Broken Mooring The Boat is on the Beach (S3 E24 Barefoot Travels)
HTML-код
- Опубликовано: 11 фев 2022
- In this weekly vlog of Barefoot Travels we head down to Sousa to help our friends with a rescue mission. The owner is a good friend of ours and asked us to film the process of re-floating his boat.
It has not been done the way we would have done it, that is for sure. However it is a challenging process to get it back in the water.
If you would like to help the owners fix their floating home: gofund.me/cbe4faa3
Please let us know what you think in the comments below!
THANK YOU for subscribing to our channel and following our journey! We've reached the milestone of 20k! Bring on 30k!
Thank you to all our PATRONS for all your support. If you would like to become a patron the link is:
/ barefoottravels
If patron isn't your thing but you still want to help us out, head over to our website and hit the DONATE button!
www.barefoottravels.life
Amazon Wish List
www.amazon.com/hz/wishlist/ls...
Find us in other places:
Patreon: / barefoottravels
Website: www.barefoottravels.life
Facebook: / barefoottravelss
Instagram: / barefoottravelss
Cheers
Erica Davy and Foxy
Music: bensound.com & youtube studio music
#sailboat #barefoottravels #brokenboat
This is why I'll always trust my ground tackle over moorings.
That scoop of the tractor destroyed the stern and the planks ruined the hull.
That was a professional wrecking job
I think that I would have laid down some greased up heavy timber beams, lifting the boat with jacks and levers to get them ender, and pulled it out regular ship launch style. Valuable lesson on relying on moorings. Good luck with it.
Okay, 11 mins in, I now see the tide doesn't reach her so scrap flotation bag idea!
Plan B, find local tug/big boat, sheets of ply to skid her on and drag her off, if it had been all sand then use thedigger to create a channel but deffo not use it to push her about like that.
A bigger digger and strops and lift her from above?
Air bags to lift it and more to go under neath it,a good powerful boat to pull it out in the water,
I'm in Australia and I could hear the fiberglass cracking from here
Right!!
Get some rollers to roll the boat down, or make a make shift super buoyant pontoon around the boat so that when hightide comes boat float off quicker and easier?
Lead the anchor out and put a strain on the rode. Place wood under keel to keep it from digging in as it slides around. Once bow is pointed toward the water, arrange wood as a series of skids and grease them as hull advances.
Good luck everyone. I personally would have turned it facing forward on the sand with lift bags also Davey.
Yeah I would have to....
my thoughts too, nose first , and push it from behind out as far as possible at low tide
@@hthring yeah, but I got thinking about the rocks and the embankment. Maybe that would have ripped off the rudder. Just a tough day....👍👍
Wow this is a tough one. Hard to say but possibly using anchors out into the water And doing the classic kedge routine. Maybe using the equipment to cut a canal. When I saw the piece of equipment with the tires pushing on her Stern area I cringed
I would accidentally have a fire on board just as I was getting my stuff out. Salvage complete..
😆 maybe not the best method
A fresh coat of anti fouling and you're away!
I am an industrial machine rigger. The big problem is the shape, and weight of the keel. Before you turned it the lead keel could have been sawed off with carbide chainsaws, and keel bolts could be cut with gas powered abrasive saws. There was no need for worry about tide. Crude out riggers could be added to the hull after the boat was righted. Then spin the bow toward the ocean. Now the boat is one third lighter. Dig a path to deeper water, and on high tide winch it free. The keel could be reinstalled at the marnia. The tides get higher in the winter.
Partial diss-assembly might be the best idea. Unload the boat as much as possible. Remove the keel. seal the holes. Remove the mast and all rigging. Repair eventual holes and cracks in the hull. Hull would roll on air bags in deeper water pulled by a power boat, a crane barge or the anchor winch. Motor or tow it to the nearest port or yacht club. Crane it out of the water. Repair the hull and reassemble keel and mast on land. Crane it back on the water. I wonder how much would this cost and if the insurance would cover the expenses.
Yes you can. Yes you can. Yes you can.
It’s done. This is how not to recover a boat if you want to use again. I would have dug under and placed a min of four bags. Not sure what the wood was for…..
Shocked they put a hard edged timber underneath when you have soft sand 🤣.
Should have started earlier and dug a deep channel then "pulled" the front end round towards the sea.Use a grab bag filled with sand to attach with ropes to the
top of the mast to keep the boat on its side when the tide comes in and keep the keel from digging into the sea bed until you're out far enough.👍👍🤯
A fourteen minute teaser, can't wait for next week😎⛵.
😆 gotta set the scene!
10:25 this hull shape looks like some famous GELCOAT PEELER is about to find a new home...
😆
I've taken quite a few off theshores of Lk Michigan. That looked like a goat and pony show.
Davey: '"Not my plan "SO DON'T @ME IN THE COMMENTS!!!!' As for what I'd do, I'd turn it bow to the ocean. Then dig a big hole seaward and then start mining under the hull with high-pressure water jets to right the boat and protect the mast. Then I'd turn the boat after the boat slid into the hole. Then I'd run the anchor out and use the windless to pull me forward as I dug my want to sea.
Yup, this!
@@PyeGuySailing looks like rocky shore hard to dig bow pointed to sea hire a tug to pull out
A windlass used as a winch will damage your bow.
if it is possible to get pcv pipes to natural gas ground instalation . try to roll it into the water.
With hindsight and without being there it is always hard to comment. My best suggestion may be totally wrong for that reason, but one lift bag under the keel to avoid it getting stuck in the ground and one lift back on the other side could have got it unstuck from the trees without breaking anything and pushed/rolled closer to the water, either by pushing the lift bags or varying the air pressure between both sides. But before doing anything I would empty the boat and get off everything that is removable to reduce weight.
WOW just WOW . That's sad ... Such an easy recovery run by fools.
Large Crain with straps just like they use in boat yards, the Crain will allow it to reach out over the shole to set it safely in the deeper water.
They probably don't have a 150 ton off-road crane on an island.
What a mess! You guys are smart to have the crash pump ready. Im going to hold my breath and hope for good news next week. A cruisers nightmare. 😢
Yes! A crash pump is necessary for this!
Thanks keep your fingers crossed!!
I would definitely push from behind. In a wide arc across the beach in a straight line towards the water. NOT sideways! But I'm sitting here on my sofa...
Air bags and rollers. I'd leave it on its side and roll it back into the water.
An excavator bucket with teeth might have been able to dig the rock, depending how soft it is. Failing that, I'm sure someone on the island must have a jackhammer attachment for their excavator. Even with minimal digging, you could create a shallow curved channel and back fill it with sand to allow pressure to be evenly distributed to the hull.
I would have pulled rather than pushed the boat. A commercial power boat could have done the job, something like a fishing boat if a tug wasn't available. Anchors tensioned with winches or come-alongs are another possibility.
As for something to reduce friction, I'd have gone looking for old carpet, sails, and plastic 50gal drums that could have the tops and bottoms cut off, slit down the side and unrolled to make plastic sheets. Still not sure if I'd have pulled bow, stern, beam or keel first into the water, each of them has pros and cons. Bow first is the most obvious, but you have the problem of protecting the rudder and prop as she falls off the ledge.
Muchas bendiciones y salud 🙏 Que todo salga bien 🙏 y un abrazo muy fuerte desde el Caribe Tropical en Puerto Rico 💯😇
1 dig channel 2 put two large anchors 200 meters in sea 3 turned boat round 4 epoxy cracks 5 next High tide, ten guys and machine push and use winches, 6 another boat tugging dynema ropes. 7 make offering to Posiden
Just woke up in St Louis Mo ,18F this morning ! Hoping to watch a video of people frolicking on the beach ☺️ but saw this and had to watch ! Then it turns out to be a Cliff Hanger !! Screw It ? Going back to sleep ! ✌️💜🎸
😆 stay tuned for next week!! Enjoy your weekend!
planks with some short pieces of pipe will roll the boat easily with the tractor pushing. one plank on the sand, one against hull and keel and pipes (rollers) in between. then push for the water, move planks as needed and rollers as well, and repeat.
Dig out rudder and keel let it sand up more wait for the tide
Glad its not your boat. Fingers crossed. I tend to get old boats in bad shape because thats what I can afford. Now that the salvage crew has made the big dent in the hull, if you offered it to me as-is where-is, for free, I would walk away and pay good money for a different boat. Having a disaster pump might save the day, wouldn't try floating her without one. Good Luck!
Thanks!
My stomach was in knots watching them turn her around. I hope it works out well in the end!
Right! We felt the same way on the beach!
Ouch...! First of all my best wishes to the owner and his boat.
This is what I would do.
(All at low tide.)
Remove as much as possible (weight) from the boat.
Get 2 or more high capacity pumps.
Blast away the sand under keel and rudder to upright the ship, and do emergency repair.
Blast channel to the water, wait for high tide and try to pull the ship into the water using continuous blasting.
If rocks are a problem, upright the ship and build a sliding cradle.
Lift the ship with slings from two sides to let the keel rest on the cradle. Then the obvious, slide it into the water at high tide.
Good luck to La Vita!!
All good ideas and all stuff I thought about as well. Especially getting the weight off. But unfortunately that didn’t happen.
I thought if we could at least hotpatch it on the beach she will have a good chance of getting to the haul out facility.
Stay tuned for more next week!!
Turn with bow facing the water as there is less possibility of damage to rudder and prop/shaft. More airbags, Use a push pull method to get into water
- push via tractor pushing from stern,
- pull from powerful powerboat/tug with lines going to sailboats bow cleats, but more importantly a loop of 1"+ rope going around a wooden plank reinforced stern of the sailboat and secured to the bow of the sailboat and this is what powerboat/tug primarily pulls on
Depending on the hardness of the beach rock, it does not appear that a water filled trench going thru beach to ocean is possible. This type of trench is typically used for boat recovery on a sand only beach.
Thanks for the comment!
I would put some float bags under it and at high tide, get a couple of power boats to try to pull it out.
Thanks for sharing the boat looks to damaged!! Hope it makes it!!
Thanks for watching!
I'm assuming that the backhoe part of that Digger doesn't work? Otherwise, with the rocks being Sandstone, I would have dug out a channel between the Boat and the deep water, 2M deep for the Keel and 1M deep for the rest of the Hull. Start at the Boat and dig out to low water line, High Tide would do the rest.
My little 110tlb will bust through sandstone pretty easy. Your idea would have worked... Cleaning up the beach afterwards would have been a pain though, and I personally, wouldn't want MY equipment going into salt water...
That was my thought too, dig a channel in the rock.
Total loss, poor guy. I hope they don't mess it up more, but not looking good for the home team
Stay tuned for next week 🤦♀️
I couldn't imagine!
It’s very sad
Complete mistake to turn the boat. It has to go in sideways in calm conditions, to maintain the maximum buoyancy. So I would have dug a hole under the keel, just big enough to roll the boat to the other side. Then bridle the bow, mast and stern to a tow rope. Call in a tug boat/boats, and gently pull the boat out at high tide. From the beach side, I would push gently and ONLY! on the bottom of the keel, using the excavator. I would NOT use liftbags or boards or anything that creates an uneven surface. Just before the operation, I would pour sand over the "rocky" patch to the water... The boat would then "only" suffer surface scratches, rather than the cracks seen in this failed attempt.
you and I think alike.
I like this one the best I think. My only question is, wouldn't the cockpit act like a big ole water scoop and it's pulled out? It looks like quite a drop off there so the hull will drop deep while the keep is still almost on dry land.
Realistically you need a mobile crane to lift it clear of the ground to minimise further damage.
My first choice would be to try using a crane and lift it up and in.
I would turn the bow to the water. Dig out the sand use lift bags
Set large anchor 100 lbs or more in ocean Set up 6 to 1 block and tackle. From anchor to a boat or vehicle on shore work with high tide
Get well soon. I hope the boat survives undamaged and returns to sea.
Craigslist ad coming soon..."great liveaboard"
Undamaged? The hull is completely wreck ed on that side. 😖
What a heart breaking situation to be in. I'm sure its the fear of all yacht owners. Horrid to watch the boat being damaged even further with the amateur re float attempt.
Pull the bow, and not push the stern, or at least use a winch and pull the stern. This was a technique called warping back in the days of wooden sail. Also dig out the keel so she has a place to drop down into to help create buoyancy.
I accidentally deleted part of my comment. Pull the bow then stern in the desired direction back and forth is warping.
Not a good situation at all and you showed us the obvious damage caused by the method of attempting to refloat it 😰🤔🇳🇿
We call this a "Cluster Fu _ k !!
Well since no crane is available I would, Connect to the top of the mast use the get as many rubber lift bags more than 3 for sure and use those as rubber rollers and recruit some Tugs and the most powerful boats I can get and pull it out by 3 points!
Yes all good ideas!
Big boats, big problems.
Loco digger driver ,,,, too many chefs spoil the broth ! Have they not heard of STRAPS .
Really great episode guys... on pins and needles to find out what happens next... where's Foxy? She could have helped with the project..
😆 foxy came with us day 1 but stayed with her auntie and uncle for the next couple days!
Walk the anchor out and winch is what I would do assist with pushing have a stack of cash for motivation
Yea. That yaght is going to float like a brick with all that hull damage. Man that is so sad.
Pull the bow around, pull always better than push
Agreed
There is a lot of damaged being created by the moving process not good
Yes! A LOT!
I'd say, do it like the channel "Another Adventure". They salvaged already a yacht in a similar situation.
Ah saw that video. Slightly different situation but this wasn’t our plan of attack either 😆
Looks like the tripled there amount of work they put more damage to the hole then the storm ever could of done
You might be right
This is good , sad for the owner yes ,
I would not lift the stern, its the heavy end , I would not lift ,
Make sure the keel is free, pull from the bow , and pivet the boat bow to the water ,
All the planks accross the rocky beach , then pull from the sea , and push gently from the stern,
Now il watch ,
Float under keel to keep boat on its side while floated to deep water
Should of watched Grand tour done like Jess’s boat 😂
Watch sailing another adventure
There's a sloop on the beach here in Maui right now, been there for weeks.
Very sad
Anchor a line way out into the water use the tractor to pull her back out to sea.
disassembly it and sell in parts :)
Wtf! Get a commercial vessel to pull. Get larger lift bags and more of them. Rig a hawser on the bow and pull it out and straight to a boatyard. Or get a crane and lift it straight into a trailer
I would have used straps to pull the boat instead of trying to push it into place
turn her bow first toward the water...get a line out in the water..air bage...prayer
No no stop pushing it with the jcb your going to crack the hull, just row some anchors out an wait a few weeks for the next spring tide,oh to late you cracked it an below the water line, you need to fix before that goes in water cause I will bet it will sink
This is definitely no fun.. Every time I've seen a boat pulled bow 1st. The 2 times I've seen people try to pull them backwards it didn't work, rope snapped and so on...
The difference between driving forwards and backwards.
Bow first for a start
I immediately said the lumber was a horrible decision...
It is a bit of a shame that the people filming didn't try to get the boat pulled out to sea before she washed ashore..
Wasn’t necessarily possible with the wind and wave conditions. I know what you mean though!
Glad it's not my boat, but had it been I wouldn't of tried to refloat it like that. Doomed to fail while coursing more damage.
Without being there it's not possible to how I would of done it. As the beach is so ferm that can be used as an advantage but limited by lock resources and money.
If it wasn't a storm that put it there. A Few anchors dropped in the Bay pulling the boat, would at the very least stop it from being wash further onto the beach. Use floats on the side to protect the boat from the beach adding bouncy
So far they have done more harm than good.
Dig a channel for the high tide , patience , do not push on the hull ! Empty the boat wait for high tide , lift bags boats junk ! Sad !!!
Very sad
That tractor was to small and they needed more bags.
I would have of removed as much sand as possible. Digging a trench for the keel. This will allow boat to be upright as possible this makes it easier to turn the bow to sea.
Then the tractor can push the yacht with the assistance of some boats to pull out to sea at high tide.
Ouch!!
Right!!
Crazy Dominican ways 😩 I wish I was there to help out ….
As you said right at the start, it's not the way I would do it.... I'm at the bit 7 mins in when you say leave comments before end.
First thing I would have done is get a kedge anchor laid well out into deeper water, then, subject to how high the water comes, presumably enough to get her bilge to lift?
I'd then get enough buoyancy bags/oil drums lashed to the keel so it lifted with the bilge and float her off well heeled in a lot less than 6 feet of water.
Does anybody know what type of boat that is ? manufacturer?
It’s a 42’ Lancer
I would have gotten the airbags to put under it the push easily hopefully
Hello everybody I read a lot of comments I don't know anything about putting a boat back in the water after it's beached. But it all comes down to can the owner or owners of the boat afford to do any of this is the question I just thought I would add that to the comments. That's too bad about their boat hope everything goes well.
Boat is going to need to go on the hard to do some repairs...
Definitely!!
Doesn't look like the yacht will survive this... Bow first of course. Kedge anchor etc. It should be text book stuff... Sad for the owner none the less...
I would build a squared platform under and slide it out.
I would have some hot patches ready because with that damage, it may sink... I guess I should watch the entire thing before commenting...
We wanted to hot patch it too maybe even from the inside …
You said they had air bags put one under the lower side of keel inflation it and put wood under keel deflate bag
Not knowing what is available off shore I see what they were trying to do turning the boat. Personally I think they should have used a water jet to dig the sand out from under the hull so they can setup the lift bag's in parallel to the hull. From there I would have tried pull the boat on the bags (as large air filled rollers) down into the water keeping the mast held down and keel up. Not elegant but once it is floating on deep enough water you let the mast go and you are away.
Hard bit is what the bottom conditions sound like as anchors are far easier to control than power boats. With time and having to do it with their equipment I would have lifted the boat and built a cradle or frame to drag the boat into orientation and then the sea or bolted a Lifting and pushing frame through the transom (repairing the transom later) but pushed her bow first into the sea (and using the anchor winch to pull her also, again with lifting bag's under her.
I have thought about but never been in this situation
Looks like a salvage job to me.
👍
😲
May be better to write it off and get another boat, depending on the cost of the repairs.
Check out our newest video
Did they empty the water tanks before attempting to move the boat?
We suggested they should. The captain said he did … but somehow I am unsure
No doubt a crane would be the obvious choice but depends on availablity I suppose.
Not easy to get one down onto the beach. But yes a crane would have been better!
Or a floating barge crane would be even better.
TBH, I would have just used dunnage bags to lift the boat up and then rolled it back on the dunnage bags. They never should have gotten started until all the equipment was in place. All that damage was done because someone was in too big of a hurry.. Sad.
Where is this beach please? Oh, I see DR...okay
Part 2