14 Band Spectrum Analyzer Part.3 | Acrylic Tower
HTML-код
- Опубликовано: 29 сен 2024
- Part.3
14 Band Spectrum Analyzer
Acrylic Tower
Acrylic Cutting, size, Arduino Code for Logo & More:
drive.google.c...
Tutorial 7 Band Spectrum Analyzer Version 2 :
• 7 Band Spectrum Analyz...
Tutorial 14 Band Spectrum Analyzer Version 2 :
• 14 Band Spectrum Analy...
eBay :
DMS-307 V3 7Band Music Analyzer module
www.ebay.com/i...
DMS-314 V3 14Band Music Analyzer module
www.ebay.com/i...
DMS-321 V3 21Band Music Analyzer module
www.ebay.com/i...
DMS-328 V3 28Band Music Analyzer module
www.ebay.com/i...
DMS-335 V3 35Band Music Analyzer module
www.ebay.com/i...
www.ebay.com/i...
www.ebay.com/i...
For orders in European State :
please contact the seller at
btschudin@intergga.ch
More Info please contact our seller at
sevenliu1@gmail.com
WhatsApp +6285886373588
/ legendmasters
TOKOPEDIA :
Music Analyzer module
www.tokopedia....
Complete set Acrylic Tower Music Analyzer
www.tokopedia....
Part.1 Video:
• 14 Band Spectrum Analy...
Part.2 Video:
• 14 Band Spectrum Analy...
Part.3 Video:
• 14 Band Spectrum Analy...
Music In This Video :
Track: Tobu - Obstacles
/ tobuofficial
Track: Rolipso - Jumble
Link: • Rolipso - Jumble
Track: Tobu - Infectious
/ tobuofficial
Released by NCS / nocopyrightsounds
Track: Julius Dreisig & Zeus X Crona - Invisible [NCS Release]
NCS: Music Without Limitations
Music provided by NoCopyrightSounds.
Watch: • Julius Dreisig & Zeus ...
Free Download / Stream: ncs.io/InvisibleYO
Track: Tobu - Hope
/ tobuofficial
Released by NCS / nocopyrightsounds
"THANKS ALL FOR WATCHING"
Need to package and sell as a kit
Absolutely, I'd buy one in a heart beat! Wish i had the tools to make one.
I agree. - I want a 32-Band version
@@techoverloadx If it wasn't a gazillion dollars of course.
This is so bad ass. I want a few.
Yes, I would also buy one off you..... That is amazing! Wow wow wow! 😎 👍🏻
I want one of this so bad!
Lot of hardwork here, amazing. Auto Subscribe. Thanks for share the link to learn
well done Mate, this is awesome
gracias por dejar el link de la musica en la descripcion, se te agradece!
I love it... Amazing
How to make this at home :
Step 1 : Don't be poor.
Step 2 : You figure the rest out.
Step 1 : Don't be lazy consumer*
I'm nearly there! I just need to get past step one!
Sir , i want to purchase this . How it possible? My WhatsApp number is+91 9851057311
this one is more cheaper : ruclips.net/video/J399Rzk2QJ4/видео.html
Mr knows all....don't just talk,make some and start selling them otherwise shut up.
SIMPLEMENTE HER MO SO¡¡¡ TE FELICITO¡¡¡
Супер!
Es hermoso 💜
Hello. I like your work very much. Where are you from? How can I get this product? Great
I have never seen a visualizer that reacts so well to frequencies, amazing
did you write the code for that?
Very cool, but the cleaning process is as long as making process
it needs a dome or an enclosure to prevent dust setteling in between the layers
Or you use compressed air and you're done in 2 minutes
hi Platinum,
do you ever sell these builds I'm always interested on your work. Great job and you are full of knowledge.
Very good! I like the work done. How much does it all cost?
I'll add my voice to the requests to sell this a complete kit.
Very very good
I want this under my tv hooked up to my console... OMG PLEASE!!!!
my first thought was " where can i buy it?".
great work :)
same here :D
This is amazing! Well... I will say one thing: KICKSTARTER. Sell it like Lego kit, all the parts in the box with the printed manual and video manual here, we would just need to assemble it :-). OMG I want it so much :-)
It would be cool
If he offered multiple sizes, thicknesses ("flat" for wall mounting, taller for a club or something, miniature (desktop) variants), I think this is a product that will be very popular!
Была бы возможность поставил бы 1000-чу лайков,очень красиво это шедевр,супер!!!!!!!!!
If there is ever a precut/drilled, ready to assemble kit, I'll get one.
I run cnc and laser workshop so I can roughly figure out the cost when I see products. you could buy a boss stereo system instead building one of that.
Seller contact sevenliu1@gmail.com
when you will sell it to public.. i'm interested...
Seller contact sevenliu1@gmail.com
@@081318526947 would love one of these. Do you see and if so how much
They are awesome
THIS IS A REALLY COOL PROYECT TO DO BUT WITHOUT THE CNC LASERCUT IS KIND OF HARDER BUT IS AMAZING NICE JOB
DIY be like.. First you need a Laser Cutter.
Yeah, I failed the first step.
🤣😂🤣🤣👍
yeah if you plan to clone that build, but you can always use basic tools like router and table saw to achieve the same effect.
The most beautiful and impressive project I've seen in years
Jaw-dropping VU meter project. The best project I ever saw in the first quarter of 2020. Good job!
"the first quarter of 2020" ???? You're way ahead of everyone? Whahahahaaaaaa!
Bom dia amigo
Tem como você me manda o link desse equipamento pra mim pode comprar
Not VU Meter... Spectrum Analyzer... Not the same thing at all...
Это лучший и крутейший экв что я видел! Мастер гений.
Схемку бы (
Вот история повторяется.. в 70х-80х годах это называлось цветомузыка. Все прям были помешаны на лампочках под музыку моргающих, потом даже журналы были завалены схемами, а радиомагазины - комплектами для самостоятельной сборки.. даже я собирал, и для дома на транзисторах и для дискотек на тиристорах (тепловозных :)) И вот 21 век.. увидеть "живую" моргающую лампочку настроенную на определенную частоту - ДИВО ДИВНОЕ! Это не в экране компутра, нубука или селифона видеть.. ДА. Японские кассетные магнитолы с 3-10 диодами на табло ихвалазира вызывали у многих эйфорический припадок.. Что дальше ждать? Реинкорнации эры видеомагнитофонов? Винил уже в тренде.. если чО! ;) :)))
Согласен с тем что автор "заморочился" с воплощением своей творческой идеи и у него всё получилось. Спору нет. Сама идея стара как мир. Данный видео ролик хорош для тематики "интерьерный дизайн". Моё мнение. С Новым Годом! :)
@ak7719 ЭКВалайзер!!!)))))
@@MrSonar2000 так там есть прошивка для ардуины , думаю вполне реально на основании её понять что куда подключать , а модули все видны на общем фото платы.
This one of those things that I look, think it's cool, buy it, and wonder wtf did I just spend money on.
I surprised there's nothing like this on the market. I'm definitely not doing my own DIY for this and I can appreciate the craftsmanship, but I wish there were similar products that were purchasable.
This is freakin' incredible. I want one!!!! I don't think you'd have any problem selling these for like $750-$1000 a piece... You'd probably sell quite a few at $1,500 even. AMAZING WORK. This is absolutely BEAUTIFUL!! I would definitely buy a kit of this for cheaper than the aforementioned prices if it was closer to $500 or less; no question about it!!!
I am selling it for 900€. Can be lower if more people would order them from me but right now it is just a few thats why i cannot reduce the price unfortunately.
@@BOBOY162 that makes sense! It's beautiful!!
@@imjody If you are interested in having one you can email me on mining.germany@gmx.de
How can i buy this witch web site available this@@BOBOY162
Классная цветомузыка, второй такой нет! Лайк однозначно, проделана хорошая работа!
а можете определить какой лазерный станок используется на видео для резки орг стекла
@@wernesto. спроси у автора, думаю на канале должна быть ссылка.
да
Very nice job: do you think it's possible to buy from you one piece of this cool gadget ?
If interested please reply to this message and if others are interested we can make a purchasing group 🤔🧐....
mood
I'm interested too!
Bigger than was expecting with the dimensions. TechMoan would like this.
So would beardyman...
thought the same.
Should be packaged as a kit. Would love to make one for my classroom.
Please supply me a unit, I will pay immediately - this could become a very nice business. Please let me know how you would like to proceed. I think we can manufacture and sell several thousands. I will set up an assembly plant. How can we contact and talk.
Platinum: Make this yourself
First step, laser cutter.
Me: D'OH!
From a DYI person here, it can be done with a regular drill and a jigsaw. More effort but is worth the pleasure of doing a project like this, the only thing is that acrylic is expensive.
The most beautiful spectrum analyzer display i saw.....i will built my own version too. Nice idea i learn from this.
A ton of patience and hard working, and perseverance, and creativity and technique, and... I'm tired just in commend... imagine in doing
Yes it is more expensive than the Eiffel tower.
I'm going to build this.. I've already sourced all the parts I'll need and it'll be about $300 all in.
@@wtmf80 how you doing on it is it In the process of being built or?
@@logicmp4 I'm still waiting on the module and other parts to be delivered, but everything is ordered.
@@wtmf80 sou you bought the controller from ebay? Thinking of buidling that one myself. That will probably be the most difficult part of it
@@d00mfish Yes I did buy the controller module from ebay. It's being shipped from Indonesia so not sure how long till it gets here. It left Jakarta this morning. I was thinking of building the module myself as well, but after sourcing all the parts to build it, the price on ebay is good enough to just buy it already built.
I would love to have one of these. You should definitely make this available to sell.
I'm impressed that the light from leds is not "leaking" to other segments. Overall amazing project and great execution ;)
He is exploiting the scheme that fiber optics uses to prevent light from escaping from the sides of a fiber.
Once I had the same issue when I was making a similar one. I had to cover lights using cellotapes to fix that issue. ruclips.net/video/Cx3EwPUKW00/видео.html
that is one of the sickest things i have ever seen that is a must have for my home theater. INSANE!
The creepy old guy with the trans am said the same at the Chevron.
where can i buy this
I totally agree with you on that! I'm almost drooling over this. LOL Coolest damn project I have ever freakin' seen!
Dude,just sell them already you can see how many people want one of these...including me.
In all seriousness that is about one of the coolest things I've ever seen,I'm 55 and seen quite a lot in life.. you should be very proud of yourself for creating such a work of art...and also quite seriously how much would you charge to have one built,assembled and shipped to me ??
Please beware one thing about laser cutting acrylic plastic: the cutting process is thermal & leaves built-in stress in the parts. Later, these stresses may cause the parts to crack, especially around holes. The solution is to bake the parts after cutting out, slowly heating them to just under the softening point (where the stresses relieve), then slowly cooling the parts back to room temperature.
You're overthinking it. I don't have access to a laser cutter. All I have is a table saw. If I were to make this assembly, I'd consider sending the parts out to be cut on a WaterJet. It'll leave a matte finish on the edges which can be painted to change the performance characteristics. Another option is to use a disc sander to trim the edge of the cut. Another great option is to send the job to a machine shop. A carefully planned cut sequence will leave interesting tool marks in the edges of the cut.
@@bpark10001 That was a pretty sweet pdf link! Thank you.
-- I apologize for my earlier comment. I see what the deal is here. When we cut the material, each cut leaves a tiny stress riser, even if I use a nice sharp flycutter with a wiper insert. If I take the part and bend it, then it should fracture right at one of the tool marks.
-- I do want to try my disc sander idea. A bit of soapy water is all it requires.
-- As for machine shop work, I wanna try an experiment with a small piece. Drill two holes with a 2-flute endmill. Climb cut the other side with a downcut endmill. Flycut another side. Oven cure one piece, leave the other one as-cut.
@@Dr_Xyzt OK. What happens is that the plastic melts in the cut's surfaces, the same as if it were laser cut or "flame polished". The melted plastic cools & shrinks, but is prevented from doing so by the surrounding non-heat-affected plastic. The surface is in tension, where defects are present to start cracks. The worst cuts are the ones that leave sharp "inside" corners, from which cracks grow. Modify geometry to avoid these (for example, for clock gears, put a radius in the tooth roots & on top of the teeth). Keep tool speeds LOW & keep tools SHARP. You can laser cut. The trick is to heat the whole sheet to annealing temperature BEFORE the cut. (You will need to scale up the part to account for expansion).
You can see the stress by getting polarizers (cheap pair of polarized sunglasses, remove the lenses, set crossed so is dark to transmitted light, put the acrylic between). If stress, you will see dazzling colors). After anneal, this color will disappear & will remain dark.
Welcome to another episode of if i had those tools :)
Awesome work!! appreciate your effort!
for those who reading this let's watch for another 30min 'DIY CNC Laser Cutter'
Please let me know if I can make it 12 bands and the LED length is 2M each.^^
I jsut remeber, when i see this, in the 80'th i build such toys (not so big and expensive in tech) at the analog way with transistor, condensator, resistor rows and bandpass filters ... 40 years later "its modern" ... :P
80'th? hobbyists were building them in the 60s with painted lamps and projecting on the walls.
Ребзя, все идём к AlexGyver! Там и не такое увидишь)
Там как раз такое и не увидишь, одни недоделки из ногтей
@@vlaomao он кстати на Гайвера подписан...
amazing project, I am a fanatic of music. I would love to make one of these. Do you sell the layout pattern for the cutting out of the acrylic pieces? if you do I may be interested. You do great work.
Please check in description
buen trabajo amigo crees que podrías hacerme uno igual y vendérmelo por favor amigo soy de Peru.
I need to buy this! If you start selling them or something let me know!
Haha me too
Dude, is there any way you could cut me the parts and send them to my address? I will pay you for all material etc!
Hello! I would like to buy, is it possible? How much does it cost?
Good god, that music is effing terrible.
Should have made this from EndLighten T, which is a special acrylic glass from Evonik that is meant for light scattering when edge lit. In shops it also goes by the name of Plexiglas LED.
Light scattering for plexi is also named Back Light. It consist in "damage/scratch" the surface in a non-homogeneous way to counter the light exiting the panel with the distance. In such a tiny surface (aka 60mm here) is not needed. But for bigger panel/surface, it provide a nice and homogeneous light density all over the surface.
Not worth the extra cost. Enlighten T is a ripoff.
IMO, the darkness that is on the edges gives it a 3D look and makes the columns look round.
Wouldn't change anything. A homogenous light would make it look boring, compared to the current design.
1:25 those blocks at the start of the vid is kinda cute.. [ㅇㅁㅇ]..
WHERE TO BUY ?????
xdxddxd
Pareidolia.
@하루 indonesian
One of the coolest pieces of tech I've seen.
Очень крутая штука получилась, хочу такую же
when do you share ore give privé de adruino servion 2 code.
because i,m making one on school with my teacher.
great job and I really like your projects, keep it up (;
love it. I would only change the base for a nice wood block and get rid of the "spectrum analyzer" label
Awesome but, who has that machine in a garage - so ... how much it cost If I wanted one delivered ?
@brainbah look in the see ?
@@redrooster1908 go on the video description
i think this one is more cheaper: ruclips.net/video/jjDlyvxcKek/видео.html
WoW ! Crazy work ! Love how all of this is clean made ! Good wiring, superb result. You should sell some of these !
Beautiful project. I wonder how much everything weighs in assembly? Acrylic layers the best solution from the previous project ! :)
damn man this is incredible! Who ever dislikes this, is stupid!
It's probably due to the f*ing annoying music underneath this video.
@@sapperdeflap and the awful installtion of the pcbs....like putting screw heads almost direct under big solder joints or just bending the pcb over a piece of acrylic...he got so many washers why not getting 4 plastic ones too
I was trying to expand the "show reply" link and accidentally hit the dislike icon. Luckily, I realized what I've done and unclick it. Go figure!
Que top ❤
Enjoyed even with the ads! What a craftsmanship, excellent!!
- techmoan has entered the chat -
Cho e hỏi loại đèn led này là loại full màu phải kg ạk..mua ở đâu vậy ạk..thanks a ạk
Job, well done.I'm impressed! How about selling these as a kit that persons can order and assemble on their own.
Could easily be sold for over 500$ just from the acrylic, pcb's and software.
@@StickySli oshpark.com/shared_projects/VO7699gb
oshpark.com/shared_projects/VO7699gb
#Гайверсделай а ну-ка лайкаем чтобы Саня заметил 😏😉
@KoSteT нравятся его супер подробные видео.
@@iburbon куда уж подробней то ....
@@MrZorro441 люди как видишь лайкают. Значит хотят такой проект от сани. А то он свой эквалайзер забросил🙁
Пластины из акрила, меньшего размера 4×6 обойдутся 12.000р, если делать самому, из эпоксидки то 7000р, но мля 280штук лить..
@KoSteT тут не каждый сможет повторить, так как всё разбросано, тот кто шарит найдет, или покупать его модуль на ебэй за 70 бачей, а кайвер разжуёт для каждого
Это просто шикарно! Красота какая!😲
H
Mantap bang..
Sedikit saran ,coba ditambah heatsink/plat aluminium untuk meredam panas LED...overall keren dan bangga untuk +62😎
I want buy this product
THIS is why i pay my internet bill. this might be the effing coolest thing ive ever seen
would be cool to add scrolling text like track title or whatever. maybe dancing shadow figure effect
i can't believe people actually consciously select music like this. it's absolutely terrible.
This music is for free, no copyright.
I'd buy this in a heartbeat!
Me too
Me too
u would make millions of $ if youre would sell this set done
no he wouldnt, he fergot to pit in a audio out. so you can not so easy listen to the music while analizing in on the specrtrum analizer xD
@@mutzbunny that's such an easy thing to add lol
Imagine you have 14 building and turn them like this
I would replace my fireplace with it.
Man, that is just about the Coolest Damn Thing !
I build this with my own adjustments for my wife's father. Thank you for the inspiration. Took me quite some time though.
My God, I can die after do one like this ,,, where do you sell this? Congratulations from Brazil!
Tôi thắc mắc là nó nhận dải âm tần và điều khiển nháy đúng cột led đó như thế nào ?
Amazing project!!
Are you thinking about producing this beauty for sale or just keep it as a baller project ? :) (A damn fine job tho)
I cringed when I saw the soldering job.... Nice project though, thanks for all the details.
Сколько материала переведено!
А пылюку со стекляшек как потом счищать???
Возможно и часы сделать . Чтобы не просто стояли когда музыки нет , а время показывали ;)
Platinum, you keep amazing us with amazingly beautiful and elegant projects. I WANT ONE FOR MY HOUSE!
Happy new year and please keep the nice videos coming. Subs +1
Thank..Happy new year :)
@@PLATINUMKIT how much for assembled set?
Shares the complete code with the tuning buttons and circuit board. Do you sell only the code and circuit board?
you can download arduino code in part.1 video. if you want complete spectrum module can buy at ebay.com please check in the description
@@PLATINUMKIT v2 arduino code link for me to try a build?
Do you think the lights at the top ever get jealous of the ones lower down?
😁😁😁
Do you make these for sale? Definitely interested
This would also look nice in a club. Thought you could sell some of this. How ever, really gread work
опять тоже самое! Зачем питание сверху выведено? Подключить питание всех столбцов только внизу к горизонтальной шине!
@KoSteT если вы смотрите внимательно ролик, то такого бы ответа не было! Смотрите внимательнее! Даже схема присутствует!
Hello. where can i download firmware for arduino mega 2560 pro as in dms 308 v2?
This build is so easy, I can do it in my dreams...only in my dreams.
BEAUTIFUL! I've always loved spectrum analyzers.
Arduino Code Spectrum Analyzer ?
What in gods name is that for a terrible dissonance ? You use all this time and material to build this impressive EQ display, and then you play that Mickey Mouse shit ?