How To Wire Auxiliary Lights To JL Wrangler's Factory Switch Panel
HTML-код
- Опубликовано: 12 сен 2018
- In this video Ryan shows you exactly how to wire up auxiliary lights to your Jeep JL's Factory Switch panel.
Check out Parts for your JL Right here: www.extremeterrain.com/thrott...
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
SUBSCRIBE at / extremeterrainvideos
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/+extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterrain.com - Авто/Мото
I'll hand it to Jeep, that's a pretty sweet setup for a fancy factory option.
This is one of my favourite features of the JL. Simple, but very effective
I've been waiting for a video explanation on RUclips from a reputable source - Thanks so much for finally doing all of this!!!
Love the video. Exactly what I’m looking for. Easy and straightforward instructions. Everything makes sense.
"Make sure you have a pair of wire strippers so you can completely ignore them and use your side cutters to strip the wires" 😂
lol I was thinking the same thing.
I thought maybe he forgot to use them when he did the 1st wire, but after the 2nd wire was stripped......it was obviously standard operating procedure to ignore the strippers :P
didnt even need them to begin with
Hilarious! At least he used the crimper portion instead of reaching for the vice grips! LOL! Great video though!
As a Navy Aviation Electrician, I had a hard time watching this.
Hands down the most detailed and useful instruction video on this topic. Great walkthrough!
Glad you enjoyed it! Thanks for watching!!
Glad I found this channel. Very thorough and professional. Thank you!
Nice. I just hooked up my hood-mounted led bar following your instructions. Works great. I set it up for battery power so we can use it as a camp set-up light without having any other part of the car on.
Excellent video. Nice detailed, you hit all the right points and even discussed how go through the Settings in Jeep's infotainment system to program the setup for the lights. Thanks for this video, super helpful.
Great video! Helped me wire up some front auxiliary fogs for snowy weather. Thanks for your tutorials!
Wow! That is freaking cool and so easy to set up. Thanks!
Awesome. Thanks for this follow up video.
Aux 3: Dash Cam, Aux 4: CB radio, Aux 1: Light bar. With this video, I have found the harnest ( cables). In my German car, inside there are 6 cables. But I found the right cables. Thanks for this video. It was very helpfull for me. Sorry for my bad English.
Great video, very informative! Keep up the good work!
Thanks! I added front and rear leds with the new barricade bumpers and these options work great as I normally use them as accessory lighting as well as trail lights. You also get a heavier rear axle with the towing package.
This is so awesome! I just bought a new Rubicon, but came with halo lights, but I plan to put in LED lights with a DRL Ring, but I need to be able to completely turn off the white LED lights when I go on my astronomy outings so that the white LEDs don't affect others eye in complete darkness, so this is such a great setup.
Great informative video thank you
Very cool. I just ordered my first Jeep, a 2021 JL Jeep Wrangler Rubicon Unlimited and ordered it with this option. I plan on running a Baja Designs OnyX-6 50” LED Light Bar up top, side lights and rear off road lights too, in addition to a front winch and another OnyX-6 LED Light Bar on the front bumper but one that is slightly shorter than the 50” one mounted to the roof. At least 4 things can be wired into those switches. Excellent design and idea from Jeep.
Great vids continue youre good job buddy
Great video. After watching I hooked up my rock lights that have been installed for 6 months, but not connected. Thanks, you made it super easy!.
Great to hear it helped out! Thanks for watching! -Zach
Finally someone spoke up!!
Great vid!! The aux switch connections and uconnect setup well explained
Just got my JL and this video was so helpful!
Hell yes girl! Get it!
Man this video was very useful, your voice is calming lol.
Great Video! I was able to connect my light bar by myself.
You guys have the best videos for this. Awesome work. I aspire to get there one day for my companies.
Thanks for much for watching! -Zach
This vid came in very handy today. Thx!
Very helpful video Brother Ryan, you are a GOD sent. This is a very timely do it yourself Pillar lights set up for my JL....A popular Jeep shop wanted to charge me 4 hours of labor to connect.
Thanks for watching! We're happy it helped out! -Zach
Thanks for the video...this was an easy install.
I was having trouble locating the pigtails under the dash. This helped me locate them - THANKS!!
Thanks for watching! -Zach
Very helpful information. You guys really put out great videos. Thanks
Thanks for watching! -Zach
Thanks Ryan! I didn't know where to look for those wire ends to the switches. Now I do.
Thanks for watching, Ron! -Zach
Great Video I used it to hook up my new lights using AUX 3 on my JL! Thanks!!!
We're happy it helped you out, Aaron! -Zach
Thank you! Great explanation. Really appreciate this straight forward tutorial.
Thanks for watching! -Zach
Great video. Just bought my first Jeep. This still applies to the 2021 JL
Very helpful! I just finished wiring up my lights to a couple of these auxiliary switches. Easy task after watching this video. 👍
Thanks for watching! -Zach
Very well done. Thank you for posting.
Thanks for watching, Richard! We appreciate it! -Zach
awesome! thanks for this video!
What a great video! It makes it easy to understand and do.
Very informative and useful for my purpose. Thanks.
Thanks for watching, Terry! We appreciate it! -Zach
Great vid!
Extremely thorough and helpful video! Thank you!
You're very welcome! -Zach
fantastic sir. Thank you. You made a seemingly overly complicated system quite simple. I used this method for my compressor and it worked perfectly.
Thanks for watching! -Zach
Exactly what I’m looking for Thanks so much Ryan
Thanks a bunch for watching! -Zach
Great video, very helpful. I just wired two KC HiLites A-pillar lights to the pre-wired Aux panel in my JL, and I'm not sure I could've pulled it off without your video. Two additional comments, though.
1) I found that wiring the switch hotwire on the KC harness to the AUX wire did NOT work. The harness has it's own main hotwire that connects directly to the battery to power the system. Instead I connected the switch LOAD wire to the AUX wire and presto! Fully functional lights.
2) The lights pull only 8.5 amps, but I connected them to the 40 amp wire instead of the 15 amp wire because I will also be installing additional lights to my front bull bar. I want to run those lights to the same Aux switch, which would then in total exceed 15 amps, so the higher amp wire was the way to go.
Again, thanks for the great video!
LOAD wire.... this is exactly what I was looking to confirm before swapping wires. Had my “presto” moment just now, cheers!
Awesome video very simplified and easy to understand!!
Thanks for watching! -Zach
Thank you... Nice video
Thank you very helpful happy new year
Dope video! Just installed my light bar, just need to wire it up! Thanks!
Thanks for watching, Preston! We appreciate it! -Zach
Great video and very helpful!
Thank you for watching! -Zach
Great vid!!! Thanks ET!
Thanks for watching, Scott! -Zach
Great instructions mate. Little tip I learned along time ago was to use a seam ripper to strip/cut sheathing to expose wires. This way you never run the risk of cutting fingers(which happens) and cutting the sheathing off of your wires you’re trying to expose!!!!🤙🏽🤙🏽
Thanks for watching! -Zach
Absolutely a great video!!
Thanks for watching! -Zach
Very thorough and very helpful explanation!
Glad it was helpful! Thanks for watching! -Zach
Thanks for a great heads up video on how to wire your aux buttons.
Excellent. Thanks
Awesome channel. Awesome store!!!
Thanks for the love, Joshrs! -Zach
Great video!
Thanks for watching! -Zach
GR8 VIDEO!!! THANKZZ FOR SHARING!!!
Thanks for watching! -Zach
This is a solid instructional video! 👍🏼👍🏼
Thanks for watching! -Zach
SUBSCRIBE at terrain.jp/2AcpnrI
Check out Parts for your JL Right here:www.extremeterrain.com/throttle-out-sept2018-2.html
What are you planning on wiring to your JL's Aux Control Panel?
Lights and a winch for starters👍
Great video!
Glad you liked it! Can't wait to dive into more JL mods as they get released.
Great info. Thanks for this.
Thanks for watching! -Zach
Great vid. Covered all the bases
Thanks for watching!
Excellent clear concise the point, thanks
Glad it was helpful! Thanks for watching!
Great vidio simple to the point
Thanks for watching! -Zach
Awesome video, with great information, but it drove me nuts to see you not use the stripping tool when it was right there and you even called it a stripping tool haha.
Awesome.... just what I needed ... about the interior aux wires. That helps a lot, Installing a GMRS! thank you
Thanks for watching! -Zach
Excellent video! Liked, commented, and subscribed :)
Thank you so much! Look out for new videos from us! -Zach
great video, I am now ready to install lights and on board air. Thanks
Thanks for watching!!
Love that Jeep added these switches. What would make them better is if you could replace the switch buttons with oem style that were labeled "lights", "winch", "compressor", etc. instead of "Aux 1-4".
Really surprised the aftermarket hasn't done that yet.
I bet someone will make a generic sticker package for such a use
That's a good idea
Thanks for the video, what if the lighting harness has a relay and fuse on it already? Should those be eliminated when wired up to one of the switches?
This was super helpful! I’m struggling with the situation like the KC light had, how would those be installed?
Thank you for this video. Super helpful. Also just a big thanks for ALL the ones you put here. The extra help you give is has made me a loyal customer of ET
nice job.
Great video exactly what I was looking for!!! Safe to assume both lights get wired to the one power lead you showed .. and both grounds go to the 1 provided by Jeep for both pod lights?
I'm getting ready to install a Front and Rear Dashcam on my 2018 JL So I will use #3 and #4 switches wired under the dashboard so I don't have to go through firewall. I need one battery all the time and one accessory switched. So this is perfect. Thanks for the info !
Found out that there is 6 wires under the passenger side dash pre wired. 4 for aux switches and 2 for accessory and direct battery. Worked out perfectly and didn't even have to use the 4 wires for aux switches.
I have been wondering about how to hardwire my 2 cams. Do you have constant power for your “parking mode”? That’s why I want the direct power.
How did you hide the front camera cable? Hoping to see an answer to Gavin's question as well. Thanks!
@@doogiesvids5549 Dude, Video pls!!!! Gonna do a Dashcam and CB install. would love to see this!
@@doogiesvids5549 I'd love a write up or even a video of how you did the cameras. PLEASE!
Excellent information, liked, and subscribed. Question: What if you're wiring up two matching lights on the right and left pillars? Same wire/switch or use another auxiliary?
You can wire them to the same switch. Only reason you’d need to wire to different switch is if you want them to turn on/off independently from each other. Or if you have too large of a load for one switch
That’s looks good
Thanks for watching! -Zach
If you "score" the heat shrink insulation on the factory wire (#3) & heat it, the insulation will split revealing the connector inside. There may be a bullet connector or a molex pin on the end that you can plug into. P.S. nice wire strippers. At least they aren't the $10 Pico ones.
Many thanks will get some lamps on now .
Just noticed aux 1&2 light up 3&4 do not is that normal with nothing added yet ?
On the KC lites wiring harness there is battery connectors do we skip them and just use the hot and ground on the switch end of the harness or both?
Also any advantage from crimping and using connectors over soldering the wires together?
any guide how to mount a dashcam with aux switches?
We go camping a lot, and I'd like to be able to have a series of lights in different areas to be able to light up the camp for night time setup if it happens. Can I wire LED lights to the 40a circuits, or will it blow the LEDs? I can wire the wench directly to the battery, so it's a non issue. Or, can I somehow rewire the 40a circuits to be 15?
Can you use the aux switches in a 3 position mode? If i have lights with bezel light and a beam (2 ON modes like KC Flex ERA 3) can I put it on one aux switch?
Great video, thank you! I asked at the dealership and they couldn’t tell me where the connections were or much about them at all. So glad Jeep finally did this so I won’t have to buy an SPOD again as with my JKs.
Thank you for your feedback! -Zach
Awesome video as I have a 2019 JL and just purchased an 18" Lumen. The end caps can stay lit up without the led lights on. Where can I run that connection to keep the ends lit up when the ignition is on?
Up your ass and to the left.
LMAO Just kidding, calm down. 😂
They could be wired into AUX 3 or 4. And set it to "remeber last state" and set it up to "ignition" power
Any clue how these switches would work with a light that has multiple settings? Example of 3 settings: Amber backlight, Clear running light, Off. Thanks! Love your videos and am a recent new customer!
You'd probably only use one of the switches for the 'main' light-feature, and hook backlight and running light into existing circuits such that they come on when the jeep running lights come on.
Great job in explaining the details if the six switches. I would have watched it again but not sure I could handle the distracting music again.
Trying to wire a dash cam with cigarette lighter plug to one of my aux switches. This helped most of the way. Now i have to figure out when i clip the cigarette lighter adapter piece off the dash cam which wire goes where. Hopefully it is red and black making my life easier. I am not a mechanic or tech person.
can you wire interior LED foot lights to the aux buttons? are they the same wire/colors as exterior, and where would i ground
Question.. I have an after market stereo system can I still install the auxiliary switch bank
could you still use the larger amp wires (1 and 2) for lights?
Would you use the provided relay in KC lights wire harness or bypass the relay?
You can bypass the KC relay as your Jeep has internal relays built in.
How about adding existing OEM switches to existing switch panel for a JK, 2015 Rubicon for accessories.. the ones next to the axle lockers and sway bar disconnect?
What auxiliary switch should i used for a 190 watts led bar? It is about 15.9 amps. Should i go with 40 amps switch?
How do you know which switch outside under the hood is for which Aux switch? Are the wired under the hood labeled?
Great video. Question is it one switch per light or can a set be used on one aux switch?
Fred, not sure what year you’re running but mine is a ‘21. When I go into my Settings, I don’t see an option to select Aux Switches. Do you see them?
As long as the total amperage draw of all the lights don't exceed the amps of the switch (15 and 40) all your lights can be wired together on one AUX switch. It is best to stay under 80% total draw (12 and 32) per circuit.
I dont have the same uconnect screen. Will this still work on the the small 5inch uconnect screen that's on my JL?
I have some pod lights with an amber function, is there a way to with those through these switches?
I installed Rough Country 2-inch lower windshield kit Led's to the Aux #3 but for some reason I am getting radio interference every time I turn them on, any suggestions.