I met your video by accident, I was interested in such a thing. I also saw similar projects. Everything was done perfectly, but I don’t understand why aluminum heat dissipator (plates) are not used anywhere on the LED strip. This is an important point, LEDs can burn out, especially since they are connected in series. Sorry if the translation is not correct. I decided to make such a device, but more strips. Alimine plates for LEDs will be added and I will mount 2 mini fans at the ends, especially since they need 5 V power, we will limit the speed with a resistor (variable) .This will give me a long life.
So now i am thinking of doing a thicker version of this with the clear acrylic discs from part 3 inside one of these. So it'll not be tiny pinpricks of LEDs of discs of LED lighting being reflected several times. I bet that would be so much cooler even. Of course not as deep and wide as acrylic discs, but still, and also with some space between them or you wouldn't get the reflection part. They could even be rather small, but the point is discs instead of the small LEDs.
Im looking for the DMS-308V2 14 Band Spectrum Analyzer Module or the schematic and board layout files to make my own board. Can you also release the arduino code from part two and three as well how to hook up the potentiometers and buttons.
How come you released code and schematic for first version but not this one? Its not available here in canada and i would like to buy it without costing me over 200 canadian dollars. Im a technologist. I can build it myself if you help me out
My analyzer (version 2) has failed :( When I turn power on all the indicators jump up and freeze in chaotic order. It is happening even before the music signal is supplied. After powering off/on it starts in the the same position. Can anyone advice where to look for the problem
I can't find the analyzer that you have, all does it work with sound, Where did you get your board at. By the way is there another way to put the holes into the film without a laser, It's to darn costly to buy one and I don't thing I could program one to make the wright cuts anyway on less you can download them online. Oh by the way what kind of glue are you using
You started with a DIY project and then switched to professional DMS 308V2 which is ready made. What are you up to man? Any one can use ready made product and achieve what you have done.What's the fun in that ?
my question is, what sound are these analyzers listening to? are they hooked up to a phone or do they have a microphone that makes them respond? Also is there a limit to how many LEDs that can go in each band, or could a guy use ans many or as little as he wants?
Are you sharing the code for version 2.0? I cant find the new version. Great work, looks awesome. I would love to build one, but I'm looking to something similar to the one in part 3.
I have bought a DMS-207 v.1 from you but I don’t know how to wire it. Could you please answer my emails and help me. I don’t know what I should use for audio signal, how to change colours, etc.
please look at the installation instructions. or you can see in this video. ruclips.net/video/xDKbpwumgF8/видео.html ruclips.net/video/DqJKDJ-LXT0/видео.html
Модуль не заказать, так как они сами не могут заказать детали из китая из за корона вируса. Я уже связывался с ним... Но хочу себе 3 версию из 14 башен))
Hello, come from Germany and the DMS-308 V2 board is not available on Ebay. Can you provide the board layout and the Arduino library? That would be super cool of you :-) I looked at the Part.1 version, but I like version 2 and 3 better from the setup :-) Thank you and best regards from Germany, By Jan
Sorry ... for this time we cannot accept and ship your order. because all shipments are closed. please come back again if the condition has improved. thank you
hello, do you also need a code for it to recognize it? Or is that automatically the same with DMS-308 V2.0? I would also like to have something with me in the room, so ask me :) If you need a code, could you give it to me? I would be very happy to hear from you. lg Chris
Saya respect ma Keahlian mas ...
Sukses terus mas...
I met your video by accident, I was interested in such a thing. I also saw similar projects. Everything was done perfectly, but I don’t understand why aluminum heat dissipator (plates) are not used anywhere on the LED strip. This is an important point, LEDs can burn out, especially since they are connected in series. Sorry if the translation is not correct.
I decided to make such a device, but more strips. Alimine plates for LEDs will be added and I will mount 2 mini fans at the ends, especially since they need 5 V power, we will limit the speed with a resistor (variable) .This will give me a long life.
VC ESTAVA INDO TÃO BEM AMIGO COM SEUS PROJETOS GRÁTIS, AI VC COLOCA A VENDA...E EU QUE ACHEI QUE SÓ AQUI EM MEU PAÍS QUE AS PESSOAS ERAM ASSIM...
Versi sebelumnya udah nyoba ikut an bikin, Mo nyoba yg versi ini ama nunggu versi 3 nya, mantap om,,,,,,,
@iPutuSan 7rts kurang dikit om, pake 175 led, 25 LED per channel, ic MSGEQ7 yg harga 105 sebiji, nano 33rb
Прекрасный!!! Гениальный!!! Индикатор Цвето-Музыки!!! Только Был-бы Он Длиной 1 Метр , Была-бы Супер Гениальность!!!
мне больше понравился другой вариант у него,на 14 каналов. Посмотрите на его канале.. Там как раз метр длинаИ выглядит презентабельнее на мой взгляд.
U R A LED MASTER 👍👏💪✌️
So now i am thinking of doing a thicker version of this with the clear acrylic discs from part 3 inside one of these. So it'll not be tiny pinpricks of LEDs of discs of LED lighting being reflected several times. I bet that would be so much cooler even.
Of course not as deep and wide as acrylic discs, but still, and also with some space between them or you wouldn't get the reflection part. They could even be rather small, but the point is discs instead of the small LEDs.
Next level, round frame with cone reflector, made it spread spectrum
Hi tryed to go to ebay link but cant fint anymore, do you still have it on sale?
Great idea ✌️👽
Akhirnya release juga.. 😁
Wow, it's very very cool 👍👍👍
awesome!!! excellent project well done!!! 👍
That's cool ,lanjut teruss gan
I'ts powerful and fantasish,congratulations.👍
Great job 👍👍👍
Uh, keren banget pak
You are the best....too more
Здравия,-было бы вообще круто,если бы внизу каждой полосы сделал бы лазерную гравировку частоты,-а так годнота,штука зачетная)))
Superb
This is fine art
Soo Beautiful
GOOD WORK!!!!!!!!!!!!
Good job sir
Mantul om
Lindo demais 😍😍
👍 и подписка,класс тема,знать бы что нужно,что б такое сделать.
Смотри Алекса Гайвера. Ардуино в помощь...
@KoSteT такто да,но нужно ещо и знать ху из ху делать.без знаний точно не сделать.😁
@@Next__Play ок,спс,буду смотреть.
На ардуино резко скачут. Тут плавней.
Perfect bravo
Woooow i love it..
Interesting work! Can you please share pcb layout for ver.2?
Super
I love this
THE BEST
Im looking for the DMS-308V2 14 Band Spectrum Analyzer Module or the schematic and board layout files to make my own board. Can you also release the arduino code from part two and three as well how to hook up the potentiometers and buttons.
buena tengo la duda de como conecto los potenciometros al arduino mega y se podría realizar con un arduino uno o la memoria no le alcanza
Buen video, ahora de igual manera las letras se verán bien? Se puede configurar en letras también?
Very nice.
Amazing!
Mantaapppp,,,Joss ...
Its awesome work...i request u to create like type for 5.1/7.1 channels. .. can u sell these things
Mantap bang... Lanjutin projectnya bang 👍🏻👍🏻🔥🔥
Oh iya bang.. itu LED stripnya seri berapa?
Ws2812 74led/meter
Keren🤗🤗🤗🤗
amazing!!!
Oi bom dia
Gostaria de fazer pedidos destes material para o Brasil?
What Laser Cutter do you have?
How come you released code and schematic for first version but not this one? Its not available here in canada and i would like to buy it without costing me over 200 canadian dollars. Im a technologist. I can build it myself if you help me out
My analyzer (version 2) has failed :( When I turn power on all the indicators jump up and freeze in chaotic order. It is happening even before the music signal is supplied. After powering off/on it starts in the the same position. Can anyone advice where to look for the problem
Dude you are nuts^^
I can't find the analyzer that you have, all does it work with sound, Where did you get your board at. By the way is there another way to put the holes into the film without a laser, It's to darn costly to buy one and I don't thing I could program one to make the wright cuts anyway on less you can download them online. Oh by the way what kind of glue are you using
amigo donde compro esas tarjetas
Hey, great work.
You are talking about a modified Code. Where can i find it?
👍👍👍👍👍😎
Can we have the arduino code for this version? The version posted for video 3 has arduino code but nothong for the dials and pushbuttons
Saya selalu tertarik dgn hasil.karya anda tp saya di buat bingung saat harus merangkainya,saya bs beli apa yg selalu anda tampilkan
hello .. check what type of laser machine you are using for your project, I see that it is adapted two nozzles
this is awesome. what is the cost?
You started with a DIY project and then switched to professional DMS 308V2 which is ready made. What are you up to man? Any one can use ready made product and achieve what you have done.What's the fun in that ?
Could please show the circuit diagram or where to purchase pcb?
my question is, what sound are these analyzers listening to? are they hooked up to a phone or do they have a microphone that makes them respond? Also is there a limit to how many LEDs that can go in each band, or could a guy use ans many or as little as he wants?
im looking for part 2 code and how to connect the Potentiometers and buttons.
If I was to buy this circuit board, is it possible to to wire together pairs of led strips to double each part of the spectrum?
Yes... you can to wire together pairs of led strips to double each part of the spectrum
What does your board do on power on? Does it go to default or does it remember the last settings?
Well, I now got mine and color change does reset to random otherwise great little board.
please, share code V2
So I'm tryna build one of these. The board I get from the seller but where do I get the LEDs? Can I just buy a wheel and cut them to correspond???
yes..please contact seller
👍👍👍👏
Are you sharing the code for version 2.0? I cant find the new version.
Great work, looks awesome. I would love to build one, but I'm looking to something similar to the one in part 3.
pasame el link de la cut laser sendme link the lase buyy
Please explain to me, what happened between 8:04 (placing red band) and 8:12 (removing it)?!
red band is paper. the glue is transparent.
@@pspep7268 there is glue?!
@@MrMahatmaPech a doble face transparent glue strip ,sorry for my english ,im spanish.
@@pspep7268 thx, that helps.
каким станком производите лазерную резку, такой же хочу? и где его можно приобрести?
или как его сделать?
ruclips.net/channel/UCWOpUrPTEYjB-Y5w11a1pWA
do you have a link for the led strip, or what's the spacing between each led? So that it matches with the holes on the acrylic
You can download in description
You can add code for mimic fireplace? I have fire place I don’t use so I want use this inside.
Whats the name of makeing body? I dont know.....😔
Say I number, I'll pay!
Where can i get v2.0 code?
Hallo brother onde eu compro este$$$ DMS 308 V 2.0
does anyone know why its called 14 band spetrum analyzer?
Нi, а где можно приобрести платы с процессором и прошивкой для такого анализатора?
Там под видео ссылка на EBAY и всё остальное
Великий Алекс Гайвер тебе подскажет как сделать все самому
ruclips.net/video/3b66UxMQoiw/видео.html
I'm interested in knowing which tools you use and recommend as the laser cutter and table saw
I'd like to make this. Is version 2.0 of the Arduino code and a DMS-308 V2 schematic available to download?
It is not time yet😀
Boa noite, compartilha o código
donde puedo comprarlo?
dms--308 v2 14 bands spectrum module where can i buy it
Can I also buy a finished product?
Boa noite como faço pra comprar um
is there a posibility to use that with digital signals? like with an other spectrum analyzer? I really love your project. it's awesome
Can not use with digital signals. This uses RCA audio input
@@PLATINUMKIT yeah I know that this method uses that. But do you know of other analyzers that use digital data?
Can you share Arduino code for version 2?
I have bought a DMS-207 v.1 from you but I don’t know how to wire it. Could you please answer my emails and help me. I don’t know what I should use for audio signal, how to change colours, etc.
please look at the installation instructions. or you can see in this video.
ruclips.net/video/xDKbpwumgF8/видео.html
ruclips.net/video/DqJKDJ-LXT0/видео.html
How much for this??
could you please send me the circuit board schematic, thaks!
if yo can get it can you please send it to me? i am trying to get it. if i can get it i will send it to you.
discord.gg/QhrTnd this is a discord page i have created about trying to get the schematic
@@theslimeking0210 I'd really like the schematic as well! Need V2 of the Arduino code too.
Как выйти на мастера и заказать блок управления этой системой!?
Модуль не заказать, так как они сами не могут заказать детали из китая из за корона вируса.
Я уже связывался с ним...
Но хочу себе 3 версию из 14 башен))
👏👏👏👏👏👍❤❤
where can i buy completed board?
Hello, come from Germany and the DMS-308 V2 board is not available on Ebay. Can you provide the board layout and the Arduino library? That would be super cool of you :-) I looked at the Part.1 version, but I like version 2 and 3 better from the setup :-) Thank you and best regards from Germany, By Jan
discord.gg/QhrTnd this is a discord page i have created about trying to get the schematic
All are EXCELLENT !!!!!
But he is not replying any of the QUESTIONS on comment section !😒😒😒😒
compartilha o código da versão 2
What is price dms circuit board
congratulations very beautiful please how much would be one of this assembled to Brazil
check in description
all links for order DMS-308 V2 os broken. where to buy?
Sorry ... for this time we cannot accept and ship your order. because all shipments are closed. please come back again if the condition has improved.
thank you
@@PLATINUMKIT if DMS-308 V2 are available please kindly inform me I am willing to purchase.. thanks ...
I wonder if these are made to order, who will buy them?
Интересно если на заказ делать такие то кто их будет покупать?
hello, do you also need a code for it to recognize it? Or is that automatically the same with DMS-308 V2.0? I would also like to have something with me in the room, so ask me :)
If you need a code, could you give it to me?
I would be very happy to hear from you.
lg Chris
It uses dms308 v.2 module. No need to be programmed because it is already programmed
www.ebay.com/itm/164057395227
while only for the USA
PLATINUM ah okey, I see that it will not be shipped to Germany :(
is there any other where it would work the same way?
@@christophertotzl8281 for other country please contact our seller at
WhatsApp +6285886373588
Or sevenliu1@gmail.com
Do you sell the code in part 2? I am interested in buying.
Buy link in the description