accessories, and drive it around the house since theres so much snow outside. It's gnna be so much fun. Great video as always bud. Keep up the amazing work youre doing. 😊👊
Nice! I got one for only $39
1:28 ...I like this new camera angle.
For faded paint effect, keep the sunburned spots on the surfaces facing up, such as the roof, hood, top of fenders and bed (where the sun has been beatin' on it). I like the M2 and gunner out back though.
Thanks for the sharpies for taillight colors tip!
Sharpies fade with UV, I think proper clear acrylic paint is the way to go
You got to admit this is better than WPL Jimny and D62/64. A bit of modification, and it will outperform the other ones. They have to sacrifice something to keep the prices reasonable but they sacrificed the right stuff that is easy to remedy. I really love my MN78 with the mods i made on it and i think this will be a close second or even first. The bones are good, the proportions are right, the battery is at the right location, the suspension can be tuned/upgraded, electronics can be easily upgraded, tires can be upgraded. I think this is really good, even of you leave everything stock, it's a solid beginner's rc truck. WPL could learn a lesson or two from MN
True that, the MN looks better than the WPL, also better control now with the MN82, They sacrified on the through hole parts soldering, solder blobs and janky solder points, had to go over lots of them
MN is intended for a very good RTR, because small modifications are enough. Meanwhile, WPL needs a lot of upgrades to reach the word adequate, especially considering that the WPL C74, which is the opponent of the Mn82, has entered 1/10 scale.
Nice to see they mounted to servo low down on the front axel. I had to do this mod on my mn99s.👍
I just ordered the parts to do that to my MN99S then I ordered the tan MN82 from AliExpress because it was cheap with good reviews
I lived my 99s , I just ordered this as a replacement 😅
Fantastic!! Paint job worked out great! Makes it tough to spot any poop tho 🤔
haha... Poop Camo
@@TomleyRC 😅🤘
Love these mini project videos, nice job Tom!
pretty damn good for that price! Try hair spray or chipping fluid on your silver base coat before the black top coat to get the worn look
Love the big, dramatic musical score to a toy truck with a plastic guy standing on the flat bed. 😆
Love it ! Love your vids. I'm a first time watcher. Excellent !
Congrats for 1000vids Phil🍾🎉🥳
Thanks dude!
Continue like this, im a big fan and live your vids, their are original and not with 2k rc to have fun. Keep un the work, you deserve more subscribers
Bruh was for phil not ya
Have waited for this review for so long, finally it's here!
the new cam set up reminds me of when u used to film out ur old garage. The truck looks so cool for the money dont think u can go wrong for a model or something like what u have done to it
Yes, reminds me a bit of that as well
love the look and yes it performs better than the low price suggests, nicely done
I love that you get unusual stuff in to review, top job!
Remove upper steering arm, sand off about a half mm, screw arm back to servo but this time on the hole furthest, put it all back together, enjoy about a 50% steering increase
Blimey!!! That's a turn up for the books!! 😎👍🏻
Awesome finished product ❤ Sure you’ll do more with it.
I have a few mn and wpl models and I almost never use them, to me it's more like a motorized scale model and for that price it's really hard to beat. Maybe you could find a model kit for around the same price, die cast models don't even bother to look, and they're static, I'm sort of in love with them and even I find it silly but it doesn't matter because I'm a silly guy and I llike it 😄
Looks awesome. Love that your getting into 3d printing very exciting.
Finally you review for MN82. Is been a while I waiting for it since on early January. Great custom paint and I like the 3D print Gun.. 😅
Thought you were gonna spin the box a couple more times!!! lol! Great review. Love the honesty.
That really isn't bad for the price. Love what you did with it too buddy.
Really nice paint Job ! Love it !
Loved the drivers and weathered look. The crooked license plate tied everything together 😆
Great video Phil, I appreciate that you expose me to new segments. While it's not my cup of tea, I'm sure there are plenty of folks who do appreciate it. -- For me I tend to feel it fails as a model and as an RC ... but again I am trying to keep in mind that FMS "model RCs" start at more than twice this price. I guess I just feel the price jump is justified for a better product. -- I would love to better appreciate from those that are excited by this vehicle ... why they are.
Your content has convinced me you dont have to spend a ton of money on an RC car to have a ton of fun building and driving it. I meam im still gonna buy expensive ones too, but now I'm looking at cheaper stuff too when I never did before.
Cheap can also get expensive, I think I spent 5x over in parts, tools and whatnot to upgrade this little guy hahahha
Axial scx24 can get expensive in upgrades, looking more into such, fixes any bad surprises
Damn you Phil 😂 stop making me wanna spend money lol great video ❤
I really really like the new camera angle!
Red oxide paint,,, put some drops of water here and there,, put some salt on the water,, paint,,, knock of the salt,,, gives a good rusty, crusty look
I ordered this red one. I found a alloy kit with wheels and axles. Alloy links and 2 shocks (front) for around $41. I will be ordering it.
You can get oil dampen shocks and also portal axles but more $$ haha
Given that this is 1/16 not 1/12 as advertised, that means that you could upgrade it with WPL v3 electronics and metal parts.
Yes, I think that would work good. Although I think MN do their own axels as well
@@TomleyRC there's even a portal axle haha
MN do make a 6ch receiver/transmitter for cheap but you'll have to pair it with an ESC/BEC, I plan on doing a brushless outrunner and a Blheli_s ESC :)
Hm actually I looked up the V3 RES, for the money you'll be better off with a DumboRC X6FM+receiver of choice unless you must have the sound effects lol
This is a very good review. It looks good and I liked your apocalyptic version.
Yes, that was the idea
That price point is incredible. It leaves you room to spend on any upgrades you want.
Great job Phil, what an awesome build! Just goes to show how you can make a cheap RC vehicle really cool inexpensively!
Very nice weathering, reminiscent of the Enduro Ecto.
Looks even better in the black!
Love the COBRA emblem on the ammo can.
Well.. it's much better than WPL D62/64.. There's also a MN128 that you haven't review.. I wish you can covert your MN86 G-wagon into a really good crawler.. Would love to learn how you upgrade it..😊
The WPL C54 is the one to get, then upgrade with a hobbywing esc, 2 speed gearbox and metal diffs etc and you have an epic crawler for not alot
MN128.......worth a look too....great scale train truck
Cool truck, nice job on the paint!🎉
It's a good truck, I put some wpl wheels with soft tyres on mine, but I'm waiting for my metal upgrade kit to arrive. 😊
For £50 can’t complain, not sure why you painted it when it’s like a mini version of your own truck haha
Get the mn168 as you will love it
Can you do video about the new yk4106 g wagon
LOL... ❤ That driving "movie" style... wow.
And, as per usual, upon viewing this review .....I now want one of these !
You did a good job on the painting Phil. Looks good
Cheers dude
Nice to see the coil front (predominantly) leaf on the rear and 5 lug rims. Marks for attention to specification. And yeah, watching 70 series on the tracks, the suspension isn't great, they are very awkward.
The truck gave me Halo reach vibes at the end
Thx
Perhaps predictably, I like the look you went for, Phil. I'd seen this truck and was considering asking for it for Christmas as a platform upon which to build something else. I'm glad you mentioned its small size - I realise now that it won't do for my build.
I still quite want one, though, just to make a technical.
Stop thinking..just do it there cheap to buy I've got all MN RC Models I'm mean all MN RCs..
@bella0167 Then perhaps you would enjoy watching my own video masterpiece, in which I test my ex-RTR spec MN45 and find it to be awesome!
I was trying to prove that you don't have to buy a WPL C44 KM to build a really capable hard-body FJ45.
For the price you really can’t complain. A WPL C24 is $54 on Banggood for US buyers anyway. I don’t know what upgrades this one has available but there are a few for the WPL. It kinda makes me want to get either one and go nuts on it just for kicks.
I like the new camera angle :)
My RC trucks look weatherd just from me driving them all the time 😅 I saw that Fox sticker on your Toyota , looks good
Cheap, nice Toyota bodyshell and drives well. That´s why I have bought one too. Arrived today and I´m happy with the stock model. I will buy the $50 all metal kit to make it perform even better.
You rat look paint scratching did not worked well. You get better results in weathering with an airbrush.
Your new look is great, the chrome needs some weathering though to match.
With some plate weight hidden around it, it would have some potential for sure. That's hard to beat for $50!
Sweet Im getting one lol.
I like that the hood opens and that battery location.
This scale- It's just a tad longer than the WPL-C24 🤔 👍
Love that Bob Ross 😅
This is my Favorite RUclips channel! I'm still catching up on your videos.
Gnarly work this truck looks great! 👌 cheers 🍻
Just ordered one for 32 bucks with free shipping, figured having a little trail truck for the summer instead of my smaller 24 and 18 rigs
Mn82 is 1:14, chinese "my friend" cheating as always. Have one mn82 too is nice on basic set with only Better Angle Drive (screw moved one level lower on servo). This truck love heavy weight load around 600-800gramm on middle and back.
The weakness of this RC is that the chassis is plastic so that if you look at it from the side there is a body curve that forms. between the tailgate and the cabin looks bent... the rest is very good...
Just bought one! Awesome video!
I CANT Believe how that guy in the back of the Landcruser can stand an stay still.The mind Boggles 😳
Good core stability 👌😇
IT'S A SHELF QUEEN
Great job and awesome video, thanks for sharing.
Looks absolutely great 👍🏻
Cheers dude
Nice look. After all said and done. Can't bear the price. Thx. for the review. ✌️👍
Ooh, I hope your major project is also Mad Max-related! 😁
I got my WPL c24-1 RTR ... it is amazing. Thank you. GI Joe Lost his legs an part his hips too. I amhaving so much fun with the RC's
Welcome to 3d printing ! Good you enjoy it
I've been 3D printing for a few years dude... just never really talk about it :)
@@TomleyRC ok nice
Looks cool! You definitely made it way cooler!! And all of us Americans like big 50 cals!! But Labron driving?? Hmmm
Very cool little rig.
Most awesome paint job keep doing what you do thank you
Nice work! I like the crooked license plate :)
Dark weathered mad max style then you see a bright orange Gatorade jug in the back 😂
Looks good and nice custom job.
Cheers dudes
Great paint job looks awesome
Nicely done Phil
About time we had another decent MN, i still love my MN99 land rover... This seems like something i need to acquire. Btw have pmed you.
The first thing I thought when you took it out the box was, same colour as his Hilux. Your work on this little truck looks prettyt cool.
I dunno, it seems the line between toy and hobby has gotten a little blurred recently.
Toy grade just means it was never intended to get spares or upgrades for the rc, and has non proportional steering (100% left or right steering only, no in between)
That is cool!! Love it‼️👍👍🦾🦾🤘🤘
When ever you get the chance. You should try MNM's newest Kit model. MN111. It's a big game changer. It's a little more expensive than the rest of their models tho.
Great work the the body Phil buddy . I love this weathered look .
Awesome work 🤙🤙🤙🤙🤙
Cheers Chris...
...with a C :)
I think it's worth every penny.
Should put diddy driving with lebron in the back 😂
Nice work on that truck ❤👍👍✌️👊👊👊👊👍
I think it would be great to compare it to WPL C74 Jimny as they're similar price and from my observations they are often considered a "cheap entry crawler"
This performs better. I have the Jimny, and it’s underpowered. Good body though 👌
Maybe the weathering would have been easier while the paint was a little damp still? Still looks pretty sweet. Would be more of a display model for me rather than an RC I would plan on actually using.
Re the paint choice, I was thinking of starting with the dark metallic gray body first
Cool little truck after you did your mods 👌. It almost looks like the WPL truck, and maybe WPL parts like metal axles fit🤔