4 Inch Check Valve For Home Sewers Explained
HTML-код
- Опубликовано: 16 июл 2024
- When properties are subject to city sewer surcharges (backwater), they will frequently install a 4" check valve. A four-inch backwater check valve can frequently prevent damage from when a city sewer backs up. This frequently occurs after a major rainstorm, or snow melt. This video is a test of two different types of check valves, a PVC model and a cast iron model. To learn more read www.balkanplumbing.com/4-inch....
The Balkan RUclips channel is devoted to answering your questions and informing you. We want to alleviate stressful and confusing plumbing issues you may have. We also want to make you a smarter consumer. Our ultimate goal is to enable you to make better hiring decisions when it involves plumbing - to make you a smarter consumer. If we've been successful at that, and helped you in some way, please like our video. And of course, please hit the subscribe button!
If you seek expert service or advice for any sewer, water main, or drain issue, Balkan offers free on site visits, and a guaranteed response time of four hours or less throughout Brooklyn, Queens, Manhattan, the Bronx, and Nassau County. Call us at 718-849-0900, or email TeamBalkan@balkanplumbing.com. We will cater our service to your needs 7 days a week, and after hours as well. Exceeding your expectations is our number one goal.
Balkan Sewer And Water Main Service was founded in 1952. Since its inception, the foundation of the company has been based on integrity and honesty in all of our dealings. That solid foundation has enabled us to thrive in every economic climate. The year 2022 actually marks our 70th consecutive year in business. As we have grown, we have become increasingly dependent upon a "Team First" approach. What helps ensure a continuation of our high standards, overall integrity, and high company morale, is that same "Team First" approach. Complete client satisfaction has always been the number one goal at Balkan Sewer And Water Main. That is why we are NYC's largest and most trusted sewer and water main service. Simply put, if it's plumbing, and it's underground, we do it. For over 70 years and over 80,000 New Yorkers to date, Balkan is "The Team You Trust".
Balkan Sewer And Water Main
NYC's Largest And Most Trusted Service
TeamBalkan@BalkanPlumbing.com
718-849-0900
BalkanPlumbing.com
130-01 Jamaica Avenue
Richmond Hill, NY 11418
00:00 Introduction to 2 types of sewer backwater check valves
00:30 Where a check valve should be located inside a house
01:44 Start of a live demonstration of 2 sewer check valves
02:21 Simulating a city sewer backup by filling pipes with water
03:00 Results of testing the 2 valves with water
03:25 Looking inside the check valve itself - Хобби
Cheap insurance, I had a city main clog just past my house and I was lowest in the neighborhood so all of my upstream neighbors waste was dumping into my basement with pretty significant pressure behind it .
Agreed and exactly.
Thank you for your excellent videos. I do have a question or two relating to valve design. It appears there are two main types. #1 is the flapper style, and #2 is the ball valve type. Are both types legal in NYC in a sanitary sewer line. Are there any benefits to installing one or the other? In other words, is one type more or less prone to becoming fouled, or more difficult to maintain. Obviously, I would expect installation of the ball type may require some additional care to make certain the valve was installed carefully and accurately level to function properly. Whereas the flapper type may be slightly less critical installation-wise. But, the flapper itself may provide a catch point for debris. Curious to know your thoughts. I really appreciate your videos, and have learned a great deal of information from watching. Thanks Again
Thanks for the positivity Chris. Much thanks. The check valve “flapper” is a very basic and inexpensive device. It is ideal for flash storms, as it does not hold back backwater 100%. A knife edged flood gate valve on the other hand, is a very sophisticated and highly engineered device. It holds back backwater 100% and for an extended period of time. It is likewise a much more costly installation. In both cases a site visit from an expert is required to determine if the location is a candidate for such a device, and to consider best options. Budgetary constraints can also be a factor. Hope that helps!
Thank you for the reply. I apologize for perhaps not being clear with my question. I was seeking to compare the ball check valve vs the flapper valve type; both of which are shown on the manufacturer's website. Thanks
@@chrisgardner2548 I was also wondering the same thing. Did you ever get an answer to what the differences are?
He did reply, but didn't really provide an answer to the question
I have an outdoor storm drain (7" diameter hole in the ground, with a ~3" horizontal pipe) that backs up during heavy Manhattan rains. Is this the type of issue a check valve could solve?
yes
Honestly, in almost all cases no. If you install a sewer valve on a storm line it does prevent backup (aka surcharge) from the public sewer. But then the storm water from your property has no place to go. Sewer valves are primarily for sanitary surcharges from public sewers. Hop that helps.
@@balkanplumbing thanks for the reply!
I am wondering if there is another solution you have employed in this scenario? The water that backflows seems to be entirely rainwater from the storm sewer. I can't think of another way to prevent the backflow and the band-aid solution of using a submersible utility pump to remove excess water doesn't seem ideal... Any ideas?
This would require a site visit by a professional and licensed plumber. If you’re in NYC, we provide that for free and without any obligation.
Great video. I have a follow-up question. Example: Heavy rain. Check valves check. All the rainwater on your property has nowhere to go. Suggestions? @@balkanplumbing
how reliable are these over decades? My concern is 15years after installed, getting stuck - then what...
They’re easily cleaned, the flapper replaced, checked or maintained, or swapped out entirely.
The title of this video should be "Why I recommend a Cyclone brand check valve"
So??? Great product.
@@balkanplumbing Yes, you make that more than obvious.
What happens if you install the backflow valve after the house trap, on the house side?
A potential disaster: all of the pressure of backed up waste water from the city sewer will be pressing up against the trap plugs, trying the blow them out. The sewer valve should therefore always be on the street side of the trap.
@@balkanplumbing Wow, how much pressure are you talking about? If the caps are tight and sealed, they can still blow? Why won't the cap off the backflow valve blow then?
Sewer valves are specifically designed to handle the pressure. Sewer trap plugs are not and can wear out. Act accordingly or as you said choose. Good luck!
@@balkanplumbing Unfortunately I am in a situation where the back flow valve is after the house trap in the basement. The house trap has two steel cleanout plugs screwed inside steel end caps which are clamped to the house U-trap via 4 inch flexible couplings. I ratcheted down all the clamps firmly and they are really tight on there. I hope they can handle the pressure from a back up. 🤞
I want to know the Wi-Fi alarm sewer backup
Where exactly are you located?
Hi, I need the pvc check valve ASAP. Which company I can order it online
Cyclone Valves.
Great video. Can a 4-inch PVC backwater check valve be installed to replace an existing cast-iron 4-inch backwater check valve? Would you recommend it?
Glad you liked the video. Unless the cast iron check valve is failing you, I’d say not to swap it out.
Thank you@@balkanplumbing
Needed to see how the cast iron one looks from inside and d😅don’t do it 😢
If you look through our channel we have a few cast iron check valve videos. FYI
ruclips.net/video/rgTI4inznic/видео.html
Both are flapper valves it seems. Disappointing that each valve, brand new with best possible seal condition, can leak a steady stream of sewage back into your house.
Link to the check valve?
In the video description, no?
@balkanplumbing there's a link to a page that has a more in-depth guide that relates to this video, but I'm not seeing anywhere to purchase one of these, or a link to buy.
@@CloudfeatherRusticWorks Look up Cyclone Valves. Hope that works! Mention Balkan.
Can toilet paper be flushed through this from the house side with no worries?
Absolutely, and all drain waste as well. The flap should be cleaned about once a year or so.
Would that work for keeping snakes from entering your home
Who is responsible for installing these check valves? The home owner or city?
100% the property owner. No idea why they’re not mandatory when a house is built.
@@balkanplumbing They are here in Minnesota!