Old Hand Wringer - Restoration - WorkshopDC
HTML-код
- Опубликовано: 21 авг 2024
- #Restoration #WorkshopDC #ASMR #HandWringer
Old Hand Wringer - Restoration
Hi guys! How are you doing?
In today video i show how to restore a old hand wringer.
Undortunately i don't know anything about this piece, the only thing i know is that this tool was used to wringe clothes in the past.
Any information abaut the brand and how many years this Wringer have.
To star the restoration i use some Wrenchs and pipe wrench, there was some parts that don't leave so the better way to remove those parts is put in a Vinegar bath.
After 1 day on vinegar bath i try to disassemble again, and this time all worked well with a penetrating oil.
With all parts disassembled i brush all them with a strong degreaser, the old paint melt and i wash it away off camera.
Now i remove all the casting imperfections with a file, but some past marks still are in the surface. I didn't wanted to make a super smooth finish.
After that i remove the deep rust with water and hydrochloric acid for 4 hours.
Then i fill some holes and sanded all with a sandpaper 120G to 220G.
To paint i used 2 coats of Primer and 2 coats of Red.
Some parts i wire brush and sand with 220G sand paper.
To restore the wringers i brush wire and sand with a 220G to 400G sand paper, i don't find any way to fill the imperfection in the wringer, and that part doesn't fit on my lathe.
I make a wood handle on lathe and applied 2 coats of varnish.
Now is time to assemble all.
With the assemble done i make a test time.
This tool work good but it's hard to work with.
Protection Equipments:
- Gloves;
- Goggles;
- Hearing Protection;
- Mask;
Products Used:
- Degreaser;
- Spray Red;
- Primer;
- Penetrating Oil;
Equipmentis used:
- BenchGrinder;
- Pipe Wrench;
- Wrenchs;
Thanks for watching!
And if you notice some english mistake please tell me in the comments, english is not my main language.
I'm trying my best to make a better content for you, so don't forget to subscribe, comment, share, like and hit the bell notifications, it helps me a lot!
If you want to help the channel with any value, please make a Pix with this key - workshopdcdiy@gmail.com
My Instagram - / workshopdcof
My Facebook - / workshopdcof
![Why Did They Stop Making These? [Restoration]](/img/1.gif)
awsom very nice.i remember those.
Beautiful restoration, looks amazing!🤩👍👍
Thanks Dirty! ❤️
Good job 👍
Thanks! ❤️
amazing work
Thanks! ❤️
I wish I had one of these.
Here in Brazil this piece is kinda easy to find. Thanks for comment! ❤️
Another job well done 👍 👍 👍
Thanks Brent! ❤️
Great restoration of an uncommon item! Thanks for sharing!
Thanks Jack! ❤
Nicely done 👍👍👍Thanks for sharing
Thanks Yeager! ❤️
Good job, getting ready for off grid.
Thanks! ❤️
Hi guys! Do you like the video?
Please don't forget to Subscribe!
With Love - DC ❤
Great restoration! The result looks awesome!
Thanks! ❤
Bom trabalho, parabéns! Pra mim isto é um cilindro de pão antigo, já vi muitos, espremedor de roupas nunca vi no Brasil. Para remover ferrugem você pode usar uma solução de ácido cítrico, não é caro nem muito difícil de encontrar. Parabéns!
Muito obrigado! Está peça é um espremedor de roupas mesmo, não sei se fica perceptível no vídeo mas os rolos não são alinhados e a peça tem quase 40 centímetros de comprimento o que é grande. Já restaurei um cilindro para massas e ele é pequeno. Feliz Ano Novo! ❤️
@@WorkshopDC Pra vc também!!
Good restoration good job well done
Thanks Vince! ❤️
Sucesso.
Muito obrigado Roberto! ❤️
Nice job in this restoration.
Thanks! ❤️
Turned out great 👍 nice work
Thanks! ❤️
You did a wonderful job restoring it it looks excellent!!
Enjoyed your video and I gave it a Thumbs Up
Thanks Oneshot! ❤️
@@WorkshopDC You're welcome!!
great job
Thanks! ❤️
Really appreciate it 👏👏🤝
Thanks Mate! ❤️
I kept wondering what the rollers were made from. At first I thought they were stone, was surprised to see they were metal. Very cool.
I think it's zinc but i'm not a 100% sure. Thanks Pit! ❤️
Minha mãe tinha isso quando eu era pequeno, mas era pra fazer massa de pastel! haha
Sim, existe outro modelo que também restaurei em um video passado que era para passar massas.
São modelos diferentes, esse é maior e mais pesado.
6:22 those look pretty suuus
Massa cara, parabéns 🤜🤛
Muito obrigado Wellington! ❤️
I don't like to criticise these projects because I know there's a lot of effort put into them and the end result looks great, but...
You did not need to use all of that filler, most of the imperfections could have been sanded out using various grades of wet n dry papers. And, if you are going to clamp threaded parts in a bench vice, use rubber or aluminium jaws to prevent damage.
Thanks for the tip, this time I really put a lot of filler hehe'.
I do remember wringer type washing machines. However, you don't get your hands caught in one of them. Not a pretty situation... Thumbs Up!
I almost do that to see what will happen 😂😂
Thanks Gary! ❤️
👍🏼👍🏼👍🏼
Glad to see you here! Thanks Bro! ❤️
👍👍👍👍
👍❤️
Sempre um excelente trabalho. Parabéns. Me diz uma coisa. Estou atrás de um torno assim. Pode me dizer o valor aproximado?
Valeu 🤘🤘🤘
Muito obrigado Marcello. Um torno de madeira deste custa hoje em dia de 1800 a 2000 reais.
Севжий 😯📺👏👍👍👍👍👍👍👍👍👍 работа ремонт поздравляю счастья здоровья любви малярный 😃😃😃🤑🤑🤑🤑😅😅😅😅😅😅😅😅🎉💋🎀🌹🤗
Большое спасибо! ❤
Отжиматель рук😱
Dude, I think you need a new wire wheel.
I really need! Hehe'
Thanks for Watching! ❤️
I bet if companies that make metal fillers watched these restoration videos, they would want to give the guys sponsorships based on how much they use. Haha
You need to buy a new wire wheel. If not for safety but for use ability.
Yep, I really need! Thanks Mike! ❤️