Bait Pumping For Fresh Lugworm on a Sandbank that Only uncovers on Big Tides
HTML-код
- Опубликовано: 1 окт 2023
- Bait Pumping For Fresh Lugworm on a Sandbank that Only uncovers on Big Tides. I have been baiting digging at Pett level for some time now for me its a 26 mile round trip. So it was time to find some new ground to pump on searching along the coast line from Hastings to Bexhill we found a sand bank which is partially cut off by the tide and watching other bait diggers not attempting to cross it .We had to try it and boy was there lots of cast on this sandbank we pumped for 8 tides on the trot double tideing on the day of making the video i was knackered lol. We had amazing results getting great numbers on the worms and the sand was like butter could not ask for more
Спорт
I just started pumping just go out there have fun it not difficult really isn't
Hi that's great its not difficult just think of all the savings you make on fresh bait no more tackle shops good luck👍🎣
Exactly mate to many people glamour things save a fortune nothing like getting your own worm and catching
To be fair it's all down to you I watched how to make a pump on your video made one the same and love it
Hi Thanks if i can help some one my vid did its job great post thanks a lot😀
@@hastingsangler oh and the silicon washers spot on thanks you content will help many
Going to start pumping at 70 years and l find your channel brilliant, thanks for showing us newbies a way forward.
Hi thank you for taking the time to post if it helps some one get worms I'm happy happy pumping thanks again
Brilliant video mate. Thanks for sharing
Glad you enjoyed it good luck
Great video thanks for sharing it and your tips.
Thank You for watching 👍
Thanks for the reply man ! Yeah I’m going to keep going defo , I stay up in troon and I don’t see no one doing it here so I was wondering if it wasn’t a good beach for it but there are tons of casts but I did think they were a bit small but .... I’ll prob ask you more questions if that’s alright brother and nice to speak to you , I’d put a thumbs up but I’m no the best with this lol
your welcome any time mick
Damn you're good 😮
lol thanks alot i do enjoy it
@@hastingsangler you do tutorials ? I just seem to get tails mostly
I do have a video for beginners could help you if ulive local I would help u no problem
Hi I do have a video for begginer might help you souds like most people you are going to deep if your local to hasting I would meet u and give u a few tips
Spotted Mt.. Top job.. Eight tides on the trot with doubles lol.. Dedication,.. Mega worms.. . The go pro sounds like some evil demon sniffing out the worm blood.. I'm new to fishing n in Hastings so good to find your channel.. I was told bigger the cast bigger the worm.. lol.. Went digging for the First time this morning... Hard slog but fun... .. Every big cast tiny worm tiny cast massive big ass fatties... Huh !! Must get a bait pump, def gonna be easier.. 90 quid for stainless steel 22mill in Shop.. How much is it roughly, to build one like yours ?? Cheers.. Never used one can't wait... So satisfying digging out the worms this morning, at low tide... Use your own worms to go fishing High tide n going out... Filleting n cooking plaice for tea ... Yum Good day.... All learnt from you tube... Great channel.. They all know you in the shop...
Any info on how to fish over the rocky ground at rock-a-nor... Floats rig etc...cheers Mt..
Hi it sounds like you had a a good day down on sand i love it early morning sunrises and plentry of worms cant beat it lol the parts for the part are really cheap if built in copper the hardest part is making the shaft and threading the end. the lads down the tackle shop are a good bunch. As for fishing rock-a-nor if you go down on low tide your see theres a little sandy patch that runs through the middle not fished it in years tightlines👍👍👍
Hi thanks for the video, I'm in Whitstable and it seems most people dig the lug worms here just wondered if you know if you can pump them out here ?
Hi it all depends on how hard the sand is there that could be the reason why they dig with a spade or a fork we get a lot of diggers travel down to Dungeness ,Pett and Hastings good luck and thanks for posting
Nice vid mate
Hi Steve thank you for posting and watching hope you enjoyed it tight lines
Thank you for sharing your videos, I've never collected my own worms before but now I've made myself a 22mm copper pump I'm going to give it a go and save some money hopefully. Good luck and tight lines on your next session 👍🎣🎣🎣
Hi thank you for post i wish you good luck with your pump and plenty of lug tight lines and happy pumping
@@hastingsangler thank you I can't wait to try it out when I first made it I used the 22mm for the pump and 15mm for the plunger bit using a rawl bolt to put your seals on. But since I've seen your video making yours I've kept the 22mm but replaced the 15mm with 6mm steel rod, I've seen how other ppl use their pumps and they have great results after watching yourself pumping worms makes it look so easy thanks again for sharing 👍🎣🎣
@@michaelabbott6271 Hi Thank you very much for posting im glad that the video helped and i wish you the best of luck with your new pump dont give up tight lines and plenty of worms 😀😀
Watched the building, made one, caught a few,and getting older? No more digging.
Thanks for posting and watching my content stay safe
lol.. Hahaha I only dug today... Really enjoyed it, got fat worms... Fishing high tide.. Plaice for tea.. Aching everywhere... Must get pump... TC.Has any one got a pump for sale.. I am low income but spend on worms n rigs. So obviously it will save money quicker then you thunk..
Mint video, I noticed u don't lub ur pump much is that because the sand is soft
Hi no its because of the silicone seals i make sea water does a great job of lubeing the pump
@@hastingsangler aww rite thank u was just curious
Hi mate I have a 22mm bait pump with a 13mm lock but, can find a socket wide enough to fit down the hole, what tool do you use mate?
Hi first off i use a m10 nut because the thread is thinner but i have made some m8 threaded shafts with 13mmnuts i bought a thin walled 13 socket then fix it to screw driver socket handle fits in your pocket nicely hope this helps
How do you pump and hold the worms t the same time
Hi because i tend to put my bucket in 1 spot and then walk around looking for worms i carry about 25 worms in my fingers when pumping i tend to use the lower part of my palm not gripping the handle as you only need a light bit of pressure while pumping i hope this helps
You mentioned washing up liquid.How do you use that. Tim.Eastbourne.
Hi all i do is pour a little bit down the handle onto the shaft it then lubs the tube and seal try not to use to much
Can i ask do you find heavy rain has any affect on success when pumping?
Hi Barry ive been caught out a few time in heavy rain if you can still see where the casts are after being washed away i have found it to pump very well and the cast are soon to appear .Also i find a good breezy day helps
Can you use a pump for blow lug or does it rip them apart thanks.
Hi John ye you can use the same pump mate just different style👍
i just bought a pump ? is it anywhere along Hastings beach you get Lug as I am unsure of areas to go :) great video it helps loads
Hi the tide goes out further at the bathing pool or too the left of the pier but can be a bit stoney
@@hastingsangler thanks will check it out but best try on softer stuff before the stoney areas lol
hi if you can get to pett or winchelsea sand much better and goes out a long way
@@hastingsangler
Hi just a quick question lol 😂
Went down to Dungeness in front of the RNL station today, but only managed 4 worms ? And I chopped a few just ended up with the tail ? I have a 8” mark on my pump ? Does the weather make it any harder when it is raining and a bit of wind ?
Sorry for the big question 😁😂
Thanks
Jay
Hi i find it better when it's a bit windy rains not good it washes the casts away but this time of year bait pumping is very hard give it another month and the worms will be there in numbers good luck
So you dont pump over the other hole , i was always shown too. Ill give your way a go
Hi depends if your digging blow lug or black lug where i live is mostly black lugworm and you only get 1 cast but watching others on youtube they tend to be mostly blow lug with 2 holes
Ahhhh !!!! Now it makes sense.... Lol I been looking for the damm hole n there is none... Just the cast, now I know why... Cheers lads.. Big worms n tight lines.. Cool@@hastingsangler
@@jc301-OTECH Hi on our beaches you wont see blow holes like you do on other vids where they are getting blow lug. Here its just a cast and a case of put the pump in and the rest is luck or skill