DJI Mavic Air is now Quiet! Master Airscrew Stealth Props Review and Test
HTML-код
- Опубликовано: 21 авг 2024
- ✔️ Master Airscrew Stealth Props: (Amazon) geni.us/LfOW79
✔️ DJI Mavic Air: (Amazon) geni.us/Knyl
👇Expand the description for MORE information and links👇
===================================================
#DJI #mavicair #tech4all
In this review we will closely inspect the new Stealth props by Master Airscrew, specially designed for DJI Mavic Air.
The main benefits of these props:
- 100% compatible
- reducing the noise by 3.5db
- increasing the flight time by 12%
Whether these values are correct or not - you will see in the video. For any comments or ideas - reach out to me using the comments section below the video.
===================================================
➡️ Product links & Information ◕‿◕ :
✔️ Master Airscrew Stealth Props: (Amazon) geni.us/LfOW79
✔️ Stealth Props in EU: (Amazon) geni.us/BEliyHJ
✔️ DJI Mavic Air: (Amazon) geni.us/Knyl
================================
🎵 Music used in this video:
Ikson - Late
theepicmixer - Time travel 101
================================
٩(-̮̮̃•̃) ۶
================================
🕹 Tech gear that I use:
📸 Camera: Panasonic G7: (Amazon) geni.us/qyacxdz
📱 My current smartphone: bit.ly/2UYCaWG
🚁 The 4K drone I use - DJI Mavic Air: shrsl.com/spvz
🎤 Lavalier Microphone - : bit.ly/2CP5sRs
⌚ Amazfit SmartWatch: bit.ly/2ABu9za
📷 A cool action camera: bit.ly/2HMeNgg
🚴 My Electric Scooter: bit.ly/2JMHPhj
================================
Thank YOU for visiting the Tech4All channel!
Please support the channel by using the affiliate links provided above. This implies no additional cost to your purchase and supports me with a minor percentage out of it and greatly helps me to produce better and more videos.
► 🍺💲 Buy me a coffee: www.buymeacoff...
► 📺 Please subscribe to the channel using this link: bit.ly/tech4allnow
► / tech4alln0w
Sharing this video over social media means A LOT to me! Thank you in advance for doing so.
(─‿‿─)
✉ for business inquiries and review requests, please send an email to contact@tech4all.net Наука
I have them on my Air. They are less noisy, but the thing is still noisy and draws attention. Very durable, I hit a small branch and had no prop damage. I recommend them.
Great to know about their durability! Thanks George.
Do you still use master aircrew props? Have you had and problems after a year? I know that this is an older comment, so you may not have your mavic air anymore, but im just wondering because I'm thinking of getting them for my mavic air, and I have heard of some cases of master aircrew props shattering in mid air, and in turn destroying the drone. Thanks
Still on the originals I do not fly a ton, but have had no issues
@@firemannss thanks so much for getting back to me
@@firemannss one more question, Have the master airscrew props for the mavic air ever scratched the drones body? Someone said that it happened to them, although I don't see how this makes sense, because the props creat lift, so they should flex upward, away from the drones body. Thanks
I think the frequency of the noise is an important noise. It's super obvious to the public when they hear the really high pitch of the stock props.
Decibels are logarythimic measures, so in purely physical terms (sound pressure) even a few decibel can be described on paper as an impressive -50%. But in reality, noise levels are expressed in decibels for a reason. Our brain interpret sound intensity is a logarithmical way, to an extent. For a sound to feel half as loud as 66 decibels to an average human, that sound will need to be 33 decibels. In physical, linear terms, 66db corresponds to a sound pressure 45 times (!) what you get at 33db :D
So, yes, 3db less that 60 is a very small thing to our ears, and it becomes even less significant at a distance. If some people perceive that as a more significant difference, this is probably due to the difference frequencies produced by the two types of propellers. This can of course be very relevant, but it is not because of a significan reduction in noise level.
Coming to battery life, many reported a significant drift in medium to high wind with this kind of alternative propellers. That 13% or so of extra bettery life in static hovering with no wind could well be eaten up entirely, or more, when flying the drone in windy conditions, which admittedly is a very common situation for scenic shots.
So, people who fly in that conditions will get potentially less flying time compared to using the standard propellers.
So, it would seem that it is a case of usage type.
Shots in calm air which benefit from a marginal reduction is sound levels, or a perceptible difference in noise quality, will benefit from using the alternative propellers.
But people doing scenic shots with more than a breeze might be better off saving themselves 20 bucks, while possibly getting a longer flying time. Also, situations in which wind could rise suddendly in complicated situations, such as shots over waterbodies. Propellers which drift in high winds are not advisable in that situations.
Aldo - this comment is AWESOME! Thank you.
@@TechMishka Guys, please please please do your homework. A 3 dB shift represents a 100% difference in sound energy. That's what logarithmic means, therefore 90dB + 90dB = 93 dB, so 3 dB is a huge difference (100% in relative loudness in fact). A difference of more than 10 dB is not noticeable to the human ear, meaning if you have a source that is 100 dB, you cannot hear another source that is 90 dB or lower. Also, critically, sound pressure reduces in open outside (free field) conditions by about 5 dB with every doubling of distance; so 90 dB at 3 ft = 85 dB at 6 ft and 80 dB at 12 ft and so on. Therefore distance from source the microphone is critical. Nice vid though.
totally agree aldo keep up the good info
Aldo - this is not correct. For a sound to be perceived as half as loud, it needs to be between 6 and 10db lower, depending on the frequency of the sound. So 56db is half as loud as 66db. 1 dB was selected as 1dB because it is the least amount of change that can be perceived at all. 3dB is significant, but not a big deal. Still, seems like I will buy these due to quieter and longer flight.
Ive use these sense they've come out. Definitely quieter, haven't had not 1 error message. As long as you change the (GAIN ) settings ..... no problems.
Awesome! Same here, although I am still on less than 4 hours of flying with them.
What gain settings do you need to change?
Go here in the settings ..... change them to 80
.. ucarecdn.com/e3468d2d-18d7-4c03-8aa0-26d4c5b5d9da/-/format/auto/-/preview/3000x3000/-/quality/lighter/
@@brianpark2564 Here is the tutorial - www.masterairscrew.com/pages/mavic-air-gain-settings
My Air just caught a branch while coming in for landing and split the end of the 1 prop, didnt crash thankfully but i now find myself in the market for something i know nothing about, this video definitely came in handy
So glad it did! These props are quite nice
Clearly your noise levels are not going to be the same cause your positioning isn’t the same?
The device that was doing the measuring - which is a tablet in the backpack - was at the same spot - and this is what matters. So the comparison is legit.
I do believe you but it’s the angles you shot from that are different hence my opinion. Still a good video mind you.👌🏿👌🏿
@@TechMishka Um, no. Both the receiving and the outputting objects should be in relatively similar positions when testing. If the Drone is 3 feet away from the Db reader on the first test, and 4 feet away on the second test, the second set of results are obviously going to have quieter results.
This vid really is quite convincing... unless, like me, you have purchased the props and tried it yourself. Yes, the sound is a bit less disturbing, as the frequency is noticably lower. But unfortunately the drone does not fly as smoothly as it does with the OEM props. Actually, it is shaking like hell, even if you adjust the gains. The gimbal of course tries to iron this out, but it just does not look right. I certainly would not recommend to purchase this props, although the noise of the Mavic Air really is quite a problem. In-flight stability for me is more important.
Thanks Mr Chainanimal - sorry to hear about your stability issues. Never had such with my unit. And lately I've been mostly flying with the v2 of these props, which were also excellent.
Just tested.....yeahhhhh....finally LOW NOISE! ;)
Sounds like the props are higher pitch or something similar to move more air at a lower RPM so it's not so much that's it quieter overall but that the RPM had dropped for a given hover and so the annoying buzz.
However this will reduce reaction time as the spin up will be slower which explains their faults with drift etc.
This can be confirmed with a RPM check in the hover, the MA props will be slower.
It'll also kill flight time if you like to chuck it about a bit.
The motor faults are likely an amp overdraw as they will suck more trying to spin that higher loading prop up.
Good analysis, thank you cornishcactus
Literally came here to make this comment! Noise is only one factor. Coming from 3D piloting heli's - sure idle up uses more power - but the stability and ability go up. I figure the "magic" here is a more aggressive prop that pushes more air at lower RPM so the motors don't need to spin up as fast to achieve hover. A good test would be to put it at 100+ ft and fly around with stock vs 3rd party and I assume you would see less stable flight and less flight time. But - to each their own! Fly safe o7
Really like my Master Airscrew Props! It does seem a little more drifty in high wind perhaps because the props are spinning slower at 80% on the gain settings. Would love to hear more folks assessment on this.
Devearl Leo - great to hear your feedback! I also like the props a lot and in my opinion they make quite a nice difference.
I get yaw drift when applying throttle too hard on real estate shoots. But in the air it’s so much quieter it’s worth dealing with a little drift.
What we need is a Drone that does not draw attention when taking off.
A couple of dB is not the answer.
It should have pretty large props then. All the Mavics draw attention, unfortunately.
@@TechMishka Not the Mavic Pro 2 .... that beast is quiet
3dB means the power of a value is twice lower whatever is about
Agreed, but anything is better. And although it's only a few db's the actual pitch is dramatic if you ask me
@@darknstormyimages must be nice. I'm not a baller... yet!
Another good video. It was full of information, didn't bog down with too much talking, and it was organized. Sorry about the shipping time.
Thanks Paul! Great to see you liked it.
Yeah - shipping times are the outcome of many variables - so - I am sort of used to it :-)
Excellent video. You earned my sub.
So great, thank you!!
Today the Stealth Props were delivered, first I did a db-Meter-Test with the original propellers, result: 90 db (2 m distance, indoor), then with the "Master Airscrew Stealth Props". Result 90 (!) db (same distance, same place). Only the pitch was a bit lower. Very disappointing!
Definitely quieter. I'm happy so far.
Good to hear! And looking forward to see the new Mavic Air 😊
I have the MA stealths for my mav pro and they are very impressive compared to both the stock and low noise oem props. they have a bit more of an aggressive twist and slightly heavier than both oem models but are very nice to use and they are my fav 3rd party props. i never bothered with hover times as there are too many real world variables to really notice any diff
Good to know that these props are good for other models too.
Useful presentation. Thanks!
Most welcome George! 👍😛
Yes very Nice props
They sound like an improvement though the sound of the current propellers does not really bother me. I live in a suburban area of Atlanta and there is plenty of space in the public parks. I will probably try them because the price is reasonable.
After I got them I started to fly more and dare to do that on places I haven't done it before. Hopefully the same will happen to you too 🙂
If this really works, that would be great. My Mavic Air is very rarely flown, just because of the horrible noise it makes. Other than that, it is still a lousy drone compare to my Mavic Pro, but it has some things going for it, expecially the size. If the props were available in the country I live, I would certainly give it a try...
Mine did not lift my Mavic Air off the ground and yes, they were installed correctly. I see how the drone is definitely quieter now that it won’t fly.
James Propst Did you turn the Mavic Air 360* and on edge 360* as well. Perhaps it needed that. Also, what did your visual console say. If you only had the controller you can’t troubleshoot effectively. Just a thought, good luck.
Well dumbass me… I know enough about aerodynamics that I should’ve looked at this before ever bitching about it. Master Airscrew contacted me and asked me to photograph the QR codes on the back of the boxes of the two sets of propellers that I got. Sure enough, one of the sets was all the same propeller, not two sets of opposite-rotating propellers. I had apparently gotten a box of properly marked, but improperly pitched propellers due to a manufacturing error. I installed the other set that was correct, set the gain to the recommended 80% in all fields, and sure enough these are a definite improvement in terms of flight times and a lower-pitched sound. The flight time advantage is well worth the price, even though they are advertised as quieter. The company definitely stepped up, owned the problem, and took care of this now happy customer. It’s nice to see a real American company in action, and I hope these guys go far.
Hey James, thank you so much for the follow-up and I am glad to see a happy end. And awesome reaction from MA. Hopefully no more errors of that kind.
Great vid my guy
Thanks mate!
OMG U REPLIED TO ME IVE WATCHED ALL UR VIDS AND I LOVE U
Why doesn't anyone text noise levels with the prop guards on ?? it lessens the noise by half try it
Good idea, will make sure to try that.
Great test I am a owner of a air an to increase battery life is what I need. I will buy some.
Cool! If you order now - it will be the second edition - which is even better.
By the way, I adjusted the gain values of the stealth props correctly before the change!
Pretty sad that they don't give the desired outcome for you. Weird, maybe I have to try measuring with a more pro-grade meter.
Thanks for the info man :) Great video!
Hey Ravi, thanks a lot, mate! 😎😇👍
Excellent review - very thorough, clear & informative - thank you
Thank you so much, John. Just a note - there's the new version now: ruclips.net/video/Hkv-Nk-eQ_o/видео.html Differences are not that big though.
have them installed,,,and the be super low noice :)
Great video and review thanks for sharing cheers 👍👍🇬🇧
Thanks RODPIKER DRONES UK 🍻
Great Video 👍🏿 Loved it
Great review. Thanks will consider buying a pair. If you do a wind test I would be curious. I know that might be difficult to compare would would welcome yours or anyone's coments.
I cannot make any comparison - but have been flying these in extremely wind conditions and it all went well.
Thanks for great video and valuar information for this propellers 😄👍
My pleasure! Looks like Mavic Air 2 will be out soon 😉
Just make sure everyone who have them adjust gain down from 100 to 80 to avoid that motor warning.
Common Sense Logic and Reason how do u do that?
@@ThyagoVideomaker
Have seen several videos on them. The manufactor recommends this.
@@ThyagoVideomaker
www.masterairscrew.com/pages/mavic-air-gain-settings
They didn’t recommend I adjust anything and for Mavic 2 they don’t come with instructions to do so. Air Screw has sent me a second set free of charge and I just started using them ... so far so good..
@@jerseydronerschannel4328
I think it was just the Mavic Air. Never heard of any issues with the Mavic 2.
Good video man, it has been quite useful, good review. For that kind of money is a no brainer to try something to reduce the annoying noise of the Mavic. How much did you pay for the shipping? Paying 15€ for a 20€ item is quite excessive which will make me pass.
This is exactly how much I paid - like $15... Best way is to team up with someone else and get an order of 3 or 4 packs, which will reduce the shipping cost.
Measure dB from sides and back to check for differences.
Yeah, good idea!
I tried the Master Airscrew props on my Magic . They are thin and flimsy , took off and tried to hover about 4 foot up . I could not stay in place , it was like a 64 Impala hitting the switches, front back and side to side . No 3 wheel motion . Very unstable, I landed and replaced the props with the stock ones. Master Airscrewed props went in the trash
Oh... sounds like bad experience and as if something was not right with them.
I found that if you don't turn the drone on it's very quiet and makes no noise. Only downside is that it doesn't move.
👍 Love that comment! 😎
Used for a few hours then started having check prop error messages and unstable hover. Went back to stock and it’s fine. No response from Master Airscrew who did find the time to put up my glowing review that I should have held off on. I didn’t think I could have issues that started after 2 hours of flying time, but I did. Will dispute with credit card company if I don’t hear from them. I have emailed and called. They aren’t checking their voice mail, but they are posting reviews on their site. Not the great customer support I was expecting. Stay with stock everything!
Sounds bad :(
After a few months I am still using them. Well - not flying that often, but I am beyond the 2 hours.
They finally just sent me out new ones and I have no issues so far on either Mavic 2 I fly
I just ordered a set. Can't wait to see how they do. Thanks
Let's hope they will pleasantly surprise you! 😎😇
I grabbed some and are incredibly happy. Really change the drones sound and volume. Love em 😍
Awesome-All I need is some good weather and no rain. Looks like I'm grounded until next weekend .@@robjeeves
What about DJI Care and using those props? Does it void warranty?
How will they know?
Theoretically they may figure that out - because these props are supposed to operate at lower RPM. If you keep the default settings, then there might be messages about motor issue - which will not appear if you follow the instructions from the MA page.
But I don't think it will impact DJI Care.
Tech4All but id does. I talked to DJI support And they confirmed - If any 3rd party stuff (incl. Props) was installed when crash happend - no warranty liability (incl care)
@@danielwro1 Oh, this is bad news :( THank you for confirming back.
Air too loud...always my probl. Thanx 4 this video. Already ordered 2 pairs of those nice props! Thank you so much!
Hopefully it will be a little more quiet after that. 😇👍
Fake comment leave
Just bought a set of MasterAirscrew V2 Stealth props , cost me $72 Australian dollars.
Fitted the props just like I have many times with the originals... The craft lifted off and within 1 foot of the ground it violently flipped over and crashed... :(.
Only 3 props still attached to the my Mavic Air and no signs of the missing Stealth Prop. Not happy about a wasted $72 dollars and potentially losing the cost of my Mavic Air....
Only going use the original DJI Air props from now on...
Man, that's horrible. So sorry to hear about that. Fingers crossed the drone to be alright.
Yes, yes AND yes... best (only) upgrade I have done.... AND it gave me a ***********... Well worth the money IF you hate the sound of your Mavir Air with stock props. Flew it in midle of town... at night... no... I say NO one complanied to me, flying it... I'm amazed!!! A few meters ((yes, european standards... even for you inch guys) google it), it sounded.... well.... almost "dead". I got worried, but noooo... it flew like a bat :o)
If only it could make the spark entirely quiet... :-)
@@TechMishka Air is the only drone I have, so ;oP But U missed an important step when unboxing the props. There is a card with very important gain settings for the engines.
And to be honest, in your video the sound seems louder, than it actually is in real life. :o)
Yes - the card is something I missed showing, therefore I added the nore from MA's website.
And you are right about the noise - it is because the microphone was quite close .
I just got mine in the mail. I noticed the edge on it is sharp as a knife where the stock ones have a very dull edge in comparison. I would hate to hit my finger with these it's going to do some damage.
There will be finger damage even with the stock ones at this high RPM. Thanks for the warning!
You didn't mention that speed will drop by 20%. Is it the result of reducing rotors' speed by 20%? Are you going to get the same results with the original propellers by just reducing the rotors speed in the settings, meaning that these Stealth props are just a waste of money?
The second (and current) variation of the props have the same speed.
Nice
Is it important for the Basic Gain adjustment walkthru (in the packaging) to be dialled in?
I've ordered 2 sets. They are still in transit since 2 weeks since I've ordered them. How long did it take for yours to arrive?
It took like 3 weeks to get them. There used to be a tracking number which was showing the status while the props were in USA, however once they left the United States there was no status.
Yez parrot anafi works with apark locking mechanism of the propellers
Have you used that for a longer time? How does it feel?
@@TechMishka no, is experimental thing i still test them. Seems to be ok
A couple of DBs difference is no big deal... what I am interested in however, is can these props reduce the jello effect that is noticeable in some of my footage out of the Mavic Air? It's mainly when the drone is facing downwards (i.e birds eye view). I've recalibrated the gimbal and no difference, some say replacing the props regularly is good practice, any thoughts?
Hmm, it should not have any jello. Sounds like a problem with the camera or the gimbal itself.
Have you tried with different fps? And changing the hz between 50 and 60?
They DO drift a little more in light o heavy wind...FACT
I have these propellers and yes it's slightly lower, but the drone itself is still loud
The Mini 2 will quickly silence it 😇
Sorry but it looks that when you made messur of noise, you was in different range from mavic. Then it was different noise of props. Isn't it. Thks.
Hi danovkos - the measurement was done from almost the same distance - with the outdoor attempt the firs few seconds the drone was a little closer. So the difference in noise is even greater than what you hear in the video.
danovkos It’s not the actual noise level, it’s the lower pitch. Possibly they are just as loud (in db) as the DJI propellers, but it is a less irritating sound because of the lower pitch and therefore does not travel quite as far.
To be fair you need to test the top speed as well. I suspect that the props carry more volume of air over the prop resulting in less RPMs and therefore less noise and longer flight. But I believe the end result will effect top speed.
Yeah, that's something I did with the second video - ruclips.net/video/Hkv-Nk-eQ_o/видео.html ; The new generation uses similar gain to the originals and the speed difference is ignorable.
@@TechMishka No, it's not ignorable. At the official Airscrew's Amazon page for version 2 of the props they mentioned explicitly that speed drops by 20%.
The drone noise is same but the new props are deeper noise
Yeah, acoustically sounds better.
@@TechMishka i rather use originál props
Personally I think the noise levels are fine out of the box
Until you hear a Mavic 2 flying. :)
Ma props are reducung the noice and increasing battery but in video ir seems more unstable then original
Good for ya! 👍
Thank you for your video! Well put together.
The noise level to us didn't change (decrease) by your video though... :(
Would you do another video that shows the stock battery in multiple runs?
Bibbers and Binx - yes - the values don't drop that much at the start; Because there was a serious peak at the beginning.
Not planning to do further videos about it, but who knows - I may reconsider. There will be a few weeks of intensive use next month 😎😇
Sound Wise they do not worth, time wise they do
It is a step in the right direction 😎 And - although it is not too easy to make the difference from the video, there is a notable difference outdoors, especially when the drone flies higher.
Dji should of spent their money on better flight time...
They did - and make us spend ours on the more expensive models 😎
Noise level is clearly lower and more comfy, but the Drone keeps popping out motor errors.
It would be interesting to see if the prop speed varied by much, maybe the MA props load the motor more than standard and RPM is reduced..
Did you adjust the gain settings as advised by the Master Airscrew website?
@@TechMishka l made no adjustments, there was no such info in the manual attached.
@@slavomx Perhaps they added it on a later stage. The gains have to be set at 80%
How low did you run the batteries in the flight time test? 20% or did ya run them flat?
No, I waited until the auto-land. Prefer not to go below 10%
@@TechMishka Thanks for the reply! So you ran the batteries down to 10%? Really considering getting these for my Mavic air.
I grabbed for my air. At first take off close I was disappointed but soon as I had a bit of distance between me and drone it is significantly quieter. Like WAY quieter. Over 30 away I can hardly hear it compared to originals that were like angry 🐝
Yeah, finally we get something that makes it a little more discrete! 😎👍
What happens if you dont change the settings? How does that affect the flight?
You will get a lot of errors about the Motor's current gain. And the drone will be a little odd sometimes when staying on the same spot. Also I have noticed ascending/descending is a little bumpy for some people, depending on temperature and other conditions.
I have been extensively testing V2 of these - and will publish the material soon.
Hey guys !!!!!!
How do these compare to the home made anafi
According to reports from DJIs forums - the Anafi Props are a little quieter.
I like dji spark then dji mavic air...
The Spark community is super strong! Are you following the facebook group - TheSparkSide? it is quite awesome!
@@TechMishka not yett maybe later..!!because i not plan to buy the spark but i want to buy gopro 7 b first...But i still interested with spark i dk want to buy spark or gopro first?what your opinion
The spark is good.... not quite the video quality of Mavic Air....
Of course the Action camera will be used much more often :-) If I were you - I would have chosen an action camera too.
SOme people say that the Spark has capability for 4K which is being restricted by the software.
I tried the master airscrew v2. There was a noise reduction of 10 to 15 BD. But after flying just 10 minutes the propeller ends looked as if a rat had snapped at it. I returned all back to master airscrew. Never again!
Ouch! Do you have a photo of that?
Tech4All yes. But how can I send or publish it?
@@bodovonderdonau1964 You can share it in some of the international facebook groups. Or send it over to contact@tech4all.net and I will see what I can do.
Should I buy the dji mavic air 2 year's later
It still is a good drone! Maybe we should wait until the early spring days - just to make sure there won't be any new generation coming.
@@TechMishka Thank you
How does it compare to the Mavic 2 noise level
The Mavic 2 is still quieter.
It's not worth changing for the slightest of difference .
True that!
Um the noise level doesmt bothere me 100+feet up and prob600+ feet out from me. Im not trusting my 900 dollar drone with some 3rd party props to fly 400 feet up just because of noise. F what other people think
I like the way you said that, although I like these a lot.
are they certified by DJI ? i don't want to put un certified props on my drone in case it put more stress on the motors
They are actually more efficient and produce less stress on the motors which is why you are suppose to turn down the gain to 80% on the props because you don't need to use as much power to get the same factory performance. If you don't turn down the gain the motors generate too much power than the props need and cause the craft to shutter a little in flight.
They seem to not be. Someone has tried getting in touch with DJI support and they seem to be reluctant to respect DJI care and warranty when using those. I am not quite sure it is officially confirmed or not.
Can i know..can the mavic air cut finger if we touch the wings?
Maybe you had a experience or knowledge about that...?
Yes, the RPM on the props of the Air is a bit higher than usual, so it can definitely harm you. 🤪
@@TechMishka wow..nightmare,always be carefull Michael..👍👍
I’ve been whacked by my Mavic Air on my fingers and it stung, but no cut. They flex easily. YMMV!
@@kendallcollier3076huhu
I've been hit by the spark props, similar but slightly lower RPM and it cut deep. Took about an hour for the bleeding to stop. So yes depending on how fast they spinning and what part of the body it can cut, but not slice off your finger. Might need some carbon fibre props for that 🥺
Compared to my ph3s I thought the air was quiet already
The "Air" is perhaps the noisiest model - mostly because of the high RPM of the props.
noise level is just the same,the only difference is just the pitch...
Not true, I have the stealt props... and when you here the difference IRL, big difference. The noise reduction IRL is better than you can hear in this review.
Do the motors get hot at all?
I haven't noticed them being hotter than usual.
does it affect the top speed?
Yes, the top speed decreases a little.
your mavic only flies for 15 minutes? must be a defect. mine goes for 20 minutes
Indoors, stress for all sensors, no movement - this is normal behavior.
Chukwudumebi Beno you get 20 minutes from a Mavic Air? That’s amazing!!!!
Sean Ozz turn off obstacle avoidance, go easy on the sticks ( no sharp movement ) and fly on a day with less wind
I know that this is an older comment, and you may not even have the mavic air anymore, but what percentage did you drain the battery to? If you drain the battery really low, then you get more flight time, but its not good for the battery. Its best to land between 25-30%
@@clmfilms8103 I still have the mavic air. I try to land on 20/30% now. Yes you should always land with at least 30% power for emergencies. Back then I used to land on 5/10% power
I think the maker of those stealth props should be hit with class action lawsuit! what bullshit! Perhaps an education to what the word STEALTH means right in the pocket!
Interesting note! well... 😇
Compare noise to Spark?
Hmm, haven't tried that! I believe the spark is quieter.
@@TechMishka I love the Spark. And have a Mavic Pro. The Air fits right in between perfectly but its so damn noisey. I can get away with the spark and low noise props on the Mavic and not bring too much attention to them. These props get me closer to pulling the trigger on one
@@DigitalNinja3 There's now the second edition that I'm about to test and will share the results soon.
@@TechMishka B&H has the Mavic Air priced at $600
I’ve seen advertisements from masterscrew that claims a 50% noise reduction. I have some beachfront property in Yuma,Arizona that I can sell to you if you believe that kind of hogwash.
50% noise reduction is not fair to be claimed... They are quieter, but not that much.
Post the link to that ad....?
BAM BAM I believe it was a pop up ad when I was on Facebook. I have a screenshot of it but not sure if I can post it here. If you provide an email address, I can send it that way.
What MA says is this “Aircraft noise is reduced by 3.5dB (50% noise power reduction). Lower pitch sound is less noticeable and irritating. Nominal values measured in hover and compared to stock propellers.” So yes, it is 50%.
Koen van Gestel while technically their claim may be correct on paper or in theory, my ears hear a different story. Still not a believer.
CE or Fcc?
Works with both modes. I personally use the FCC mode.
Great review. I take it that these were the Version 1 props. I have just reviewed the version 2 props and perhaps they have tamed them a little so the Mavic settings don't need adjusting. I found the new ones give an extra 7% to 8% approximately. Still an amazing improvement on the originals. ruclips.net/video/bggZS4PHbdE/видео.html
Thanks Quadcopter 999 - these are indeed the v1. Thanks for sharing your thoughts on the new version - they look promising!
Can't hear enough difference to bother!
There is some. Mostly related to the sound frequency.
Did you get the Motor Current Error when attempting to fly in Sports Mode ?? I don't think they are quieter.. they are a lower pitch but not really quieter. I'm really disappointed in the claims and not worth the $20 dollars in my opinion.
titiwiti2001 - you get the error if you don't set the gain right.
And if you fly higher - that different sound frequency makes a big difference.
Maybe you can check if MA have return policy and return them back.
Tech4All I did set the gain right. I got these first thing and they hadn’t added the notes about the gain until I submitted the error report. They will take a refund but I still get the motor error even with the gain set correctly. It isn’t as frequent but I still get it. I was really hopefully of these but I just don’t think they are worth it.
My friend, I am an avant-garde, how to download applications to a chaotic hour
Hi Mustafa - not sure what you mean by that question... Could you explain a little more?
Hi ... thanks for your reply
i have shawmi watch i would like to install some app. just like maps and etc ... but i did not know how to install them.
I do not know how to enter applications for the clock AMAZFIT VERGE
@@mustafaib1680 There is no way to add more apps to the Verge.
Thank you. How do I add the clock to the Verge?
Where are you from ?
JUST GET ANAFI LOL
On the to-do list 😎👍
Anafi still is noisy not entirely quiet!
Coolride17 hoovering? I didn't know they could be used as a vacuum! Lol
Mavic air is better in all other aspects besides prop noise....
Coolride17 ANAFI has one ultrasound and one optical flow looking downwards
difficulty understanding
captions 😇?
For 10 bucks maybe but not for 20 😕
The difference between 10 and 20 is exactly 10! 😎
No real difference from the DJI props...
Have you tried these yourself?
Just stick with the original propellers..... all this other stuff is a waste of money & time....& most of all, Why do you wanna stealth fly anyway. Sounds like you have something to hide..... if it’s surly stealth, & what are you trying to do that you need to be incognito? Hmmm....... I’m just saying
They make the sound more ... acceptable. Nothing to hide - but if we can keep it quieter, then why not?
But got your point and respect it! Cheers, Terry
@@TechMishka Lmao.....I was just pullin your chain bro.....i wasn't serious. I have a Mavic Pro & i'm not worried about it's sound.....i just fly.
My advice is stay away from these props MAS are a shower of gangsters, I have had a very nasty encounter with them, DON'T BUY IS MY ADVICE!!!
Gangsters?! wow! WHat happened there?
What utter drivel
Why do you think so?
Paid ad
Well - nope. But that's a serious issue with reviews and articles nowadays - you never know how honest they are in reality. I simply like these props, and enjoy the v2 even more.
I don’t have a drone because they all are obnoxiously loud.
The Mavic Pro Platinum is really quiet. Also the latest Anafi drones are.
none of them are ‘really’ quiet. Loud at best when 20 feet off the ground