Got to admit that the desk you made with our E7 desk frame looks even sturdier than ours. Applause from the FlexiSpot Team. Thank you for your incredible work friend!
Hey y'all, please reconsider working with creators who openly and unapologetically make fun of people with disabilities. I don't know what your personal beliefs are, maybe you also believe that people with OCD should *have* to endure stereotypes and biases just because some people think it's funny to **encourage** harmful language changes as Cam is actively doing in this video -- but it's not what a huge proportion of humans believe. While you may see short-term profits from people who enjoy the chance to put others down, in the long term I think you'll come to realize it's not the right choice. It's up to you whether you realize that before or after a well-deserved public backlash for associating with people who hurt people. I don't know if you had any kind of contract about social behavior in your dealings with Blacktail, but I'd be requesting that my products and name be removed from any video containing ableist and harmful language. Or at the very least I'd recommend you edit your comment to include a disclaimer regarding your opinions on the topic of hurtful language choices, as a company and as human beings. Thanks for reading and considering.
@@adamkaktusmusic 9:06 in the video. He even acknowledges that his source for why he's allowed to use the term in this context, SPECIFICALLY ALSO TELLS US that it's an offensive use, and AGREES with that offense, and continues to do it anyway. Not cool.
"There was no way I was going to let down 25% of my audience, so I decided to cut it down into smaller pieces." Nicely done. I love the maker content but the commentary and understated humor are a big plus in your videos too. I always enjoy them.
I also laughed when he was talking about spending money on tools and giving examples of extravagant things other people spend money on, throwing in some people even have kids as a offhand extreme example of how people spend money.
Dark for sure ! Hey Cam, I'm a spray-painter from Germany and I used to work in an automotive shop for several years (learned a lot!!) I've noticed that you struggled a little bit with your sanding on this project and I think I got one or two tips that might help you. First : Don't put to much pressure on your orbital sander! With to much pressure your disc won't turn, but rather vibrate which can produce those curls* on the surface. More pressure will generate more heat on the surface, wich will soften your coating up for a moment and make it vulnerable for curls* or bind up your Sandpaper. Especially if your coating has not hardened completely. Bound up sandpaper is more likely to damage your surface, because you are dragging stuck particles over it. Always put your sander flat on the surface, if possible never use the edge of the sander in an angle. It will uneven your surface and maybe leave deep scratches. To much pressure will also damage your sander (gears and shaft especially) and your orbital disc, it will start to vibrate more or even shake or wave in your hand and maybe leave a bad surface finish. Rather use lower grit sandpaper with less pressure, than higher grit with more pressure. Second: Never use dry sanding paper as a wet sanding paper! The liquid will loosen the grit (particles) of your dry sanding paper. Those loose sanding particles will be rolled around or even pressed into the surface under your orbital disc and potentially leave curls*. Third: Always sand as clean and dust free as possible! No matter if dry or wet sanding, always clean your surface and tools between the grits or every now and then. Left over sanding particles of higher grits, dust or dirt in general can damage your surface. Especially because you are sanding most of your projects horizontally the dirt will stay on top of your surface. If you pay attention you will sometimes even feel or hear particles or debris rolling around between your sandpaper and surface. Forth: Always sand in circular overlapping motions (if possible!), especially hand sanding on flat surfaces! It isn't always possible to sand in circular motion, but it is the best way to keep your surface even and avoid surface damage. If you (hand)sand only back and forth, you are dragging the same particles over the surface over and over again. This can lead to deep scratches or rubbing* on your surface. Also you can unknowingly create deep craters on your surface wich you will discover after your surface finishing/buffing. I do have a few more but I am pretty sure that you know most of them, I am also pretty certain that you know most of the ones I have just pointed out or someone was faster than me but maybe there is something helpful in there. You will surely get the feel for spray painting soon, cant wait for that. Love your Vids because you are honest with you failures and super entertaining, I learn something new almost every time I watch your projects. They are super amazing and inspiring like the denim table or the burned one❤
Jens, Thank you for posting your sanding tips!!! Most of your tips I have been doing the wrong way and get the results you were talking about never realizing it was because I was sanding wrong. Looks like I'm going to get a new orbital sander since I have used mine edge sanding A LOT and wondered why it vibrated SO bad. Thanks again sir!!!
@@MPH6260 @JamesEhler I did the same mistakes for years but never realized, UNTIL I started working at an Automotive shop^^ It would make me super happy if one of the tips can help you to improve your results. ;D
Dang, that explains why I have so much trouble with my orbital sander both at work and home! Thank you for these tips! Especially the hand sanding tips!
Cam, I don't think you're giving yourself enough credit. You aren't "tricking" anyone into thinking you're a good woodworker, you ARE a good woodworker. A great one. All these tips and tricks you give, as well as your attitude that everything that leaves your shop has to be done to to the best of your ability, is what makes you a great woodworker.
I think the thing Cam does is what many people who constantly try to get better do, shit and judge themselves. I constantly do this even when i’m fairly adept at something because it keeps me humble and keeps me striving forward. I will say it’s not for everyone though
Also,he’s got a great eye for interesting woods and how to best showcase the qualities of that piece of wood. That is an inborn talent. One not many people have and is worth paying for.
Imposter syndrome... I've been laying floors for over 15 years and I still feel like an Imposter sometimes, it's like I'm just waiting for everyone to realise that I don't know what I'm doing.. even though I'm great at my job and get nothing but compliments
Dark. And here I sit with zero woodworking skill but absolutely enthralled by watching the fine attention to detail you put into each piece. I work in IT and a standing desk like this is in the level of dream desk range. Amazing quality and amazing work, like all your others! Thank you for the video.
Шикарная работа. Тёмный стол просто нечто. Залипла . и вы молодец, что относитесь ко всему так позитивно. Что говорите и показываете всё как есть. А не как другие, что показывают только свои успехи. Словно у них не бывает ошибок, недочётов и промахов. Удачи Вам, терпения и сил.
Dark, that table top is without a doubt the most BEAUTIFUL piece of woodworking that I’ve ever seen! Absolutely STUNNING!!! Thank you so much for showing us all the labour intensive steps it took to produce such a beautiful item!
The dark table is just soo beautiful, I don't think I have ever seen someone document their work so meticulously it's been an absolute pleasure to come across this video. And yes thank you for those insightful tips.
I have been a furniture maker for years, Oak and Alder, glue and dowel. I just started doing live edge and I am doing my first real "from scratch" piece. I had a tree on my property struck by lightning and I salvaged the useable pieces. In the spring I am slabbing it with a chain sawmill and I loved watching your work. I am almost 75 years old and am making furniture either for myself or to give to family and friends. No pressure, no customers saying why is this so expensive, I can go to Levitz cheaper. Thank you for teaching an old dog new tricks!
Sir, We never stop learning. "Old dogs new tricks" I think it amazing that you are still keeping Your mind and body active with artistry. We are a long time dead. I hope Your family and friends appreciate your gift(s) Be well.
Dark. 72 and learning more every day. Cam, you are an inspiration. Resourcefulness and innovation are the keys when you dive into something you've never done. I'll start on a desk in a couple of months that will require joining 2 large curved slabs of cherry with a narrow black epoxy seam. I've been rolling the process over in my mind for months. Not knowing if you can pull it off is always exciting.
То что вы сделали с этим капом - это произведение искусства. Вы смогли выделить самую красоту природного творения. Восхищаюсь вашим упорством и дисциплине
I love how you're 6-7 years into turning your hobby into a legit business and still every single video there's at least one or two times where you say "lesson learned" . You're truly set out to master your craft, LOVE IT!
I spent 8 years in my buddy's wood working shop making everything from guitars, cabinets, lawn furniture and kids toys. I just found your channel and love it. It brings back fond memories of relaxing and fulfilling times. Thank you.
Dark. I'm an old great grandmother and I love your work. If I were young again, I'd be trying to do that. You make such beautiful pieces. Keep up the good work and the videos!
Cam, I am not a woodworker, and have no desire to become one, but I absolutely love your videos. Totally different than the news, my homework, or my quilting projects. Thank you for the entertainment and the education.
I don't know how I stumbled on your video at 3 am, but the Dark desk is absolutely stunning. You are very talented and your voice is very calming. I like how you explain what you are doing. I definitely don't think you are a fraud or not a great woodworker. Thanks for keeping me company while I couldn't sleep!
I am amazed at how much your system has improved over the years. I remember watching your videos way back in the day and it is like night and day. Not only have you improved your technique, but what really separates you on this platform is the production quality changes. Your lighting, camera work, and audio are incredibly well done. I love the fact that your dedication to both the craft and the content has truly paid off.
Light and dark, I'd need them both. I really think you are Bob Ross, and I think you've earned that. You're process is rigorous, you experiment and change your techniques over time, and you have an incredible eye for detail and beauty. Your work is just stunning.
Bob Ross said something about needing light to show the dark or vice versa. No that was probably Bill Alexander with the happy trees. I think I need to see if there are some old Bob Ross videos.
I love how humble you are..admitting your not a super skilled woodworker & also being so picky if your not happy with your results you just know what needs done..Re-doing it..I’m a 23yr interior finish carpenter & like you if I’m not happy with something I know I’m redoing it..building staircases & railings there’s so much that can be gotten away with but like I tell my co-workers & my girlfriend that say no one will ever see it or know the difference I say yeah but I know.. I just can’t walk away from something I know isn’t right & my name is on my work & quality.. so it only takes 1 person to say you suck & negativity spreads quicker than positivity so I’ve found if I don’t like something just fix it & I know at the end of the day I know I did better than most other carpenters would..& I tell people it’s not that I’m so much better than a lot of carpenters (that have the skills I do) it’s just that I care & take pride in everything I do more than most..I’d rather be told I over think stuff & im slow than being told im a hack or my quality sux..so you make me feel better about redoing something to get it perfect & not stress about it..I’ve learned it doesn’t take that much longer to do something right ..but I love your commitment to quality over time it takes re-doing something ..sometimes you got to go slow to go fast
Dark desk is absolutely gorgeous! It's clear that you take your time and really pay attention to detail, and I think that's part of what sets you apart, even from people have been doing it longer. You don't rush, and you take time at every single step of the process to get it right. That's no trick, and no fraud - you're an amazing woodworker because you take that time and pay attention to all the small details.
Absolutely - in fact, I would say that what really makes a better craftsperson IS that attention to detail. Some people may be naturally gifted with dexterity and easy precision, many more have to work to get the skills - we're all capable of learning what needs to be done, but it's the mindset that ultimately sets the craftsman apart from the jobbing carpenter/builder/etc.
I’m just a simple woodworker and when I saw you stain that burl black I was horrified, thinking why would you do that. The end result sure showed me why you did that! That would have to be the most amazing finish that I’ve ever seen in my life. Absolutely beautiful.
By the way.... You HAVE actually earned my subscription, Cam. Really happy with the story involved almost every single time. I have been watching for years, as well. So, very inspired to design further than I normally do. Thanks, Cam! Hard work in design is under rated!
Could you do a total cost breakdown into a project like this? When a piece sells for $9,900, how many hours of work total, material cost, equipment cost, electricity (maybe a bit harder to break down but I'm sure it has an impact when using drills and electric sanders. Amazing piece!
That isn't just woodworking (it is definitely that!). That is art. Timeless, unquestionable Art. And with the addition of the Flexispot, kinetic as well. wow.
Dark, absolutely amazing!!!! I am not a wood worker, but I can watch you videos forever. They're incredibly informative and the tips you give are honest for those starting out. Thank you.
The dark finish is incredible. I typically do small woodworking projects with contrasting wood, hand cut dovetails, some inlays, some epoxy inlays. With the lighter colored wood by itself I hadn't achieved the look I wanted. I played around with alcohol dyes using what I had, my printers used cartridges. Got some great results and pretty much unlimited color combos. I really like how the black you used turned out, stunning. You put in a lot of time on your pieces, it shows. Very nicely done.
I have been a woodworker for 52 years, professionally. I watch this and see all the tricks to reach the goal of achievement. Just as I have. I specialize in custom entertainment builds with every bell and whistle. I have build at least a dozen or so of tables but always ordered the slabs from a fabricator like like yourself. I wish I had the gadjetrty you use, All by had here! I am retired now and have sold my shop. You brought it all back for me, Thank you
Dark. I'm literally in awe over that dark finished table, it's the most beautiful piece of woodwork I think I've ever seen. You have turned a beautiful product of nature into something even more sublime. Amazing job!
I like the dark piece better. They’re both done absolutely beautifully, but that depth you got with all that work and how dark it became, was amazing!! That table looks awesome! Nice work!👌🏼
@@BlacktailStudio No need to feel guilty. A thing is worth what people will pay for it. What you make will last for centuries, if looked after. It will also increase in value as it becomes antique. Look how much some people pay for gimmick technology, even top marques to drive around in, clothes too and none of that will last nearly so long nor will still be useful in a few years. If anything you might be under pricing.
Making tables look like guitar bursts is a fantastic idea and I don’t think I ever seen anyone do that before! Would really love to see a dark to blue or purple burst on a table.
I'm about to make a table or a guitar one and I plan to do a purple metallic with this stuff called unicorn spit I don't know I just found it and I think it would be good idea I'm so it's odd that you wanted to see something like that so when I get done with that I'll try to send you some pics if you're interested
The light one is amazing, love the dye of the dark but the natural wood truly shines. As for feeling like a fraud/imposter at times, I feel like that's a feeling every wood worker gets as they grow and learn, I think it's a sign of self awareness and an ability to evolve
light or dark? Both are beautiful. I think the best part of this video is your attitude. I definitely agree with you about caring more beats out skill, cause it doesn't matter how much you know if you can't be bothered to apply it. I love that you're so down-to-earth, and talk about your mistakes, and the helpful tips you've figured out along the way! while you turn out amazing pieces. It annoys me when people say "Literally" to mean not literally!!
That is often why talented hobbyists can outperform seasoned professionals: they can put all their care into what they are making, while the professional may have a hard deadline and has to ship the thing with known flaws. That is also the downfall of the perfectionist (including many hobbyists): not actually getting anything finished ever, because it is not perfect.
Dark is so beautiful... very inspirational. It's just one of those things you can't put your finger on, but it's such a pleasure seeing the finished product.
Did not think that the dark approach would be as good but am amazed to say that it knocks spots off of the plain finish. Just goes to show what can be done with patience and determination!
Light versus Dark? Dark versus Light? Oh my goodness! At the very beginning, I couldn’t understand why you would want to make one of the cuts so dark and “spoil” it? I love light coloured wood and I am fortunate to own a lovely dining table and chairs, made over forty years ago, from a mix of ash and light oak. I still love using them. WoW 😮, I watched with fascination how you stained the dark side (I might have tried adding a touch of deep red or burnt sienna stain to the middle to “warm” the central area) but I couldn’t stop watching every detail as you went through the polishing process! I’m a convert! I LOVED the dark finish! I wish that I’d found your RUclips a couple of years ago - I can’t imagine how many videos I need to watch to catch up with your more current creations?! Thank you for sharing your talents Hazel (I’m from Manchester, England)
Dark all the way! I'm usually a light kinda guy too. I love all woods and their natural beauty but the contrast the dark finish provides is such a beautiful statement. Well done Cam.
@@nick11jl What I do or don't do has nothing 2 do with the fact the anti-color of that table is a mistake, U troll. Tell us next how my shoe size controls the path of hurricanes =))
This table top might be kind of simple to some woodworker but I'm not a woodworker but I love watching woodworking videos (especially blacktail videos), and this table top looks absolutely flawless as usual...Sick work man!!
How beautiful is that! I don’t particularly like live edge tables, but seeing your approach and the finishes that you strive for puts your tables into another league. This is a masterpiece!
The dark table looks AMAZING. The fad from the outside to in looks perfect. Thank you for sharing your tips,. It definitely helps to understand the process from start to finish....
The dark table is beautiful work. The fade that you got on it is amazing and just genuinely amazing work. Has got me wanting to try make my own table now. The amount of time, effort and care you put into your work really shows.
When the stain first went on I thought you ruined that gorgeous piece of wood by going too Dark, but as you went through subsequent sanding and staining sequences I thought it became more and more amazing. Turned out just awesome in the end. Team Dark all the way on that
Dark, I am a 46 year old dude that has just found the relaxation, joy, and extreme frustration of wood working. I have been looking at video after video for ideas, inspiration, and knowledge. I just wanted to say thank you for reminding me that is ok to screw up. You are quite educational and incredibly impressive to watch. Thank you for your content, I did subscribe and will be waiting for your next video.
I messed up a picture frame one time, the table saw fence moved on me and messed up my cut, but after finding a solution, it actually came out better than how I was going to do it in the first place.
That dark one looks beautiful! You are so skilled, and I hate that people can't just enjoy nice things. I also love how honest you are. Beautiful work and amazing skill! That standing desk is dope too! Almost makes me want one lol!
“Dark for me” The Mirka mesh sanding paper works soooo good! I use it everyday and i love it. It’s not working for everything but when it works, it works great
Dark, you have had my subscription for a while, I just don't post much. You are far from a fraud, the attention to detail and commitment to get even the "tedious" tasks perfect is what makes you a professional woodworker. Some of us may have been woodworking longer, but that does not make us better, you are the best at these types of tables I have seen. Keep it up, I love to see what you create.
I have to agree. I am a professional welder, have been for 32 years. What makes a professional is taking the time to make thing the way you would want them to be if you were spending that money for yourself to buy the product. NEVER take shortcuts and ALWAYS fix what you know just isn't quite right
When you start polishing with the machine start it on its lowest setting to spread the polish around, then increase the speed. That way you won’t get all the splatter on polish everywhere. Also a good idea to ‘prime’ the pad first to make sure you don’t have any dry spots on the pad. Finally you should use your air compressor to blow out the pad regularly so you remove any contamination that could cause scratches in your finish. Hope that helps 👍
Oh my goodness… LIGHT & DARK! They are both stunning… If I was forced to pick only one, I would go with… dark, I suppose, because I’m not used to seeing such a gorgeous dark/black stain. I stumbled on your channel and now I can’t stop watching you work. I love woodworking , and I’ve made a couple things myself, but not for many, many years. Thank you for sharing it with us!❤ P. S. If it was nice to see you smile…
I can't choose..I would love either. Having grown up with someone who did a 'little' woodworking, your comment about the tools is spot on! I. myself, am a knitter and spinner. I've spent more money on a fleece then on a commercial yarn to make a sweater. For me, spinning is not a cost saving measure but a quality control measure. I can buy the fiber I want and make the yarn I want. Bonus for me is the complete enjoyment I get from the whole process.
Light or Dark? Oh my gosh. They are both beautiful, but the work and care you put into that dark finish... just wow. It glows with the effort as much as the finish. Amazing work.
I am by no means any kind of woodworker, matter of fact am an almost 70-year-old woman with RA however your work is incredible and been watching you for a while...I realized that I had never made a comment to you and wanted you to know that there, I know, have to be others that just love the wonderful work you do. You are amazing, please keep up the great work and videos which for me are extremely entertaining and love seeing the whole process, yes, including you keeping any errors you might do. I hope you see this comment, being so many in here am sure you keep extremely busy with all you do. That table looks awesome like most that you do!
You took the words out of my mouth. I've been a woodworker for way too many years (I'm only 69 & a 1/2.) to not appreciate the effort and dedication shown in these videos. Be well and satisfied!
Dark. Absolutely impressed and taken aback by the labor this requires. So well done. So humble and transparent. Thank you for making the video on top of that. Definitely subscribed.
It's a toss-up between light and dark they're both very beautiful. It amazes me how you take a chunk of wood and make it into a functional masterpiece plus take the time to do an individual tutorial love your work man.
As a guitar maker and finisher of guitars... your video is on point. PLUS, it's given me new ideas for making even "more better" guitar bodies. Thanks! EDIT: That came out so beautiful I'd pay $20,000 for that table. WOW.
Dark. I spent my working life as a jewellery polisher, so precious metals were my thing. I appreciate your comments on folks who care about their work more than some others. Your work is a joy to watch. Thank you.
Dark, love how you went through the different stages of sanding to get the dark to light fade. I also appreciate the way you don't just look at wood as an "only wood workers know how" for the polishing and finishing of your work but go out and see what other trades ( car detailer) would do to get the finish your after. Top job once again 👍🏻
Light or dark- I fell in love with this piece. First time on the channel you can bet it wont be my last. I'm really new into woodworking and found every second of techniques & tips to be inspiring for my tiny home project. I'll keep adding improvements to my tiny home till I can make something rivaling the quality of that desk.
First time viewer I was a car detailer in the 1970s and even back then we used a lot of the same techniques just different products. I think it’s easier today to get results that you want then in the 70s. If I made a mistake it could be catastrophic. Enjoyed your work and good luck in the future.
Dark. Your content is truly inspiring. I've spent (way too) many hours the past few days watching your videos and I have to say your work is definitely contributing towards my dream of having my own woodworking shop one day. I'm not practising any woodwork as of today, but just recently it has become my go-to content on youtube, and you have become one of my favorite content creators since then. Thank you!
Dark- when you first stained it, i thought "Oh no!". But the finished product is beautiful. I really appreciate your candid comments. I have learned a lot from you including the ability to throw it out! Thanks, Cam.
Dark - you can also use “penetrating epoxy” from the stone industry instead of thinning down regular epoxy. There are a lot of diamond tooling pads and such from the stone industry that you could incorporate into your process that will help you save time and money, as well as improve what you are already doing when it comes to polishing - it’s all basically the same thing regardless of whether it’s wood or stone. Nice job - well done !!!
This is beautiful. As a sit/standing desk user though, cable management is a big deal. When I put my desk top on the electronic components, I had to create a recess/box attached under the desk for all the monitor, speaker and peripheral cables, so that the desk could go up/down without a mess of cables being dragged around. If you do this again, it'd be great to see what solutions you could come up with for this.
DARK. another huge difference between you and other channels is that you put so much effort into commentary. keeps the video alive during the "boring" parts (which aren't boring) and ensures constant engagement. love it!
Light and Dark - I have to admit when you first applied the dark stain I though the slab was absolutely ruined. Then you kept working it, and your patience paid off. It looks stunning - way better than I thought it would!
As a longtime woodworker myself, the tips and tricks about "working" the wood are always appreciated and do help the non-woodworkers understand your process. I'm not a big fan of the trendy epoxy thing, as I really like to accentuate the beauty of natural woods and even hesitate to add stain to natural hard and softwood, so i don't hide the grain. So...after all that work and money you spent on this build it looks to me like plastic laminate. Sure I can still see some grain, but that beautiful burl got lost in the stain and high gloss polishing. But heck...that's why they make chocolate AND vanilla...
It honestly made my day to see a reply in the comments on a craftsman's video that disagreed, but was still positive and respectful. My hope for humanity is restored just that little bit more. Thank you for doing good!
I love dark wood tables so much! Killer job! I think anyone trying something they have never done before should be a perfectionist. For you to have been doing this for 7 years I am not surprised it came out so well.
Dark. I'm a woodworker myself, mostly cabinets but with the occasional cutting board thrown in. I stand in awe of your attention to detail not to mention the incredible job you do with your finishing. My hats off to a true craftsman.
That darker desk looks amazing. The grain detail and the effort you put in all comes out amazing. I’m a huge fan of PRS guitar finishes and you’re taking their 10 top premium woods/finishes and bringing it into desks/tabletops. Amazing work and excellent video, thanks Cam!
Dark: When you started on the staining I thought that you'd lost the plot on such a beautiful piece of timber. Oh how mistaken was I, the end result is amazing. It would be interesting to see your treatment of the brother slab without staining it and keeping the natural colour. Please keep sharing your amazing work. Thank you!
I am always blown away by your commitment to excellence. What a magnificent masterpiece you created for this video. It looks like an aerial view of some mysterious planet's landscape. Absolutely gorgeous!
Dark. I'm a little embarrassed to say this is your 1st video I've come across. I could watch you do this for hours. Well done, sir. Beautiful piece of furniture.
You’re not an “I Just Got Lucky” kinda woodworker. The painstaking work you put into your tables is awe-inspiring, and I love the eye-popping reveal. On another note, I’m a subscriber, have hit the bell, but missed the notice on this video for some reason. Glad I found it.
Blacktail: You should be charged with grammar fraud! At about 1:00 minute into this video: "I'm not doing anything that anybody could do if they just put their minds to it." OUCH!
@@davesmith5656 You’re certainly one of the guys that corrects people who say “I could care less”, which ironically applies to those who care the most down to those who care the least, instead of saying the more stinging, “I could NOT care less” said barely moving the lips and with a small hair flip as they turn away like I did when I read your comment. Arncha?
Dark, you, sir, have an incredible ability to persevere through your frustrations. I learn more with every video. Thank you for sharing your inner process, along with the physical process.
your rational, sharp humbleness while working is amazing to watch. A lot of us (at least me) are using your videos to efficiently distract from struggles we can't or won't do anything about - and it's great to learn and get inspired while doing so. keep it up man!
Dark ! I don't comment on videos that much, more of a lurker viewer, but man, I really enjoy looking at the dedication and passion you put in your work ! I'll be thrilled to be able to afford even your trashed projects at this point ! Thanks for sharing, and congrats for your incredible work !
Dark was amazing great idea with the guitar reference for inspiration! If i was not living in an apartment and strapped i could definitly want to do what you do. My grandfather loved making things in a woodshop and so did my father. Woodshop for me was one of the few things i did in highschool that i loved. Even 15 years later i still remember the smell of woods and the feeling of finishing my first cutting board. i sanded that thing into oblivian to get that glass like feel i wanted. Thank you though for the bit of time i spent watching i really loved it. Thank you for sharing.
Light natural color is nice. I use epoxy a lot in boat building, there are a couple things I might suggest: When using West Systems epoxy, use the 207 hardener instead of the 205. It is designed for clear coating applications. While adding the black to your epoxy probably protects you, the 205 hardener can get cloudy after it has cured. When applying epoxy to bare wood, I always do it while the temperature in my shop is falling - getting cooler. I heat my shop up over 80° for a few hours before doing the work and then turn down the heat during the process. This causes the air trapped in the wood to contract, drawing epoxy in. If the shop gets warmer during the cure it can drive air out, causing bubbles. Warming the wood will also lower the viscosity of the epoxy, allowing it to penetrate deeper without adding solvents. Adding solvents is OK, but degrades some of the physical properties of the epoxy and slows down curing. If you are going to sand the surface level, get long boards with dust collection, it keeps the paper from loading up. Mirka Abranet has some great hand sanding tools with dust collection. Be careful using tack cloths on a surface that you are going to coat with epoxy. The waxes used to make the tack clothes are not compatible with epoxy and can cause fisheyes and other issues if any should get on the surface. Obviously, it is possible to use a tack cloth before epoxy without issues, but when it doesn't work, it can cause horrendous problems. Epoxy is not good with UV. Even "UV stabilized" epoxy will eventually start breaking down due to sun exposure. My research suggest that UV stabilized epoxy is designed for about 1,000 hours of sun exposure. For furniture in a house, this is probably a very long time, but it is just a matter of time. The ceramic coating you apply should help extend the live of the finish, but I always apply a UV protective clear coat to all my epoxy coated boats. A varnish or even better a 2-part automotive style clear coat will produce a much longer lasting finish.
Well thank you for sharing that regular epoxies cannot stand UV rays. I did not know that and always dried my items in direct sunlight. I live in Florida and the humidity turns my work into crap.
@@WarPigstheHun The effects of UV happen over time. It breaks down the bonds between epoxy molecules. Placing epoxy out in the sun should not do much to damage the epoxy. However, placing wood coated with wet epoxy out in the sun will cause air in the wood to out-gas. This can cause a serious problem with bubbles. Working with epoxy in humidity may cause a problem with amine-blush, a waxy substance caused when epoxy cures in a humid environment. This waxy substance can show up on the surface of the epoxy and must be cleaned off before any other stuff is applied over it. Blush can also occur in the epoxy matrix and may appear as clouding in the epoxy over time. The 207 vs 205 West Systems hardener resolves this issue.
@@NickSchade gawd, I wish my garage had AC. I have a small Ryobi fan that I sometimes use to help cure things and repel moisture. Maybe I'll buy more of those fans as a cheap solution to the blush and bubbling.
The Dark One really looks amazing, you did that gradient spot on. I also admire your skills at really finishing it with a perfect shine that's so much more obvious with the dark tint underneath. As someone who dabbles with car detailing and a little bit of body work, I wish my car was THIS shiny. When I get around to refinishing it next time, I really need to have more patience and take two days to do it. Thank you for this wonderful video!
Dark against such a solid piece really makes a great desk. I'm sure that makes an amazing computer desk. My Walmart folding table provides enough function, but that piece is just a work of art. Good Job!
Got to admit that the desk you made with our E7 desk frame looks even sturdier than ours. Applause from the FlexiSpot Team. Thank you for your incredible work friend!
Wow, thanks guys, and thanks for taking a chance on me here!
Hey y'all, please reconsider working with creators who openly and unapologetically make fun of people with disabilities.
I don't know what your personal beliefs are, maybe you also believe that people with OCD should *have* to endure stereotypes and biases just because some people think it's funny to **encourage** harmful language changes as Cam is actively doing in this video -- but it's not what a huge proportion of humans believe. While you may see short-term profits from people who enjoy the chance to put others down, in the long term I think you'll come to realize it's not the right choice. It's up to you whether you realize that before or after a well-deserved public backlash for associating with people who hurt people.
I don't know if you had any kind of contract about social behavior in your dealings with Blacktail, but I'd be requesting that my products and name be removed from any video containing ableist and harmful language. Or at the very least I'd recommend you edit your comment to include a disclaimer regarding your opinions on the topic of hurtful language choices, as a company and as human beings.
Thanks for reading and considering.
@@bclairelarr wtf are u on about
@@bclairelarr 🤡
@@adamkaktusmusic 9:06 in the video. He even acknowledges that his source for why he's allowed to use the term in this context, SPECIFICALLY ALSO TELLS US that it's an offensive use, and AGREES with that offense, and continues to do it anyway.
Not cool.
"There was no way I was going to let down 25% of my audience, so I decided to cut it down into smaller pieces." Nicely done. I love the maker content but the commentary and understated humor are a big plus in your videos too. I always enjoy them.
I laughed at that too.
Well it's VERY sound theory as well as being quite scientific! The majority of people are wrong so always go with the minority in a poll!
It took 2 or 3 seconds for that "25%" comment to sink in and almost did a "spit take" with my coffee. Well done.
I also laughed when he was talking about spending money on tools and giving examples of extravagant things other people spend money on, throwing in some people even have kids as a offhand extreme example of how people spend money.
I already heard that in the video what was the point of repeating it
Dark for sure !
Hey Cam, I'm a spray-painter from Germany and I used to work in an automotive shop for several years (learned a lot!!)
I've noticed that you struggled a little bit with your sanding on this project and I think I got one or two tips that might help you.
First : Don't put to much pressure on your orbital sander!
With to much pressure your disc won't turn, but rather vibrate which can produce those curls* on the surface.
More pressure will generate more heat on the surface, wich will soften your coating up for a moment and make it vulnerable for curls* or bind up your Sandpaper. Especially if your coating has not hardened completely.
Bound up sandpaper is more likely to damage your surface, because you are dragging stuck particles over it.
Always put your sander flat on the surface, if possible never use the edge of the sander in an angle. It will uneven your surface and maybe leave deep scratches.
To much pressure will also damage your sander (gears and shaft especially) and your orbital disc, it will start to vibrate more or even shake or wave in your hand and maybe leave a bad surface finish.
Rather use lower grit sandpaper with less pressure, than higher grit with more pressure.
Second: Never use dry sanding paper as a wet sanding paper!
The liquid will loosen the grit (particles) of your dry sanding paper. Those loose sanding particles will be rolled around or even pressed into the surface under your orbital disc and potentially leave curls*.
Third: Always sand as clean and dust free as possible!
No matter if dry or wet sanding, always clean your surface and tools between the grits or every now and then. Left over sanding particles of higher grits, dust or dirt in general can damage your surface. Especially because you are sanding most of your projects horizontally the dirt will stay on top of your surface. If you pay attention you will sometimes even feel or hear particles or debris rolling around between your sandpaper and surface.
Forth: Always sand in circular overlapping motions (if possible!), especially hand sanding on flat surfaces!
It isn't always possible to sand in circular motion, but it is the best way to keep your surface even and avoid surface damage.
If you (hand)sand only back and forth, you are dragging the same particles over the surface over and over again. This can lead to deep scratches or rubbing* on your surface. Also you can unknowingly create deep craters on your surface wich you will discover after your surface finishing/buffing.
I do have a few more but I am pretty sure that you know most of them, I am also pretty certain that you know most of the ones I have just pointed out or someone was faster than me but maybe there is something helpful in there. You will surely get the feel for spray painting soon, cant wait for that.
Love your Vids because you are honest with you failures and super entertaining, I learn something new almost every time I watch your projects. They are super amazing and inspiring like the denim table or the burned one❤
Good info. Thank you sir.
Jens,
Thank you for posting your sanding tips!!!
Most of your tips I have been doing the wrong way and get the results you were talking about never realizing it was because I was sanding wrong.
Looks like I'm going to get a new orbital sander since I have used mine edge sanding A LOT and wondered why it vibrated SO bad.
Thanks again sir!!!
@@MPH6260 @JamesEhler I did the same mistakes for years but never realized, UNTIL I started working at an Automotive shop^^
It would make me super happy if one of the tips can help you to improve your results. ;D
Dang, that explains why I have so much trouble with my orbital sander both at work and home! Thank you for these tips! Especially the hand sanding tips!
@@Fantatures You're welcome, I hope the tips proves to be useful.
Тёмный стол выглядит невероятно красиво! Особенно, когда своими глазами увидел, какой объём работы кроется за его красотой.
Cam, I don't think you're giving yourself enough credit. You aren't "tricking" anyone into thinking you're a good woodworker, you ARE a good woodworker. A great one. All these tips and tricks you give, as well as your attitude that everything that leaves your shop has to be done to to the best of your ability, is what makes you a great woodworker.
Totally agree, Sean!
I think the thing Cam does is what many people who constantly try to get better do, shit and judge themselves. I constantly do this even when i’m fairly adept at something because it keeps me humble and keeps me striving forward. I will say it’s not for everyone though
Also,he’s got a great eye for interesting woods and how to best showcase the qualities of that piece of wood. That is an inborn talent. One not many people have and is worth paying for.
I totally agree !
Imposter syndrome... I've been laying floors for over 15 years and I still feel like an Imposter sometimes, it's like I'm just waiting for everyone to realise that I don't know what I'm doing.. even though I'm great at my job and get nothing but compliments
The dark one is gorgeous with several color depths. And I love it that you show how you improve your skills.
Dark. And here I sit with zero woodworking skill but absolutely enthralled by watching the fine attention to detail you put into each piece. I work in IT and a standing desk like this is in the level of dream desk range. Amazing quality and amazing work, like all your others! Thank you for the video.
Шикарная работа. Тёмный стол просто нечто. Залипла . и вы молодец, что относитесь ко всему так позитивно. Что говорите и показываете всё как есть. А не как другие, что показывают только свои успехи. Словно у них не бывает ошибок, недочётов и промахов. Удачи Вам, терпения и сил.
Dark, that table top is without a doubt the most BEAUTIFUL piece of woodworking that I’ve ever seen! Absolutely STUNNING!!! Thank you so much for showing us all the labour intensive steps it took to produce such a beautiful item!
The dark table is just soo beautiful, I don't think I have ever seen someone document their work so meticulously it's been an absolute pleasure to come across this video. And yes thank you for those insightful tips.
I have been a furniture maker for years, Oak and Alder, glue and dowel. I just started doing live edge and I am doing my first real "from scratch" piece. I had a tree on my property struck by lightning and I salvaged the useable pieces. In the spring I am slabbing it with a chain sawmill and I loved watching your work. I am almost 75 years old and am making furniture either for myself or to give to family and friends. No pressure, no customers saying why is this so expensive, I can go to Levitz cheaper. Thank you for teaching an old dog new tricks!
Sir, We never stop learning. "Old dogs new tricks" I think it amazing that you are still keeping Your mind and body active with artistry.
We are a long time dead.
I hope Your family and friends appreciate your gift(s)
Be well.
I subscribed to your channel so please show a video of your work thanks
Is Levitz still around?
Dark. 72 and learning more every day. Cam, you are an inspiration. Resourcefulness and innovation are the keys when you dive into something you've never done. I'll start on a desk in a couple of months that will require joining 2 large curved slabs of cherry with a narrow black epoxy seam. I've been rolling the process over in my mind for months. Not knowing if you can pull it off is always exciting.
Haha! "Levitz". I imagine many viewers will be unable to understand that sentence.
Sounds like a town somewhere in Israel, if I didn't know better.👍😁
То что вы сделали с этим капом - это произведение искусства. Вы смогли выделить самую красоту природного творения. Восхищаюсь вашим упорством и дисциплине
I love how you're 6-7 years into turning your hobby into a legit business and still every single video there's at least one or two times where you say "lesson learned" . You're truly set out to master your craft, LOVE IT!
I spent 8 years in my buddy's wood working shop making everything from guitars, cabinets, lawn furniture and kids toys. I just found your channel and love it. It brings back fond memories of relaxing and fulfilling times. Thank you.
Dark. I'm an old great grandmother and I love your work. If I were young again, I'd be trying to do that. You make such beautiful pieces. Keep up the good work and the videos!
Me too..
Cam, I am not a woodworker, and have no desire to become one, but I absolutely love your videos. Totally different than the news, my homework, or my quilting projects. Thank you for the entertainment and the education.
I don't know how I stumbled on your video at 3 am, but the Dark desk is absolutely stunning. You are very talented and your voice is very calming. I like how you explain what you are doing. I definitely don't think you are a fraud or not a great woodworker. Thanks for keeping me company while I couldn't sleep!
I am amazed at how much your system has improved over the years. I remember watching your videos way back in the day and it is like night and day. Not only have you improved your technique, but what really separates you on this platform is the production quality changes. Your lighting, camera work, and audio are incredibly well done. I love the fact that your dedication to both the craft and the content has truly paid off.
Light and dark, I'd need them both. I really think you are Bob Ross, and I think you've earned that. You're process is rigorous, you experiment and change your techniques over time, and you have an incredible eye for detail and beauty. Your work is just stunning.
Bob Ross said something about needing light to show the dark or vice versa. No that was probably Bill Alexander with the happy trees. I think I need to see if there are some old Bob Ross videos.
I love how humble you are..admitting your not a super skilled woodworker & also being so picky if your not happy with your results you just know what needs done..Re-doing it..I’m a 23yr interior finish carpenter & like you if I’m not happy with something I know I’m redoing it..building staircases & railings there’s so much that can be gotten away with but like I tell my co-workers & my girlfriend that say no one will ever see it or know the difference I say yeah but I know.. I just can’t walk away from something I know isn’t right & my name is on my work & quality.. so it only takes 1 person to say you suck & negativity spreads quicker than positivity so I’ve found if I don’t like something just fix it & I know at the end of the day I know I did better than most other carpenters would..& I tell people it’s not that I’m so much better than a lot of carpenters (that have the skills I do) it’s just that I care & take pride in everything I do more than most..I’d rather be told I over think stuff & im slow than being told im a hack or my quality sux..so you make me feel better about redoing something to get it perfect & not stress about it..I’ve learned it doesn’t take that much longer to do something right ..but I love your commitment to quality over time it takes re-doing something ..sometimes you got to go slow to go fast
Dark desk is absolutely gorgeous! It's clear that you take your time and really pay attention to detail, and I think that's part of what sets you apart, even from people have been doing it longer. You don't rush, and you take time at every single step of the process to get it right. That's no trick, and no fraud - you're an amazing woodworker because you take that time and pay attention to all the small details.
Absolutely - in fact, I would say that what really makes a better craftsperson IS that attention to detail. Some people may be naturally gifted with dexterity and easy precision, many more have to work to get the skills - we're all capable of learning what needs to be done, but it's the mindset that ultimately sets the craftsman apart from the jobbing carpenter/builder/etc.
That shine is to die for!✌️
I’m just a simple woodworker and when I saw you stain that burl black I was horrified, thinking why would you do that. The end result sure showed me why you did that! That would have to be the most amazing finish that I’ve ever seen in my life. Absolutely beautiful.
By the way.... You HAVE actually earned my subscription, Cam. Really happy with the story involved almost every single time. I have been watching for years, as well. So, very inspired to design further than I normally do. Thanks, Cam! Hard work in design is under rated!
Could you do a total cost breakdown into a project like this? When a piece sells for $9,900, how many hours of work total, material cost, equipment cost, electricity (maybe a bit harder to break down but I'm sure it has an impact when using drills and electric sanders. Amazing piece!
That isn't just woodworking (it is definitely that!). That is art. Timeless, unquestionable Art. And with the addition of the Flexispot, kinetic as well. wow.
It’s so therapeutic to even just watching you carving moulds out of the wood. Thrilled to see the end result is such a beautiful piece.
Темный конечно!(black), 👍.
И что мне понравилось больше всего- это открытость, не прячет способы,методы и процесс изготовления,молодец!
Dark, absolutely amazing!!!! I am not a wood worker, but I can watch you videos forever. They're incredibly informative and the tips you give are honest for those starting out. Thank you.
The dark finish is incredible. I typically do small woodworking projects with contrasting wood, hand cut dovetails, some inlays, some epoxy inlays. With the lighter colored wood by itself I hadn't achieved the look I wanted. I played around with alcohol dyes using what I had, my printers used cartridges. Got some great results and pretty much unlimited color combos. I really like how the black you used turned out, stunning. You put in a lot of time on your pieces, it shows. Very nicely done.
I have been a woodworker for 52 years, professionally. I watch this and see all the tricks to reach the goal of achievement. Just as I have. I specialize in custom entertainment builds with every bell and whistle. I have build at least a dozen or so of tables but always ordered the slabs from a fabricator like like yourself. I wish I had the gadjetrty you use, All by had here! I am retired now and have sold my shop. You brought it all back for me, Thank you
Темный сносит мозг от великолепия. Спасибо за твою работу, чувак!
Dark.
I'm literally in awe over that dark finished table, it's the most beautiful piece of woodwork I think I've ever seen. You have turned a beautiful product of nature into something even more sublime. Amazing job!
I like the dark piece better. They’re both done absolutely beautifully, but that depth you got with all that work and how dark it became, was amazing!! That table looks awesome! Nice work!👌🏼
Thanks bud!
@@BlacktailStudio No need to feel guilty. A thing is worth what people will pay for it.
What you make will last for centuries, if looked after. It will also increase in value as it becomes antique.
Look how much some people pay for gimmick technology, even top marques to drive around in, clothes too and none of that will last nearly so long nor will still be useful in a few years.
If anything you might be under pricing.
Dark is absolutely breathtaking. I'm working on my first real decorative table this week, you've been an incredible inspiration! Thanks!
That dark wood is STUNNING! It reminds me of those magnificent black Percheron draft horses that just gleam in the sun!
Making tables look like guitar bursts is a fantastic idea and I don’t think I ever seen anyone do that before! Would really love to see a dark to blue or purple burst on a table.
guitar is bit different than a table. I don't think I would like to have a purple table, but that's just me, a woman.
Disagree, would love to see a dark purple table and I'm not just a woman, I'm an OLD woman.@@joannayw5272
Light and Dark, I think Both of them are very nice.
I'm about to make a table or a guitar one and I plan to do a purple metallic with this stuff called unicorn spit I don't know I just found it and I think it would be good idea I'm so it's odd that you wanted to see something like that so when I get done with that I'll try to send you some pics if you're interested
The light one is amazing, love the dye of the dark but the natural wood truly shines. As for feeling like a fraud/imposter at times, I feel like that's a feeling every wood worker gets as they grow and learn, I think it's a sign of self awareness and an ability to evolve
light or dark? Both are beautiful. I think the best part of this video is your attitude. I definitely agree with you about caring more beats out skill, cause it doesn't matter how much you know if you can't be bothered to apply it. I love that you're so down-to-earth, and talk about your mistakes, and the helpful tips you've figured out along the way! while you turn out amazing pieces. It annoys me when people say "Literally" to mean not literally!!
That is often why talented hobbyists can outperform seasoned professionals: they can put all their care into what they are making, while the professional may have a hard deadline and has to ship the thing with known flaws.
That is also the downfall of the perfectionist (including many hobbyists): not actually getting anything finished ever, because it is not perfect.
Dark is so beautiful... very inspirational. It's just one of those things you can't put your finger on, but it's such a pleasure seeing the finished product.
Dark! That thing is stunning! And thank you for not editing our all the mistakes! It’s helpful to see the fixes and workarounds! Good stuff.
Dark desk is absolutely beautiful, and I'm encouraged to strive for the level of perfection that you demonstrate. Please keep the videos coming.
Did not think that the dark approach would be as good but am amazed to say that it knocks spots off of the plain finish. Just goes to show what can be done with patience and determination!
Light versus Dark?
Dark versus Light?
Oh my goodness! At the very beginning, I couldn’t understand why you would want to make one of the cuts so dark and “spoil” it? I love light coloured wood and I am fortunate to own a lovely dining table and chairs, made over forty years ago, from a mix of ash and light oak. I still love using them.
WoW 😮, I watched with fascination how you stained the dark side (I might have tried adding a touch of deep red or burnt sienna stain to the middle to “warm” the central area) but I couldn’t stop watching every detail as you went through the polishing process! I’m a convert! I LOVED the dark finish!
I wish that I’d found your RUclips a couple of years ago - I can’t imagine how many videos I need to watch to catch up with your more current creations?!
Thank you for sharing your talents
Hazel
(I’m from Manchester, England)
Dark! Probably the nicest piece I've seen. The pride you have for your work is unreal. Excellent work, video, everything. Amazing!
Dark! and ditto on all the compliments on your diligence, hard work and gorgeous results
Dark all the way! I'm usually a light kinda guy too. I love all woods and their natural beauty but the contrast the dark finish provides is such a beautiful statement. Well done Cam.
Dark stains are so pretty when done well. The attention to detail you give to your pieces is what makes you stand out. This was a gorgeous build
Looks like $hit. B honest = total waste of some interesting wood. Should have used red or pretty much any other color.
@@Deathrape2001 yeah you couldve done loads better
@@Deathrape2001 please post a link to your woodworking skills
@@nick11jl What I do or don't do has nothing 2 do with the fact the anti-color of that table is a mistake, U troll. Tell us next how my shoe size controls the path of hurricanes =))
Hello meghaffer😊
This table top might be kind of simple to some woodworker but I'm not a woodworker but I love watching woodworking videos (especially blacktail videos), and this table top looks absolutely flawless as usual...Sick work man!!
How beautiful is that! I don’t particularly like live edge tables, but seeing your approach and the finishes that you strive for puts your tables into another league. This is a masterpiece!
The dark table looks AMAZING. The fad from the outside to in looks perfect. Thank you for sharing your tips,. It definitely helps to understand the process from start to finish....
The dark table is beautiful work. The fade that you got on it is amazing and just genuinely amazing work. Has got me wanting to try make my own table now. The amount of time, effort and care you put into your work really shows.
Light. I am just a "Mr. Natural" kind of guy. Congrats, your success is your own. Glory to God
When the stain first went on I thought you ruined that gorgeous piece of wood by going too Dark, but as you went through subsequent sanding and staining sequences I thought it became more and more amazing. Turned out just awesome in the end. Team Dark all the way on that
Dark is fantastic. I appreciate you sharing how you learn and where you get inspiration.
Dark, I am a 46 year old dude that has just found the relaxation, joy, and extreme frustration of wood working. I have been looking at video after video for ideas, inspiration, and knowledge. I just wanted to say thank you for reminding me that is ok to screw up. You are quite educational and incredibly impressive to watch. Thank you for your content, I did subscribe and will be waiting for your next video.
I messed up a picture frame one time, the table saw fence moved on me and messed up my cut, but after finding a solution, it actually came out better than how I was going to do it in the first place.
That dark one looks beautiful! You are so skilled, and I hate that people can't just enjoy nice things. I also love how honest you are. Beautiful work and amazing skill! That standing desk is dope too! Almost makes me want one lol!
“Dark for me”
The Mirka mesh sanding paper works soooo good! I use it everyday and i love it.
It’s not working for everything but when it works, it works great
Dark, you have had my subscription for a while, I just don't post much. You are far from a fraud, the attention to detail and commitment to get even the "tedious" tasks perfect is what makes you a professional woodworker. Some of us may have been woodworking longer, but that does not make us better, you are the best at these types of tables I have seen. Keep it up, I love to see what you create.
Congratulations you have been selected among our shortlisted winner, text the number above ^^^^^^^^^^^^^^^^^^^🎁✅
I have to agree. I am a professional welder, have been for 32 years. What makes a professional is taking the time to make thing the way you would want them to be if you were spending that money for yourself to buy the product. NEVER take shortcuts and ALWAYS fix what you know just isn't quite right
Honesty, humility and sharing knowledge will always benefit you and everyone around you. Great video.
and caring about your watchers would benefit even more.
@@AShoreThing You saying he doesn't?
When you start polishing with the machine start it on its lowest setting to spread the polish around, then increase the speed.
That way you won’t get all the splatter on polish everywhere.
Also a good idea to ‘prime’ the pad first to make sure you don’t have any dry spots on the pad.
Finally you should use your air compressor to blow out the pad regularly so you remove any contamination that could cause scratches in your finish.
Hope that helps 👍
That power tool may only have two states: ON and OFF. They are torquey too, so even just bumping the trigger causes high RPMs.
@@lerkzor Very easy to burn the finish with the polisher, even with the super fine polishing compound. Ask me how I know.
Oh my goodness… LIGHT & DARK! They are both stunning… If I was forced to pick only one, I would go with… dark, I suppose, because I’m not used to seeing such a gorgeous dark/black stain. I stumbled on your channel and now I can’t stop watching you work. I love woodworking , and I’ve made a couple things myself, but not for many, many years. Thank you for sharing it with us!❤
P. S. If it was nice to see you smile…
I can't choose..I would love either. Having grown up with someone who did a 'little' woodworking, your comment about the tools is spot on! I. myself, am a knitter and spinner. I've spent more money on a fleece then on a commercial yarn to make a sweater. For me, spinning is not a cost saving measure but a quality control measure. I can buy the fiber I want and make the yarn I want. Bonus for me is the complete enjoyment I get from the whole process.
Light or Dark? Oh my gosh. They are both beautiful, but the work and care you put into that dark finish... just wow. It glows with the effort as much as the finish. Amazing work.
I am by no means any kind of woodworker, matter of fact am an almost 70-year-old woman with RA however your work is incredible and been watching you for a while...I realized that I had never made a comment to you and wanted you to know that there, I know, have to be others that just love the wonderful work you do. You are amazing, please keep up the great work and videos which for me are extremely entertaining and love seeing the whole process, yes, including you keeping any errors you might do. I hope you see this comment, being so many in here am sure you keep extremely busy with all you do. That table looks awesome like most that you do!
You took the words out of my mouth. I've been a woodworker for way too many years (I'm only 69 & a 1/2.) to not appreciate the effort and dedication shown in these videos.
Be well and satisfied!
I love his videos too
Dark. Absolutely impressed and taken aback by the labor this requires. So well done. So humble and transparent. Thank you for making the video on top of that. Definitely subscribed.
It's a toss-up between light and dark they're both very beautiful. It amazes me how you take a chunk of wood and make it into a functional masterpiece plus take the time to do an individual tutorial love your work man.
As a guitar maker and finisher of guitars... your video is on point. PLUS, it's given me new ideas for making even "more better" guitar bodies. Thanks! EDIT: That came out so beautiful I'd pay $20,000 for that table. WOW.
Dark. I spent my working life as a jewellery polisher, so precious metals were my thing. I appreciate your comments on folks who care about their work more than some others. Your work is a joy to watch. Thank you.
Dark. This is one of my favorite pieces you've made.
“care more than other guy”. Love it. If only more people had that state of mind - imagine how great this world could be.
Dark
Dark, love how you went through the different stages of sanding to get the dark to light fade. I also appreciate the way you don't just look at wood as an "only wood workers know how" for the polishing and finishing of your work but go out and see what other trades ( car detailer) would do to get the finish your after. Top job once again 👍🏻
@Repent and believe in Jesus Christ TOTALLY INAPROPERATE. KEEP YOUR RELIGON TO YOUR SELF!!!!
@Repent and believe in Jesus Christ Religion is like a blind man looking in a black room for a black cat that isn't there, and finding it.
@@seanhall6265 touché 😆😆😆
Light or dark- I fell in love with this piece. First time on the channel you can bet it wont be my last. I'm really new into woodworking and found every second of techniques & tips to be inspiring for my tiny home project. I'll keep adding improvements to my tiny home till I can make something rivaling the quality of that desk.
First time viewer I was a car detailer in the 1970s and even back then we used a lot of the same techniques just different products. I think it’s easier today to get results that you want then in the 70s. If I made a mistake it could be catastrophic. Enjoyed your work and good luck in the future.
Dark for sure! That desk finish is just beautiful! The depth you achieved is just amazing and truly worth all the steps and detail involved.
Dark, that table was absolutely the most beautiful desk I’ve ever seen. Good job.
Dark. Your content is truly inspiring. I've spent (way too) many hours the past few days watching your videos and I have to say your work is definitely contributing towards my dream of having my own woodworking shop one day. I'm not practising any woodwork as of today, but just recently it has become my go-to content on youtube, and you have become one of my favorite content creators since then. Thank you!
Dark- when you first stained it, i thought "Oh no!". But the finished product is beautiful. I really appreciate your candid comments. I have learned a lot from you including the ability to throw it out! Thanks, Cam.
This is the first video of yours I’ve seen. I love your personality/humor. And your woodworking!
Dark - you can also use “penetrating epoxy” from the stone industry instead of thinning down regular epoxy. There are a lot of diamond tooling pads and such from the stone industry that you could incorporate into your process that will help you save time and money, as well as improve what you are already doing when it comes to polishing - it’s all basically the same thing regardless of whether it’s wood or stone. Nice job - well done !!!
Dark, so beautiful! Well worth the extra time.
This is beautiful. As a sit/standing desk user though, cable management is a big deal. When I put my desk top on the electronic components, I had to create a recess/box attached under the desk for all the monitor, speaker and peripheral cables, so that the desk could go up/down without a mess of cables being dragged around. If you do this again, it'd be great to see what solutions you could come up with for this.
Instead of the C channel use aluminum extrusion and recess it. Then you could put bolts for accessories under
@@millhouse782 genius
DARK. another huge difference between you and other channels is that you put so much effort into commentary. keeps the video alive during the "boring" parts (which aren't boring) and ensures constant engagement. love it!
Dunkel gefällt mir viel besser. Die Einzigartigkeit dieses Tisches ist beeindruckend. Danke für das tolle Video.
Light and Dark - I have to admit when you first applied the dark stain I though the slab was absolutely ruined. Then you kept working it, and your patience paid off. It looks stunning - way better than I thought it would!
As a longtime woodworker myself, the tips and tricks about "working" the wood are always appreciated and do help the non-woodworkers understand your process. I'm not a big fan of the trendy epoxy thing, as I really like to accentuate the beauty of natural woods and even hesitate to add stain to natural hard and softwood, so i don't hide the grain. So...after all that work and money you spent on this build it looks to me like plastic laminate. Sure I can still see some grain, but that beautiful burl got lost in the stain and high gloss polishing.
But heck...that's why they make chocolate AND vanilla...
But who would ever prefer chocolate!??!?!? 😆
It honestly made my day to see a reply in the comments on a craftsman's video that disagreed, but was still positive and respectful. My hope for humanity is restored just that little bit more. Thank you for doing good!
I love dark wood tables so much! Killer job! I think anyone trying something they have never done before should be a perfectionist. For you to have been doing this for 7 years I am not surprised it came out so well.
I have been a carpenter for 50 years and your work is awsome
Dark. I'm a woodworker myself, mostly cabinets but with the occasional cutting board thrown in. I stand in awe of your attention to detail not to mention the incredible job you do with your finishing. My hats off to a true craftsman.
That darker desk looks amazing. The grain detail and the effort you put in all comes out amazing. I’m a huge fan of PRS guitar finishes and you’re taking their 10 top premium woods/finishes and bringing it into desks/tabletops. Amazing work and excellent video, thanks Cam!
Dark:
When you started on the staining I thought that you'd lost the plot on such a beautiful piece of timber. Oh how mistaken was I, the end result is amazing. It would be interesting to see your treatment of the brother slab without staining it and keeping the natural colour.
Please keep sharing your amazing work. Thank you!
About a month ago is when he made the other table.
I am always blown away by your commitment to excellence. What a magnificent masterpiece you created for this video. It looks like an aerial view of some mysterious planet's landscape. Absolutely gorgeous!
Dark. I'm a little embarrassed to say this is your 1st video I've come across. I could watch you do this for hours. Well done, sir. Beautiful piece of furniture.
Well said
omg, drama queen
Ive watched so many if their videos. They do amazing work
Dark aswell. I too feel and could do the same! I relay the same sentiment.
You’re not an “I Just Got Lucky” kinda woodworker. The painstaking work you put into your tables is awe-inspiring, and I love the eye-popping reveal. On another note, I’m a subscriber, have hit the bell, but missed the notice on this video for some reason. Glad I found it.
Blacktail: You should be charged with grammar fraud! At about 1:00 minute into this video: "I'm not doing anything that anybody could do if they just put their minds to it." OUCH!
@@davesmith5656
You’re certainly one of the guys that corrects people who say “I could care less”, which ironically applies to those who care the most down to those who care the least, instead of saying the more stinging, “I could NOT care less” said barely moving the lips and with a small hair flip as they turn away like I did when I read your comment.
Arncha?
@@Itstheoutputs ---- For a minute there I thought you were going to be funny ... but I see you are not.
@@Itstheoutputs
Did you literally flip your hair and turn away? 😁
Amazing how many times "luck" follows hard work
Dark, you, sir, have an incredible ability to persevere through your frustrations. I learn more with every video. Thank you for sharing your inner process, along with the physical process.
Congratulations you have been selected among our shortlisted winner, text the number above ^^^^^^^^^^^^^^^^^^^🎁✅
Don't fall for the scammer.
@@victorsteen73 Your negativity is unwelcome.
I absolutely love your stuff I just don’t like staining wood in general. I know a lot of people don’t agree I just think it looks better natural
your rational, sharp humbleness while working is amazing to watch. A lot of us (at least me) are using your videos to efficiently distract from struggles we can't or won't do anything about - and it's great to learn and get inspired while doing so. keep it up man!
Well said
ditto
Dark ! I don't comment on videos that much, more of a lurker viewer, but man, I really enjoy looking at the dedication and passion you put in your work ! I'll be thrilled to be able to afford even your trashed projects at this point ! Thanks for sharing, and congrats for your incredible work !
Dark was amazing great idea with the guitar reference for inspiration! If i was not living in an apartment and strapped i could definitly want to do what you do. My grandfather loved making things in a woodshop and so did my father. Woodshop for me was one of the few things i did in highschool that i loved. Even 15 years later i still remember the smell of woods and the feeling of finishing my first cutting board. i sanded that thing into oblivian to get that glass like feel i wanted. Thank you though for the bit of time i spent watching i really loved it. Thank you for sharing.
Dark…it’s absolutely nuts how those two tables are from the same slab 😮 stunning work
Light natural color is nice. I use epoxy a lot in boat building, there are a couple things I might suggest:
When using West Systems epoxy, use the 207 hardener instead of the 205. It is designed for clear coating applications. While adding the black to your epoxy probably protects you, the 205 hardener can get cloudy after it has cured.
When applying epoxy to bare wood, I always do it while the temperature in my shop is falling - getting cooler. I heat my shop up over 80° for a few hours before doing the work and then turn down the heat during the process. This causes the air trapped in the wood to contract, drawing epoxy in. If the shop gets warmer during the cure it can drive air out, causing bubbles. Warming the wood will also lower the viscosity of the epoxy, allowing it to penetrate deeper without adding solvents. Adding solvents is OK, but degrades some of the physical properties of the epoxy and slows down curing.
If you are going to sand the surface level, get long boards with dust collection, it keeps the paper from loading up. Mirka Abranet has some great hand sanding tools with dust collection.
Be careful using tack cloths on a surface that you are going to coat with epoxy. The waxes used to make the tack clothes are not compatible with epoxy and can cause fisheyes and other issues if any should get on the surface. Obviously, it is possible to use a tack cloth before epoxy without issues, but when it doesn't work, it can cause horrendous problems.
Epoxy is not good with UV. Even "UV stabilized" epoxy will eventually start breaking down due to sun exposure. My research suggest that UV stabilized epoxy is designed for about 1,000 hours of sun exposure. For furniture in a house, this is probably a very long time, but it is just a matter of time. The ceramic coating you apply should help extend the live of the finish, but I always apply a UV protective clear coat to all my epoxy coated boats. A varnish or even better a 2-part automotive style clear coat will produce a much longer lasting finish.
Well thank you for sharing that regular epoxies cannot stand UV rays. I did not know that and always dried my items in direct sunlight. I live in Florida and the humidity turns my work into crap.
@@WarPigstheHun The effects of UV happen over time. It breaks down the bonds between epoxy molecules. Placing epoxy out in the sun should not do much to damage the epoxy.
However, placing wood coated with wet epoxy out in the sun will cause air in the wood to out-gas. This can cause a serious problem with bubbles.
Working with epoxy in humidity may cause a problem with amine-blush, a waxy substance caused when epoxy cures in a humid environment. This waxy substance can show up on the surface of the epoxy and must be cleaned off before any other stuff is applied over it.
Blush can also occur in the epoxy matrix and may appear as clouding in the epoxy over time. The 207 vs 205 West Systems hardener resolves this issue.
@@NickSchade gawd, I wish my garage had AC. I have a small Ryobi fan that I sometimes use to help cure things and repel moisture. Maybe I'll buy more of those fans as a cheap solution to the blush and bubbling.
That dark table is absolutely stunning . It looks more like artwork than a piece of furniture . You make it look easy.
The Dark One really looks amazing, you did that gradient spot on. I also admire your skills at really finishing it with a perfect shine that's so much more obvious with the dark tint underneath. As someone who dabbles with car detailing and a little bit of body work, I wish my car was THIS shiny. When I get around to refinishing it next time, I really need to have more patience and take two days to do it. Thank you for this wonderful video!
What car knob are you polishing?
Hello Evelyne 👋
Dark against such a solid piece really makes a great desk. I'm sure that makes an amazing computer desk. My Walmart folding table provides enough function, but that piece is just a work of art. Good Job!