Throttle Body Cleaning on a 2005 Mazda MPV

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • Cleaning the throttle body on a 2005 Mazda MPV.
    I recommend doing all three of these:
    MAS cleaning: • Mass Air Flow (MAF) Se...
    Throttle body cleaning: • Throttle Body Cleaning...
    IAC cleaning: • Idle Air Control (IAC)...

Комментарии • 36

  • @shawnthomas6019
    @shawnthomas6019 11 лет назад +3

    dude! i really wanted you to know that yhis video help me so much and saved my family so much money i haf a mechanic look at my vechicle several times he changed coilpacks and has done other work to fix my problem but none of it worked, i watched your video and did what it said and it worked i have no more issues with my van thank you very much keep posting videos you do a great job

  • @paraviviane
    @paraviviane 10 лет назад +2

    Thank you for this video. It saved me hundreds of dollars!!!

  • @simonac688.
    @simonac688. 2 года назад +1

    Thanks for taking the time 👍

  • @StevenHancz
    @StevenHancz 11 лет назад +1

    Nice posting.
    It worked for me just as described.
    Thank you.

  • @brianley5223
    @brianley5223 5 лет назад +2

    Hi Kill-O-Byte. Any chance you can do an upstream O2 sensor change on this MPV please. Cheers

  • @segzy05
    @segzy05 4 года назад

    took out the throttle body and sprayed the inside of manifold and the throttle body, nothing bad happened, just that the jerky situation when going past 60km per hr slightly improved

    • @segzy05
      @segzy05 3 года назад

      @HAITI ZEN SOU ZEN error codes says lean condition. So the mech worked on the injectors, swapped some ignition coils and entire plugs. That solved it but did not save me money. After the work by the mech , i now have hard starting, changed fuel pump but no improvement . the error code is bank 1 oxygen sensor which will not cause hard starting. Just 4 weeks ago

  • @simonac688.
    @simonac688. 2 года назад

    That hose is realy not easy to reach the filter its a project in its self 😂
    but your videos are of great help cause now mecanics think there brain surgeons 😜
    thank you so much 👍

  • @Killobyte
    @Killobyte  11 лет назад

    Glad it was helpful, thanks.

  • @MulengaNsofwa-cp5zo
    @MulengaNsofwa-cp5zo 2 месяца назад

    Hi sir, I have a MPV Mazda 2001 with a rough idle

  • @waynebernal3913
    @waynebernal3913 9 лет назад

    Sir can u please let me know where spark plus 3 is at on a Mazda MPV 2003 ??? Is it a good idea to change all of the parts that connect the to spark plugs

  • @zoefaith120
    @zoefaith120 3 года назад

    What is the sensor on top of the air filter housing?

  • @zoefaith120
    @zoefaith120 3 года назад

    Can you clean that sensor?

  • @mosheametay4009
    @mosheametay4009 2 года назад

    Hi I have mpv 2005 and what happens when the vehicle is on in neutral The columns go high alone and go down and go up again Do you know this problem? Clean the throttle house Replace plugs and coils In a computer test only a faulty oxygen sensor appears sitting on the exhaust. Could it be related?

    • @mosheametay4009
      @mosheametay4009 2 года назад

      It's been a week since the vehicle was in the garage and you can't find the problem of the columns climbing alone

  • @rfailing1
    @rfailing1 9 лет назад

    I live in NY - winter is here and today I pushed my gas pedal to the floor to go around someone annoying. The throttle stuck wide open. I hit the brake hard and it released the throttle. Was not using cruise control. Went around a corner and I floored it again and it stuck wide open again. Do you think that's the result of a dirty throttle body?

    • @Killobyte
      @Killobyte  9 лет назад

      It could be a sticking throttle body. The things I would check include:
      Throttle body - manually open the throttle body to see if it is smooth and check if it closes freely at wide open. I'd clean it also while you have access.
      Linkage - check the linkage that works the throttle body. Verify that it's not binding. I'd spray some thin lubricant on it.
      Throttle cable - check the condition of the throttle cable. Verify that it isn't frayed and that it moves freely when at full opened position.
      Gas pedal - check to be sure it moves freely and isn't getting caught on something like a floor mat.
      Good luck and let us know what you find.

    • @rfailing1
      @rfailing1 9 лет назад

      Kill-O-Byte
      Thanks for your reply. I will do that at next day in 30s. That will be warm enough to work in a T shirt. Just kidding! Good video and I appreciate RUclips and all the things we can find here. I did a search on sticking throttle Mazda MVP and yours came up. I did a video on YT also, showing our long hair chihuahua after open heart surgery - 2.5# dog! Look up Gracie PDA and watch for 3 a 3 min story. I will get back to you when I do the cleaning.

  • @mrspogadaeus
    @mrspogadaeus 8 лет назад

    Is this the same 2005 you changed the brake pads and changed sparks plugs and coils on a few months back?

  • @NormaLopez-um6tt
    @NormaLopez-um6tt 8 лет назад

    I have a 2006 mazda mpv and have a problem with some rattling in the passenger side where the air bag is, can you give me some pointers to what to look for.

  • @erikkrumm9433
    @erikkrumm9433 5 лет назад

    I have a racing idle. It sits at 2500 or so idling. In drive about 1500. It accelerates without pressing the pedal. Trying to find a solution.

  • @MaynardOwns
    @MaynardOwns 4 года назад

    What’s the chain under where you put oil

  • @vickyjohnson301
    @vickyjohnson301 10 лет назад

    the nut you removed really was unnecessary it was really easy just had to pull the whole thing up no need to remove the nut

  • @BRUCECRUZ
    @BRUCECRUZ 8 лет назад

    Hi, I have a 2005 MPV and last night on my way to work sitting at the stop light while the van was running normally idling it just decided to shut off. No choking or anything like that. Any idea to help me pinpoint it?

    • @Killobyte
      @Killobyte  8 лет назад

      Are there any codes? Did it re-start?

    • @BRUCECRUZ
      @BRUCECRUZ 8 лет назад

      nope

    • @BRUCECRUZ
      @BRUCECRUZ 8 лет назад

      I've replaced the fuel pump relay, fuel filter, and fuel pump and still nothing. I turn the key to see if I could hear a buzz from the pump but nothing. Any solution before I take it to the shop? Please help.

  • @romig8932
    @romig8932 9 лет назад

    can i use mas cleaner

    • @andrewx7806
      @andrewx7806 7 лет назад

      Good question. I googled it and got an answer: Yes you can. But don't do it the other way around; don't use throttle cleaner on the mass flow sensor.