Everything to know about Epson F570 sublimation printer including more tutorials here 👉 www.silhouetteschoolblog.com/p/epson-f570-sublimation-printer.html Silhouette Studio Software Download and Feature Comparisons 👉 www.silhouetteschoolblog.com/2017/07/silhouette-studio-upgrade-features-list.html
I cant seem to find the format for my pri ter option. I have removed and reinstalled both silhouette and the printer. When I go to file, page set up the option is not there. Any idea what I could be doing wrong
A bit late to the party but thanks for this. I had been struggling with all the idiosyncrasies of EPSON Edge on a Windows dual boot on a mac. I noted in this video that you skipped Paper Handling but in selecting that option and checking the "Scale to fit paper size" box it then allowed me to select the 24 x 30 (Retain to Scale) option. Having done this, when I selected Printer Settings the correct paper sizes were pre-filled with size, roll etc so all I needed to change was the "MAX QUALITY" as you suggested
So quick question. I just bought the epson printer (yay!! And yet nervous at the same time 😂 😬) do the sublimation files once loaded into the silhouette software come set to the correct size for the tumblers or mugs?
Usually - but it depends on what and where you purchase. It will say if it's sized or not..but keep in mind not all tumblers are exactly the same dimensions.
Hi @stephanepardo5801, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
There are quite a few reasons it could be, I'd check out the minimum system requirements to see if there's anything that stands out: www.silhouetteamerica.com/faq/solution/software-minimum-system-requirements
I know this video is a couple of years old but I've just started using Silhouett Design and trying to print on my F570. When I follow your directions and click on "print" from the file at top of the page it opens up in a silhouette preview page and doesn't bring up any printers to choose, etc. Help! LOL. I hope someone sees this.
It likely means your Silhouette software is set to preview the print job within the program instead of directly sending it to your printer; check your software settings to ensure the correct printer is selected and that the "Print to Printer" option is enabled.
Melissa thank you so much for your help. Thanks to you I was able to size and print my design like I wanted. ❤ I look forward to learning more through your videos!!
Everything to know about Epson F570 sublimation printer including more tutorials here 👉 www.silhouetteschoolblog.com/p/epson-f570-sublimation-printer.html
Silhouette Studio Software Download and Feature Comparisons 👉 www.silhouetteschoolblog.com/2017/07/silhouette-studio-upgrade-features-list.html
I love your channel!!! You are so helpful!
I cant seem to find the format for my pri ter option. I have removed and reinstalled both silhouette and the printer. When I go to file, page set up the option is not there. Any idea what I could be doing wrong
A bit late to the party but thanks for this. I had been struggling with all the idiosyncrasies of EPSON Edge on a Windows dual boot on a mac. I noted in this video that you skipped Paper Handling but in selecting that option and checking the "Scale to fit paper size" box it then allowed me to select the 24 x 30 (Retain to Scale) option. Having done this, when I selected Printer Settings the correct paper sizes were pre-filled with size, roll etc so all I needed to change was the "MAX QUALITY" as you suggested
Thank you!
THANK YOU SO MUCH FOR THIS
Sure thing
Thank you so muchMelissa for all the info… I think I might cancel my Cricut membership and try Silhouette for Aa little while! Love your tutorials
when I go to print page set up I do not have the options you have. Could i get some help please :)
It's likely you don't have the drivers installed. Try to re-install them and you should get the options
Would you recommend using a windows pc vs. a Mac?
I have both but much prefer my Mac
So quick question. I just bought the epson printer (yay!! And yet nervous at the same time 😂 😬) do the sublimation files once loaded into the silhouette software come set to the correct size for the tumblers or mugs?
Usually - but it depends on what and where you purchase. It will say if it's sized or not..but keep in mind not all tumblers are exactly the same dimensions.
I’m not getting the option where I get to choose the color matching
Hi @stephanepardo5801, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
I had a custom built mac that is super powerful but silhouette studio runs VERY slow. any idea why?
There are quite a few reasons it could be, I'd check out the minimum system requirements to see if there's anything that stands out: www.silhouetteamerica.com/faq/solution/software-minimum-system-requirements
How do we get the printer to cut automatically where the design ends?
Hey there! This is in the print options!
I know this video is a couple of years old but I've just started using Silhouett Design and trying to print on my F570. When I follow your directions and click on "print" from the file at top of the page it opens up in a silhouette preview page and doesn't bring up any printers to choose, etc. Help! LOL. I hope someone sees this.
It likely means your Silhouette software is set to preview the print job within the program instead of directly sending it to your printer; check your software settings to ensure the correct printer is selected and that the "Print to Printer" option is enabled.
@ thank you!
Check the silhouette software correct?
Melissa thank you so much for your help. Thanks to you I was able to size and print my design like I wanted. ❤ I look forward to learning more through your videos!!
Is it windows compatible
Yes
What's the difference of using a Mac computer and using an iPad Pro
Hey there, using a computer is always going to give you more options. Mobile softwares are going to be more limited.
Ummm okay thanks for deleting my comment. I could have really used the help.
We do not delete comments. What can we help you with?