This was a big help as I recycled old decking that my now-deceased father-in-law built, and turned them into a planter just like this one. Thanks for making it easy for a novice :-)
They look really nice, well done, not sure I’d have had such a big over hang but personal choice. Two tips, if you can get the big pallets they are normally treated and can be routered to make a decking board effect, would also give you your legs and cross members and I’d glue the top with a bend clap before fixing helps to stop them separating over time.
Thanks for the tips! It's not that often that I see the really big pallets tbh but when I do I always think about what I could use the timber for. Your ideas are very helpful. Thank you, Des
Superb Des. I've previously made two decking board planters and now plan to make another 120 cms x 48 cms x 48cms ish lol and your video is a great reminder as to how to go about it. I hope that all is well with you. Thank you. Paul 👍😊
Last thing I noticed at the end - decking boards are pressure treated but only so far into the wood. When you cut the boards you're exposing untreated wood. I seal the ends as I put them together with either external wood glue, clear silicone or raw linseed oil depending on what I've got to hand with the raw linseed oil being the last choice. The end products look amazing!
Iv just made 8 trough planters from decking for my.mum and her neighbour 4 each and bird nesting boxs with the off cuts also had some other off cuts inch and quarter by quarter inch and made shaped paint stirers and the very small off cuts from the decking I cut again and made door wedges for when I'm painting doors to prop open stop them moveing.. I hate throwing any wood away big or small therrs always some use. Great vid again all the best and great end product.
Great response my friend. Like yourself, I hate throwing stuff away unnecessarily and I use left overs where I can in other projects. Stay safe and well. Des
You made a nice job of them Des. Well done. 👍I made one similar for my sister-in-law last year. Started with bigger legs but like you reduced them which looked better. 😁
They are great. You said they are not perfect but it's outdoor furniture and wouldn't want it to look like indoors furniture, so all I can say is just perfect..
Hello there my friend. That really is very generous of you to say so. I really appreciate your kind words of support. have a great weekend where you are. Best wishes, Des
I’ve been looking for tips so I can have a go at building my own since I have left over decking, I really enjoyed this video and it was really helpful thanks!
Subscribed - Good video fella. With the frame around the top of the planters, I would have glued the frame together first to get the mitres perfect then screwed it down as one piece, almost like kitchen pelmet would be done for under/above a unit.
Hello there and thanks for subscribing and taking the time to comment - appreciated. Gluing would certainly have worked and been a good idea. Cornice and pelmet above and below kitchen cabinets is a good example. Best wishes my friend, Des
Hi there and thanks for your kind words. From memory (and based on prices at the time) between £25 - 30 each. Peanuts for such a thing. Best wishes, Des
Good luck with that buddy. I'm not a professional joiner and this was my first project using a circular saw but they turned out pretty decent to be honest. Good luck with that mate. Best wishes, Des
Very nice! Beautiful planters! Just one point to consider, the heat of the soil and the plastic are going to keep the bottom supports always moist or wet, they won't last long, it may be good idea to use some composite boards just for that area. Just my opinion. Great job anyways.
@@21stcenturycaveman33 Mitred corners look much better which makes it worth the extra effort. I used decking to make 8 hexagonal raised beds. The combination of mitred corners and having the grooved side of the boards facing outwards really adds to the overall look of the finished beds.
I like the idea of using a miter on the ends, definitely makes a change to the standard way of doing things. Small tip, when using a miter saw it's important to let the blade stop before pulling it out but you don't have to do this with a circular saw. As it moves, you've got more chance or grabbing the wood and getting some kick back or marking it. Your cut at 6:50 shows you wobble the saw slightly. If that had been the other way you'd have caught your piece of wood. Best to cut straight through to avoid this.
Looks first class Des , well done. I'm going to try and make these myself self next year. Wickes have 2.4m decking boards , providing there's no cock ups on the measuring how many of those would one of your boxes need?
Hurrah! Finally a man my parents age who measures in metric 😁 I half expected to hear 2 1/2 foot etc and roll my eyes 😂 they look fantastic! Please add a pic of them stained and planted. I can't wait to make mine. Thank you.
Emma Davies, I have a garden and have dreamt to have a planter like this to buy from the DIY shops but can't find any anywhere already made, unless someone has to make it for you. The reason why I want it is because the soil in my garden is very stony and clay. Impossible to dig or till the ground. I thank him for showing us how to build a wooden garden trough. Blessings.
Ahh, what a brilliant idea. Now why didn't I think of that! Thanks for your input. That really is a great idea because they are heavy. Best wishes, Des
Check for used decking, lot of it being stripped out. Cleans up like new with scrubbing or pressure washing. Frame from decking cut in strips screwed together to obtain thick ness All wood surfaces not seen coated with old engine oil. If painting overall coat all wood before construction with old engine oil. It dries fast and odourless and really preserves the wood. Can be then under coated and painted with modern acrylic.
Hi there. It's a really difficult one to describe in words I'm afraid. Put simply, decide what overlap you want on the capping, set them on the base, mark carefully and then cut your diagonals.Sorry if this isn't as detailed as you require my friend. Best wishes, Des
oh my god 😍 Its very Amazing I think glue should not be used on wooden structures that are in contact with water I made it smaller (in my youtube channel) But the wood glue gets rotten
Just finished making mine after carefully following your video. Thanks, you made it really easy to follow for the complete amateur like me! Just a quick question, did you screw in the slats that act as the bed of the planter? Thanks again Steve
How much decking do you need to build one planter considering they are 2.4 meter long and not to forget the pice on top like a picture frame, if you don’t mind me asking
Hi there. So sorry for late response. The main one was as follows: www.screwfix.com/p/evolution-r185ccsl240-1200w-185mm-electric-circular-saw-220-240v/285fj If you can pick one of these up for 50.00 or less they're an absolute bargain mate. Stay safe and well, Des
From Amazon Roger. www.amazon.co.uk/Tacwise-A11-Type-Hammer-Tacker/dp/B003OWR2HA/ref=sr_1_6?dchild=1&keywords=hammer+tacker&qid=1619683945&refinements=p_72%3A419153031%2Cp_89%3ATacwise&rnid=1632651031&s=diy&sr=1-6
Absolutely fantastic!!! I might give this project a bash, but only use one length of decking board, so it will be a lot shorter. What did you stain them with?
Hello there. Glad it helped. I used the following which was very good value and seems to work well: www.screwfix.com/p/no-nonsense-anti-slip-quick-drying-decking-stain-slate-2-5ltr/7791x
Great looking planters, but I have a question. I'm wondering why not have the lining come over the top of the walls (under the capping). It was cut short of the top, any reason for that? Seems like an opportunity for water to run down between the lining and the walls.
Hi there. I used Wickes premium boards not their cheapo stuff. From memory they are about 140/150mm wide and the lengths were 2400mm long. They're good boards and will last for ages. Stay safe, Des
Hello! How much would one cost to make at present day, as i know the price of wood has gone up dramatically. Approx cost would be so helpful. Thank you in advance!
Hi Tracey. For a similar size unit, just the timber will be about £70.00 (based upon Wickes prices). Then you've got the decking screws (@£10.00) and some stain or paint if you want to do that. Hope this helps, Des
Hello there, it was the previous version of this saw: www.screwfix.com/p/evolution-r185ccsl240-1200w-185mm-electric-circular-saw-220-240v/285fj It was excellent. ATB, Des
Hello there and thank you for your kind words. I hope your project turns out great and you're happy with your endeavours. Best wishes my friend and thanks for dropping by. Des
Please could you print the bill of materials somewhere in these comments? Based on the costs / qtys on your notepad these work out at £50 per box unless it was £5 for all the decking? Also your notepad said 75 x75 fence post but you used different in video for uprights and battens. Was that 50x75? I would argue that for the base you could use any old wood (e.g a pallet) as it's not visible
Absolutely great and detailed video! I'm just trying to get more into DIY projects and woodworking. I've previously just done really minor projects with a hand saw, nails and a hammer really. I've invested in some power tools now (drill, circular saw, impact driver, angle grinder) but I'm still trying to actually learn how to properly use them. The only tools I've used so far are the drills and they're great! I wanted to ask what the table type things are that you use (2:06 ) and they seem to have clamps on them to hold wood. Also, thanks for mentioning the metric speed square in the video - I'm looking to get one of them too but wanted to ask if you think a 7" one would suffice or if I should get one bigger. Also, are there any other bits and pieces you reckon I should look into that could help me with various projects over the years? Please and thank you in advanced!
Hello there and thanks for taking the time to watch my vids - very much appreciated. Sounds like you've got the right tools there to start with my friend. In the video, I'm using a Black & Decker work bench and some clamps to secure the timbers to this. Regarding the speed square - I initially bought the smaller one as seen in the video. However, I have since also bought the larger 12"model (both are in metric). I find that the larger one is much better for cutting larger pieces of wood and the profile which the saw runs against isw bigger and therefore a little safer. However, if you only need one then get the smaller one. Other things worth considering as follows: 1) appropriate PPE, such as, gloves, goggles and ear protectors (all essential) 2) portable RCD (essential with any power tool) www.amazon.co.uk/gp/product/B000RZDNZM?pf_rd_r=RKKZP052QKP2GHMX9BH0&pf_rd_p=e632fea2-678f-4848-9a97-bcecda59cb4e 3) small selection of clamps for securing timber, etc. 4) Hand saw then you don;t want the faff of setting up your power tools for a smaller job Hope above helps, Des
Hi Hassan, please accept my apologies for the delay in getting back to you. This is a really good question and I decided to do a video response to it. I've done the vid, just editing. Will let you know when I've uploaded. ATB, Des
@@21stcenturycaveman33 Hiya Des please don't be silly, I really appriciate that you got back to me! Thank you for your advise and information I really look forward to watching your new video on the subject too! Thank you very much, I really appriciate it!
Absolutely amazing. I was admiring the hanging baskets for the first part of the video lol. You have done a fine job. Did the capping at the top stay in tact through all the seasons, as I know wood will expand/contract with the rise and fall in temperature. Also did you cut the all four pieces of the capping to the measurements you did in one go, or did you cut one piece, bolt it on, and then mark the second piece by placing it on the secured piece and so on... sorry if the question does not make sense. I am asking because I know some people swear by securing one piece down first, and then marking the second piece up off the first one. Cheers, Ali.
Hello there Ali and thanks for taking the time to watch this video and to comment - appreciated. Some very good questions indeed. (1) The capping - if I do this again I will attach a small batten to the underside of the capping to secure it better. Basically, if there is more timber to secure the capping to then there will be less chance of it warping. Plus, it will be a much stronger and more secure fit. (2) Your question makes perfect sense. I did NOT cut the capping all in one go. As I am not a professional joiner the build would not have been accurate enough to do this. Therefore, I cut each piece of capping separately to ensure the best fit. I have also since placed the legs on plastic blocks to keep them off the ground to prevent them rotting (plse see link below - I turned these cups upside down to rest legs on and they work great) . Another viewer has also suggested putting castors underneath to allow them to be easily manoeuvred which is a great idea. Best wishes, Des www.wilko.com/en-uk/wilko-large-clear-castor-cup/p/0344740
@@21stcenturycaveman33 Thank you for taking the time to respond Des, much appreciated 🖒 Yes the capping makes sense, it's definitely very neat. I posted a question on a forum about whether dowling mitres together would be a good idea, and the experienced joiners advised adsolutely not to do this due to the wood expanding and contracting. Thanks again, and look forward to watching more of your videos. This is the third video of yours that has been so helpful. The others being the one on skimming, and lifting floor boards, if I remember correctly 🖒
Good effort - well done sir! If I might provide some constructive feedback - I have some sympathy with Troy Yarbrough's comment - the solution is a tripod which are cheap as chips to buy and will make future videos much more watchable. The other thing is if you make something like this that has a specific function - then show your viewers how you use it, i.e. it'd be great to see the planters planted up! ;-)
Hello there and thank you for your valuable feedback. I do actually have a couple of tripods (and use them believe it or not!) and I understand where you're coming from. Apologies if my amateur film making made it less enjoyable to watch. There are a couple of further vids on my channel showing them planted with flowers. Unfortunately, due to time constraints (and multiple projects running concurrently) it is not always possible to show the project completely finished, i.e. planted up in this case. Best wishes my friend, Des
Hy Mr caveman, I'm after ur opinions on wood preserving brands. Iv made some large gates from redwood which I'm told is a softwood but a hard softwood but I stil have to treat it obviously. Many brands out like sikens, sadolin ect, some are crazy prices. One place wants £85 for a 5 litre tin. No way am I paying that. I will probly burn with a blow torch like the Japanese the frame on the inside of gates as this is the best way to preserve wood and I think it looks amazing once rubbed down and clear coated but my Mrs doesn't like it so for the side which can be seen by the street I'm looking for very good stains. Any suggestions I'd appreciate
Hello Sir. Thank you for contacting me and expressing confidence in my opinions. Unfortunately, however, I am not an expert in this area and cannot offer any advice in this regard. If I were you I would check some of the forums and look at reviews to see what others have to say who may have more experience than myself. Sorry I can't help. ATB, Des
@@21stcenturycaveman33 Hi Caveman, I work with troubled at risk youth, I currently have a young man who is interested in making a planter box as a apology gesture, can i trouble you for the measurements and types of timber for the entire project
@@kiriatangaroa9191 Hello there and apologies for the late reply (I thought I'd already responded and only just noticed I hadn't - sorry). Unfortunately, I don't have a full specification as this wasn't intended to be a tutorial - just an example of what can be achieved. However, I have included links to the materials used which I hope helps you. Your work must be very challenging and you have my utmost respect. Please see below: www.wickes.co.uk/Wickes-Treated-Kiln-Dried-C16-Timber---45-x-70-x-2400-mm/p/166401 www.wickes.co.uk/Wickes-Premium-Deck-Board-28mm-x-140mm-x-2-4m/p/101000 www.screwfix.com/p/timbadeck-double-countersunk-carbon-steel-decking-screws-4-5-x-65mm-500-pack/73014 Please note that all of the above materials were purchased when on offer so as to reduce cost. Kind regards, Des
they are very good, they dont need to be perfect, it adds to the beauty of the garden and the accomplishment of making something yourself, well done!!
That's very kind of you Samantha and I agree with you entirely. Thank you very much. Best wishes, Des
This was a big help as I recycled old decking that my now-deceased father-in-law built, and turned them into a planter just like this one. Thanks for making it easy for a novice :-)
You're very welcome! Des
Great design and final aesthetics 👏
Very kind of you. Thanks very much, Des
I made one of these yesterday and I'm thrilled with the result. It looks amazing. Thanks for the inspiration Des. 😍 ~ Ann (aged 61).
You are so welcome! Delighted to hear your wonderful feedback Ann. Best wishes, Des
Just used your idea and made a smaller version yesterday to hide my well. Looks great! Thanks for the idea.
Glad it helped! Des
They look really nice, well done, not sure I’d have had such a big over hang but personal choice. Two tips, if you can get the big pallets they are normally treated and can be routered to make a decking board effect, would also give you your legs and cross members and I’d glue the top with a bend clap before fixing helps to stop them separating over time.
Thanks for the tips! It's not that often that I see the really big pallets tbh but when I do I always think about what I could use the timber for. Your ideas are very helpful. Thank you, Des
Superb Des. I've previously made two decking board planters and now plan to make another 120 cms x 48 cms x 48cms ish lol and your video is a great reminder as to how to go about it. I hope that all is well with you. Thank you. Paul 👍😊
Thanks Paul. I hope you and yours are all good. Take care mate, Des
A great example to other You tubers! No waffle, no shouting at us, just well presented and a good product at the end. Well done!
Thanks so much! I appreciate your very kind feedback. Best wishes, Des
I will definitely use your video as a great guide to building my own. Thanks.
Glad it was helpful! Good luck my friend, Des
I'm about to make a planter this weekend, my first DIY project ever! Your video is really helpful thank you :)
I'm so glad! Good luck, Des
you make it look so bloody easy!
Perhaps Ive just got a good video editing suite? Best wishes, Des
Amazing!! Thanks for sharing! I will be using this for making my first planters!!
You are welcome Jess. Des
They look fantastic,,, you've inspired me to give it a go👍
Thank you very much. Go for it and the best of luck with your project. Stay safe and well, Des!
Looks 10 times better than the one I made. But that was before I saw your vide. Great job.
That's very kind of you to say so . Practice improves everything my friend. Keep at it. Des
There not okay, There absolutely Lovely and I am looking forward to seeing what wonderful plants you place in them. Well done, 😀👍
Thanks so much 😊 Appreciate your kind words of support. Stay safe and well, Des
Thanks for this - just what I was looking for!
My pleasure. Des
Very nice planters - well done 👍
Thank you! Cheers! Des
Last thing I noticed at the end - decking boards are pressure treated but only so far into the wood. When you cut the boards you're exposing untreated wood. I seal the ends as I put them together with either external wood glue, clear silicone or raw linseed oil depending on what I've got to hand with the raw linseed oil being the last choice.
The end products look amazing!
Very good and easy to follow. I will be making one soon based on your method
Go for it. If you're nopt that experienced with carpentry / joinery - just butt the edges together and they will still look great. ATB, Des
Iv just made 8 trough planters from decking for my.mum and her neighbour 4 each and bird nesting boxs with the off cuts also had some other off cuts inch and quarter by quarter inch and made shaped paint stirers and the very small off cuts from the decking I cut again and made door wedges for when I'm painting doors to prop open stop them moveing.. I hate throwing any wood away big or small therrs always some use. Great vid again all the best and great end product.
Great response my friend. Like yourself, I hate throwing stuff away unnecessarily and I use left overs where I can in other projects. Stay safe and well. Des
Well done mate. Good job.
Thanks very much, Des👍
You made a nice job of them Des. Well done. 👍I made one similar for my sister-in-law last year. Started with bigger legs but like you reduced them which looked better. 😁
They look great. Easy to follow video and my next project for the next bank holiday. Well done.
Thanks very much. Appreciated. Good luck my friend.. Des
They are great. You said they are not perfect but it's outdoor furniture and wouldn't want it to look like indoors furniture, so all I can say is just perfect..
Hello there my friend. That really is very generous of you to say so. I really appreciate your kind words of support. have a great weekend where you are. Best wishes, Des
Thank you for creating this video
It's my pleasure. ATB, Des
Turned out great. Another project I can add to my list 👍
Enjoy! ATB, Des
Nice job the capping on the top looks great too!
Thanks very much for your positive feedback. Best wishes, Des
Until they ‘cup’!
Excellent. 👏👏👏
Thank you! Cheers! Des
Nice idea. Good use for leftover decking. Thanks!
Thanks for taking the time to drop by my friend. Stay safe and well. Des
I’ve been looking for tips so I can have a go at building my own since I have left over decking, I really enjoyed this video and it was really helpful thanks!
Glad you enjoyed! Best wishes, Des
Brillant job
Thank you very much. Des
Giving me the courage to try these.
Stand tall and be brave Meerkat - go for it. ;?)
Subscribed - Good video fella. With the frame around the top of the planters, I would have glued the frame together first to get the mitres perfect then screwed it down as one piece, almost like kitchen pelmet would be done for under/above a unit.
Hello there and thanks for subscribing and taking the time to comment - appreciated. Gluing would certainly have worked and been a good idea. Cornice and pelmet above and below kitchen cabinets is a good example. Best wishes my friend, Des
I'd be DELIGHTED if my projected turned out as nice as this. Lovely job!
Thank you. That's very king of you to say so. They really are very sturdy and were well worth the time and effort. Best wishes, Des
They look lovely.
Very kind of you to say so. Thank you. Des
Really Nice job
Thank you! Cheers!
Great looking planters ;-)
Thanks 👍 ATB, Des
100% perfect I struggle doing the mitre .
Hello there. Very generous of you to say so my friend. Best, Des
Very nice job and well presented video. What was the approx finished cost per planter please ?
Hi there and thanks for your kind words. From memory (and based on prices at the time) between £25 - 30 each. Peanuts for such a thing. Best wishes, Des
Good job. Been considering making some for a while, and this video has encouraged me to get on with it! Thanks
Good luck with that buddy. I'm not a professional joiner and this was my first project using a circular saw but they turned out pretty decent to be honest. Good luck with that mate. Best wishes, Des
Real good idea, and looks brilliant .How about a small work bench for garden shed?🤔🤔🤔👍
You never know ..... ATB, Des
Looks well ted
Cheers buddy. Stay safe and well. Des
Awesome..👌🏻
Nice and Simple..Cheers..👍🏻
Thank you my friend. ATB, Des
Nice box
Very nice! Beautiful planters! Just one point to consider, the heat of the soil and the plastic are going to keep the bottom supports always moist or wet, they won't last long, it may be good idea to use some composite boards just for that area.
Just my opinion. Great job anyways.
You may well be right my friend. Sounds logical enough. Thanks for your comments. Best wishes, Des
You can also line it with weed barrier control matting , it’ll keep the compost off the wood but let the water out and let the wood breath.
Fantastic job and brilliant tutorial, thanks👍
Nice job mate.
Thank you buddy. Appreciated. Des
These look great, thanks!
Glad you like them! Des
Nice job, always hard to get perfect 45’s with a circular saw, they look great
That's very kind of you to say so. They're far from perfect but still look pretty good in my opinion. Take care, des
@@21stcenturycaveman33
Mitred corners look much better which makes it worth the extra effort. I used decking to make 8 hexagonal raised beds. The combination of mitred corners and having the grooved side of the boards facing outwards really adds to the overall look of the finished beds.
These look great
Do you know what? They're not bad at all are they? Also, absolutely solid. have a great weekend my friend. Des
Cool planters dude...
Thanks Curly. Stay safe and well, Des
Great video. Just be careful the fashion police dont call to the house after watching. Black socks and shorts. Thanks for posting. Inspired me.
Ha, ha. Point well made Sir. Just as well they weren't white socks - would be in the slammer now!Stay safe my friend. Des
Great video ☺
many thanks. Des
I like the idea of using a miter on the ends, definitely makes a change to the standard way of doing things. Small tip, when using a miter saw it's important to let the blade stop before pulling it out but you don't have to do this with a circular saw. As it moves, you've got more chance or grabbing the wood and getting some kick back or marking it. Your cut at 6:50 shows you wobble the saw slightly. If that had been the other way you'd have caught your piece of wood. Best to cut straight through to avoid this.
Thanks for your valuable feedback. Best wishes, des
Chewing yourself to bits with circular saw use a mitre saw. And clamp both ends of timber. Done in half the time. Of course if you have one 😂
Well done they look great. Think I would have inserted some rubber grommets where you have drilled the holes in the base.
Thank you
You're welcome
Looks first class Des , well done. I'm going to try and make these myself self next year. Wickes have 2.4m decking boards , providing there's no cock ups on the measuring how many of those would one of your boxes need?
Hurrah! Finally a man my parents age who measures in metric 😁 I half expected to hear 2 1/2 foot etc and roll my eyes 😂 they look fantastic! Please add a pic of them stained and planted. I can't wait to make mine. Thank you.
My pleasure. Hope it helps and good luck with yours. Here's the finished product:
ruclips.net/video/u9uEWYNOaUE/видео.html.
Emma Davies, I have a garden and have dreamt to have a planter like this to buy from the DIY shops but can't find any anywhere already made, unless someone has to make it for you. The reason why I want it is because the soil in my garden is very stony and clay. Impossible to dig or till the ground.
I thank him for showing us how to build a wooden garden trough.
Blessings.
Good job. I'm going to put wheels on the legs to enable it to be relocated easily.
Ahh, what a brilliant idea. Now why didn't I think of that! Thanks for your input. That really is a great idea because they are heavy. Best wishes, Des
That will also keep the legs off the ground therefore prolonging their life
Nice job, even better because you didn't need/use unrealistic tools that the average Joe doesn't keep lying around.
I appreciate you taking the time to watch and leave feedback. Thanks very much and have a great day where you are. ATB, Des
Check for used decking, lot of it being stripped out. Cleans up like new with scrubbing or pressure washing.
Frame from decking cut in strips screwed together to obtain thick ness
All wood surfaces not seen coated with old engine oil.
If painting overall coat all wood before construction with old engine oil. It dries fast and odourless and really preserves the wood. Can be then under coated and painted with modern acrylic.
Thanks for your valuable feedback mate. ATB, Des
Great Job Sir , How did you work out the capping dimensions .. please advise
Hi there. It's a really difficult one to describe in words I'm afraid. Put simply, decide what overlap you want on the capping, set them on the base, mark carefully and then cut your diagonals.Sorry if this isn't as detailed as you require my friend. Best wishes, Des
Nice job and reducing the legs made them look better too. Liked the placement. Gazeebo next?????
Never say never Ade. :?)
oh my god 😍
Its very Amazing
I think glue should not be used on wooden structures that are in contact with water
I made it smaller (in my youtube channel)
But the wood glue gets rotten
Agree entirely my friend which is why I didn't use it on this build. Best wishes, Des
Just finished making mine after carefully following your video. Thanks, you made it really easy to follow for the complete amateur like me!
Just a quick question, did you screw in the slats that act as the bed of the planter?
Thanks again
Steve
HIya Steve. Great to hear buddy. Yes, I did screw them in - just one each side mate. Congrats, Des
looks good.
Thanks very much. Des
Looks great. I am thinking about building this to cover a well. Your grass looks nice and green. What kind of wood were you using? Cedar?
Hi. No not cedar. Just pressure treated decking. ATB, Des
How much decking do you need to build one planter considering they are 2.4 meter long and not to forget the pice on top like a picture frame, if you don’t mind me asking
Beautiful..what tools and saws did you use?
Hi there. So sorry for late response. The main one was as follows:
www.screwfix.com/p/evolution-r185ccsl240-1200w-185mm-electric-circular-saw-220-240v/285fj
If you can pick one of these up for 50.00 or less they're an absolute bargain mate. Stay safe and well, Des
Where did you buy the hammer-stapler thingy?
From Amazon Roger.
www.amazon.co.uk/Tacwise-A11-Type-Hammer-Tacker/dp/B003OWR2HA/ref=sr_1_6?dchild=1&keywords=hammer+tacker&qid=1619683945&refinements=p_72%3A419153031%2Cp_89%3ATacwise&rnid=1632651031&s=diy&sr=1-6
Very good, they look great. About how many lengths of decking boards would you use to make one ?
Hiya buddy. From memory 5-6 lengths of 2400. Hope this helps. Des
Hey 21st Century Caveman. Really enjoyed your clip. Have you written the dimensions and sizes down?
So sorry but I haven't. You can make them whatever size you want. ATB, Des
great work very good
Thanks buddy! ATB, Des
Absolutely fantastic!!! I might give this project a bash, but only use one length of decking board, so it will be a lot shorter. What did you stain them with?
Hello there. Glad it helped. I used the following which was very good value and seems to work well:
www.screwfix.com/p/no-nonsense-anti-slip-quick-drying-decking-stain-slate-2-5ltr/7791x
They will certainly do ...
Thank you kindly, Best wishes, Des
Great looking planters, but I have a question. I'm wondering why not have the lining come over the top of the walls (under the capping). It was cut short of the top, any reason for that? Seems like an opportunity for water to run down between the lining and the walls.
I would certainly do that in my next build. ATB, Des
A seceret voice told me to watch this seceret video so watching secretly 👍
Ssshhhh .... don't tell everybody! Stay safe and well, Des
Great job, thanks for sharing it!
Can you tell me the size of the timber what you have used please?
thanks
Hi there. I used Wickes premium boards not their cheapo stuff. From memory they are about 140/150mm wide and the lengths were 2400mm long. They're good boards and will last for ages. Stay safe, Des
what size are the timbers that you fix the decking too ?
Hi, 2 x 3" timbers . Thanks, Des
Another great and helpful video, thank you.
How are these holding up?
I'm thinking of using some to make raised beds.
All good my friend. The mitred angles have opened up a little but they still look great. Perfect for raised planters. ATB, Des
Pretty decent I think I’ll copy you if you don’t mind
Feel free my friend. Enjoy. Des
Hello! How much would one cost to make at present day, as i know the price of wood has gone up dramatically. Approx cost would be so helpful. Thank you in advance!
Hi Tracey. For a similar size unit, just the timber will be about £70.00 (based upon Wickes prices). Then you've got the decking screws (@£10.00) and some stain or paint if you want to do that. Hope this helps, Des
what mitre saw are you using
Hello there, it was the previous version of this saw:
www.screwfix.com/p/evolution-r185ccsl240-1200w-185mm-electric-circular-saw-220-240v/285fj
It was excellent. ATB, Des
You're too hard on yourself. They look great! I'm building my 1st planter boxes this weekend and I hope they turn out half as good as yours. ✌️ 🐯
Hello there and thank you for your kind words. I hope your project turns out great and you're happy with your endeavours. Best wishes my friend and thanks for dropping by. Des
Please could you print the bill of materials somewhere in these comments?
Based on the costs / qtys on your notepad these work out at £50 per box unless it was £5 for all the decking? Also your notepad said 75 x75 fence post but you used different in video for uprights and battens. Was that 50x75?
I would argue that for the base you could use any old wood (e.g a pallet) as it's not visible
Nice
Absolutely great and detailed video! I'm just trying to get more into DIY projects and woodworking. I've previously just done really minor projects with a hand saw, nails and a hammer really. I've invested in some power tools now (drill, circular saw, impact driver, angle grinder) but I'm still trying to actually learn how to properly use them. The only tools I've used so far are the drills and they're great! I wanted to ask what the table type things are that you use (2:06 ) and they seem to have clamps on them to hold wood. Also, thanks for mentioning the metric speed square in the video - I'm looking to get one of them too but wanted to ask if you think a 7" one would suffice or if I should get one bigger. Also, are there any other bits and pieces you reckon I should look into that could help me with various projects over the years?
Please and thank you in advanced!
Hello there and thanks for taking the time to watch my vids - very much appreciated. Sounds like you've got the right tools there to start with my friend.
In the video, I'm using a Black & Decker work bench and some clamps to secure the timbers to this.
Regarding the speed square - I initially bought the smaller one as seen in the video. However, I have since also bought the larger 12"model (both are in metric). I find that the larger one is much better for cutting larger pieces of wood and the profile which the saw runs against isw bigger and therefore a little safer. However, if you only need one then get the smaller one.
Other things worth considering as follows:
1) appropriate PPE, such as, gloves, goggles and ear protectors (all essential)
2) portable RCD (essential with any power tool)
www.amazon.co.uk/gp/product/B000RZDNZM?pf_rd_r=RKKZP052QKP2GHMX9BH0&pf_rd_p=e632fea2-678f-4848-9a97-bcecda59cb4e
3) small selection of clamps for securing timber, etc.
4) Hand saw then you don;t want the faff of setting up your power tools for a smaller job
Hope above helps, Des
Hi Hassan, please accept my apologies for the delay in getting back to you. This is a really good question and I decided to do a video response to it. I've done the vid, just editing. Will let you know when I've uploaded. ATB, Des
@@21stcenturycaveman33 Hiya Des please don't be silly, I really appriciate that you got back to me! Thank you for your advise and information I really look forward to watching your new video on the subject too! Thank you very much, I really appriciate it!
Hi there. I've uploaded the following video response:
ruclips.net/video/rTS0Z9K8c28/видео.html
@@21stcenturycaveman33 Thank you so much, great video!
Absolutely amazing. I was admiring the hanging baskets for the first part of the video lol. You have done a fine job. Did the capping at the top stay in tact through all the seasons, as I know wood will expand/contract with the rise and fall in temperature. Also did you cut the all four pieces of the capping to the measurements you did in one go, or did you cut one piece, bolt it on, and then mark the second piece by placing it on the secured piece and so on... sorry if the question does not make sense. I am asking because I know some people swear by securing one piece down first, and then marking the second piece up off the first one. Cheers, Ali.
Hello there Ali and thanks for taking the time to watch this video and to comment - appreciated. Some very good questions indeed. (1) The capping - if I do this again I will attach a small batten to the underside of the capping to secure it better. Basically, if there is more timber to secure the capping to then there will be less chance of it warping. Plus, it will be a much stronger and more secure fit. (2) Your question makes perfect sense. I did NOT cut the capping all in one go. As I am not a professional joiner the build would not have been accurate enough to do this. Therefore, I cut each piece of capping separately to ensure the best fit. I have also since placed the legs on plastic blocks to keep them off the ground to prevent them rotting (plse see link below - I turned these cups upside down to rest legs on and they work great) . Another viewer has also suggested putting castors underneath to allow them to be easily manoeuvred which is a great idea. Best wishes, Des
www.wilko.com/en-uk/wilko-large-clear-castor-cup/p/0344740
@@21stcenturycaveman33 Thank you for taking the time to respond Des, much appreciated 🖒 Yes the capping makes sense, it's definitely very neat. I posted a question on a forum about whether dowling mitres together would be a good idea, and the experienced joiners advised adsolutely not to do this due to the wood expanding and contracting. Thanks again, and look forward to watching more of your videos. This is the third video of yours that has been so helpful. The others being the one on skimming, and lifting floor boards, if I remember correctly 🖒
Update: the first 1 minute got me seasick on your cam but the rest is great and like it
Thank you. Glad I didn;t make you puke! Des
the saw cuts a few mm so you shouldnt measure all cuts pre cut. otherwise great work!😀
Thanks for the tip! ATB, Des
Switch speed square to order side of board. Easier to hold when pushing the saw.
Good point mate. ATB, Des
Have you got any for sale
No. I'm so sorry but I haven't. Des
Good effort - well done sir!
If I might provide some constructive feedback - I have some sympathy with Troy Yarbrough's comment - the solution is a tripod which are cheap as chips to buy and will make future videos much more watchable. The other thing is if you make something like this that has a specific function - then show your viewers how you use it, i.e. it'd be great to see the planters planted up! ;-)
Hello there and thank you for your valuable feedback. I do actually have a couple of tripods (and use them believe it or not!) and I understand where you're coming from. Apologies if my amateur film making made it less enjoyable to watch. There are a couple of further vids on my channel showing them planted with flowers. Unfortunately, due to time constraints (and multiple projects running concurrently) it is not always possible to show the project completely finished, i.e. planted up in this case. Best wishes my friend, Des
Love this
💙ty
My pleasure. Des
Hy Mr caveman,
I'm after ur opinions on wood preserving brands. Iv made some large gates from redwood which I'm told is a softwood but a hard softwood but I stil have to treat it obviously. Many brands out like sikens, sadolin ect, some are crazy prices. One place wants £85 for a 5 litre tin. No way am I paying that.
I will probly burn with a blow torch like the Japanese the frame on the inside of gates as this is the best way to preserve wood and I think it looks amazing once rubbed down and clear coated but my Mrs doesn't like it so for the side which can be seen by the street I'm looking for very good stains. Any suggestions I'd appreciate
Hello Sir. Thank you for contacting me and expressing confidence in my opinions. Unfortunately, however, I am not an expert in this area and cannot offer any advice in this regard. If I were you I would check some of the forums and look at reviews to see what others have to say who may have more experience than myself. Sorry I can't help. ATB, Des
What size timber is the legs
Hi there. Approx 500mm in length. ATB, Des
@@21stcenturycaveman33 Hi Caveman, I work with troubled at risk youth, I currently have a young man who is interested in making a planter box as a apology gesture, can i trouble you for the measurements and types of timber for the entire project
@@21stcenturycaveman33 Apologies, I mean what type of timber are you using for the legs
@@kiriatangaroa9191 Hello there and apologies for the late reply (I thought I'd already responded and only just noticed I hadn't - sorry). Unfortunately, I don't have a full specification as this wasn't intended to be a tutorial - just an example of what can be achieved. However, I have included links to the materials used which I hope helps you. Your work must be very challenging and you have my utmost respect. Please see below:
www.wickes.co.uk/Wickes-Treated-Kiln-Dried-C16-Timber---45-x-70-x-2400-mm/p/166401
www.wickes.co.uk/Wickes-Premium-Deck-Board-28mm-x-140mm-x-2-4m/p/101000
www.screwfix.com/p/timbadeck-double-countersunk-carbon-steel-decking-screws-4-5-x-65mm-500-pack/73014
Please note that all of the above materials were purchased when on offer so as to reduce cost.
Kind regards, Des
Maybe consider buying a good chopsaw.. saves time,less effort 👍
I've since acquired a compound mitre saw which is definitely better - would save time and cuts will be more accurate. ATB, Des
@@21stcenturycaveman33 welcome to the 21s century 😃 good planters by the way 👍
where do i get plastic for in side box