I have not been able to try it yet. My daughter-in law is going to help me. I will let you know, and thanks for your response. A person that cares enough to contact you, your a good man! Thanks
Thank you so much! I have most of the mighty hoops, and they are terrific. Sometimes, most of the time, my machines will always say “go to a larger hoop” when the pattern will be way smaller than the hoop. I am going to walk through this method and hopefully I can not get so frustrated!
I have done all the calibrations, twice. My problem is I have the factory cap frame on and keep getting a AREA OVER message. Design is a 2"x2" that Ive sewn out several times on caps before. I have not sewn a cap in about 4 months. I was gone but did sew some towels last week. The screen cap frame is light, not dark as needed., It is centered and did not flip automatically either. This is a BabyLock Embroidery Professional 6 needle floppy disk machine. It had very low stitch count when I bought it this past year. Sews beautiful. Please tell me what to do.
I recently purchased a HoopTech Gen2 for my Babylock Enterprise. I calibrated the regular hoops, took out the magnet thing and replaced it with the Override Bracket. Everything looks good, except when I do the trial or walk around, it works once, I move the sewing field to be more centered and the frame goes all the way to the right, running over the metal hat frame. What am I doing wrong? Please help!
Hi, we recommend contacting our Product Support team if you are experiencing issues with your Alliance screen. Here is a link to send the team a message - www.babylock.com/support/contact.
I have a Brother PR 1050X. I noticed that your demo for the Baby Lock matches the same 'look' of my PR 1050X. At the beginning you mentioned hoops that are not made by Baby Lock and the machine may not recognize them. I have a 8x13 magnetic hoop along with a few other smaller magnetic hoops that came with the machine when I bought it 2nd hand a couple weeks ago. Twice now, I have tried to use the 8x13 magnetic hoop and after a minute or so, into the stitch out, the machine will start clicking and then it jumps out of registration. I have had no problems yet with the smaller hoops. Does this problem with the 8x13 magnetic hoop mean that it is too heavy for the A frame? I tried attaching it to the B frame but it doesn't fit. I have also tried using the table that attaches to the machine but I can't tell that it helps any. What can I do in order to be able to use the magnetic hoop (8x13)?
As the BMP9 is a retired model, we do not have a similar video. For manuals and compatible accessories, check out: babylock.com/accessories/multi-needle-embroidery/embroidery-professional-plus-previous-model
Hi, we recommend reaching out to our Product Support team at 800-313-4110 or fill out this contact us form for additional assistance: babylock.com/support/contact
the thumb screws are specific to the machine. if you have multiple machines its possible these screws got mixed up. even if the threads match the difference in length could cause a problem. its also possible that the screw hasn't been properly secured. if its been crossthreaded the screw wont be able to secure flush. just shooting ideas to a super old post.
Hi Cathy! The process for the Endurance II is a little bit different. Feel free to reach out to our awesome Product Support staff and they can walk you through the steps! www.babylock.com/support/contact
WHO DISLIKED THIS VIDEO!? Seriously, weird.. Anyway, thank you SO MUCH for making this tutorial. I just got a Brother 10 needle, I'm completely new to the trade and lost.
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
WOW! I was having trouble with my mighty hoops (until I watched ths video). You are very clear to understand. THANK YOU.
I have not been able to try it yet. My daughter-in law is going to help me. I will let you know, and thanks for your response. A person that cares enough to contact you, your a good man! Thanks
Thank you so much! I have most of the mighty hoops, and they are terrific. Sometimes, most of the time, my machines will always say “go to a larger hoop” when the pattern will be way smaller than the hoop. I am going to walk through this method and hopefully I can not get so frustrated!
Hi Callie! Thank you for taking the time to comment! How did it go?
I have done all the calibrations, twice. My problem is I have the factory cap frame on and keep getting a AREA OVER message. Design is a 2"x2" that Ive sewn out several times on caps before. I have not sewn a cap in about 4 months. I was gone but did sew some towels last week. The screen cap frame is light, not dark as needed., It is centered and did not flip automatically either. This is a BabyLock Embroidery Professional 6 needle floppy disk machine. It had very low stitch count when I bought it this past year. Sews beautiful. Please tell me what to do.
I hope I didn't already post but Awesome! Great teacher, great information!
Doug are you still answering questions on this page? Need help with my Cap driver . I have a Babylock Enterprise. Thank you Kay
Please reach out to our consumer support hotline: 1-800-313-4110 or email at productsupport@babylock.com.
Thankyou so much! This video saved us from alot of trouble.
How do you calibrate the hat hoop?
THANK YOU times 100 million!!!!!!! 🤗
Great information
I recently purchased a HoopTech Gen2 for my Babylock Enterprise. I calibrated the regular hoops, took out the magnet thing and replaced it with the Override Bracket. Everything looks good, except when I do the trial or walk around, it works once, I move the sewing field to be more centered and the frame goes all the way to the right, running over the metal hat frame. What am I doing wrong? Please help!
Enormously helpful!!!
Thank you for the great tips.
How can you program a magnetic hoop? I think I have a monster hoop but it does not appear so big.
Hi! What buttons to push for the Alliance to calibrate?
Hi, we recommend contacting our Product Support team if you are experiencing issues with your Alliance screen. Here is a link to send the team a message - www.babylock.com/support/contact.
I have a Brother PR 1050X. I noticed that your demo for the Baby Lock matches the same 'look' of my PR 1050X. At the beginning you mentioned hoops that are not made by Baby Lock and the machine may not recognize them. I have a 8x13 magnetic hoop along with a few other smaller magnetic hoops that came with the machine when I bought it 2nd hand a couple weeks ago. Twice now, I have tried to use the 8x13 magnetic hoop and after a minute or so, into the stitch out, the machine will start clicking and then it jumps out of registration. I have had no problems yet with the smaller hoops. Does this problem with the 8x13 magnetic hoop mean that it is too heavy for the A frame? I tried attaching it to the B frame but it doesn't fit. I have also tried using the table that attaches to the machine but I can't tell that it helps any. What can I do in order to be able to use the magnetic hoop (8x13)?
I have a baby lock 6 needle BMP9. I don’t have the same screen. Do you have one for an older 6 needle?
As the BMP9 is a retired model, we do not have a similar video. For manuals and compatible accessories, check out: babylock.com/accessories/multi-needle-embroidery/embroidery-professional-plus-previous-model
When calibrating, what is the “E”? I understand “A” and “B” but what is “E” for?
Brilliant video, thank you
My valiant won’t read my hat hoop. Is there another way to recalibrate it?
Hi, we recommend reaching out to our Product Support team at 800-313-4110 or fill out this contact us form for additional assistance: babylock.com/support/contact
Is there a video of why my tighten down screw hits the machine on my largest hoop??
Marlynda Schibley did you ever get an answer? Mine is doing the same thing!
Would like to know that too
@@vainsareblue no never got an answer
the thumb screws are specific to the machine. if you have multiple machines its possible these screws got mixed up. even if the threads match the difference in length could cause a problem. its also possible that the screw hasn't been properly secured. if its been crossthreaded the screw wont be able to secure flush. just shooting ideas to a super old post.
will this work for the endurance ll ?
Hi Cathy! The process for the Endurance II is a little bit different. Feel free to reach out to our awesome Product Support staff and they can walk you through the steps! www.babylock.com/support/contact
WHO DISLIKED THIS VIDEO!? Seriously, weird.. Anyway, thank you SO MUCH for making this tutorial. I just got a Brother 10 needle, I'm completely new to the trade and lost.