How To Maintain Weil McLain Indirect by Flushing Tank & Replacing Anode Rod
HTML-код
- Опубликовано: 28 май 2024
- @WeilMcLainCo SERVICE AND MAINTENANCE explained in this step by step instructional including replacement anode rod directions. Need the rod? amzn.to/3Ssmz00
Making The Trades Great Again & Giving Back To The Community: / channel
Need a website for your contracting business? Check out Footbridge Media for their amazing special on not only a website but SEO services for only $249/month! www.footbridgemedia.com/?ref=...
I use the HIK Micro B20 thermal camera to verify working equipment
amzn.to/3BkJC5Q and I wear Brunt pants and boots available here: bruntworkwear.com/PIPES10
Tired of HouseCall Pro? Don't wanna be ripped off with ServiceTitan? Try ServicePal for free for 30 days! app.servicepal.com/account/si...
(You can thank me later)
Please take a moment and click that 👍 button! Much appreciate the support from the community.
Check out my Uncensored channel: / mikeypipesuncensored
Oval raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) ken@armoreddecal.com
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
UPDATED: February 22, 2023
PIPE DOCTOR FLEX FIT HATS only $40 each shipped USPS! Or 2 for $70
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
Donations Accepted:
PayPal: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Zelle: office@pipedoc.net
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes
C/O Pipe Doctor Home Services, Inc.
80 E Hawthorne Ave
Valley Stream, NY 11580 - Хобби
Mike: you are a real pro. Love how you educate us as you get a job done
Love that you are putting out multiple videos a day !
Check with the homeowners where Nick was. Maybe they have surveillance video in front of house.
If I had to guess he probably called a family member or friend to come and get him.
Good job Mikey Pipes 👍
@Mikey Pipes - Pipe Doctor Plumbing & Heating & Air been good. To busy been working 6days a week for the last two years. Man it was 72 herr yesterday 30 today
I had to replace a 5 yo water heater because it was never serviced. When I drained it, it was full of white chips as shown in the video and the anode rod had dissapers.
Mike if Teflon is applyed to the anode rod it will isolate the rod and negate it job. The rod act as a negative so if you remove the connection to the tank with Teflon it doesn't work
I'll be replacing my anode rod soon. Thanks Mickey for the reminder.
Great info.Mikey. keep up the good work.
Thanks
Good one Mickey✅
I replace my Anode Rod in my Fifth Wheel water heater multiple times a year. Different types of water at all camp sites. Takes like 5-10minutes. Gonna have to carry extras around during the camping season and offer my services, and start changing out others in the sites around me
Great video my friend!
🔧 Another fine video🔧 from Mickey🔧
👍👍👍
Also went to your reviews. Make a whole video on that. People leave bad reviews but don't understand how it works
Very cool
Anode rod looked pretty good. Getting a bit thin at the cap end, but overall, not bad. Good time to replace. Nice flush job via the hose in the anode opening. 👍👍
You are the man
Lots of respect!!
Another great video and I'm also planning a trip to your area soon for a little day or two vacation maybe I'll stop and say hi
Mikey the Master Pipeman
It's a shame that very few people want to do what's necessary to get the job done today. However, his mother is probably very proud of him for walking away instead of helping to carry an old boiler. That's the way it is in 2023.
I did mine Wednesday and I put blue monster Teflon. Guess I have to redo it. Gonna pick up megaloc at homedepot this weekend and redo it
Sharp threads cut right through Teflon tape making a good electrical connection. Don't need to redo it.
@@crvinva ok thx for the info
There’s a reason you don’t Teflon low water cut offs in steam boilers.
Is this indirect a tank in tank design? Do you have any tips for descaling the ones with the heat exchanger coil, Mikey? Thanks awesome video as always.
Try the blue monster pipe dope.
It's exactly like Mega loc. Blue monster pipe dope with blue monster tape can't beat it
And give update on houdini
Fyi philanthropy website is down. Saturday 5:22pm Saturday 2/25
I can see where the tape would insulate the two pieces of metal from making a proper connection but pipe dup would still allow a connection while still sealing the threads.
is that laundry hose a special order item or can you buy it at a big box store? thanks, mike.
Pro indeed.AAAAA+++++
My Rheem hot water tank is from 2015 and we moved in in 2018. Would you recommend we start flushing and changing the rod or is it too old to start?
Do you need to turn off the boiler to avoid issues with the heating system while flushing? Or just isolate the cold water feed?
👍
Hi what do you recommend in New York ,Long Island area for service
It was great video
PIPE DOCTOR 516-295-2448
I had a oil fired lochinvar 30 gallon hwh. Lasted 22 years because I flushed it out every year.
They sure do and expensive now.
How do I find a leaking cartridge in my home? Plumber says water is coming into our tank from the out going pipe.
Lmao oh nick I still want to know what happened to frankly. I guess we may find out when he gets rehired apparently.
The meme it’s the meme 😂😂😂😂😂😂😂😂😂😂😂😂
🔧 Mickey I just might change my rod🔧
Teflon tape is an insulator and could interrupt the sacrificial electrical process.
@@PipeDoctor It's called "galvanic " reaction. The tank is protected (cathode) and the rod is sacrificial (anode.) Must be connected for reaction to occur..
@@patmurphy2472 So the threads should not be sealed? The washer is what seals it?
@@chicagolandbrokersrobertno3553 You can use some pipe dope to keep the threads removable, but yes the o ring is the sealing device.
Its like a burnt corn on the cob!!!
Hey Mikey Pipes, why is your label on the indirect peeling on the edges? Do they change company labels depending on who is available?? Plus the two other labels... 🤣 You should affix a new label for next time.
hahahaha, spoke to soon. Should have watched till the end of the video.
Shame I cannot post photos. I keep a T&P in my truck, it had a slow drip and over time stopped dripping. When I pulled it the inner guts were plugged solid. I show this valve to a lot of homeowners. The valve itself and vacuum relief required in this state are both relatively inexpensive. If a tank is drained for any reason they get changed. If am told a relief was dripping and stopped, it gets changed. If your going to pull the handle to flush it, just change it.
Dealing with Soy at the highest level, old days guys/boys had balls, not anymore. Bye Nick, missed the best opportunity you’ll ever get💰💰🤷♂️🤷♂️
@@PipeDoctor StarBucks is always hiring
Check your truck for missing tools, Nick might have taken a souvenir.
You should file a missing person report. Lol.
I had the service man from oil company came here 6 times and relief valve still is leaking
Perhaps it’s time to get a second opinion
#1 rule....NEVER TEST the pressure relief valve.
..it will drip 4ever
.unless ur replacing it
😐👍🏻🇺🇲
Capping relef vave nothin. 350 psi nothin my 7hp 180 gallon tank air compressor cuts out from factory at 195psi. It far more fun laying down the big k size oxygen tanks an knocking the valve off an watching it spin around like a turbo charged top an sudenaly picking a directoluion an taking off like a horizontal rocket blasting though a 10" hard concrete wall and keep going to the 2nd to 3rd city. Taking out anything in its path. Yes been there. 2200 psi. And many cubic feet .. the k size tank the largest shop tank avalable. I had a small tiny tank cone though box of tuck. The cab. Take the top of the engeine off. Take out the grill. And keep going. It was one of the buy out tanks used by plumbers in a cary box big dismal acetylene tank torch set. 2200psi torpedo
Question? What happened to Nick?
I'm confused on who you hired and let go, I watch your vids everyday. You let 2 inch go and just rehired him. I'm pretty sure I know Houdini(most recent) but who was the 3rd?
Hey Mikey yo why Isn’t the wife making breakfast. pipe making breakfast Big cat Matt Matt coupons go soft and warm the quiet storm
Tru that
Nick!!! Why!!!
I used to change one for a lady had bad water I would change it every year there would be nothing left of it just threaded rod. She skipped a year I changed it put it back in leaked like a sieve. Called weil McLain they said her fault she should have changed it more often.
Yeah it's well water pretty bad
Water softener will eat a rod in less than a year. Water heater manufacturer says to inspect/replace annually if using a softener 🤷♂️
Damn it I thought you were a scientist! Maybe thats why Nick left. ha
IT'S A BIRD, IT'S A PLANE, IT'S A......WEIL MCLAIN INDIRECT WATER HEATER?
Na it was a navien spy balloon
File a missing person claim to the police !🤣🤣!!! Add missing person info on all the super markets
Did he call a Uber or something?
Woodmere and Cedarhurst have some shitty water. Lots of calcium
Maybe Nick was too scared to handle a 14 inch rod so he had to skedaddle
Nick rhymes with.......sick....Lol....he gone....apb....awe poor boy
why is Kurt Russell's brother a plumber?
Them stickers your paying far to much an most likly there cheap paper an rad in the sun. I get 10,000 5x6 uv coated vinyl label like that plus 10000 business cards made for $195 usd including shipping from China. Even my small in house made parts . Colored boxes made for close to same cost.
Hard to find good help these days. Maybe he lied on his application also.
What is up with these people just leaving jobs without saying anything, much more respectful to go up to the boss tell him I'm leaving and leave hes not going to force you to work lol. Be a man and don't burn bridges.
He just said nothing and left.? That's no good.