1982 Chevy P30 Step Van Grumman Olson 4.8L 292 Inline 6
HTML-код
- Опубликовано: 13 сен 2024
- 1982 Chevy P30 Step Van
Grumman Olson
4.8L 292 Inline 6
This is my most recent project purchase. I plan on fixing this truck up to serve as an all-around utility vehicle. Work truck, camper, mover, hauler, you name it. 
Развлечения
Seven Wanders sent me over. Excited to see how it turns out. :-)
I blew the engine on mine, and now im working to revive my ¨82P30¨ with a classic 350 and TH400. installed a woodstove and propane furnace for ski trips.
I'am Your Newest Subscriber Great Videos
I bought a 73 Olson/Grumman inline 250ci 6cyl, 4spd. 1ton step van, aluminum body, power brakes, MANUAL STEERING, totally f--ked, can bearly turn the steering wheel rolling, sitting still turning the steering wheel bends the steering extension shaft, so I spent 3 months going to the bone yard and auto parts store to finally get everything to make it POWER STEERING, I'm a welder so I made the brackets to hold the p/s pump to the engine, plus lots of trial and error, but now it turns with 1 FINGER. I guess the guys that drove these must sleep well a night. Parts -. p/s pump 70's gm. P/s gear box 3/4 or 1ton gmc. truck..pulley from the same car u get the pump from. Test alignment with a straight edge. Use a wide V belt so it won't slip. William
awesome. good tips. i put a wider belt on and it runs fine. its a laborious project for sure. its super cold here right now so ill continue working on it in the spring. the good news is she fires up in the 7'F weather.. sluggish but she fires up.
Where do you purchase you’re parts for you’re 73 William Ambrogio?
@@demargrant6179 MillSupply.com has lots of parts for Step Vans.
Nice! Any updates? Hopefully you kept that motor in it... Just picked up a 93 G-O 16 footer bumper to bumper Ford straight 6, AT, Power steering, etc.. Can't wait to deck it out!
Thanks for watching. Yes I had the motor professionally rebuilt by the NAPA engine shop near me. They did an excellent job. Check out my channel for the videos on that any more updates-subscribe if you'd like. Good luck with your build, have fun, post videos.
I like this. Where could I get parts for mine? I have an old Grumman-Olsen myself.
legal, só faltou ligar e acelerar
How is that treating you? Was just looking at one of these. Same year, but with 6.2 litre. Know of any problems associated with these. Also looked at an 87 but it had some rust and steering issues.
Seven Wanders sent me too, looking for a 292 myself, but for my K5 Blazer, my step van has a 6.5L diesel n it, she is 18ft though
So I think you said you put 235 85 16’s on. Do they rub together in the rear? I’m trying to get a straight answer from the internet as to required space between the two tires for safety. Thanks.
Sweet
The 292 has more pulling torque than a v 8
What oil do you use for that engine ? And how much???
How did this go? Im looking at a 1984 chevy im guessing these didnt come with power steering. The truck has been sitting for over 20years idk what im getting myself into as far as to even get it to crank on me probably will need to flush everything for starters, new batteries, fresh gas lol for starters. Any tips would be great. Is the 4x4 crucial for these trucks as the one im looking at is not 4x4. Thanks for the help.
They have power steering I have a 81 it's clean and the wheel is smooth as butter it's unbelievable tho my park brake no longer works I got it like that but man that i6 power plant in these Grumman trucks by GM are built to last
I just had my coil go out changed it but I also changed the ignition module while I was in the distributer and it fixed my no spark problem
Sal Conigliaro, do you have a relative whom was a teacher in the Connecticut School system back in the 70's and maybe longer? I believe she was the cousin of the Red Sox players Billy and Tony though her last name was different.
Dude did you change out the engine
How long is the box?
10’ to the back of the driver seat.
hey - youre moving that camera so fast is makin me crosseyed. gotta turn you off.
Sorry, Im working on the stabilization.. thanks for watching!
add a turbo to the 6 n you should get more power but do resreach before you take any advice better prepaired thn sorry right ?.. go purple on the paint .....
Did you buy the new engine and wat engine was it
C3llular Films thanks for watching! I did not buy a new motor. I pulled the Chevy 292 inline 6 out, sent it off to NAPA for a rebuild to .060 over and reinstalled it. She runs nice now.
C Trybus thanks for putting the video man hope the truck is working on top condition. And thanks for the reply much appreciated I’ll tune in for any future projects. I’m gonna see about doing something like that in my step van it’s similar to yours 💯💯💯👌
anyone here know where i can find parts for this truck?
why window chain system broke
Ever find parts for this?
4bt swap