2014 Chrysler 300 traction control light and abs light on

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • How to replace 2014 Chrysler 300 speed sensor

Комментарии • 63

  • @rvilly3480
    @rvilly3480 Год назад +3

    Right to the point, awesome. Just replaced mine with the help of this video. Saved me $300 going to a garage for a $25 part. Thank you

    • @JpGreen-wq9ws
      @JpGreen-wq9ws 10 месяцев назад

      Just to ask, my 2014 Chrysler 300 S just recently started this issue where out of nowhere it will decelerate and the slippery light will pop on.. changing the wheel speed sensor should help with that issue or was your issue different?

    • @rvilly3480
      @rvilly3480 10 месяцев назад +2

      @@JpGreen-wq9ws does the light only come on when it decelerates or is it always on

    • @JpGreen-wq9ws
      @JpGreen-wq9ws 10 месяцев назад +1

      @@rvilly3480 only when it decelerates. So, just to paint the picture. Sometimes after I make turn and try to accelerate, the car will decelerate and then slippery sign pops on.

  • @DJ_Blaker
    @DJ_Blaker 2 года назад +4

    Perfect little video, exactly what I needed! Thank you! Great tip with the wood screw too!

  • @sylmax7769
    @sylmax7769 Год назад +1

    Excellent video, excellent teaching, simple to understand

  • @randalllimburg6410
    @randalllimburg6410 3 года назад +6

    Simple and to the point. Good stuff.

  • @longshot82383
    @longshot82383  3 года назад +8

    IMPORTANT INFORMATION. my local Firestone shop told me it was the front right speed sensor when I got my oil changed. I believe there are 2-4 speed sensors. so you will have to find out what one is bad FIRST your local les schwab or Firestone should be able to tell you what sensor is bad ....Sorry for any confusion this video may have caused.😔

  • @calvinhoward2277
    @calvinhoward2277 Год назад +3

    Better be careful guys that you don't spend money on something you don't need to spend money on. I replaced all my speed sensors and the light still come on. I found out the lights mainly come on whenever I use my remote start. Whenever I started normally by giving the computer time to cycle before stepping on the pedal just started oh, it comes on fine with no lights. I think it's just a factory defect or something😂

  • @kingofjamrock
    @kingofjamrock 2 года назад +3

    Thank you Sir.. Just to the point.. 👍

  • @bigwillie2051
    @bigwillie2051 Год назад +1

    Thanks young fella! 💯

  • @AntonioTorres-jx1rm
    @AntonioTorres-jx1rm Год назад +1

    My 2011 300 3.6vv has all those lights and also the emergency brake light on as well,and it feel like its a little forse when driving it ,,was this something that you run in to as well??

    • @longshot82383
      @longshot82383  Год назад +2

      I didn't experience any sort of physical issue with the car I just had the lights on the dash but I would start with just replacing the speed sensor first and see if that clears up your issues. Good luck hope this video helps you!

  • @joegalvan87
    @joegalvan87 3 года назад +2

    Did your car make a clicking noise on shift knob console while turning at very low speed... my traction and abs light turned on same day I started noticing the clicking sound on console while turning right.

    • @longshot82383
      @longshot82383  3 года назад +1

      No sorry to hear that your having issues hopefully you can figure it out

  • @cliffphillips2370
    @cliffphillips2370 Год назад +1

    Great Video .Thank you.

  • @alexsamy8597
    @alexsamy8597 11 месяцев назад +1

    Perfect video

  • @mduncan5654
    @mduncan5654 3 года назад +2

    Big help thx man!

  • @colandrag
    @colandrag Год назад +1

    @lucky luke May I have the part number for the billstein struts...Did the struts and mopar springs give a harsh or smooth ride quality

    • @longshot82383
      @longshot82383  Год назад +2

      Sorry man just saw your comment! Unfortunately I don't have the car anymore but the billstien struts came off of a 2014 dodge challenger "blacktop edition" it lowered the car about 2" and the ride was a bit stiffer but handling was much improved through the corners. Long road trips weren't as pleasant as the soft stock suspension. Hope this helps...oh and the springs were( Mopar) springs from the same 2014 challenger

  • @precutziplock
    @precutziplock 3 года назад +3

    I don’t own a 300, but if I ever do... I’ll make sure to pick up a can of W D 40 😂

  • @Kay4sho_504
    @Kay4sho_504 2 года назад +1

    Thank u 🙏🏽 for this video

  • @alexsamy8597
    @alexsamy8597 11 месяцев назад +2

    Now I just need to erase the abs code trying with battery disconnect

  • @KamBackk
    @KamBackk 2 года назад +1

    How did you diagnose it and how did you know what wheel sensor it is?

    • @longshot82383
      @longshot82383  2 года назад +1

      I was told what one it was at firestone when I had my oil changed.
      Hope this video helps

  • @thebronzeage23
    @thebronzeage23 6 месяцев назад

    Bro i’ve placed my wheel bearing, speed sensor and just now replaced my tone ring and my lights are STILL on. I’m lost at this point.

  • @calvinhoward2277
    @calvinhoward2277 2 года назад

    Can someone tell me why the FWC, ABS and stability control lights keep coming on even after I've gotten the issue fixed

  • @Lagunas2391
    @Lagunas2391 3 года назад +1

    Whats was the message tou were getting before fixing this?

    • @longshot82383
      @longshot82383  3 года назад +1

      Traction control and abs light on

    • @ahmedalkhalaf3892
      @ahmedalkhalaf3892 3 года назад

      @@longshot82383 what about cruise control ?

    • @longshot82383
      @longshot82383  3 года назад

      Hmm honestly I can't remember if I got the cruise control light on with it also I wish I would have shown the lights on the dash in the video. Sorry man

    • @lokidoodles1572
      @lokidoodles1572 Год назад +1

      My abs and traction light comes on in my 2013 300 v6 but goes off, what could that be?

  • @darlenetownsend9723
    @darlenetownsend9723 3 года назад

    I have a 2014 Chrysler200 and the traction light came on and semi stalled/slowed my car down. How
    can I determine what caused this?

    • @longshot82383
      @longshot82383  3 года назад

      Take it to a shop and have them scan the codes for you hopefully something simple. Does it do it all the time ?

    • @richardplacarta5953
      @richardplacarta5953 3 года назад

      It could also be the throttle body you could just probably take it off and clean it really good they have video on you tube how to do it it will save a lot of money

    • @jg6255
      @jg6255 2 года назад

      Also could be the belt. That's what happened to my 2014 Chrysler 300 S. I replaced the belt and haven't had anymore issues.

  • @JBLove-rg9vc
    @JBLove-rg9vc Год назад

    What if the lights don’t turn off after changing all 4 sensors?

    • @longshot82383
      @longshot82383  Год назад +1

      You could try disconnecting the battery and reconnecting it. not sure why it would be doing that newer cars have alot of sensors on them. Might have to take it in to a shop. Hope you can figure it out sorry that this didn't fix it for you.

    • @JBLove-rg9vc
      @JBLove-rg9vc Год назад

      It was a very helpful video and thank you

  • @davidhaynes4311
    @davidhaynes4311 3 года назад

    Is it the same with the AWD 300c??

    • @longshot82383
      @longshot82383  3 года назад

      Should be the same not 100% sure though

  • @justinjackson3164
    @justinjackson3164 9 месяцев назад

    I have those lights on and tje cruise dont work

  • @ycfights3644
    @ycfights3644 2 года назад

    How much was the part?

    • @longshot82383
      @longshot82383  2 года назад

      I believe it was somewhere around 20-40 dollars

  • @amirmay1935
    @amirmay1935 3 года назад +1

    Is ur car lowered ?

    • @longshot82383
      @longshot82383  3 года назад

      Good eye! Yes I installed mopar springs and bilstein shocks off of my brother's 2014 challenger black top edition , it ended up lowering it about 2"

    • @amirmay1935
      @amirmay1935 3 года назад +1

      @@longshot82383 .. 🤣🤣 just noticed the yellow strut .. was hoping u showed the a full pic of the car .. quick question, how do determine which sensor is bad ?

    • @longshot82383
      @longshot82383  3 года назад +1

      @@amirmay1935 I can make a short video of the car here once we get some nice weather , as far as knowing what sensor it is my local Firestone told me about it when they did my oil change. I'm assuming they hooked it up to a computer to find out what one it was. Hope this helps.

    • @colandrag
      @colandrag Год назад +1

      ​@@longshot82383 May I have the part number for the billstein struts...Did the struts and mopar springs give a harsh or smooth ride quality

    • @longshot82383
      @longshot82383  Год назад +1

      @@colandrag unfortunately I don't have the part number.i got them off of a 2014 dodge challenger R/T black top edition. The ride quality was stiffer but the car handles alot better. Almost 0 body roll in corners.
      Long trips weren't as pleasant as the stock setup.

  • @phat5355
    @phat5355 3 года назад +1

    What is the part#?

    • @longshot82383
      @longshot82383  3 года назад +2

      ALS2248 ....I believe 🤔

    • @phat5355
      @phat5355 3 года назад +1

      @@longshot82383 thanks sir!

    • @phat5355
      @phat5355 3 года назад

      Hi Lucky Luke
      I did not know there are four sensors. 😵 I replaced the front passenger and lights still on. So, I guess the problem is one of the other three. Any tip to determine which is bad?

    • @longshot82383
      @longshot82383  3 года назад +1

      @@phat5355 oh jeez sorry ....I took my car for an oil change at my local Firestone and they told me it was the front right . I will specify in the comments so this doesn't happen to anyone else again sorry for your trouble.

    • @longshot82383
      @longshot82383  3 года назад

      @@phat5355 your local les schwab or auto zone should be able to tell you again sorry for the confusion