Sorry you feel that way... you're definitely in the minority of over 200K viewers who've watched this video and seem to do fine. FYI Those who benefit most from watching videos at Next Level Carpentry are those who "watch to learn instead of expecting to be taught" because, admittedly, I'm a Master Carpenter first and a professional instructor, well, not at all!
@@NextLevelCarpentry I meant no offense. I was just trying to expand your audience to we non-craftsmen. I was having to hit rewind just to keep up. I will be copying your bookshelf method anyway as I was very impressed with your woodworking skill. FYI, the other carpenters on RUclips always invite and welcome constructive criticism.
@@ef3371 If you meant no offense with your original "constructive criticism" comment I guess I should be thankful you didn't unleash something meant to be offensive. 🙃 FYI I do welcome constructive criticism but we apparently differ in our definition of what constructive criticism looks like and sounds like.
@@ef3371 When you are a keyboard warrior, it is difficult to guage how others might react to your "critiques" when you sit annomously in your moms basement firing comments you know have no consequences to you. This channel is excellent at explaining, and sometimes over-explaining how to do pretty complex things. It assumes you have some level of ability and don't need to be taught how to hold and read a tape measure. Have some respect and adhear to the age old principle of, if you don't have anything good to say, don't say anything at all!
@@zoladkow…nothing ‘old’ about it. When he explains his error/mistake, then the thought process needed/required to fix it, this helps the rest of us to understand more in depth, and to recognize problem points/situations.
Thank you, Matt. I especially liked your comment about making a specific jig for a specific project rather than trying to make an adjustable jig for almost any project.
Yes, a lot of people want you to make a jig for one project that's harder to build than the project itself rather than a simpler specific jig or actually sometimes no jig which works often too...
Respect for how you handled the stop block issue without restarting to hide the error, it's how we learn. Stay humble👍 I have used particle core and or MDF in routing jigs and found them to wear and mark easily from the bearing, not an issue if you are only using it to router a few dados. If you need to use it repeatedly you can harden the edges easily with CA glue. I just run a sanding block over the edges with 120 grit (a few passes) then I treat just the edge with thin CA glue and quickly run the sanding block over it a few more times. This will harden the edge like glass and makes it much more durable for repeated passes with a guide bearing. This method is especially effective with MDF. Hope you find this tip helpfully Cheers!
Your level of professionalism in your work, in your shop appearance, is truly, well, next level..! And how to fix mistakes, I was told a good chef can make good food, buta great chef can fix bad food! This is SUCH instructive content - thank you!
I love this channel. Been subscribed for a long time. His channel is all knowledge, humility and zero stupid add ons you see in the “influencer” diy channels
I'm not exactly into carpentry but every time I stumble upon one of your videos I enjoy every minute. Especially because of your clear, distinct and honest style which I appreciate very much being an essential part of good craftsmanship. The latter seems to become a bit outdated nowadays for all those "newfashioned" guys (in my humble opinion). Apart from that, being an amateur in wood, I do learn a lot for my cabinetmaking. Btw, I built a pair of your sawhorses some time ago and I'm really happy with them. Thanks for being on YT and greetings from Germany.
Hey Bob... funny you should comment about 'getting the biking miles in'... spent the day this video released on a 110 mile rails to trails ride, part of a 'good summer' here too. Hope you're pedaling too? Best, Matt
Thanks for all your patience to show us the details large and small and never assuming that we know something that experienced people find second nature
That is just Slicker than a snot on a toothpick!! One of the most enjoyable woodworking videos I've seen. The simplicity, practicality, ease, can't be beat. Gonna have to check out more of your stuff now for sure! Thank you, Thank you sir!💯
Matt, as usual a great video. I personally like to leave 1/2 inch of material on sides so shelf length is simply 1" shorter than cabnet. I use your design for push "sticks" for table saw and sanding blocks using belt sander sand paper also many of you tips daily. Thank you for sharing you vast experiences.
Using your extensive experience as a guide is totally understandable although it leads us to slightly different preferences for dado depth/shelf width, highlighting the fact some of the details are personal preference not right vs wrong. I'm honored that you choose my "professional pushsticks" and "best blocks for demanding sanding" designs for your work considering there's SO many design options 'out there' on RUclips. Sharing personal experience is a matter of paying it forward, right? Best, Matt
Matt, so why do you only cut 1/8” dados? Seems shallow on such a think board. Seems like you would want about 1/3 of the width of the board? Just my novice first impression.
@@AscDrew this is a great question! Seems to me you've got potential well beyond 'novice' if you're already thinking about this kind of thing; congratulations! What you'll learn is that better decisions are made by considering what it takes to make things strong enough with actual performance rather than what "seems like" the way to go. Re-watch this part of the video: ruclips.net/video/9iD-ScWJEpE/видео.htmlsi=28AX_hTAI3QtKmn5&t=1440 and you'll see that my choice of 1/8" dado depth is more than strong enough for these shelves to support 175 lbs. Also, deeper dados makes weaker side panels with less thickness for screws to hold everything together. I hope this makes sense to you because as you build your skillset to your own Next Level, you'll be faced with countless decisions much like this and the choices you make will directly affect your work and reputation. Best, Matt
Terrific jig. I so like your simplicity and creativity in adapting materials to suit your needs. I have much to learn from this. And I greatly appreciate your willingness to admit errors - which then can be valuable teaching moments.
Matt, another excellent video! I constantly learn all sorts of new tricks and techniques from your projects. Thanks for sharing your incredible vast knowledge with us all.
Glad to oblige! Nice to see this video so well-recieved. I expected pushback from viewers who use dominos, biscuits, router guide bushings etc so it's a relief to see your comment and others from viewers that 'get it', whether or not they ever use/apply exactly what the video shows. Best, Matt
Great job explaining the steps to build the dado jig and then demonstrating its use building the shelves. I definitely learned some new techniques from this video that I plan to incorporate in my next bookcase project. FYI... I'm one of those guys who stayed to the end of the video to see the final install. Great job! 👍
Matt, After 55 years on and off of production cabnet design and making along with custom cabnet and finish carpentry i appreciate your attention to efficiency.
Thanks John. Not everyone would agree with you on the 'just get right to it' part in Next Level Carpentry videos (many claim I talk too much) but I do strive for the "simple, no BS" part! Best, Mat
So good I watched it twice (you’re a great teacher, but I’m a slow learner). Thanks for the tip on pre-catalyzed lacquer. I’ve been using lacquer for years, but never pre-cat. What a difference pre-car makes. No noxious fumes. Sprays like a dream. Thanks again.
Thanks for watching (and re-watching) and commenting on this one! I'm replying to clarify: pre-catalyzed lacquer is all the things you say about it EXCEPT "No noxious fumes." Water borne finishes are pretty close to fume-free and proud but any solvent based lacquer I've ever sprayed, pre-cat or not, gives off enough fumes to make even a meth-head want to use it and a good quality respirator is mandatory for sensible people. Full disclosure: I've been known to spray a small project without following my own admonition and realize it's not only hypocritical but unwise, unsafe and unhealthy! Best, Matt
Thank you! I'm building - first time ever (except a vent cover following your advise!) - the cabinetry in a walk in closet. I've been "studying" (aka watching) dado jigs options and this is the absolute best! Makes total sense to me and confident now I will get the results I need.
Glad to hear NLC videos are helping you along towards your own 'next level'. BTW if you've not already seen it, I just dropped a new video yesterday showing another application of the jig featured in this video. Check it out here if you're interested in seeing a great closet shelving system I just 'invented' for a discerning client on my 'day job': ruclips.net/video/l6mr9St0fvA/видео.html Best, Matt
I have struggled with an adjustable dado jig that relies on the router base as a guide. I’ve spent a lot of time trying to set the router baseplate so that it’s perfectly centered to the bit but it’s always off by several thousandths which makes for an uneven dado line. Your method will be my go-to solution from now on. Loved the “2.0 dado stop” remark. Made me chuckle. 😊
Once upon a time I struggled with baseplate and guide bushing frustrations too... I think you'll find relying on a flush trim bit and accuracy of your guide a welcome solution to a long-time problem...
You should not be embarrassed - at all - by re-thinking the jig as you went along. It shows integrity in your work, and is a great example to "the rest of us" that we don't have to be perfect, either. At this point in my woodworking journey (somewhere between novice and semi-competent) my favorite expression is "I reserve the right to get smarter!" Thanks for the really great, simple jig idea. My only "add-on" would be to keep it around, and add another cross-piece to allow it to be used with 5/8" or 1/2" shelves as well. (Actually, you could do both - one on each side of your existing 3/4" jig.)
I'm just getting back into this stuff and have never been too great with it, but watching people like you that are willing to share your wisdom from time spent in the shop is, well, priceless! And I thank you for it! I just wish I didn't come away feeling so dumb haha! You have demonstrated fantastic ways to be efficient yet clean and strong with great joinery methods that, only in hindsight, have me saying "Dang! Why didn't I think of that!" Thanks for sharing your talent and insights!
Welcome back, Steven... glad to learn you find Next Level Carpentry content useful for your return to 'this stuff'... enjoy the journey to your own next level!
Thanks Rick... Even if that 'something to learn' is that even 'master carpenter's' don't get it right the first time (in the case of the stopped dado stop? 😂
Always glad to see your simple but effective approach to things like this. No dominos etc , but solutions that everyone can make and afford. Great video Matt, all the best.
Thanks for all the tips here. The gang cut is a stroke of brilliance! The whole idea is practical and easy to do. I will use these techniques in the future.
beautiful work start to finish, and the bearing guide bit is definitely superior to guiding against a bushing or router base. also appreciate the way you showed that error with the stop. sharing your mistakes and how you learned from it is a mark of excellent teaching
This might *) solve the problem I've had about how to make the new shelves in my workshop (after a few scrapwood tests) look good and not that a beginner woodworker made them! When I say "might" I mean, it's all on me not to ... screw it up....!! Thank you so much, Matt, for all you do to inspire and help us improve our work. As always a pleasure to watch your videos, and always to the end ... huitt! 👍👍👍
Nice to see a comment from a long-time viewer! You may remember this video from a few years ago that shows a similar process for super strong "shelves in my workshop" ruclips.net/video/UNEJSMpw_Do/видео.html Between the two videos, it's about the best I have to offer.
@@NextLevelCarpentry Thank you so much! It's not always I comment, but always watch your videos, and to the end! A few months ago YT changed my name, Pia Konstmann, to the first part of my email, and I can't change it back, and thank you for recognizing me anyway. All my best to the family as well, Pia from Denmark
@@NextLevelCarpentry Hehe. Of course! Btw: The bike is a very special "Pedersen Biclycle" (Pedersen cykel). Though hard to see on that tiny picture. These bikes were made at Freetown Christiania (in Copenhagen), from more than 100 year old drawings from Mikael Pedersen. An interesting person and inventor. Sadly, my beloved bike was stolen from me many years ago. And this is the one and only picture I have of me and my "Pedersen". My late dad took this photo one early evening when I arrived home after being at the airfield all day, and this day was a bit special, because I, for the first time, flew more than 2 hours in a glider. (2 hours and 6 minutes) I was a glider pilot for 10 years, from age 17-27. And now I'm trying to become a woodworker. And I have more respect for my tablesaw and router than I had for riding my friend's 400 CC Honda when I was 16, and later flying alone from age 18,... Not scared, but huge respect! Back then I was immortal ... :o) en.wikipedia.org/wiki/Mikael_Pedersen?fbclid=IwAR2XI-sjN7B19eTOs6vzrwtTZsqY-oOK4ji3ovQvl_-koIGnu8iV7IjJ-No
Dados can be an excellent technique to incorporate into your bookshelf projects. They provide strong and precise joinery that enhances the structural integrity of the shelves.
I've made many stop dado's with a dado stack and table saw. Never thought of using a flush trim router bit. Great idea! I would sexy that fixture up, with a bit of T track, to make it adjustable; but that is just me. You created a perfectly serviceable router template in literally nothing flat. This is a really slick way of producing clean, strong joints. Thank you so much for the tip and inspiration.
I absolutely agree, Richard. A jig like this is a perfect project for a beginner (like me) using some scrapwood, as well as a more skilled woodworker like you can see how it can be improved, with built-in t-tracks, etc. That is what Matt also is so good at; inspiring us, no matter what level we're at. Wish you all the best. /Pia from Denmark
I follow a credo that says "if it takes just a little more work to make something a LOT better, it's worth it. If, however, it takes a LOT of work to make something just a little better, it's not" The 'fit and finish' campaign you commented on is a manifestation of that credo in action IMHO. Thanks for watching and commenting on this one!
This is so simple but really effective. I am a beginner at woodworking and I want to build a trophy cabinet for my daughter this technique will make me confident to get on with what I have been putting off. Thank you.
Hi Matt I have been involved with construction most of my life. I’ve been a G/C along being a licensed plumber, but I truly liked to restore old Historical Buildings in upstate NY. When dealing with ARC Boards etc, I watch any RUclips channel that can hopefully teach me a new trick. I had a nice shop, but I am retired now but I still enjoy learning because I may put together some sort of a workshop. Thanks for passing your years of experience and knowledge to the younger generations that are getting into the trades. Not everyone needs to go to College, being a highly skilled trades person is a great way to start your business. We always need Trades people, yes I have seen many Women who are as or skilled then some guys who think they know it all. Nobody knows it all, each day we can learn , some of my best successes are the results from a mistake. Anyways Thank You for sharing your Experience and Knowledge. Every time I was training a new helper, I was also learning something that I had forgotten about, people underestimate the amount of time goes into learning a Trade especially being a G/C, you need to have a basic understanding of all the trades that will be required for that particular project ? Thanks again and Stay well 🇺🇸
Good luck on your transition Patrick! I can sort of relate when faced with plumbing projects for clients or around home. I can get it done and done well but am far from being proficient!
Very nice! Thank-you! It's a reminder that many of us (and not all) have such equipment while my friends in Africa, for example don't have enough to eat.
really found content useful. not every project i do is with the best wood, etc as often it's building things for vshop or cellar, exactly like this case. i'm also thankful to see mistakes and how you resloved it. nice job.
Worth all that Starbucks coffee money, any day! Glad I no longer drink fancy coffee and I’m a die hard NLC Patreon supporter! Thank you Matt for the great tips and tricks! If anyone wants to take their craft to the Next Level your Patreon is an awesome deal!
Superb, clearly described and demonstrated video on making a project specific through or stopped dado jig ( used in many joinery applications). Numerous tips on achieving complete accuracy during the construction of this simple jig were explained. Many thanks for providing such insight and sharing your knowledge and expertise!
After twice failing to build an accurate and adjustable dado jig, I just use these scrap piece jigs nailed and glued together. Fast and easy and always accurate. I have a similar project (bookshelf) in mind and I was thinking of fixing a stop block on the supporting wing which is then always placed on the previous groove to set the jig for the next groove.
Wow! Easy but professional. Mystery gone. LOVE the “whoopsie” and error correction. I’m sitting here trying to figure out how to build a two-shelf bookcase-type cabinet for the kitchen,and you have solved it! I’m going to steal your jig idea but make one side adjustable. Really like the stopped dado idea and how to do it. Thanks again, Matt.
This addresses the do I bring the big work to a big tool or a small tool to the big work issue, with your router jig I mean. You have a big shop and saw for big sheets but a lot of us have to break down sheets outside and that's another example of do I bring the big work to a big tool or a small tool to the big work. You even with other options found advantage in building your router jig and using it in your large shop but it's also easier to take outside to process big stock like I'm talking about. So there's that aspect, advantage to it as well. Another good video.
Tank you Matt for sharing this technique on making a simple but very effective router jig. I'm always learning something new and useful by you. Great!!
I fear too much RUclips flaming to do that video for the worldwide audience but have talked more about it for my audience on Patreon where patrons are very reasonable with their intereactions, good or bad, to a topic so fraught with potential controversy...
I really enjoyed this video - it's nice to see that a simple router can provide fast and accurate results when a) a festool domino is very expensive and b) I'm not experienced enough to have the confidence to line up dowels correctly throughout a build of this type.
I think the method you saw in this video is actually stronger and cleaner than Dominoes albeit a little bit slower to execute. Lining up dowels is always an issue too so there's another benefit of simple stopped dados, right?
Excellent! I am making this jig today to assist with a bookcase build. As.a hobbyist lacking formal training I have to spend a substantial amount of time reading and watching to pick up critical details that are second nature to others. As such, I really appreciate the attention you show in explaining things thoroughly and putting them in the larger context of a project, even the 'obvious' aspects. Two examples in this video are demonstrating the interaction of the router bit with the jig (at ~9:00 and again at 14:30) - which really is obvious but it's helpful to have full clarity - and later demonstrating the notching technique for generating the fit at the front of the shelves. I had mistakenly expected some sort of a chiseling exercise to square off the front of the dado. What you show here is much more elegant and takes this video from a 'one simple trick' type short to a full lesson. As far as I know, this is simply how it's done when one utilizes stopped dadoes, but it was new to me. Truly appreciated.
Thanks for watching and commenting... much appreciated. You are clearly someone who 'watches to learn instead of just stopping by expecting to be taught. Where stopped dados are concerned; this method is just one example among many. No one way is 'simply how it's done' with each individual deciding on the method they prefer... I just happen to prefer this method to the extent that I think it's worth devoting time and energy in video production to share it with the world. Assuming you're interested in continuing to elevate your work and abilities to your own 'next level', here's a new video from the Channel the longest deep dive I've ever produced. ruclips.net/video/2Nbe8ateORY/видео.html There's a ton of tips and tricks in the video that can be applied to all sorts of projects besides tool totes. The price of admission is 3 1/2 HOURS of your time though... 😎
Yours is a great explanation for making single application jigs. When making custom and unique pieces it is quicker to make jigs particular to the task at hand. It doesn't eliminate the benefit of having some adjustable/multi-use jigs, they compliment by having a selection of choices to conquer the job.
Excellent video. I agree with you about using project-specific routing jigs. I always use such jigs because they are quick, easy, and cheap. Besides, I don't have room to store more jigs because my table saw sleds take up too much room. Many thanks. 👍👍
LOL!! Too many tablesaw sleds spoil the shop, right? Plus also: I'll never live long enough to do a 2nd job that would justify saving yet another 1-off jig...
Once again, a video that's educational and instructional. Additionally, you have solved a problem for me in a future project. Thanks for the education on techniques.
Terrific technique video, I bookmarked it and will use it next opportunity, coming soon. Would love to see you do a spray finish video. Sure there are many, many such vids on RUclips but your fans would like to see your special start-to-finish take on projects.
Matt... you always seem to keep my Intetest till the Very End of the End of the End as you did with this Video. You make it look so Easy! Cudos! Couple of CYA Tips: 1.) Round-Over the Very Top of the the Big Notch to prevent Sharp 90 from Piercing into Wire Insulation over time. 2.) Fabricate Covers to Protect High Voltage Wires from being Pierced by Who-Knows-What being Tossed into the Shelves.
Thanks for noting a couple very reasonable precautions for projects like this E-Bob... you're an observant and insightful guy who's viewpoint is, no doubt, based on real world experience where you probably see somewhat unlikely problems on a regular basis. I fully expect 'my favorite electrician' on this job to point out those exact cautions when he sees the shelves installed for the first time. Makes me appreciate subs who've 'got my back'!
@@Electric-Bob NO WAY!!! Man, when's the last time I heard from Cheewurz... or Electric Bob, for that matter?! Your comments take me WAY back to the early days of NLC... so glad to know you're still out there adding meaningful comments to content on RUclips! BTW my 'favorite electrician' has done a ton of work un-doing hack work done by slipshod Sparkies in main panel in the same mechanical room. He's yet to see this shelf installed and I'll be surprised if he doesn't echo your recommendations when he does see it late next week. Hope all's well with my 'ol buddy Cheewurz!
So far you are right.😅 5’ cabinet with 3 shelves 20” deep with both sides matching. Whew! Your jig with a bearing trim bit worked really nice, much better than using a guide against the router body.
Thank you for sharing this and also admitting that things don't always go to plan not even for the pros. As a weekend woodworker, I have many instances of 'delayed intelligence' , which can be very discouraging at times. So much wood gets wasted, but without mistakes there can be no learning.
I like the quote. "how you do anything is how you do everything" as well. I'm making a bookshelf out of solid wood (no screws to hold the shelves) and it struck me that your system will work well for centering dowels properly (ie...drilling pilots from the inside to the outside, having a properly centered pilot from which to drill the dowel holes. perhaps obvious but I might not have thought of it w/o your video...thanks
Good to see another video. Seems like there's been a big gap in new content. I haven't been getting notifications lately. I used one of your tips on an actual project my company performed. Attaching free standing rail posts using threaded rod! Worked like a charm!
Thanks! FWIW I got bogged down by an ambitious build video project last spring that distracts me to the point it's hard to produce other content in the meantime. Once I get that build project video for my Master Carpenter's Tool Tote produced and uploaded I hope it clears the content production logjam that's been building for about 9 months. Glad used and liked the box newel post video... it's super sweet for sure!
Thanks for showing the complete project including what didn't work, and the final installation. I picked up new stuff like cutting notches for the shelves for snug fit and better looks. One small feedback though. Sometimes nonstop talk comes in the way of paying attention to what you are doing. May be you can dial it down a bit.
Truly next level carpentry. Your instructive style and humility are awesome. I haven’t seen anyone else mention it but I think you may need to cover the back of the those shelves with drywall for fire safety.
Thanks for the grace... much appreciated! Full disclosure: I edit out a TON of 'humanity' but don't expect viewers to put up with 200 "uuuhhhmmm"s and minutes of dead air that I edit out during post production. Stuff like that little dado length stop? That's more 'reality' than 'humanity' IMHO and hope other viewers like you benefit and appreciate from it, embarrassment and all!
Poor instructor. Speaks too fast, glosses over explanation of what he is doing.
Sorry you feel that way... you're definitely in the minority of over 200K viewers who've watched this video and seem to do fine. FYI Those who benefit most from watching videos at Next Level Carpentry are those who "watch to learn instead of expecting to be taught" because, admittedly, I'm a Master Carpenter first and a professional instructor, well, not at all!
@@NextLevelCarpentry I meant no offense. I was just trying to expand your audience to we non-craftsmen. I was having to hit rewind just to keep up. I will be copying your bookshelf method anyway as I was very impressed with your woodworking skill. FYI, the other carpenters on RUclips always invite and welcome constructive criticism.
@@ef3371 If you meant no offense with your original "constructive criticism" comment I guess I should be thankful you didn't unleash something meant to be offensive. 🙃 FYI I do welcome constructive criticism but we apparently differ in our definition of what constructive criticism looks like and sounds like.
What? you must be retarded to not understand him with this level of explanation. Give me a break
@@ef3371 When you are a keyboard warrior, it is difficult to guage how others might react to your "critiques" when you sit annomously in your moms basement firing comments you know have no consequences to you. This channel is excellent at explaining, and sometimes over-explaining how to do pretty complex things. It assumes you have some level of ability and don't need to be taught how to hold and read a tape measure. Have some respect and adhear to the age old principle of, if you don't have anything good to say, don't say anything at all!
Terrific! Best of all is a man that is willing to show his errors and how to correct it. Thank you.
your sentiment is spot on It takes humility and a growth mindset to acknowledge errors and provide insights into the learning process.
Yeah... but since everyone are doing this nowdays it's becoming old 🙃
Wish we could’ve seen the 1/8” round over up close instead of from the tripod
I mean when you were routing it. You finally showed it at end of video
@@zoladkow…nothing ‘old’ about it. When he explains his error/mistake, then the thought process needed/required to fix it, this helps the rest of us to understand more in depth, and to recognize problem points/situations.
Showing how to fix a mistake is really as valuable, for some of us, as the rest of your instruction is for all of us.
Great job! Absolutely great job.
Thank you, Matt. I especially liked your comment about making a specific jig for a specific project rather than trying to make an adjustable jig for almost any project.
Yes, a lot of people want you to make a jig for one project that's harder to build than the project itself rather than a simpler specific jig or actually sometimes no jig which works often too...
Agreed. Making jigs is a skill in itself, one I still need a lot of practice with lol.
That is a very clever way to cut those slots out. You make a very good teacher btw.
“Nothing to it”😂
Sir, you are my favorite woodworking/carpentry show on RUclips.
Please keep ‘em coming.
Respect for how you handled the stop block issue without restarting to hide the error, it's how we learn. Stay humble👍
I have used particle core and or MDF in routing jigs and found them to wear and mark easily from the bearing, not an issue if you are only using it to router a few dados. If you need to use it repeatedly you can harden the edges easily with CA glue. I just run a sanding block over the edges with 120 grit (a few passes) then I treat just the edge with thin CA glue and quickly run the sanding block over it a few more times. This will harden the edge like glass and makes it much more durable for repeated passes with a guide bearing. This method is especially effective with MDF.
Hope you find this tip helpfully Cheers!
Your level of professionalism in your work, in your shop appearance, is truly, well, next level..! And how to fix mistakes, I was told a good chef can make good food, buta great chef can fix bad food! This is SUCH instructive content - thank you!
I love this channel. Been subscribed for a long time. His channel is all knowledge, humility and zero stupid add ons you see in the “influencer” diy channels
One of the best end of the ends. Great dado technique as well.
Kind of shatters any illusion of some idyllic world where RUclips personalities work on only the best jobsites in amazing places, right?! 🤣
I'm not exactly into carpentry but every time I stumble upon one of your videos I enjoy every minute. Especially because of your clear, distinct and honest style which I appreciate very much being an essential part of good craftsmanship. The latter seems to become a bit outdated nowadays for all those "newfashioned" guys (in my humble opinion). Apart from that, being an amateur in wood, I do learn a lot for my cabinetmaking. Btw, I built a pair of your sawhorses some time ago and I'm really happy with them. Thanks for being on YT and greetings from Germany.
You're sure welcome!
Kudos on building your own pair of Next Level sawhorses... it's fun knowing where they live 'out in the wild'!
Yet another winner! Hope you are still getting the biking miles in. It’s been a good summer here.
Hey Bob... funny you should comment about 'getting the biking miles in'... spent the day this video released on a 110 mile rails to trails ride, part of a 'good summer' here too. Hope you're pedaling too?
Best,
Matt
Thanks for all your patience to show us the details large and small and never assuming that we know something that experienced people find second nature
Hey....Spencer from the Insider Carpentry channel just gave you a shout out in his most recent video about applying edge banding.
Seriously? How cool is THAT!? I noticed an uptick in views on that video... and now I know why!
That is just Slicker than a snot on a toothpick!! One of the most enjoyable woodworking videos I've seen. The simplicity, practicality, ease, can't be beat. Gonna have to check out more of your stuff now for sure! Thank you, Thank you sir!💯
Matt, as usual a great video. I personally like to leave 1/2 inch of material on sides so shelf length is simply 1" shorter than cabnet.
I use your design for push "sticks" for table saw and sanding blocks using belt sander sand paper also many of you tips daily.
Thank you for sharing you vast experiences.
Using your extensive experience as a guide is totally understandable although it leads us to slightly different preferences for dado depth/shelf width, highlighting the fact some of the details are personal preference not right vs wrong.
I'm honored that you choose my "professional pushsticks" and "best blocks for demanding sanding" designs for your work considering there's SO many design options 'out there' on RUclips. Sharing personal experience is a matter of paying it forward, right?
Best,
Matt
Matt, so why do you only cut 1/8” dados? Seems shallow on such a think board. Seems like you would want about 1/3 of the width of the board? Just my novice first impression.
@@AscDrew this is a great question! Seems to me you've got potential well beyond 'novice' if you're already thinking about this kind of thing; congratulations! What you'll learn is that better decisions are made by considering what it takes to make things strong enough with actual performance rather than what "seems like" the way to go. Re-watch this part of the video: ruclips.net/video/9iD-ScWJEpE/видео.htmlsi=28AX_hTAI3QtKmn5&t=1440 and you'll see that my choice of 1/8" dado depth is more than strong enough for these shelves to support 175 lbs. Also, deeper dados makes weaker side panels with less thickness for screws to hold everything together. I hope this makes sense to you because as you build your skillset to your own Next Level, you'll be faced with countless decisions much like this and the choices you make will directly affect your work and reputation.
Best,
Matt
No negativity here. It looks great. I agree that not every project requires making complicated jigs. That was quick easy and a great tip. Thanks.
This is craftsmanship at its best. great job Matt.
It's always inspiring to see individuals like Matt who will create something that reflects their passion. Great job indeed!
Another thorough, concise and informative video. Love your mantra, "how you do anything is how you do everything".
I got that saying from a viewer/subscriber a few years back and use it often ever since...
Terrific jig. I so like your simplicity and creativity in adapting materials to suit your needs. I have much to learn from this. And I greatly appreciate your willingness to admit errors - which then can be valuable teaching moments.
Matt, another excellent video! I constantly learn all sorts of new tricks and techniques from your projects. Thanks for sharing your incredible vast knowledge with us all.
Glad to oblige! Nice to see this video so well-recieved. I expected pushback from viewers who use dominos, biscuits, router guide bushings etc so it's a relief to see your comment and others from viewers that 'get it', whether or not they ever use/apply exactly what the video shows.
Best,
Matt
Great job explaining the steps to build the dado jig and then demonstrating its use building the shelves.
I definitely learned some new techniques from this video that I plan to incorporate in my next bookcase project.
FYI... I'm one of those guys who stayed to the end of the video to see the final install. Great job! 👍
Thanks for watching and commenting on this one, Pete... much appreciated... and welcome to the The End X3 Club!
What a great demonstration of the technique, even on a tricky little utility shelf. Thanks.
Thanx for showing me / us a simple but effective way of assembling a shelf, simplicity is the key
Achieving such a seamless and snug fit takes careful planning and meticulous execution and it looks fantastic!
Your jigs are nicer that my builds 🤪 Great job Matt, precision as always.
Matt,
After 55 years on and off of production cabnet design and making along with custom cabnet and finish carpentry i appreciate your attention to efficiency.
I love this simple, no BS, style of video. Just get right to it, and do it!
Thanks John. Not everyone would agree with you on the 'just get right to it' part in Next Level Carpentry videos (many claim I talk too much) but I do strive for the "simple, no BS" part!
Best,
Mat
So good I watched it twice (you’re a great teacher, but I’m a slow learner). Thanks for the tip on pre-catalyzed lacquer. I’ve been using lacquer for years, but never pre-cat. What a difference pre-car makes. No noxious fumes. Sprays like a dream. Thanks again.
Thanks for watching (and re-watching) and commenting on this one! I'm replying to clarify: pre-catalyzed lacquer is all the things you say about it EXCEPT "No noxious fumes." Water borne finishes are pretty close to fume-free and proud but any solvent based lacquer I've ever sprayed, pre-cat or not, gives off enough fumes to make even a meth-head want to use it and a good quality respirator is mandatory for sensible people. Full disclosure: I've been known to spray a small project without following my own admonition and realize it's not only hypocritical but unwise, unsafe and unhealthy!
Best,
Matt
Thank you! I'm building - first time ever (except a vent cover following your advise!) - the cabinetry in a walk in closet. I've been "studying" (aka watching) dado jigs options and this is the absolute best! Makes total sense to me and confident now I will get the results I need.
Glad to hear NLC videos are helping you along towards your own 'next level'. BTW if you've not already seen it, I just dropped a new video yesterday showing another application of the jig featured in this video. Check it out here if you're interested in seeing a great closet shelving system I just 'invented' for a discerning client on my 'day job':
ruclips.net/video/l6mr9St0fvA/видео.html
Best,
Matt
You are a true professional, sir! You put everything simple and easy to understand.
I have struggled with an adjustable dado jig that relies on the router base as a guide. I’ve spent a lot of time trying to set the router baseplate so that it’s perfectly centered to the bit but it’s always off by several thousandths which makes for an uneven dado line. Your method will be my go-to solution from now on. Loved the “2.0 dado stop” remark. Made me chuckle. 😊
Once upon a time I struggled with baseplate and guide bushing frustrations too... I think you'll find relying on a flush trim bit and accuracy of your guide a welcome solution to a long-time problem...
Thank you for keeping the mistake in the video. It shows how we should adjust or issues while we’re working. Great job!
You bet! Unfortunately there's plenty more where that one came from 😉🤯🤣
You should not be embarrassed - at all - by re-thinking the jig as you went along. It shows integrity in your work, and is a great example to "the rest of us" that we don't have to be perfect, either. At this point in my woodworking journey (somewhere between novice and semi-competent) my favorite expression is "I reserve the right to get smarter!" Thanks for the really great, simple jig idea. My only "add-on" would be to keep it around, and add another cross-piece to allow it to be used with 5/8" or 1/2" shelves as well. (Actually, you could do both - one on each side of your existing 3/4" jig.)
I'm just getting back into this stuff and have never been too great with it, but watching people like you that are willing to share your wisdom from time spent in the shop is, well, priceless! And I thank you for it! I just wish I didn't come away feeling so dumb haha! You have demonstrated fantastic ways to be efficient yet clean and strong with great joinery methods that, only in hindsight, have me saying "Dang! Why didn't I think of that!" Thanks for sharing your talent and insights!
Welcome back, Steven... glad to learn you find Next Level Carpentry content useful for your return to 'this stuff'... enjoy the journey to your own next level!
awesome as per the usual....always something to learn even with a simple project such as this.
Thanks Rick... Even if that 'something to learn' is that even 'master carpenter's' don't get it right the first time (in the case of the stopped dado stop? 😂
Always glad to see your simple but effective approach to things like this. No dominos etc , but solutions that everyone can make and afford. Great video Matt, all the best.
Thank you, sir!
Just want to say I appreciate the length of your videos. The details are important.
Thanks Nick. Do me a favor and spread the word to your social media contacts? 😎
Thanks for all the tips here. The gang cut is a stroke of brilliance! The whole idea is practical and easy to do. I will use these techniques in the future.
Oh, and I'm getting myself one of those erasers
I wish I could say I never need/use my jumbo "OOPS" eraser but I'd be lyin' if I did... I think you'll like one if/when you get one!
Exactly what I what I need for my pantry project. As always I appreciate the detail and accuracy to assure a great fit finish!
should work great for any pantry shelves that don't need to be adjustable...
beautiful work start to finish, and the bearing guide bit is definitely superior to guiding against a bushing or router base. also appreciate the way you showed that error with the stop. sharing your mistakes and how you learned from it is a mark of excellent teaching
So much easier than a straight edge with an offset. Thanks!
I know, right?! Hope you use/adapt this for doing better work faster and more accurately!
This might *) solve the problem I've had about how to make the new shelves in my workshop (after a few scrapwood tests) look good and not that a beginner woodworker made them!
When I say "might" I mean, it's all on me not to ... screw it up....!!
Thank you so much, Matt, for all you do to inspire and help us improve our work.
As always a pleasure to watch your videos, and always to the end ... huitt! 👍👍👍
Nice to see a comment from a long-time viewer!
You may remember this video from a few years ago that shows a similar process for super strong "shelves in my workshop" ruclips.net/video/UNEJSMpw_Do/видео.html
Between the two videos, it's about the best I have to offer.
@@NextLevelCarpentry Thank you so much! It's not always I comment, but always watch your videos, and to the end!
A few months ago YT changed my name, Pia Konstmann, to the first part of my email, and I can't change it back, and thank you for recognizing me anyway.
All my best to the family as well,
Pia from Denmark
@@pirakoXX at least they didn't change your 'girl with a bicycle' Channel icon!
@@NextLevelCarpentry Hehe. Of course!
Btw: The bike is a very special "Pedersen Biclycle" (Pedersen cykel).
Though hard to see on that tiny picture.
These bikes were made at Freetown Christiania (in Copenhagen), from more than 100 year old drawings from Mikael Pedersen.
An interesting person and inventor.
Sadly, my beloved bike was stolen from me many years ago. And this is the one and only picture I have of me and my "Pedersen".
My late dad took this photo one early evening when I arrived home after being at the airfield all day, and this day was a bit special, because I, for the first time, flew more than 2 hours in a glider. (2 hours and 6 minutes)
I was a glider pilot for 10 years, from age 17-27.
And now I'm trying to become a woodworker. And I have more respect for my tablesaw and router than I had for riding my friend's 400 CC Honda when I was 16, and later flying alone from age 18,...
Not scared, but huge respect!
Back then I was immortal ... :o)
en.wikipedia.org/wiki/Mikael_Pedersen?fbclid=IwAR2XI-sjN7B19eTOs6vzrwtTZsqY-oOK4ji3ovQvl_-koIGnu8iV7IjJ-No
Great tutorial. Ive always wanted to try using dados in my bookshelves. This makes it very simple to understand and implement.
Dados can be an excellent technique to incorporate into your bookshelf projects. They provide strong and precise joinery that enhances the structural integrity of the shelves.
I loved seeing you stand on it to show the strength
Crazy strong, right? 💪😎
@@NextLevelCarpentry yes! Way stronger than I would have imagined!
I've made many stop dado's with a dado stack and table saw. Never thought of using a flush trim router bit. Great idea! I would sexy that fixture up, with a bit of T track, to make it adjustable; but that is just me. You created a perfectly serviceable router template in literally nothing flat. This is a really slick way of producing clean, strong joints. Thank you so much for the tip and inspiration.
I absolutely agree, Richard. A jig like this is a perfect project for a beginner (like me) using some scrapwood, as well as a more skilled woodworker like you can see how it can be improved, with built-in t-tracks, etc.
That is what Matt also is so good at; inspiring us, no matter what level we're at.
Wish you all the best. /Pia from Denmark
"The fit and finish campaign" that is outstanding!!
I follow a credo that says "if it takes just a little more work to make something a LOT better, it's worth it. If, however, it takes a LOT of work to make something just a little better, it's not" The 'fit and finish' campaign you commented on is a manifestation of that credo in action IMHO. Thanks for watching and commenting on this one!
Hi Matt, what a beautiful job. You explain it very well. It is a joy to watch from Ireland.
It's always fun to see comments from a far-flung international audience off next level carpentry videos... Much appreciated! 😎
This is so simple but really effective. I am a beginner at woodworking and I want to build a trophy cabinet for my daughter this technique will make me confident to get on with what I have been putting off. Thank you.
You're welcome. I encourage you to browse NLC for other videos that cover topics that should apply directly to your trophy cabinet build!
Your videos are always clear and well thought out. Thank you for sharing this tip and method of joinery.
Hi Matt I have been involved with construction most of my life. I’ve been a G/C along being a licensed plumber, but I truly liked to restore old Historical Buildings in upstate NY.
When dealing with ARC Boards etc, I watch any RUclips channel that can hopefully teach me a new trick.
I had a nice shop, but I am retired now but I still enjoy learning because I may put together some sort of a workshop.
Thanks for passing your years of experience and knowledge to the younger generations that are getting into the trades. Not everyone needs to go to College, being a highly skilled trades person is a great way to start your business.
We always need Trades people, yes I have seen many Women who are as or skilled then some guys who think they know it all. Nobody knows it all, each day we can learn , some of my best successes are the results from a mistake. Anyways Thank You for sharing your Experience and Knowledge. Every time I was training a new helper, I was also learning something that I had forgotten about, people underestimate the amount of time goes into learning a Trade especially being a G/C, you need to have a basic understanding of all the trades that will be required for that particular project ?
Thanks again and Stay well 🇺🇸
Thank You! Thank You! Thank You!. I'm a Plumber trying to be a Carpenter. You make it very easy to understand. Thanks
Good luck on your transition Patrick! I can sort of relate when faced with plumbing projects for clients or around home. I can get it done and done well but am far from being proficient!
Nice, simple way to get a clean alignment and strong shelf. I dig it!
Awesome. Great to see a real craftsman at work. Thank for sharing. "Howdy" from deep south Texas.
You're welcome... weather in 'deep south Texas' is sounding great right about now!
THANK YOU I'm on my first "real" shelving project and this will let me add a nice detail.
Great job, and thanks for the how to on the jig, and your procedure are straight forward and easy to follow.👍🏻
Very nice! Thank-you!
It's a reminder that many of us (and not all) have such equipment while my friends in Africa, for example don't have enough to eat.
really found content useful. not every project i do is with the best wood, etc as often it's building things for vshop or cellar, exactly like this case. i'm also thankful to see mistakes and how you resloved it. nice job.
Such a pleasure to watch and learn from your video.
Many thanks from Edinburgh.
Worth all that Starbucks coffee money, any day! Glad I no longer drink fancy coffee and I’m a die hard NLC Patreon supporter! Thank you Matt for the great tips and tricks! If anyone wants to take their craft to the Next Level your Patreon is an awesome deal!
Thanks for a nice comment and the 'plug' for benefits/value of being a patron of Next Level Carpentry on RUclips!
Superb, clearly described and demonstrated video on making a project specific through or stopped dado jig ( used in many joinery applications). Numerous tips on achieving complete accuracy during the construction of this simple jig were explained. Many thanks for providing such insight and sharing your knowledge and expertise!
Thanks for such a great 'review' of this video Jeff... much appreciated!
Just wish I had watched this video last winter before making a set of bookcases for my daughter. Great jig and instructional video 👍
Great video. Loved seeing how you responded to an issue, seeing the problem, and arriving at a solution that actually improved the design.
Thanks... all part and parcel of a project like this, right!
You are a true craftsman and professional and i always learn something from your videos. Thank you for sharing your knowledge and skills!
After twice failing to build an accurate and adjustable dado jig, I just use these scrap piece jigs nailed and glued together. Fast and easy and always accurate.
I have a similar project (bookshelf) in mind and I was thinking of fixing a stop block on the supporting wing which is then always placed on the previous groove to set the jig for the next groove.
I can't wait to dig through your videos for how to on precatilized finishing!
Wow! Easy but professional. Mystery gone. LOVE the “whoopsie” and error correction. I’m sitting here trying to figure out how to build a two-shelf bookcase-type cabinet for the kitchen,and you have solved it! I’m going to steal your jig idea but make one side adjustable. Really like the stopped dado idea and how to do it. Thanks again, Matt.
This addresses the do I bring the big work to a big tool or a small tool to the big work issue, with your router jig I mean.
You have a big shop and saw for big sheets but a lot of us have to break down sheets outside and that's another example of do I bring the big work to a big tool or a small tool to the big work.
You even with other options found advantage in building your router jig
and using it in your large shop but it's also easier to take outside to process big stock like I'm talking about.
So there's that aspect, advantage to it as well.
Another good video.
Completely loved it, always learn from you. Not at your skill level, or even close but not afraid to keep moving forward.
Matt, you really are the jig king!!
Tank you Matt for sharing this technique on making a simple but very effective router jig. I'm always learning something new and useful by you. Great!!
It's great when something so simple works so well, right?!
Great stuff! The CA glue is a good way to initially hold the pieces in place while you get them fastened.
I use the CA positioning hack all the time for that exact reason!
Another excellent video with this master craftsman showing us valuable woodworking techniques ..Thanks for this video !
Great explanation. I would have thought the 1/8" dept dado would be too weak. You have prove me wrong. It look greats.
Would like a video on your spray techniques,finish and equipment
I fear too much RUclips flaming to do that video for the worldwide audience but have talked more about it for my audience on Patreon where patrons are very reasonable with their intereactions, good or bad, to a topic so fraught with potential controversy...
I really enjoyed this video - it's nice to see that a simple router can provide fast and accurate results when a) a festool domino is very expensive and b) I'm not experienced enough to have the confidence to line up dowels correctly throughout a build of this type.
I think the method you saw in this video is actually stronger and cleaner than Dominoes albeit a little bit slower to execute. Lining up dowels is always an issue too so there's another benefit of simple stopped dados, right?
Excellent! I am making this jig today to assist with a bookcase build. As.a hobbyist lacking formal training I have to spend a substantial amount of time reading and watching to pick up critical details that are second nature to others. As such, I really appreciate the attention you show in explaining things thoroughly and putting them in the larger context of a project, even the 'obvious' aspects. Two examples in this video are demonstrating the interaction of the router bit with the jig (at ~9:00 and again at 14:30) - which really is obvious but it's helpful to have full clarity - and later demonstrating the notching technique for generating the fit at the front of the shelves. I had mistakenly expected some sort of a chiseling exercise to square off the front of the dado. What you show here is much more elegant and takes this video from a 'one simple trick' type short to a full lesson. As far as I know, this is simply how it's done when one utilizes stopped dadoes, but it was new to me. Truly appreciated.
Thanks for watching and commenting... much appreciated. You are clearly someone who 'watches to learn instead of just stopping by expecting to be taught.
Where stopped dados are concerned; this method is just one example among many. No one way is 'simply how it's done' with each individual deciding on the method they prefer... I just happen to prefer this method to the extent that I think it's worth devoting time and energy in video production to share it with the world.
Assuming you're interested in continuing to elevate your work and abilities to your own 'next level', here's a new video from the Channel the longest deep dive I've ever produced. ruclips.net/video/2Nbe8ateORY/видео.html
There's a ton of tips and tricks in the video that can be applied to all sorts of projects besides tool totes. The price of admission is 3 1/2 HOURS of your time though... 😎
@@NextLevelCarpentry Ha! Well that will be time well spent. I will absolutely tune in. Thanks so much!
Thanks so much for this! Just what I was looking for. The lacquer was a great tip also. The best!
Yours is a great explanation for making single application jigs. When making custom and unique pieces it is quicker to make jigs particular to the task at hand.
It doesn't eliminate the benefit of having some adjustable/multi-use jigs, they compliment by having a selection of choices to conquer the job.
Good job Matt, stop dados are in my near future. And of course, I was going to do it the hard way! Thanks a bunch! and I did watch to the end
Excellent video.
I agree with you about using project-specific routing jigs. I always use such jigs because they are quick, easy, and cheap. Besides, I don't have room to store more jigs because my table saw sleds take up too much room.
Many thanks. 👍👍
LOL!! Too many tablesaw sleds spoil the shop, right? Plus also: I'll never live long enough to do a 2nd job that would justify saving yet another 1-off jig...
I had no idea I watched videos till the end of the end. Good stuff!
Once again, a video that's educational and instructional. Additionally, you have solved a problem for me in a future project. Thanks for the education on techniques.
Terrific technique video, I bookmarked it and will use it next opportunity, coming soon.
Would love to see you do a spray finish video. Sure there are many, many such vids on RUclips but your fans would like to see your special start-to-finish take on projects.
I like it. It provides clean professional look. Thanks.
Matt... you always seem to keep my Intetest till the Very End of the End of the End as you did with this Video. You make it look so Easy! Cudos!
Couple of CYA Tips:
1.) Round-Over the Very Top of the the Big Notch to prevent Sharp 90 from Piercing into Wire Insulation over time.
2.) Fabricate Covers to Protect High Voltage Wires from being Pierced by Who-Knows-What being Tossed into the Shelves.
Thanks for noting a couple very reasonable precautions for projects like this E-Bob... you're an observant and insightful guy who's viewpoint is, no doubt, based on real world experience where you probably see somewhat unlikely problems on a regular basis. I fully expect 'my favorite electrician' on this job to point out those exact cautions when he sees the shelves installed for the first time. Makes me appreciate subs who've 'got my back'!
@@NextLevelCarpentry
Matt... you are always so Humble and Sweet with your Replies. I Love Ya Matt! ❤️
@@NextLevelCarpentry BTW Matt... Cheewurz and Electric Bob are one & the same 😉
@@Electric-Bob NO WAY!!! Man, when's the last time I heard from Cheewurz... or Electric Bob, for that matter?! Your comments take me WAY back to the early days of NLC... so glad to know you're still out there adding meaningful comments to content on RUclips! BTW my 'favorite electrician' has done a ton of work un-doing hack work done by slipshod Sparkies in main panel in the same mechanical room. He's yet to see this shelf installed and I'll be surprised if he doesn't echo your recommendations when he does see it late next week.
Hope all's well with my 'ol buddy Cheewurz!
That’s a fantastic jig and method. Can’t wait to build it. Thanks or the inspiration.
Nice video Matt. Just in time for a cabinet I’m making with dado joints. Made your jig last night and will try it out today. Thanks!
I predict your project will be successful and satisfactory!
So far you are right.😅 5’ cabinet with 3 shelves 20” deep with both sides matching. Whew! Your jig with a bearing trim bit worked really nice, much better than using a guide against the router body.
That is cool. Need to make a shelf for for our pantry. Gonna use your tricks!
Thank you for sharing this and also admitting that things don't always go to plan not even for the pros. As a weekend woodworker, I have many instances of 'delayed intelligence' , which can be very discouraging at times. So much wood gets wasted, but without mistakes there can be no learning.
Great Video - I'm an old dog - learning a new trick! Love the END!!!
Fantastic video!!! I wish I had a fraction of your knowledge. I'll just keep watching your videos and see if I can catch up.
I like the quote. "how you do anything is how you do everything" as well. I'm making a bookshelf out of solid wood (no screws to hold the shelves) and it struck me that your system will work well for centering dowels properly (ie...drilling pilots from the inside to the outside, having a properly centered pilot from which to drill the dowel holes. perhaps obvious but I might not have thought of it w/o your video...thanks
I love that you showed your mistake. 👍
Too funny! It's a real part of woodworking and I don't want to give the impression that I'm immune to it. 😎
Good to see another video. Seems like there's been a big gap in new content. I haven't been getting notifications lately. I used one of your tips on an actual project my company performed. Attaching free standing rail posts using threaded rod! Worked like a charm!
Thanks! FWIW I got bogged down by an ambitious build video project last spring that distracts me to the point it's hard to produce other content in the meantime. Once I get that build project video for my Master Carpenter's Tool Tote produced and uploaded I hope it clears the content production logjam that's been building for about 9 months. Glad used and liked the box newel post video... it's super sweet for sure!
Thanks for showing the complete project including what didn't work, and the final installation. I picked up new stuff like cutting notches for the shelves for snug fit and better looks. One small feedback though. Sometimes nonstop talk comes in the way of paying attention to what you are doing. May be you can dial it down a bit.
Truly next level carpentry. Your instructive style and humility are awesome. I haven’t seen anyone else mention it but I think you may need to cover the back of the those shelves with drywall for fire safety.
Lots of great instruction! Thank you!
Very comprehensive, thanks for the effort.
Much respect for leaving your mistake in. Too many people on YT edit out their humanity.
Thanks for the grace... much appreciated! Full disclosure: I edit out a TON of 'humanity' but don't expect viewers to put up with 200 "uuuhhhmmm"s and minutes of dead air that I edit out during post production. Stuff like that little dado length stop? That's more 'reality' than 'humanity' IMHO and hope other viewers like you benefit and appreciate from it, embarrassment and all!