Checking and Cleaning Motorcycle/Car fuel injector without any special tool..simplest method ever!!!
HTML-код
- Опубликовано: 2 окт 2016
- In this video I explained working of an ideal fuel injector and how to check and clean it using a throttle body cleaner...Karizma zmr, Honda cbr250 and KTM duke 200 and 390 has probably same structure of fuel injector and can be checked and cleaned in same manner!!!
Follow me on Instagram= / tony.blaze009
Email:- powerpulse.remapping@gmail.com 
Авто/Мото
I suggest using a 9V battery instead of a 12-14V and also to use a “tapping” method instead of keeping constant voltage to the fuel injector. The solenoid inside can burn out if you “hold” it open. Great video nonetheless
Great this helped alot :), although award for the most abrupt ending.
really simple to understand and will help me to diagnose my non start issue... great useful video!
This is awesome! This may save me from having to remove the fuel rails and injectors (I know all 4 seem to be firing, but seem to be possibly working at reduced capacity). I have 2 sets of injectors, too (CBR600RR). Thanks for doing this video!
You could have sprayed with the potential removed to check that it is closing well. Good demo. Keep it up
Good, but you should use reduced voltage, like 9v or less. The injector solenoid is not designed to be held open, rather it's made to pulse on and off, and the wiring of the coil can be damaged with full 12v
Well at high RPMs injector is practically open all the time so no worry..!!
@@powerpulse.motorsports
At high rpm, the injector should never reach more than 90% duty cycle, and, it also has a large amount of cool fuel flowing through it to cool it down.
The preferred voltage for cleaning is not more than 9v.
I have seen several injectors damaged by using this 12v method.
Thanks brother. Essential information.
Good one. Very helpful. Thank you brother.
Great, Simple and clear explanation
So easy. Nice work!
Good demonstration.
Thanks for info helpful video!
Nice video bro👍
You so cool explaining all toughy toughy shit. Thank you
thanks for video bro
Can we connect battery Negative and positive charge terminals to injector randomly. Does injector will work or it blow off ?? Please do reply
My zmr's fuel injector body has a crack . Do I have to change the fuel injector or just the body. Pls reply
Mine wont keep running. Need to try this. Thanks.
Nice video 👍
Nice one
Nice video! Do you recommend any cleaning solution that we can mix with petrol ? I heard someone saying liqui Moli can be used with petrol...
How you buy that
@@kirbycelestine9312 with money
Thanks for that
Sir mere pass herohonda Karizma zmr h 2011 model meri bike mein missing problem aa rhi hai or agar headlight on karne se bahut jayada missing karti h bike or agar speed chalao toh bike normal chalti h pr agar pickup Dena ho speed up karne ke liye to bike missing Karti h or bike ka jo rpm mitor h vo bike start hone ke bad Kam jyada hote rehta h or kabhi kabhi engine start karne mein bhi problem aa rhi h please koi solution de bahut pareshan ho gya hu sir
How much current for the selenoid to work?
very nice.
Very finest 👍👍
Will this trick work on 17 camaro ss. Direct injection injectors ?
Buddy what you used for electric supply? Is this bike battery connected over there or what else ..i doubt there might be some limited current supply is required so just wanted to know what you did ? Where this wires were connected
And thank you soo much you are helpfull
😊
A laptop battery supply was used to activate injector..!!
@@powerpulse.motorsports isnt laptop battery ranges 11 to 15v maybe? What is the voltage on your Injector?
Can you please tell me what other type of battery would work? Like a 9volt or my motorcycle battery?
A motorcycle battery wud do just fine...I used 12v DC adapter from modem..!!
How will I now the polarity of both terminal before I do this. In event of wrong polarity what will happen to the injector?
nice
Owesome
Can you please show how to remove Injector from Karizma zmr Bike? 🤔
very nice
How to know (+, -) in injector clip?
thanks
I Dont have a choke cleaner where do i find it
can you plzz help me i have buy injector holder karizma zmr 2011 model
Lovely
My cbr 150 is giving very low milegae of 20 kmpl what should i do
how would you flush the injector to remove the residual the carb cleaning solution after youve finished cleaning? Is there a way to flush the system with petrol without using an aerosol can?
Alvin Sidhu no need to remove it as it is volatile and even if it stays in there it burns without any residue so it is safe
Hello Sir Namesty ! Every Engineer Doing this type of Activity ! My Zmr bike Fuel Pump Is Also Burnout ! And Hero company Say 14500 Rs Charging for Me This Dame fuel Pump ! Sir I am Also A Automobile Technician !
thakns
nic trick
From where we can get this connecting manifold ? Please share the link
If your bike doesn't have this manifold use following technique..!!
ruclips.net/video/uERM5W0BOqY/видео.html
Bhai fuel injection cleaning kitne time me karana chahiye
I changed a new injector but it starts and after 5 seconds it just stops turn off the ignition off and turn it on again it starts and stops after 5 seconds again what could be the problem 🙏
Nice
How did yiu remove the hard rubber pipe from the fuel injector?
It has locks, Just press with two fingers while taking it out slowly. Do not pull hard.
Which Is got For Maintaince Fi or carburetor bike
Does Fi repair is Costly
Fuel Injection maintenance is low...Fuel injectors and throttle body has to be cleaned after 20000kms whereas carb has to be cleaned @ 3000kms interval...
But injection system repair is high...cuz Programmed injection system has Sensors,Fuel pump,Ecu and fuel injector...So components are costly...But maintenance is almost zero..!!!
Please explain how to remove injector line honda little cub efi bike
I have Honda CB unicorn 150cc can I use fuel injector in by bike..??
U need fuel pump, fuel injector, MAF sensor, Air intake temp sensor, Throttle plate angle sensor, Oil temp sensor, O2 sensor, ECU, ECU remapping tool, throttle body for installing a Fuel injection system....So I suggest keep it carbureted..!!!!
Crank Position sensor is already in der which controls ignition and injection timing while rest of the sensors control the injection volume to keep Air/Fuel ratio 14.7:1...!!!
Can this fuel injectors give constant spray of fuel for a minute or more
Yes..!!
how long time injector can keep charged open before coil burn ?
There's no time limitation I guess...Cuz at high RPMs it's practically always open!!
really, i was listen, somebody saying, the injector goes mute. but i think was a prank for me
please tell me this item price
Sir fuel injector ki sahi ret kya hai please reply 🙏🙏
Heard that for KTM Duke it should be 9v. What happens if I clean using 12v dc?
stick to the safe side and just use 9V instead, and hook your wires up to a button switch so the injector isn't receiving voltage constantly to prevent damage. FIs are relatively cheap and easy to replace but I'd rather not replace it if its working in the first place.
Bhai fuel vale me current nahi aa raha hai kya problem hoga
Enzektr germ horha he tho kya vo khrab he kya petrol nhi dereha he
i need a injector holder
How many voltages can be used bro
I have honda wave 125 I.
Pls reply..
6-9v
@@powerpulse.motorsports
Thanks 😍
Make video how to.install it
Wiring sahi hai
Which ap btry
When to clean fuel injector of bike?
10000KMS Interval.>!!
Sir meri bike v chalu ne ho re h ky problum ho sakta h batiye mere pass cbr 250r h
Cud be a bad fuel pump or injector or just a bad pump relay...Also make sure to check your spark plug and all the fuses!!
Spark plug chng krnapadega ky sir
Engin problum thodi na h sir
Your voice similar to english maker
My bike Karizma ZMR starting problem
The Karizma ZMR is your problem.
what motorcycle is this from please
CBR 600rr
Fuel injector cleaner chemical ka link to diya nahi
Why not test it connected to the bike
Plusar 220 fi, fuel injection issue. Reply with your contact.
Sir what problem do you have with your fuel injector
can wd 40 be used for it?
Umm WD 40 is more like a lubricant...It won't clean as it doesn't have much pressure!!
My injector is not working as Petrol is not coming out what should I do
Genuine NEW motorcycle motor fuel injector yellow color 12 holes senin for CBR600RA CBR600RR CBR600 16450-MFJ-D01
s.aliexpress.com/NBZzMzMJ?fromSns=Copy to Clipboard
Clean it and it will start working
Nrsonkar Sonkar replaced
Now again bike is not starting its cranking but not starting even rpm is not working while i press the self
When did you change the fuel inje?
Price pleasure+ bs6 scooty
Pls sir
Battery se - + nahi hota Hai
Bhai kitne this
Sir plzz talk hindi
सर हिंदी में जानकारी चाहिए
so why this video in my recomendation.. so wierd. so so wierd
Aapke pas injectar mile ga
Ji m sale karta hu injector price 3500 h mera no h 8510852697
You speak to fast
dave mark dulong you listen too slow.
very nice