DIY Steering Wheel Pedals H-Shifter - Arduino | Part 1
HTML-код
- Опубликовано: 22 авг 2024
- This video explain how to build and install DIY Steering Wheel, Pedals, and H-Shifter for Gaming.
DIY Steering Wheel with Force Feedback - Arduino | Part 2 adf.ly/1813942...
Original tutorial from www.racingfr.co...
Thanks for EbolzMagy tutorial in kaskus subscribe / @ebolzzable
INDONESIAN COMMUNITY
adf.ly/1813942...
DOWNLOAD
AI WAVE 2016 wheel config
www.aiwave.fr/w...
FIRMWARE
www.aiwave.fr/d...
(Don't click, Just right click and save as)
XLOADER
drive.google.c...
DXTweak2-32bit
www.force-dynam...
DXTweak2-64bit
www.force-dynam...
If you have some question, just leave comment bellow.
--------------------------
Test Drive :
adf.ly/18139429...
adf.ly/18139429...
Tutorial Steering Wheel - mouse : adf.ly/1813942...
Tutorial throttle and brake pedals - mouse : adf.ly/1813942...
Tutorial Mechanical Steering : adf.ly/1813942...
![DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel](http://i.ytimg.com/vi/crdDhvhBG0M/mqdefault.jpg)
thanks a lot.I almost cried with happiness when I did it.
Hey, did u try it?....Did it work?...I'm planning on doing this as my final sem project since I wanted one for my pc but I couldn't afford it
does the forced feedback work? is it powered by the game or it just does some opposite weight?
There is no servo in the schematic in the video, so I expect no ffb
Can we use any other sensor please help🙏
How was your experience was it good or bad , I m also going to try it , is it worth the efforts
finally a tutorial that will actually show a full step by step tutorial
It has the software for arduino leonardo, xplorer and firmwares
Nice! At last, I will be able to craft my own pc steering wheel! All I need are common household and electronic items, found in any store, like an arduino, switches, wires and a *CANON IP2770 PRINTER ENCODER*
Pretty much any encoder will work
i don't have a canon ip2770 printer at hand so i'll use my Panasonic Minas A4 Industrial AC servo laying around for both the motor and encoder, pretty handy!
It has the software for arduino leonardo, xplorer and firmwares ?
Brilliant work man!! Well done!!
When i connect encoder to arduino, axis x dont work anyway :( Encoder from logitech driving force gt
Hello you founded the solution ? Because i have the same problem ... but if i use EMC utility the encoder is forking... but for me this firmware is better than emc firmware
@@norbertsvab same
@@norbertsvab do you have emc pro with emc firmware?
Can you make a seperate video on programming with voice guidance
Have you tried it ???
It is best then g29
G29 =30000rs
Our home made streeing in = 5000rs
Thank you sir love from India ❤️❤️😭😭❤️❤️
no problem bro
@@AgaYuditraStudio thanks for your reply
This is such a great tutorial. Thank you for sharing! Can You Please list new url's for all of the software, yours are not working?
How to make a steering wheel for PS
Can use this tutorial in Arduino uno without the ffb?
Yes
Hello and thanks for your educational post.
The question that comes up here firstly is with what system these devices work. It's either a computer or computer, and what the system has. Secondly, the cost of the device is less than the device ready and made by the company.
Does normal encoder work too?
Sir can we attached Logitech steering wheel with Arduino
Yes you can
@@AgaYuditraStudio how
@@beastold1320 i think connect buttons cable to Arduino
Hlo sir, I can use Arduino Uno
You can't it's to tiny
why it dont connect? At stats is "calibraton error" and encoder doesnt work? What can I do?
@NICHOLAS KUCZEK use Emc Firmware
I just need the clutch pedal and the limit switches, can I only make those and it will still work?
would you link me the encoder and timing diisk printer
@ShivKiran This Work?
Alquien me puede ayudar? Me sale calibrating error, a que se debe?
Lo arreglaste?
me pasa lo mismo y no se como solucionarlo
No, abandone el proyecto y me compre un LOGITECH G29. Es broma, aunque estuve apunto de hacerlo. Ni recuerdo como lo hice funcionar, no usen ese encodificador de impresora es fragil, aunque pude realizar pruebas de manejo en Need For Speed Most Wanted y si funciona, aunque lo hice de manera muy rustica ya que tenia que acelerar con el teclado. El proyecto es posible? Claro, pero seria bueno que hagan una lista con los materiales a utilizar e investiguen bien que programa utilizaran.
@NICHOLAS KUCZEK If you are using a printer encoder my experience may help you.
At the time, do the same, as the diagram indicates, just connect the printer encondifier and the toggle switch to the arduino, it still did not connect the pedals or the gearbox. At the beginning it did not work either, I realized that this connection diagram of the printer encoder is not always correct for all encoders (I mean where it says printer encoder, and yellow, red, blue and black lines come out of it). I recommend that you test the connections, maybe the blue line, in your encoder it is the red line and so on with all the lines. I hope I have explained myself well, in any case you can consult me.
@@josueherrera8547 hola bro, de casualidad aun conservas el codigo? parece que se cayo la pagina xD
Please I cannot download ai wave...... which website should I use
Hi, I wanna be to make a h-shifter with multiplication switcher, tell me please. Can I to connect a third contact to digital pin? If there are using only 2 contacts.
Can u tell me step by step procedure with pictures...
I m interested in making steering wheel , shifter with hand brakes and pedal
Can you send me through mail...
I need complete notes for it...plse can u make it for me and send it...
you can see on kaskus kask.us/hU9eJ for step by step pictures
Kto z polski a i kto w 2018
Ja
znasz sie na tym ?
Ktoś wie pod jaką nazwą w polsce szukać encodera?
impulsator albo enkoder
Can I use 2 arduinos in a I2C protocol?
Or can I use 2 potenciometros to recognize as button? In this case. I'd to use the same system used at G27 Wheels, depending of potentiometer value, we can set as buttons.
kkkk Br né? potencioMETROs
I can connect another potentiometer to the hand brake?
i have a problem... the wheel config isn't detecting any movement from the encoder... i'm using an encoder from hp... with another sort of sensor so i'm not sure where to connect....... the pedals go crazy in the wheel config but are detectable. the only thing working properly is the shifter.... please help...
Uhhhm...this is a new world to me. I have been learning some one two things about embedded engineering and IoT. I wanted to make a steering wheel, pedals and a gear shifter. Saw this and I feel like am just lost. I feel like I have been reading the wrong books. Can someone help me get there. What resources do you recommend.
I am doing Bsc. in Mechanical Engineering so I've dealt with tough concepts.
Good luck bro. Stay safe.
i know its has been much time since this video but i wanted to ask is there anything i can replace the encoder+timing disk printer please answer soon also really appreciate the efforts
Dude, awesome equipment! Why did you use the LEONARDO board? Strong hug.
Coz the firmware just for leonardo.
Hey man You are AMAZING ...
Thank you...
You're welcome!
Please Help! I bought A64B Photoelectric Encoder and I wired it up correctly. But wheel spinning is not detected. A red triangle thing in Wheel config software only moves little bit when I insert disk in that encoder. What is the problem? please help! I built steering wheel and H-shifter and now I can't get steering wheel working
I got it working! Looks like this encoder was defective and I was able to get it working by disassembing it and re-positioning IR led without its construction (the plastick thing). Now it works perfect!
Hey. I can't upload the the ffbwheel.0.16.Leonardo.. Upload failed.. Help
Probably you already fixed your problem, but for everyone with same problem, can just use ArduinoSketchUploader from christophediericx, that's gone work.
@@prica25 thanks . i fix it with the EMC ..
Appriciate
Hi, I'm trying to do this project actually, I have the pedals Al ready done and working, I have the encoder from an old printer and I'm about to do the steering wheel, but any of you knows with which games will this be compatible with? I have already tested it on Euro truck simulator and it worked perfectly, also tried on rFactor2 but it didn't worked so I don't know which games I will be able to play, if any of you knows I'll appreciate it a lot.
Also if you are starting I can help you with any questions you have
When I tried to upload the file from Xloader i got a notification saying upload failed. Can you please help me.
Thank you
Hi. During attempting my own build i came to a trouble. In RFR i am not getting any axis response from encoder and Arduino itself is recognized as 4 axis 32 buttons joystick. Im using HPCB781-80006 encoder and, what is imo reason, Arduino Leonardo, which i found out probably is chinease clone. Aruduino itself works, after mapping Z-toggle to buton it works fine in RFR. Any recomendations? Should i get some Arduino drivers or change encoder to like f.e. CWZ6C or just first get OG Arduino. Great work and thanks in advance
Sir encoder can't found can I use another encoder
Yes you can
Other encoder? What can you use? I can't found the encoder of the video
@@victoralejandrocanteraherr9003 you can use something like this articulo.mercadolibre.com.ar/MLA-796294091-encoder-rotativo-incremental-100ppr-ab-ttl-diam22-eje-35mm-_JM
My next school projeckt black to blow everyone away as a quiet one
Bro my wheel give spring in one direction which is right to provide ffb on left and If I turn spring low then it give ffb to right and almost no ffb or less ffb to left how to fix this?
Hi. I cannot get it to work with WRC 4,5 and 7.
Wheel is recognized as a joystick not wheel. so game has a very very big dead zone that cannot be removed. I tryed setting wheel at 180 deg put deadzone is still big
can you tell me where to find the pinter encoder and timing disk
If you cannot find printer encoder, You can use incremental encoder.
Can I make the pedals only and use the format for the Arduino to become standalone or do I need the steering wheel too because I just want only the pedals since mine doesn't have a clutch so I'm building one with one. (sorry for bad English)
Ai wave 2016 wheel config software download problem
Hey! Nice project but i have a problem. When I connect the encoder to the arduino, install the hex file into the bootloader and open the program, it doesnt show me any movement. Any help?
hey, did u solve the problem? i am having the same issue.
Hi there! I am going to be using a leonardo in a Logitech MOMO racing wheel. The wheel itself has a PCB that reads a white line on the shaft so it knows when the wheel is centered. How do I go about connecting this to the Arduino board? Do I hook it up to encoder Z pin? If not, how would the wheel calibrate itself? I'm using a motor with a built in encoder /the factory momo one/.
+iMario i dont know what momo wheel use.
You can use motor with built in encoder, but if you use ratio for your motor, you must calculate PPT with ratio.
AgaYuditra Studio Got it, thanks!
Does i really need the extra buttons??? Because i dont find a printer encoder and i need two optical encoders
Hello, i have a problem with my gearbox, it won't see my 7-th gear whatever i do, i try to re-solder everything, but still no 7-th gear( Micro-switcht is working.
Can you use an Arduino Nano instead of an Arduino Leonardo? I only need an H-Shifter and I can buy a Logitech one for a bit more than the price of a Leonardo.
Does normal encoder work too
I've gotten everything to work including FFB, but now it has stopped working consistently and keeps showing that the wheel is connected with firmware version 0.0, but it can still detect wheel movement (this is only in the software, and games don't see any wheel movement). I didn't really understand the Z toggle, that might be my problem. Is there anything i should try?
I was planning on using hall effect sensor for steering position, where should I connect the wire for that?
How to connect more buttons to analog input a3-a5? The steering wheel has 8 buttons; there are no free pin on the Arduino digital pin.
Could this be made by changing the encoder for a 10k potentiometer? It’s easier to get and less difficult to use but i don’t know if this software will allow it
hi, I have 400 ppr encoder. I am usingwheelconfig. if I turn wheel left one tour and wheel come to zero point, this zero point not a zero point. 5-10 degree slip my zeropoint. and when I turn left, wheel more force doing me than right side.
please the arduino source code not found
hi i have one question if i use a encoder of speed is like you show on te video because in my country i cant found the traduction of what you put on the video?.
another question if i use one encoder for the arduino what tipe of timing disk should i use?. thanks for you answer
Dxtweak is not there in that link. please help
I found this page, hope it can help you
www.simracingcoach.com/contenido/calibracion-pedales-logitech-dxtweak2/
The encoder which functions normally on an Arduino UNO is not working as I plug it on the Leonardo. Is there a way to connect UNO to this software instead of Leonardo? HELP!!!
in your last video, you put capasitors to your potentiometer for the pedals. why is that? and how to wire it? do you have the wiring schematics?
Capasitor use for noise filter.
3 pin potensio
(5v) (analog pin) (gnd) = wiring
(+) (gnd join with +) (gnd) = capasitor
can you sketch it out real quick in ms paint? i still cant imagine how the wiring is done haha
sorry to ask where can i buy theses parts
Why you connected encoder to digital pins? It must be on analog pins?
Good day. The problem is that the steering wheel is not calibrated: (The rest of the steering wheel works fine, there are no problems.) Frankly, there are no more ideas, but I have not tried it. PWM + Dir and 20KHz, then the motor starts to spin at a high speed in one direction, and at the same time it does not react to pressing the calibration button at all. From time to time, after you reinstall everything 100500 times, it happens that the steering wheel reacts to the request to start calibration ... but at the same time just a short time turns in one direction ... and then freezes, issuing an error about that , that calibration failed (Calibration Error).It often happens that when you press the calibration button, the Device Status turns into the search mode some sort of index (Seaching index) ... and again nothing happens.The encoder is configured correctly, namely 900 degrees in the game = 2.5 turns of the rudder (also 900 degrees). In other words -> everything is set up perfectly! And again, again, while everything else works: the encoder, pedals, buttons, etc. You can tell me something, but my ideas have already ended. Thank you in advance.
I'm having the exact same problem and im going crazy because of it. Did you find any solution to this? Thanks for any help
Can you and Buttons and ore Pedal Stifters to the steering wheel and can you reconfigure the inputs in any game as a wheel/ pedals and maybe even as buttons
Cause I am thinking about also using the pedals for fps games or so
How can I use the potentiometer as a steering wheel? I try but It doesn't spin properly.
Hello! Awesome vid, but I have a problem with downloading the software from force-dynamics. Everytime I open the link it says that the page was not found. Could you help me?
Look up the page on archive.org (maybe a little late)
hi bro, i bought rotary encoder 1000PR from aliexpress, and connected. Wheel COnfig say is " wheel ready" but no response.. what is a problem?
Hi! Works without streeting wheel? (Just Pedals,shifters,andbuttons/handbrake?)
Why extra buttons and h-shifter don't work? I connect and setup everythink like on the video
Hello mate, i want to build my steering wheel but i'm not sure which one to use arduino leonardo r3 or arduino mega 2560 ch340.Which one is better for me? Thanks a lot.
Arduino mega using chipset like arduino uno. So you cannot use it for this project.
This is very helpfull thank you very much
u're welcome
Consulta....una vez configurado se puede utilizar en PS4 o solo puedo usarlo en pc?
Bro...I did everything...buy during testing the TX RX port is not working...both tax RX led blinks and even encoder output is showing...but what will be the problem...?
Hello, I can't buy this grating. I want to use encoder instead. How can I connect?
您好，我买不到这个光栅了。我想用编码器代替，请问要怎么接线啊？
Xloader keeps failing to upload hex file. Tried everything. Giving up...
Did you use a resistor with the printer encoder
Bro does this code work if we use push button instead of potentiometer in pedals
hello can i use a E6B2 CWZ6C OMRON Rotary Encoder?? if yes where can i connect the wires??
My pedals are so sensitive. I have 10kohm potentiometers maybe i should try diffrent pots!?
DXTweak is changing something but not really much. Maybe i just dont know how to use it
+Berthold maybe your pot is broken,
AgaYuditra Studio Can’t be broken
why does the text upload fail?
how do I do just the pedals, like I do not understand how to program them
Hey guy how to use extra button I don't understand what it is used for.
Why not use potentiometers for steering as well, instead of an encoder and timing disk?
Encoder can rotate unlimited times and is more precise
where can i bought an encoder and timing disk printer ?
can i use a potentiometer instead of an encoder and a timing disk ?
Hello if i use rotary photoelectrical 600ppr encoder where can i connect it if i use this firmware ?
Hey! Anyone from 2018 can load FIRMWARE and AI WAVE 2016 wheel config to GDrive or something? Please!
What is file of code (not hex) i need it to remade please
Try to contact the developer. Link on the description
@@AgaYuditraStudio can you give me the link because i am vietnamese so i dont know anythings and i need it to remade with arduino mega
Tengo un problema. El archivo del AI Wave 2016 está caído, al entrar me marca un error 404, dice que no existe, podría alguien ayudarme? :c
Can I use mouse sensor with cd disc instead printer encoder
Hello. I have a Leonardo module and I want to use with h shifter and clutch for DFGT. So what should I firmware download need for it ? I do not need steering wheel and throttle and brake. Is this works? Thanks
I think you can use MMjoy firmware for pedals and H shifter.
Can you tell me how did you setup the pedals?
I want to make only the pedals with rubberband and potentiometer using arduino uno?
+RAGAV E if you want to use arduino uno, you can search tutorial for uno joy.
I don't have it.
What are the changes to be made to replace H shifter with magnetic shifter like in f1 steering wheels
Just place those keys behind steering wheel and assing keys in wheel config
Is there a Link for the products or is it OK when i use other potis? And is there an Version without encoder and 1 more Poti?
I write through an interpreter. the question is whether it is possible to replace the encoder with a multi-turn resistor
no. this firmware just for encoder.
Привет. Не понимаю почему не работает прошивка, ардуйно прошивается но ничего не работает , идёт только передача данных а не чтение. И можно ли по данной схеме подключить только один потенциометр?.
Excuse me! when I push "reset button", COM is no change! and when I upload firmware by xloader, It always "fail upload". How to fix it? please help me, thank you so much! I am using win 7 64 bit. Sorry my skill English is so bad!
Try press reset button twice.
I will try! thank you!
Can you add a paddle shifter to it besides H-shifter? Please reply.
Can anyone tell me why there is a toggle switch ? What is the reason !
Can you show me how to calibrate the Analog (Y and Z axil?)
Can i use a potentiometer in replacement of encoder? Cause i dont have a printer.....waiting for your response
No, you must use encoder
is there posible to use pc wheel sygnal to stering serwo motor?
Hi friend, I want to ask if the disc is just random, right?
hi where can i find 3d models what the pedal in the this video