Audi A6 C7 Black screen quick fix
HTML-код
- Опубликовано: 25 авг 2024
- Hello again , this is a short video for those of you who own an audi a6 c7 who has problems with the navigation display , info display.. everything works fine , sound..buttons beside the display..pinch black. As i always say, do it at your own risk..if you have minimal knowledge about cars and electrical stuff..you can do it.
Try not to skip the video, contains annotations.
Consider subscribing to my channel and if you like the video, give a thumbs up ! Thanks !
Contact: servicelaptopelectronic@gmail.com
Dude. You are a lifesaver. My wife’s Audi had the same issue.. I’d been putting it off for about 3 months now. After I watched your vid about 5 times, I took the plunge. Worked BEAUTIFULLY.. thank you
Good idea to check the 5amp fuse before pulling it apart.
thanks for the video, this fixed my screen. I had two breaks in the brown wire and one in the pink and blue, fuse was blown as well
Thanks, it's worked. Now need to fix the problem.
Thanks for the video, saved me a bunch of time chasing other thoughts of the problem
Thx I have to check it tomorrow as it also stopped working😊
Thank you
Very helpful video, took me a while to find the broken wire. The wire had become very brittle and had completely snapped I'm guessing this is quite a common problem with the wires aging and constantly moving with screen.
Thank you for this video. Great job.
I followed this video a few years back, It worked perfectly. This week it happened again with another part of the wire. I tried this video again and it worked again, except, this time when I turned my car back on the ac didn’t work. The ac center vent got plugged back in like normal and now my ac is blowing really hot. Did anyone else experience this?
thanks you helped me solve the problem
Welcome back. Missed your content
Thank you for watching !
thank you worked for me
Спасибо !) твое видео помогло !))
Yoo my A6 mmi wont come out and i don’t find problem. Radio aint working and cannot find on internet what is problem
What size socket do you need
8 mil
Good job
How can i make setup that display does not fold in?I want that display always stay out.I have vcds but i need instructions to code it.
Instead of taking everything apart, you should have checked and replaced the fuse first😅
You din’t watch the video, because of the shorted ground and positive wires the fuse was blown. After you fix the wires you change also the fuse.
Fiz tudo isso mas o meu nao aperece nada
Thanks to you, I have learned what not to do 😅
My issue is that screen works as it comes out, horizontal position, and then once it start pivoting (going vertical) screen goes black!?
Is this the same problem?
Yes
Can u show where fuse brother
Fuse A2 , 5amp , passenger side it’s in the video 4:26
@@amperugarage tnx lot bro I done my car coz of ur vidio
What’s that tool called
What tool ?
I miss your old videos with music 😢
I miss them too..i don’t have time anymore to create audio.. maybe in the future
@@amperugarage I hope too.
good luck !