How To Replace Convertible Fox Body Mustang Upper Well Molding (87-93)
HTML-код
- Опубликовано: 7 окт 2024
- Left Upper Well Molding: latemodelres.to...
Right Upper Well Molding: latemodelres.to...
Additional Convertible Molding: latemodelres.to...
______________________________________________________
Follow along as Jay removes and installs the upper well moldings on the 1987-1993 convertible Fox Body Mustang
______________________________________________________
RUclips: latemodelres.t...
Facebook: / latemodelresto
Instagram: / latemodelresto
#LMR #FoxBody #Mustang
______________________________________________________
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/l...
Please make more convertible videos. My 89 GT vert is in desperate need of a full restoration. Thank you guys for all the parts and videos over the years. God bless you and your families!
We've got more convertible videos coming soon Jon! Thanks for the support and for shopping with us!
Good stuff. Keep em coming. Next up should be how to adjust door window and quarter glass for proper alignment.
Coming soon Bill! Thanks for the input!
I ordered this part and have been putting it off until I was sure how to do it. This video is great. Thanks LMR!
Glad we could help Jim! We have more convertible videos coming soon!
Please reproduce the Sunvisors with the brackets for the convertibles! It is a VITAL part of the top latching down and they were always prone to breaking due to the plastic inserts. Lots of people need them and are very hard to find in quality shape and if u do they are a fortune to buy. I'm sure I'm not the only one and you guys would be the only place to have them if you reproduced them.
I'll be sure to let the product development team know! Thanks for the input! - Jude H. - Social Media Specialist
Wish this video was around last year when I did mine. Woulda saved me a whole bunch of time with an already lengthy job. One thing I’d add is don’t over tighten the attaching nuts. Too tight can cause the studs to break out of the molding. Over tight will cause the molding to distort. They need to be just tight enough to hold the molding down snug and no more.
Please share the specific rivets used on the exterior dew wipes. Great vid!
We need a convertible replacement video
What size of wrench or socket does it take to remove nuts.
Good video, you can buy the upper well moldings and the lower ones but don't have the rivets needed to attach the lower well molding to the body. Where can I get those, I really need those rivets too.
Code Blue JKU - I apologize for not having the rivets available. I'll forward this to our product team for further evaluation. I would recommend that you determine the size of the rivet by inserting a drill bit into the holes for verification. -Landan
@@latemodelrestorationOK, so no small plastic rivets for the lower well molding, but what about the small metal rivets that attach the weatherstripping to the upper well molding?
@@codebluejku Going back to my previous reply, I misread your comment. I thought you were referring to the quarter belt weatherstrip that attaches to the upper well molding. The quarter belts are riveted to the upper well molding. The lower well moldings are secured to the body of the car with small push pins. The upper well molding passes through the lower well molding and the body and is secured with the small retaining nuts that you see in the video.
If you need to reference the lower well molding video, here is the link: ruclips.net/video/ShJU451Kakk/видео.html
@@latemodelrestoration Yes I was asking about those too those I was able to reuse, but after receiving the upper well molding I noticed it didn't have the outer weatherstripping and needed to be riveted on the new one, so I was wondering what metal rivets where needed to attach the outer weatherstrip,, sorry for the confusion.
What size are the bolts that need to be removed?
It's shown in the video Reference the lower-thirds when they pop up on screen. -Landan
Hey Lmr do you guys sell moldings like these for the new edge convertible models?
Unfortunately, we don't. I would recommend sourcing some decent replacements from a donor car. -Landan
I have a 04 vert. Does anyone know how to remove it?
What is the paint for the mouldings?
Jay used some of the SEM exterior black paint for the moldings. Here's a link for all of our paint: lmr.com/products/Mustang-Exterior-Paint#3773
What's with the background noise