So many tables to choose from. This table seems the most practical for install/use/price. I also like that it goes over the factory plastic. Anyone have any experience with this table?
They dont cuz they know its worthless for the JKs. The paper instructions that come with the table show the install in a JK but the final pics are of a JL. Maybe these fuckers thought we wouldn’t catch that.
Darn, I bought the Mopar table when I bought my Jeep new and it's nowhere as well thought as this one is. I will say the little table has turned out to be handy though.
I could forgive the misleading video title ("...install for ...JK.."), if there was another install video for the 2007-18 JK, but it only shows JL install, and no hint of another video. The printed manual is fuzzy, to say the least. ("find the middle point of the flat part"? - come on, do better) Would love to see this in aluminum instead of steel.
I 3-D printed hinges, bought a piece of threaded rod and used some scrap plywood and it literally cost me 5 bucks. I’ve been using it for about five years now. $200 for a table? Not for me thanks.
@@FREEtupacNOW still could have a swing tire carrier , but a drop gate , and wish they would would make the soft to where you could slide a cooler out without having to unzip the back. Just my opinion
@@Kscottfamily9 how is that more convenient than just a swing gate? Plus a drop down you have to reach over to access the trunk. I think they made the right call.
@Rocket Willy , to me it seems more convenient, I hate when you are on a slight slope or something and the door keeps swinging back hitting you or in the way. Or you can just slide a cooler out then just slide it back in. They should make them like some trucks have them now , either swing out or drop.
So I was wondering why you dont have a video for this table install in a JK, come to realize that its cuz ur paper instructions with the table are WORTHLESS. They show install pics in a JK but the final pics are of a JL. What a waste of money/time.
![Yeat & Quavo - 5BRAZY [Official Music Video]](http://i.ytimg.com/vi/4XxnTAwyxus/mqdefault.jpg)
omg look at all those laser-cut logos. gosh i just love laser-cut logos
Just got mine! And it rattles like crazy when driving.
So many tables to choose from. This table seems the most practical for install/use/price. I also like that it goes over the factory plastic.
Anyone have any experience with this table?
These things rattle like crazy, even with the rubber bumpers in place and all the hardware tight. Really regret installing this on our JL.
I’ve heard they do rattle. Do you have this specific one and if so, does it rattle?
I wonder if dynamat would stop the rattle.
Is there a video on installing this on the JKU?
They dont cuz they know its worthless for the JKs. The paper instructions that come with the table show the install in a JK but the final pics are of a JL. Maybe these fuckers thought we wouldn’t catch that.
I’m glad that y’all are installing mods on 4xes :)
Can I have the freedom panels in their bag, lying flat in the back, and still close the gate?
Darn, I bought the Mopar table when I bought my Jeep new and it's nowhere as well thought as this one is. I will say the little table has turned out to be handy though.
When is Product going to back In Stock?
Looks great! Are these the same mounting holes as the Mopar table? For Jeep JL.
Yes, they use the same threaded bosses already in the tailgate.
@@Quadratec I'm looking for the spacers... I found a way to lose mine. Do you know what the OD/ID is? I can figure it out from there.
Nothing to say about installing on a JK?
Install tutorial video would be nice
Can you remove the bottom shelf if needed?
I could forgive the misleading video title ("...install for ...JK.."), if there was another install video for the 2007-18 JK, but it only shows JL install, and no hint of another video. The printed manual is fuzzy, to say the least. ("find the middle point of the flat part"? - come on, do better)
Would love to see this in aluminum instead of steel.
Grade five and up hard wear …pretty please ?
Waterproof?
I still like the rock slider engineering tailgate table more.
Here ya go! www.quadratec.com/p/rock-slide-engineering/tailgate-table-wrangler-jk-jl-AC-TB-200?
I already have it. Purchased it last summer.
Rattling?
I 3-D printed hinges, bought a piece of threaded rod and used some scrap plywood and it literally cost me 5 bucks. I’ve been using it for about five years now. $200 for a table? Not for me thanks.
Lol. I'm sure those 3d printed hinges are so durable.
You printed the 3D hinges at home?
Wouldn't have to buy one if jeep would go back to the drop down tailgate on the wrangler. I literally hate the swing gate 🤬🤬🤬
I imagine it’s the desire to keep the spare tire mounted in the traditional Jeep spot ?
@@FREEtupacNOW still could have a swing tire carrier , but a drop gate , and wish they would would make the soft to where you could slide a cooler out without having to unzip the back. Just my opinion
@@Kscottfamily9 how is that more convenient than just a swing gate? Plus a drop down you have to reach over to access the trunk. I think they made the right call.
@Rocket Willy , to me it seems more convenient, I hate when you are on a slight slope or something and the door keeps swinging back hitting you or in the way. Or you can just slide a cooler out then just slide it back in. They should make them like some trucks have them now , either swing out or drop.
So I was wondering why you dont have a video for this table install in a JK, come to realize that its cuz ur paper instructions with the table are WORTHLESS. They show install pics in a JK but the final pics are of a JL. What a waste of money/time.